Consequences of stratospheric ozone depletion and climate change on the use of materials

Photochemical and Photobiological Sciences

Volumn 14, Issue 1, 2015, Pages 170-184

  Andrady, A L ^a   Torikai, A ^b   Redhwi, H H ^c   Pandey, K K ^d   Gies, P ^e  

^a North Carolina State University   (United States)

^b Materials Life Society of Japan   (Japan)

^c KING FAHD UNIVERSITY OF PETROLEUM AND MINERALS   (Saudi Arabia)

^d INSTITUTE OF WOOD SCIENCE AND TECHNOLOGY   (India)

^e AUSTRALIAN RADIATION PROTECTION AND NUCLEAR SAFETY AGENCY   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84919657412     PISSN: 1474905X     EISSN: 14749092     Source Type: Journal    
DOI: 10.1039/c4pp90038c     Document Type: Review

References (154)

1. Plastics Europe, Plastics Facts 2012, Plastics Europe, http://www.plastics europe.org, accessed August, 2014.
2. T. Ojeda, Degradability of linear polyolefins under natural weathering, Polym. Degrad. Stab., 2011, 96, 703-707.
3. V. Sharratt, C. A. Hill and D. P. Kint, A study of early colour change due to simulated accelerated sunlight exposure in Scots pine (Pinus sylvestris), Polym. Degrad. Stab., 2009, 94, 1589-1594.
4. A. F. Bais, R. L. McKenzie, P. J. Aucamp, M. Ilyas, S. Madronich, G. Bernhard and K. Tourpali, Ozone depletion and climate change: Impacts on UV radiation, Photochem. Photobiol. Sci., 2015, 14, this issue.
5. IPCC, Intergovernmental Panel on Climate Change Working Group I Contribution to the IPCC Fifth Assessment Report Climate Change 2013: The Physical Science Basis, Report No., University Press, Cambridge, United Kingdom and New York, NY, USA, 2010.
6. M. C. Celina, Review of polymer oxidation and its relationship with materials performance and lifetime prediction, Polym. Degrad. Stab., 2013, 98, 2419-2429.
7. J. L. Pablos, C. Abrusci, I. Marín, J. López-Marín, F. Catalina, E. Espí and T. Corrales, Photodegradation of polyethylenes: Comparative effect of Fe and Ca-stearates as pro-oxidant additives, Polym. Degrad. Stab., 2010, 95, 2057-2064.
8. S. M. Al-Salem, Influence of natural and accelerated weathering on various formulations of linear low density polyethylene (LLDPE) films, Mater. Des., 2009, 30, 1729-1736.
9. J. Lee-Taylor, S. Madronich, C. Fischer and B. Mayer, A Climatology of UV Radiation, 1979-2000, 65S-65N, in UV Radiation in Global Climate Change: Measurements, Modeling and Effects on Ecosystems, eds. W. Gao, D. Schmoldt and J. R. Slusser, Springer-Verlag and Tsinghua University Press, 2010, pp. 1-20.
10. E. Moretti, M. Zinzi and E. Belloni, Polycarbonate panels for buildings: Experimental investigation of thermal and optical performance, Energy Build., 2014, 70, 23-35.
11. C. Buratti and E. Moretti, Glazing systems with silica aerogel for energy savings in buildings, Appl. Energy, 2012, 98, 396-403.
12. S. Kubba, Green Building Materials and Products, in Handbook of Green Building Design and Construction, ed. S. Kubba, Butterworth-Heinemann, Boston, 2012, pp. 227-311.
13. G. Akovali, Plastic materials: polyvinyl chloride (PVC), in Woodhead Publishing Series in Civil and Structural Engineering, eds. F. Pacheco-Torgal, S. Jalali and A. Fucic, Woodhead Publishing, 2012, pp. 23-53.
14. FerroCorp, Ferro and PolyOne target LDPE and PVC foams with K debuts, Addit. Polym., 2014, 1, 4-5.
15. Arkema, PVC processing aid from Arkema Inc. sets new standards, Addit. Polym., 2011, 2011, 2-3.
16. Arkema, Arkema unveils new impact modifier for window profiles, collaborates with Purac, Addit. Polym., 2010, 2010, 2-3.
17. Akcros, Akcros USA announces new series of stabilizer products for PVC, Addit. Polym., 2010, 10, 1-2.
18. ISP, International Speciality Products reveals new additives family for high-performance PVC applications, Addit. Polym., 2010, 2010, 1-2.
19. D. Sil and S. Chakrabarti, Photocatalytic degradation of PVC-ZnO composite film under tropical sunlight and artificial UV radiation: A comparative study, Sol. Energy, 2010, 84, 476-485.
20. A. Amar and A. V. Parisi, Spectral response of solvent-cast polyvinyl chloride (PVC) thin film used as a long-term UV dosimeter, J. Photochem. Photobiol., B, 2013, 125, 115-120.
21. A. L. Andrady, Wavelength sensitivity of common polymers: A Review, Adv. Polym. Sci., 1996, 128, 45-94.
22. A. L. Andrady and N. D. Searle, Photoyellowing of mechanical pulps II Activation spectra for light-Induced yellowing of newsprint paper by polychromatic radiation, Tech. Assoc. Pulp Pap. Ind. J., 1995, 78, 131-138.
23. A. Heikkilä, P. Kärhä, A. Tanskanen, M. Kaunismaa, T. Koskela, J. Kaurola, T. Ture and S. Syrjälä, Characterizing a UV chamber with mercury lamps for assessment of comparability tonatural UV conditions, Polym. Test., 2009, 28, 57-65.
24. BCC Research Market Forecasting, Global market for wood-plastic composites to pass 46 million metric tons by 2016, http://bccresearch.blogspot.ca/2011/11/global-market-for-wood-plastic.html. VC6DtxYd7WU, accessed August, 2014.
25. S. K. Najafi, Use of recycled plastics in wood plastic composites - a review, Waste Manage., 2013, 33, 1898-1905.
26. L. Sobczak, R. W. Lang and A. Haider, Polypropylene composites with natural fibers and wood - General mechanical property profiles, Compos. Sci. Technol., 2012, 72, 550-557.
27. C. Homkhiew, T. Ratanawilai and W. Thongruang, Effects of natural weathering on the properties of recycled polypropylene composites reinforced with rubberwood flour, Ind. Crops Prod., 2014, 56, 52-59.
28. S. Y. Leu, T. H. Yang, S. F. Lo and T. H. Yang, Optimized material composition to improve the physical and mechanical properties of extruded wood-plastic composites (WPCs), Constr. Build. Mater., 2012, 29, 120-127.
29. B. Nörnberg, E. Borchardt, G. A. Luinstra and J. Fromm, Wood plastic composites from poly(propylene carbonate) and poplar wood flour - Mechanical, thermal and morphological properties, Eur. Polym. J., 2014, 51, 167-176.
30. C. Guo, L. Li and Q. Wang, Investigation on the compatibilizing effect of m-isopropenyl-α,α-dimethylbenzyl isocyanate grafted polypropylene on polypropylene and wood flour composites, Wood Sci. Technol., 2012, 46, 257-270.
31. Y. Lei and Q. Wu, Wood plastic composites based on microfibrillar blends of high density polyethylene/poly-(ethylene terephthalate), Bioresour. Technol., 2010, 101, 3665-3671.
32. K.-C. Hung, Y.-L. Chen and J.-H. Wu, Natural weathering properties of acetylated bamboo plastic composites, Polym. Degrad. Stab., 2012, 97, 1680-1685.
33. N. Ayrilmis and A. Kaymakci, Fast growing biomass as reinforcing filler in thermoplastic composites: Paulownia elongata wood, Ind. Crops Prod., 2013, 43, 457-464.
34. M. A. Binhussain and M. M. El-Tonsy, Palm leave and plastic waste wood composite for out-door structures, Constr. Build. Mater., 2013, 47, 1431-1435.
35. M. C. N. Yemele, A. Koubaa, A. Cloutier, P. Soulounganga and M. Wolcott, Growth of ZnO nanofilms on wood with improved photostability, Holzforschung, 2010, 64, 385-390.
36. S. H. Ghaffar and M. Fan, Structural analysis for lignin characteristics in biomass straw, Biomass Bioenergy, 2013, 57, 264-279.
37. A. Naumann, I. Stephan and M. Noll, Material resistance of weathered wood-plastic composites against fungal decay, Int. Biodeterior. Biodegrad., 2012, 75, 28-35.
38. S. Butylina, M. Hyvärinen and T. Kärki, Accelerated weathering of wood-polypropylene composites containing minerals, Composites, Part A, 2012, 43, 2087-2094.
39. J. S. Fabilyi, A. G. McDonald, M. P. Wolcott and P. R. Griffiths, Wood plastic composites weathering: Visual appearance and chemical changes, Polym. Degrad. Stab., 2008, 93, 1405-1414.
40. D. B. Dittenber and H. V. S. Ganga Ra, Critical review of recent publications on use of natural composites in infrastructure, Composites, Part A, 2012, 43.
41. C. H. Lee, K. C. Hung and Y. L. Chen, Effects of polymeric matrix on accelerated UV weathering properties of woodplastic composites, Holzforschung, 2012, 66, 981-987.
42. K. Chaochanchaikul, V. Rosarpitak and N. Sombatsompop, Photodegradation profiles of PVC compound and wood/PVC composites under UV weathering, eXPRESS Polym. Lett., 2013, 7, 146-160.
43. K. Xie, Y. Wang and L. Xu, Modification of cellulose with reactive polyhedral oligomericsilsesquioxane and nanocrosslinking effect on color properties of dyed cellulose materials, Carbohydr. Polym., 2010, 80, 480-485.
44. 2 stabilizers, Polym. Eng. Sci., 2011, 51, 1354-1365.
45. L. K. Krehula, Z. Katančić, A. P. Siročić and Z. Hrnjak-Murgić, Weathering of high-density polyethylene-wood plastic composites, J. Wood Chem. Technol., 2014, 34, 39-54.
46. th Wood Fibre Polymer Composites International Symposium, Institut Technologique, Bordeaux, France, 2009.
47. M. Manceau, A. Rivaton, J. L. Gardette, S. Guillerez and N. Lemaître, Light-induced degradation of the P3HT-based solar cells active layer, Sol. Energy Mater. Sol. Cells, 2011, 95, 1315-1325.
48. S. Jin, N. M. Stark and L. M. Matuana, Influence of a stabilized cap layer on the photodegradation of coextruded high density polyethylene/wood-flour composites, J. Vinyl Addit. Technol., 2013, 19, 239-249.
49. T. Qiang, D. Yu, A. Zhang, H. Gao, Z. Li, Z. Liu, W. Chen and Z. Han, Life cycle assessment on polylactide-based wood plastic composites toughened with polyhydroxyalkanoates, J. Clean. Prod., 2014, 66, 139-145.
50. R. Vidal, P. Martinez and D. Garrain, Life cycle assessment of composite materials made of recycled thermoplastics combined with rice husks and cotton linters, Int. J. Life Cycle Assess., 2009, 14, 73-82.
51. A. L. Andrady, Microplastics in the marine environment, Mar. Pollut. Bull., 2011, 62, 1596-1605.
52. S. L. Wright, R. C. Thompson and T. Galloway, The physical impacts of microplastics on marine organisms: A review, Environ. Pollut., 2013, 178, 483-492.
53. J. A. Ivar do Sul and M. F. Costa, The present and future of microplastic pollution in the marine environment, Environ. Pollut., 2014, 185, 352-364.
54. A. Bakir, S. J. Rowland and R. C. Thompson, Enhanced desorption of persistent organic pollutants from microplastics under simulated physiological conditions, Environ. Pollut., 2014, 185, 16-23.
55. J. P. G. L. Frias, V. Otero and P. Sobral, Evidence of microplastics in samples of zooplankton from Portuguese coastal waters, Mar. Environ. Res., 2014, 95, 89-95.
56. O. Setälä, F. V. Lehtinen and M. Lehtiniemi, Ingestion and transfer of microplastics in the planktonic food web, Environ. Pollut., 2014, 185, 77-83.
57. A. Geburtig and V. Wachtendorf, Determination of the spectral sensitivity and temperature dependence of polypropylene crack formation caused by UV-irradiation, Polym. Degrad. Stab., 2010, 95, 2118-2123.
58. L. Douminge, X. Feaugas, J. Bernard and S. Mallarino, Extrinsic fluorescence as a sensitive method for studying photo-degradation of high density polyethylene correlated with mechanical stresses, Curr. Appl. Phys., 2013, 13, 1751-1757.
59. L. Douminge, S. Mallarino, S. Cohendoz, X. Feaugas and J. Bernard, Extrinsic fluorescence as a sensitive method for studying photo-degradation of high density polyethylene Part 1, Curr. Appl. Phys., 2010, 10, 1211-1215.
60. M. Ramanujam, V. Wachtendorf, P. J. Purohit, R. Mix, A. Schönhals and J. F. Friedrich, A detailed dielectric relaxation spectroscopy study of artificial UV weathered low density polyethylene, Thermochim. Acta, 2012, 530, 73-78.
61. S. Kahlen, G. M. Wallner and R. W. Lang, Aging behavior of polymeric solar absorber materials - Part 1 Engineering plastics, Sol. Energy, 2010, 84, 1567-1576.
62. T. Imai, S. Takamatsu, K. Shiraishi, K. Marumoto and T. Itoh, Photovoltaic textiles manufactured with precision die coating, Procedia Eng., 2012, 47, 502-505.
63. A. J. Moulé, Power from plastic, Curr. Opin. Solid State Mater. Sci., 2010, 14, 123-130.
64. A. Bedeloglu, A. Demir, Y. Bozkurt and N. S. Sariciftci, Photovoltaic properties of polymer based organic solar cells adapted for non-transparent substrates, Renewable Energy, 2010, 35, 2301-2306.
65. Z. Zhao, L. Rice, H. Efstathiadis and P. Haldar, Annealing and thickness related performance and degradation of polymer solar cells, Microelectron. Reliab., 2013, 53, 123-128.
66. M. D. Kempe, Ultraviolet light test and evaluation methods for encapsulants of photovoltaic modules, Sol. Energy Mater. Sol. Cells, 2010, 94, 246-253.
67. O. Haillant, Accelerated weathering testing principles to estimate the service life of organic PV modules, Sol. Energy Mater. Sol. Cells, 2011, 95, 1284-1292.
68. M. Kempe and J. Wohlgemuth, Evaluation of Temperature and Humidity on PV Module Component Degradation, in Proceedings of the 39th IEEE Photovoltaic Specialists Conference, June 16-21, 2013, Tampa Convention Center in Tampa Bay, FL, 2013.
69. E. S. Kopp, V. P. Lonji, A. E. Brooks, P. L. Hidalgo-Gonzalez and A. D. Cronin, I-V curves and visual inspection of 250 PV modules deployed over 2 years in Tucson, Paper presented at the 38th IEEE Photovoltaic Specialists Conference, Austin Convention Center in Austin, TX, 2012.
70. NREL, Photovoltaic Module Qualification Plus Testing National Renewable Energy Laboratory National Renewable Energy. Laboratory Report No. NREL/TP-5200-60950 Golden, CO, December 2013, p. 30.
71. F. J. M. Johannes, G. Reisinger, T. Hofmann, J. Hinken, H. Tantau, A. Ulbrich, S. Lambrecht, B. V. Elsner and U. Schurr, Glass-film-combination: Opto-physical properties and energy saving potential of a novel greenhouse glazing systems, Energy Build., 2012, 50, 298-307.
72. C. Lamnatou and D. Chemisana, Solar radiation manipulations and their role in greenhouse claddings: Fluorescent solar concentrators, photoselective and other materials, Renewable Sustainable Energy Rev., 2013, 27, 175-190.
73. A. M. Abdel-Ghany and I. M. Al-Helal, Solar energy utilization by a greenhouse: General relations, Renewable Energy, 2011, 36, 189-196.
74. C. Espejo, A. Arribas, F. Monzó and P. P. Díez, Nanocomposite films with enhanced radiometric properties for greenhouse covering applications, J. Coat. Technol. Res., 2012, 5, 2017-2209.
75. J. F. Bornman, P. W. Barnes, S. A. Robinson, C. L. Ballaré, S. D. Flinte and M. M. Caldwell, Solar ultraviolet radiation and ozone depletion-driven climate change: effects on terrestrial ecosystems, Photochem. Photobiol. Sci., 2015, 14, This issue.
76. Clariant, Clariant introduces stabilizers for UV protection of greenhouse films, Addit. Polym., 2013, 2013, 3-4.
77. A. Dehbi, A. Hamid, I. Mourad and A. Bouaza, Degradation assessment of LDPE multilayer films used as a green house cover: Natural and artificial aging Impacts, J. Appl. Polym. Sci., 2012, 124, 2702-2716.
78. A. Dehbi, A. Bouaza, A. Hamou, B. Youssef and J. M. Saiter, Artificial ageing of tri-layer polyethylene film used as greenhouse cover under the effect of the temperature and the UV-A simultaneously, Mater. Des., 2010, 31, 864-869.
79. G. Oreski, G. M. Wallner and R. W. Lang, Ageing characterization of commercial ethylene copolymer greenhouse films by analytical and mechanical methods, Biosyst. Eng., 2009, 103, 489-496.
80. A. Al-Mahdouri, M. Baneshi, H. Gonome, J. Okajima and S. Maruyama, Sol. Energy Mater. Sol. Cells, 2013, 96, 21-32.
81. H. H. Redhwi, M. N. Siddiqui, A. L. Andrady and S. Hussain, Durability of LDPE nanocomposite with clay silica, and zinc oxide II. Weatherability of the nanocomposites, Polym. Compos., 2013, 34, 1878-1883.
82. H. H. Redhwi, M. N. Siddiqui, A. L. Andrady and S. Hussain, Durability of LDPE nanocomposites with clay Silica, and zinc oxide-Part 1: Mechanical properties of the nanocomposite materials, J. Nanocompos. Mater., 2013, 2013, 1-6.
83. R. Gaggino, Water-resistant panels made from recycled plastics and resin, Constr. Build. Mater., 2012, 35, 468-482.
84. C. Kingston, R. Zepp, A. L. Andrady, D. Boverfof, R. Fehir, D. Hawkins, J. Roberts, P. Sayre, B. Shelton, Y. Sultan, V. Vejins and W. Whlleben, Release characteristics of selected carbon nanotube polymer composites, Carbon, 2014, 68, 33-57.
85. P. Bijl, A. Heikkilä, S. Syrjälä, A. Aarva and A. Poikonen, Modelling of sample surface temperature in an outdoor weathering test, Polym. Test., 2011, 30.
86. O. Haillant, D. Dumbleton and A. Zielnik, An Arrhenius approach to estimating organic photovoltaic module weathering acceleration factors, Sol. Energy Mater. Sol. Cells, 2011, 95, 1889-1895.
87. A. Franc¸ois-Heude, E. Richaud, E. Desnoux and X. Colin, Influence of temperature, UV-light wavelength and intensity on polypropylene photothermal oxidation, Polym. Degrad. Stab., 2014, 100, 10-20.
88. L. Tolvaj, L. Persze and L. Albert, Thermal degradation of wood during photodegradation, J. Photochem. Photobiol., B, 2011, 105, 90-93.
89. L. Persze and L. Tolvaj, Photodegradation of wood at elevated temperature: Colour change, J. Photochem. Photobiol., B, 2012, 10844-10847.
90. L. Tolvaj and K. Mitsui, Correlation between hue angle and lightness of light irradiated wood, Polym. Degrad. Stab., 2010, 95, 638-642.
91. X. Wang, S. Liu, H. Chang and J. Liu, Sol-gel deposition of TiO2 nanocoatings on wood surfaces with enhanced hydrophobicity and photostability, Wood Fiber Sci., 2014, 46, 109-117.
92. J. Nässén, S. Hedenus, S. Karlsson and J. Holmberg, Concrete vs. wood in buildings - An energy system approach, Build. Environ., 2012, 51, 361-369.
93. R. M. Rowell, Handbook of wood chemistry and wood composite, Taylor and Francis, CRC Press, 2012.
94. P. D. Evans, S. Kraushaar Gibson, I. Cullis, C. Liu and G. Sèbe, Photostabilization of wood using low molecular weight phenol formaldehyde resin and hindered amine light stabilizer, Polym. Degrad. Stab., 2013, 98, 158-168.
95. G. Pajchrowski, A. Noskowiak, A. Lewandowska and W. Strykowski, Wood as a building material in the light of environmental assessment of full life cycle of four buildings, Constr. Build. Mater., 2014, 52, 428-436.
96. L. Gustavsson, A. Joelsson and R. Sathre, Life cycle primary energy use and carbon emission of an eightstorey wood-framed apartment building, Energy Build., 2010, 42, 230-242.
97. L. Tolvaj and D. Varga, Photodegradation of timber of three hardwood species caused by di fferent light sources, Acta Silvatic. Lignaria Hung., 2012, 8, 145-156.
98. V. Živković, M. Arnold, K. Radmanović, K. Richter and H. Turkulin, Spectral sensitivity in the photodegradation of fir wood (Abies alba Mill) surfaces: Colour changes in natural weathering, Wood Sci. Technol., 2014, 48, 239-252.
99. K. K. Pandey and T. Vuorinen, Comparative study of photodegradation of wood by a UV laser and xenon light source, Polym. Degrad. Stab., 2008, 93, 2138-2146.
100. G. Agresti, G, L. Bonifazi, G. Calienno, A. Capobianco, C. Lo Monaco, R. Pelosi, R. Picchio and S. Serranti, Surface investigation of photo-degraded wood by colour monitoring, infrared spectroscopy, and hyperspectral imaging, J. Spectrosc., 2013, 380536.
101. T. Volkmer, L. Arietano, C. Plummer, J. Strautmann and M. Noël, Loss of tensile strength in cellulose tissue on the surface of spruce (Picea abies) caused by natural photodegradation and delignification, Polym. Degrad. Stab., 2013, 98, 1118-1125.
102. C. M. Popescu, M. C. Popescu and C. Vasile, Structural analysis of photodegraded lime wood by means of FT-IR and 2D IR correlation spectroscopy, Int. J. Biol. Macromol., 2011, 48, 667-675.
103. A. L. Andrady, S. H. Hamid, X. Hu and A. Torikai, Effects of increased solar ultraviolet radiation on materials, J. Photochem. Photobiol., B, 1998, 46, 96-103.
104. A. Heikkilä and P. Kärhä, Photoyellowing revisited: Determination of an action spectrum of newspaper, Polym. Degrad. Stab., 2014, 99, 190-195.
105. th European Weathering Symposium: Natural and Artificial Ageing of Polymers, ed. T. Reichert, Gesellschaft fuer Umweltsimulation, Bratislava, Slovačka, 2013, p. 643363.
106. T. C. Chang, H. Chang, C. L. Wu, H. Y. Lin and S. T. Chang, Stabilizing eff ect of extractives on the photooxidation of Acacia confusa wood, Polym. Degrad. Stab., 2010, 95, 1518-1522.
107. P. Nzokou and D. P. Kamdem, Influence of wood extractives on the photo-discoloration of wood surfaces exposed to artificial weathering, Color Res. Appl., 2006, 31, 425-234.
108. D. Grifoni, L. Bacci, S. d. Lonardo, P. Pinelli, S. Scardigli, S. Camilli, F. Sabatini, G. Zipoli and A. Romani, UV protective properties of cotton and flax fabrics dyed with multifunctional plant extracts, Dyes Pigm., 2014, 105, 89-96.
109. C. Hu, G. Jiang, M. Xiao, J. Zhou and Z. Yi, Effects of heat treatment on water-soluble extractives and color changes of Merbau heartwood, J. Wood Sci., 2012, 58, 465-469.
110. J. Salla, K. K. Pandey, G. K. Prakash and K. M. Mahadevan, Photobleaching and dimensional stability of rubberwood esterified by fatty acid chlorides, J. Wood Chem. Technol., 2012, 32, 121-136.
111. B. Forsthuber and G. Grüll, The effects of HALS in the prevention of photo-degradation of acrylic clear topcoats and wooden surfaces, Polym. Degrad. Stab., 2010, 95, 746-755.
112. G. De Filpo, A. M. Palermo, F. Rachiele and F. P. Nicoletta, Preventing fungal growth in wood by titanium dioxide nanoparticles, Int. Biodeterior. Biodegrad., 2013, 85, 217-222.
113. P. D. Evans, Weathering of wood and wood composites, in Handbook of wood chemistry and wood composite, ed. R. M. Row, Taylor and Francis, CRC, 2012, pp. 151-213.
114. S. Vollmer and P. D. Evans, Performance of clear coatings on modified wood exposed to the weather for 2 years in Australia, Int. Wood Prod. J., 2013, 4, 177-182.
115. B. S. W. Dawson, A. P. Singh, H. W. Kroese, M. A. Schwitzer, S. Gallagher, S. J. Riddiough and S. Wu, Enhancing exterior performance of clear coatings through photostabilisation of wooden surfaces Part 2: Coating and weathering performance, J. Coat. Technol. Res., 2008, 5, 207-219.
116. P. A. van Meel, S. J. F. Erich, H. P. Huinink, K. Kopinga, J. Jong and O. C. G. Adan, Moisture transport in coated wood, Prog. Org. Coat., 2011, 72, 686-694.
117. P. L. Chou, J. T. Chang, T. F. Yeh and S. Chang, Characterizing the conservation effect of clear coatings on photodegradation of wood, Bioresour. Technol., 2008, 99, 1073-1079.
118. B. Lesar, M. Pavli, M. Petri, A. Seve, M. Skapin and M. Humar, Wax treatment of wood slows photodegradation, Polym. Degrad. Stab., 2011, 96, 1271-1278.
119. K. K. Pandey and K. Srinivasa, Study of UV resistance and natural weathering of coatings on chemically modified wood, International Research Group on Wood Protection Report No., Stockholm, Sweden, 2013.
120. S. Grelier, A. Castellan and L. Podgorski, Use of low molecular weight modified polystyrene to prevent photodegradation of clear softwoods for outdoor use, Polym. Degrad. Stab., 2007, 92, 1520-1527.
121. S. Olsson, J. M, M. Westin and E. Östmark, Grafting of 2-hydroxy-4 (2, 3-epoxypropoxy)-benzophenone and epoxidized soybean oil to wood: Reaction conditions and effects on the color stability of Scots pine, Polym. Degrad. Stab., 2012, 97, 1779-1786.
122. P. D. Evans, Review of the weathering and photostability of modified wood, Wood Mater. Sci. Eng., 2009, 4, 2-13.
123. I. Bhat, A. Khalil, K. B. Awang, I. O. Bakare and A. M. Issam, Effect of weathering on physical, mechanical and morphological properties of chemically modified wood materials, Mater. Des., 2010, 31.
124. K. Mitsui, Acetylation of wood causes photobleaching, J. Photochem. Photobiol., B, 2010, 101, 210-214.
125. M. Jebrane, G. Sèbe, I. Cullis and P. D. Evans, Photostabilisation of wood using aromatic vinyl esters, Polym. Degrad. Stab., 2009, 94, 151-157.
126. T. Yuan, L. M. Zhang, F. Xu and R. C. Sun, Enhanced photostability and thermal stability of wood by benzoylation in an ionic liquid system, Ind. Crops Prod., 2013, 53, 123-128.
127. S. I. Baur and A. J. Easteal, Improved photo-protection of wood by chemical modification with silanes: NMR and ESR studies, Polym. Adv. Technol., 2013, 24, 97-103.
128. D. Fauchadour, T. Jeanson, J. N. Bousseau and B. Echalier, Nanoparticles of cerium oxide, application to coating technologies, Paint Coat. Ind., 2005, 21, 88-93.
129. A. Saadat-Monfared and M. Mohseni, Polyurethane nanocomposite films containing nano-cerium oxide as UV absorber; Part 2: Structural and mechanical studies upon UV exposure, Colloids Surf., A, 2014, 441, 752-757.
130. F. Bezati, V. Massardier, J. Balcaen and D. Froelich, A study on the dispersion, preparation, characterization and photo-degradation of polypropylene traced with rare earth oxides, Polym. Degrad. Stab., 2011, 96, 51-59.
131. R. A. Mohammad, M. Mohseni, S. M. Mirabedini and M. H. Tabatabaei, Surface analysis and anti-graffiti behavior of a weathered polyurethane-based coating embedded with hydrophobic nano silica, Appl. Surf. Sci., 2012, 258, 4391-4396.
132. M. Rashvand, Z. Ranjbar and S. Rastegar, Nano zinc oxide as a UV-stabilizer for aromatic polyurethane coatings, Prog. Org. Coat., 2011, 71, 362-368.
133. M. V. Cristea, B. Riedl and P. Blanchet, Effect of addition of nanosized UV absorbers on the physico-mechanical and thermal properties of an exterior waterborne stain for wood, Prog. Org. Coat., 2011, 72, 755-762.
134. 2 and clay nanoparticles loading on weathering performance of coated wood, Prog. Org. Coat., 2013, 76, 1425-1429.
135. 2 and clay nanoparticles, Prog. Org. Coat., 2013, 76, 1543-1548.
136. B. Forsthuber, C. Schaller and G. Grull, Evaluation of the photo stabilising efficiency of clear coatings comprising organic UV absorbers and mineral UV screeners on wood surface, Wood Sci. Technol., 2013, 47, 281-297.
137. Q. Wang and P. J. Hauser, Developing a novel UV protection process for cotton based on layer-by-layer self-assembly, Carbohydr. Polym., 2010, 81, 491-496.
138. P. Gies and A. McLennan, Everyday and high-UPF sunprotective clothing, Melanom Lett., 2012, 30, 7-8.
139. H. Z. Maged, B. E. H. Mamdouh, M. A. El-Naggar, A. Fathalla and M. A. Nisreen, Novel UV-protective formulations for cotton, PET fabrics and their blend utilizing irradiation technique, Eur. Polym. J., 2009, 45, 2926-2934.
140. B. Das, UV radiation protective clothing, Open Text. J., 2010, 3, 14-21.
141. P. Kullavanijaya and H. W. Lim, Photoprotection, J. Am. Acad. Dermatol., 2005, 52, 937-958.
142. C. Kan and L. S. Yam, Effect of stretching on ultraviolet protection of cotton and cotton/coolmaxblended weft knitted fabric in a wet state, Materials, 2014, 7, 58-74.
143. C. A. Wilson, N. K. Bevin, R. M. Laing and B. E. Niven, Solar protection - effect of selected fabric and use characteristics on ultraviolet transmission, Text. Res. J., 2008, 78, 95-104.
144. D. Grifoni, L. Bacci, G. Zipoli, L. Albanese and F. Sabatini, The role of natural dyes in the UV protection of fabrics made of vegetable fibres, Dyes Pigm., 2011, 91, 279-285.
145. 2 nanoparticles, Carbohydr. Polym., 2010, 79, 526-532.
146. B. A. Çakir, L. Budama, Ö. Topel and N. Hoda, Synthesis of ZnO nanoparticles using PS-b-PAA reverse micelle cores for UV protective, self-cleaning and antibacterial textile applications, Colloids Surf., A, 2012, 414, 132-139.
147. Z. Zhou, Y. Zhao and Z. Cai, Low-temperature growth of ZnO nanorods on PET fabrics with two-step hydrothermal method, Appl. Surf. Sci., 2010, 256, 4724-4728.
148. M. M. Abd El-Hady, A. Farouk and S. Sharaf, Flame retardancy and UV protection of cotton based fabrics using nano-ZnO and polycarboxylic acids, Carbohydr. Polym., 2013, 92, 400-406.
149. 2 colloid and its performance in reactive dyeing of cotton fabrics, Carbohydr. Polym., 2012, 88, 992-1001.
150. x nanoparticles, Fibers Polym., 2012, 13, 489-494.
151. 3 multilayer film deposition on cotton fabrics by layer-by-layer deposition method, Mater. Res. Bull., 2011, 46, 1202-1206.
152. M. Gouda and S. M. Keshk, Evaluation of multifunctional properties of cotton fabric based on metal/chitosan film, Carbohydr. Polym., 2010, 80.
153. C. Tuchinda, S. Srivannaboon and H. W. Lim, Photoprotection by window glass, automobile glass, and sunglasses, J. Am. Acad. Dermatol., 2006, 54, 845-854.
154. J. T. Kim and M. S. Todorovic, Tuning control of buildings glazing' s transmittance dependence on the solar radiation wavelength to optimize daylighting and building's energy efficiency, Energy Build., 2013, 63, 108-118.