New renewable and biodegradable particleboards from Jatropha press cakes

Journal of Renewable Materials

Volumn 2, Issue 1, 2014, Pages 52-65

  Evon, Philippe ^a   Kartika, Ika A ^b   Rigal, Luc ^a  

^a UNIVERSITÉ DE TOULOUSE   (France)

^b BOGOR AGRICULTURAL UNIVERSITY   (Indonesia)

Author keywords

Jatropha press cake; Lignocellulosic fibers; Particleboard; Proteins; Thermo pressing

Indexed keywords

BENDING STRENGTH; FURNITURE MANUFACTURE; GLASS TRANSITION; IMPACT STRENGTH; MOLDING; PARTICLE BOARD; PROTEINS;

BUILDING TRADES; FLEXURAL PROPERTIES; JATROPHA PRESS CAKES; LIGNOCELLULOSIC FIBERS; MOLDING TEMPERATURE; OIL CONTENTS; PRESSING CONDITIONS; REINFORCING FILLERS;

PRESSES (MACHINE TOOLS);

EID: 84916932280     PISSN: 21646325     EISSN: 21646341     Source Type: Journal    
DOI: 10.7569/JRM.2013.634131     Document Type: Conference Paper

References (54)

1. G.M. Gubiz, M. Mittelbach, and M. Trabi, Exploitation of the tropical oil seed plant Jatropha curcas L. Bioresour. Technol. 67, 73-82 (1999).
2. K. Openshaw, A review of Jatropha curcas: An oil plant of unfulfilled promise. Biomass Bioenergy 19, 1-15 (2000).
3. W.M.J. Achten, L. Verchot, Y.J. Franken, E. Mathijs, V.P. Singh, R. Aerts, and B. Muys, Jatropha bio-diesel production and use. Biomass Bioenergy 32, 1063-1084 (2008).
4. A. Kumar and S. Sharma, An evaluation of multipurpose oil seed crop for industrial uses (Jatropha curcas L.): A review. Ind. Crops Prod. 28, 1-10 (2008).
5. I. Amalia Kartika, M. Yani, D. Ariono, P. Evon, and L. Rigal, Biodiesel production from jatropha seeds: Solvent extraction and in situ transesterification in a single step. Fuel 106, 111-117 (2013).
6. W. Haas and M. Mittelbach, Detoxification experiments with the seed oil from Jatropha curcas L. Ind. Crops Prod. 12, 111-118 (2000).
7. S. Isobe, F. Zuber, K. Uemura, and A. Noguchi, A new twin-screw press design for oil extraction of dehulled sunflower seeds. J. Am. Oil Chem. Soc. 69, 884-889 (1992).
8. T.W. Crowe, L.A. Johnson, and T. Wang, Characterization of extruded-expelled soybean flours. J. Am. Oil Chem. Soc. 78, 775-779 (2001).
9. T. Wang and L.A. Johnson, Refining normal and genetically enhanced soybean oils obtained by various extraction methods. J. Am. Oil Chem. Soc. 78, 809-815 (2001).
10. K.K. Singh, D.P. Wiesenborn, K. Tostenson, and N. Kangas, Influence of moisture content and cooking on screw pressing of crambe seed. J. Am. Oil Chem. Soc. 79, 165-170 (2002).
11. Y. Zheng, D.P. Wiesenborn, K. Tostenson, and N. Kangas, Screw pressing of whole and dehulled flaxseed for organic oil. J. Am. Oil Chem. Soc. 80, 1039-1045 (2003).
12. J.D. Dziezak, Single and twin-screw extruders in food processing. Food Technol. 43 164-174 (1989).
13. J.M. Bouvier and P. Guyomard, Method and installation for continuous extraction of a liquid contained in a raw material, French Patent PCT/FR97/00696, assigned to Clextral (November 21, 1997).
14. P. Guyomard. Study of the use of a twin-screw extruder in pressing-extrusion of oleagineous seeds, Ph.D. thesis, Universite Technologique de Compiegne, France (1994).
15. C. Lacaze-Dufaure, J. Leyris, L. Rigal, and Z. Mouloungui, A twin-screw extruder for oil extraction: I. Direct expression of oleic sunflower seeds. J. Am. Oil Chem. Soc. 76, 1073-1079 (1999).
16. I. Amalia Kartika, P.Y. Pontalier, and L. Rigal, Oil extraction of oleic sunflower seeds by twin screw extruder: Influence of screw configuration and operating conditions. Ind. Crops Prod. 22, 207-222 (2005).
17. I. Amalia Kartika, P.Y. Pontalier, and L. Rigal, Extraction of sunflower oil by twin screw extruder: Screw configuration and operating condition effects. Bioresour. Technol. 97, 2302-2310 (2006).
18. P. Evon, V. Vandenbossche, P.Y. Pontalier, and L. Rigal, Direct extraction of oil from sunflower seeds by twinscrew extruder according to an aqueous extraction process: Feasibility study and influence of operating conditions. Ind. Crops Prod. 26, 351-359 (2007).
19. P. Evon, V. Vandenbossche, P.Y. Pontalier, and L. Rigal, Aqueous extraction of residual oil from sunflower press cake using a twin-screw extruder: Feasibility study. Ind. Crops Prod. 29, 455-465 (2009).
20. M. Faye. Nouveau procédé de fractionnement de la graine de Neem (Azadirachta indica A. Jussi) sénégalais: Production d'un bio-pesticide, d'huile et de tourteau, Ph.D. thesis, INP, Toulouse, France (2010).
21. J. Sriti, K. Msaada, T. Talou, M. Faye, I. Amalia Kartika, and B. Marzouk, Extraction of coriander oil by twinscrew extruder: Screw configuration and operating conditions effect. Ind. Crops Prod. 40, 355-360 (2012).
22. P. Evon, I. Amalia Kartika, M. Cerny, and L. Rigal, Extraction of oil from jatropha seeds using a twin-screw extruder: Feasibility study. Ind. Crops Prod. 47, 33-42 (2013).
23. S. Karaj and J. Muller, Optimizing mechanical oil extraction of Jatropha curcas L. seeds with respect to press capacity, oil recovery and energy efficiency. Ind. Crops Prod. 34, 1010-1016 (2011).
24. S. Yorgun, S. ensoz, and O.M. Kockar, Flash pyrolysis of sunflower oil cake for production of liquid fuels. J. Anal. Appl. Pyrolysis 60, 1-12 (2001).
25. H.F. Gercel, The production and evaluation of biooils from the pyrolysis of sunflower-oil cake. Biomass Bioenergy 23, 307-314 (2002).
26. W. Diebel, M.M. Reddy, M. Misra, and A. Mohanty, Material property characterization of co-products from biofuel industries: Potential uses in value-added biocomposites. Biomass Bioenergy 37, 88-96 (2012).
27. J. Leyris, F. Silvestre, L. Rigal, and A. Gaset, Procede de fabrication d'objets a partir de matiere premiere vegetale par formage ou thermoformage, European Patent EP 0987089, assigned to Toulousaine de Recherche et Developpement (March 22, 2000).
28. A. Rouilly, O. Orliac, F. Silvestre, and L. Rigal, DSC study on the thermal properties of sunflower proteins according to their water content. Polymer 42, 10111-10117 (2001).
29. O. Orliac, A. Rouilly, F. Silvestre, and L. Rigal, Effects of additives on the mechanical properties, hydrophobicity and water uptake of thermo-moulded films produced from sunflower protein isolate. Polymer 43, 5417-5425 (2002).
30. O. Orliac, A. Rouilly, F. Silvestre, and L. Rigal, Effects of various plasticizers on the mechanical properties, water resistance and aging of thermo-moulded films made from sunflower proteins. Ind. Crops Prod. 18, 91-100 (2003).
31. A. Rouilly, O. Orliac, F. Silvestre, and L. Rigal, Thermal denaturation of sunflower globulins in low moisture conditions. Thermochim. Acta 398, 195-201 (2003).
32. A. Rouilly, O. Orliac, F. Silvestre, and L. Rigal, New natural injection-moldable composite material from sunflower oil cake. Bioresour. Technol. 97, 553-561 (2006).
33. A. Rouilly, A. Meriaux, C. Geneau Sbartai, F. Silvestre, and L. Rigal, Film extrusion of sunflower protein isolate. Polym. Eng. Sci. 46, 1635-1640 (2006).
34. P. Evon, V. Vandenbossche, P.Y. Pontalier, and L. Rigal, Thermo-mechanical behaviour of the raffinate resulting from the aqueous extraction of sunflower whole plant in twin-screw extruder: Manufacturing of biodegradable agromaterials by thermo-pressing. Adv. Mater. Res. 112, 63-72 (2010).
35. P. Evon, V. Vandenbossche, P.Y. Pontalier, and L. Rigal, The twin-screw extrusion technology, an original and powerful solution for the biorefinery of sunflower whole plant. Ol. Corps Gras Li. 17, 404-417. (2010).
36. J. Humbert, U. Makoumbou, L. Rigal, R. Chelle, A. Rouilly, and C. Geneau Sbartai, Materiau plastique composite sous la forme de granulats issus de matieres proteiques vegetales et son procede de fabrication, French Patent FR 2940297, assigned to AB7 Industries (June 25, 2010).
37. P. Evon, V. Vandenbossche, and L. Rigal, Manufacturing of renewable and biodegradable fiberboards from cake generated during biorefinery of sunflower whole plant in twin-screw extruder: Influence of thermopressing conditions. Polym. Degrad. Stab. 97, 1940-1947 (2012).
38. P. Evon, V. Vandenbossche, P.Y. Pontalier, and L. Rigal, Thermo-pressing of cake meal from sunflower whole plant, one only operation for two actions: Expression of residual oil and molding of biodegradable agromaterials, Proceedings of the 18th International Sunflower Conference, Mar del Plata, Argentina, pp. 937-942 (2012).
39. P. Evon, V. Vandenbossche, P.Y. Pontalier, and L. Rigal, New thermal insulation fiberboards from cake generated during biorefinery of sunflower whole plant in a twin-screw extruder. Ind. Crops Prod. 52, 354-362 (2014).
40. P.J. Van Soest and R.H. Wine, Use of detergents in the analysis of fibrious feeds. IV. Determination of plant cell wall constituents. J. AOAC Int. 50, 50-55 (1967).
41. P.J. Van Soest and R.H. Wine, Determination of lignin and cellulose in acid detergent fiber with permanganate. J. AOAC Int. 51, 780-785 (1968).
42. E.L. Schaffer, Effect of pyrolytic temperatures on the longitudinal strength of dry Douglas-fir. J. Test Eval. 1, 319-329 (1973).
43. O. Beaumont. Pyrolyse extractive du bois, Ph.D. thesis, Ecole Nationale Superieure des Mines de Paris, Paris, France (1981).
44. A. Lalou. Mise au point d'un procédé d'extraction des hémicelluloses à partir d'un substrat végétal ligno-cellulosique: Application au cas des coques de tournesol, Ph.D. thesis, INP, Toulouse, France (1995).
45. T. Hatakeyama and H. Hatakeyama. Thermal Properties of Green Polymers and Biocomposites, Kluwer Academic Publishers, Dordrecht. (2004).
46. C. Geneau. Manufacturing process of agromaterial natural composite by twin-screw extrusion and injection moulding from sunflower cake, Ph.D. thesis, INP, Toulouse, France (2006).
47. C. Manolas, A. Gaset, J.P. Jamet, A. Qiabi, L. Rigal, and G. Vilarem, Production process of soft, solid, biodegradable films and products obtained, European Patent EP 0612789, assigned to SAIS (September 2, 1994).
48. L. Rigal, R. Ioualalen, and A. Gaset, Method for obtaining a starch-free bran extract, a refined product and material resulting from this method, French Patent FR 2758332, assigned to Ardeval Champagne Ardenne (July 17, 1998).
49. I. Gabrielii, P. Gatenholm, W.G. Glasser, R.K. Jain, and L. Kenne, Separation, characterization and hydrogelformation of hemicellulose from aspen wood. Carbohydr. Polym. 43, 367-374 (2000).
50. A. Rouilly and L. Rigal, Agro-materials: A bibliographic review. J. Macromol. Sci. Polym. Rev. 42, 441-479 (2002).
51. M. Pouplin, A. Redl, and N. Gontard, Glass transition of wheat gluten plasticized with water, glycerol or sorbitol. J. Agric. Food Chem. 47, 538-543 (1999).
52. J.K. Lim, N. Hayashi, H. Matsuo, I. Hayakawa, and Y. Fujio, Plasticization of wheat starch-gluten mixture under an elevated temperature. J. Fac. Agr. Kyushu Univ. 37, 307-313 (1993).
53. L. Di Gioia, Effect of hydrophilic plasticizers on thermomechanical properties of corn gluten meal. Cereal Chem. 75, 514-519 (1998).
54. A. Morales and J.L. Kokini, Glass transition of soy globulins using differential scanning calorimetry and mechanical spectroscopy. Biotechnol. Prog. 13, 624-629 (1997).