Extraction of oil from jatropha seeds using a twin-screw extruder: Feasibility study

Industrial Crops and Products

Volumn 47, Issue , 2013, Pages 33-42

  Evon, Ph ^a   Amalia Kartika, I ^b   Cerny, M ^a   Rigal, L ^a  

^a UNIVERSITÉ DE TOULOUSE   (France)

^b BOGOR AGRICULTURAL UNIVERSITY   (Indonesia)

Author keywords

Jatropha; Oil extraction; Oil quality; Twin screw extruder

Indexed keywords

BIODIESEL PRODUCTION; JATROPHA; MECHANICAL EXTRACTION; OIL EXTRACTION; OIL QUALITY; SCREW CONFIGURATIONS; SPECIFIC MECHANICAL ENERGY; TWIN SCREW EXTRUDERS;

PLASTIC DEFORMATION; PRESSES (MACHINE TOOLS); SCREWS;

EXTRACTION;

BIOFUEL; EXPERIMENTAL STUDY; FLOW PATTERN; QUALITATIVE ANALYSIS; TEMPERATURE EFFECT;

EID: 84875235634     PISSN: 09266690     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.indcrop.2013.02.034     Document Type: Article

References (49)

1. Achten W.M.J., Verchot L., Franken Y.J., Mathijs E., Singh V.P., Aerts R., Muys B. Jatropha bio-diesel production and use. Biomass Bioenergy 2008, 32:1063-1084.
2. Akintayo E.T. Characteristics and composition of Parkia biglobbossa and Jatropha curcas oils and cakes. Bioresour. Technol. 2004, 92:307-310.
3. Amalia Kartika I., Pontalier P.Y., Rigal L. Oil extraction of oleic sunflower seeds by twin screw extruder: influence of screw configuration and operating conditions. Ind. Crops Prod. 2005, 22:207-222.
4. Amalia Kartika I., Pontalier P.Y., Rigal L. Extraction of sunflower oil by twin screw extruder: screw configuration and operating condition effects. Bioresour. Technol. 2006, 97:2302-2310.
5. AOAC Official Methods of Analysis of AOAC International 2006, Association of Official Analytical Chemists, Washington, DC. 18th ed.
6. Becker K., Makkar H.P.S. Jatropha curcas: a biodiesel source for tomorrow's oil and biodiesel. Lipid Technol. 2008, 20:104-107.
7. Bouvier J.M., Guyomard P. Method and installation for continuous extraction of a liquid contained in a raw material. PCT/FR97/00696 1997.
8. Canakci M., Gerpen J.V. Biodiesel from oils and fats with high free fatty acids. Trans. Am. Soc. Agric. Eng. 2001, 44:1429-1436.
9. Choudhury G.S., Gogoi B.K., Oswalt A.J. Twin screw extrusion of pink salmon muscle and rice flour blends: effects of kneading elements. J. Aquat. Food Prod. Technol. 1998, 7:69-91.
10. Crowe T.W., Johnson L.A., Wang T. Characterization of extruded-expelled soybean flours. J. Am. Oil Chem. Soc. 2001, 78:775-779.
11. Diebel W., Reddy M.M., Misra M., Mohanty A. Material property characterization of co-products from biofuel industries: potential uses in value-added biocomposites. Biomass Bioenergy 2012, 37:88-96.
12. Dziezak J.D. Single and twin-screw extruders in food processing. Food Technol. 1989, 164-174.
13. Evon Ph., Vandenbossche V., Pontalier P.Y., Rigal L. Direct extraction of oil from sunflower seeds by twin-screw extruder according to an aqueous extraction process: feasibility study and influence of operating conditions. Ind. Crops Prod. 2007, 26:351-359.
14. Evon Ph., Vandenbossche V., Pontalier P.Y., Rigal L. Aqueous extraction of residual oil from sunflower press cake using a twin-screw extruder: feasibility study. Ind. Crops Prod. 2009, 29:455-465.
15. Evon Ph., Vandenbossche V., Pontalier P.Y., Rigal L. Thermo-mechanical behaviour of the raffinate resulting from the aqueous extraction of sunflower whole plant in twin-screw extruder: manufacturing of biodegradable agromaterials by thermo-pressing. Adv. Mater. Res. 2010, 112:63-72.
16. Evon Ph., Vandenbossche V., Pontalier P.Y., Rigal L. The twin-screw extrusion technology, an original and powerful solution for the biorefinery of sunflower whole plant. Ol. Corps Gras Li. 2010, 17:404-417.
17. Evon Ph., Vandenbossche V., Rigal L. Manufacturing of renewable and biodegradable fiberboards from cake generated during biorefinery of sunflower whole plant in twin-screw extruder: influence of thermo-pressing conditions. Polym. Degrad. Stab. 2012, 97:1940-1947.
18. Faye, M., 2010. Nouveau procédé de fractionnement de la graine de Neem (Azadirachta indica A. Jussi) sénégalais: production d'un bio-pesticide, d'huile et de tourteau. PhD Thesis. INP, Toulouse, France.
19. Foidl N., Foidl G.G., Sanchez M., Mittelbach M., Hackel S. Jatropha curcas L. as a source for the production of biofuel in Nicaragua. Bioresour. Technol. 1996, 58:77-82.
20. Gautam A., Choudhury G.S. Screw configuration effect on residence time distribution and mixing in twin-screw extruder during extrusion of rice flour. J. Food Process Eng. 1999, 22:263-285.
21. Gautam A., Choudhury G.S. Screw configuration effect on starch breakdown during twin screw extrusion of rice flour. J. Food Process. Preserv. 1999, 23:355-375.
22. Gerçel H.F. The production and evaluation of bio-oils from the pyrolysis of sunflower-oil cake. Biomass Bioenergy 2002, 23:307-314.
23. Gogoi B.K., Choudhury G.S., Oswalt A.J. Effects of location and spacing of reversed screw and kneading element combination during twin-screw extrusion of starchy and proteinaceous blends. Food Res. Int. 1996, 29:505-512.
24. Goodrum J.W. Volatility and boiling points of biodiesel from vegetable oils and tallow. Biomass Bioenergy 2002, 22:205-211.
25. Gubiz G.M., Mittelbach M., Trabi M. Exploitation of the tropical oil seed plant Jatropha curcas L. Bioresour. Technol. 1999, 67:73-82.
26. Gueguen J., Viroben G., Noireaux P., Subirade M. Influence of plasticizer and treatment on the properties of film from pea proteins. Ind. Crops Prod. 1998, 7:149-157.
27. Guyomard, P., 1994. Study of the use of a twin-screw extruder in pressing-extrusion of oleagineous seeds. PhD Thesis. Université Technologique de Compiègne, France.
28. Haas W., Mittelbach M. Detoxification experiments with the seed oil from Jatropha curcas L. Ind. Crops Prod. 2000, 12:111-118.
29. Isobe S., Zuber F., Uemura K., Noguchi A. A new twin-screw press design for oil extraction of dehulled sunflower seeds. J. Am. Oil Chem. Soc. 1992, 69:884-889.
30. Karaj S., Müller J. Optimizing mechanical oil extraction of Jatropha curcas L. seeds with respect to press capacity, oil recovery and energy efficiency. Ind. Crops Prod. 2011, 34:1010-1016.
31. Knothe G. Structure indices in FA chemistry. How relevant is the iodine value?. J. Am. Oil Chem. Soc. 2002, 9:847-853.
32. Kumar A., Sharma S. An evaluation of multipurpose oil seed crop for industrial uses (Jatropha curcas L.): a review. Ind. Crops Prod. 2008, 28:1-10.
33. Kyriakidis N.B., Katsiloulis T. Calculation of iodine value from measurements of fatty acid methyl esters of some oils: comparison with the relevant American Oil Chemists' Society method. J. Am. Oil Chem. Soc. 2000, 77:1235-1238.
34. Lacaze-Dufaure C., Leyris J., Rigal L., Mouloungui Z. A twin-screw extruder for oil extraction: I. Direct expression of oleic sunflower seeds. J. Am. Oil Chem. Soc. 1999, 76:1073-1079.
35. Liu K.T., Gao S., Chung T.W., Huang C.M., Lin Y.S. Effect of process conditions on the removal of phospholipids from Jatropha curcas oil during the degumming process. Chem. Eng. Res. Des. 2012, 90:1381-1386.
36. Meher L.C., Naik S.N., Naik M.K., Dalai A.K. Biodiesel production using Karanja (Pongamia pinnata) and Jatropha (Jatropha curcas) seed oil. Handbook of Plant-based Biofuels 2009, 257. CRC Press, New York. A. Pandey (Ed.).
37. Naresh B., Srikanth Reddy M., Vijayalakshmi P., Reddy V., Devi P. Physico-chemical screening of accessions of Jatropha curcas for biodiesel production. Biomass Bioenergy 2012, 40:155-161.
38. Ofori-Boateng C., Teong L.K., JitKang L. Comparative exergy analyses of Jatropha curcas oil extraction methods: solvent and mechanical extraction processes. Energy Convers. Manage. 2012, 55:164-171.
39. Openshaw K. A review of Jatropha curcas: an oil plant of unfulfilled promise. Biomass Bioenergy 2000, 19:1-15.
40. Pradhan R.C., Mishra S., Naik S.N., Bhatnagar N., Vijay V.K. Oil expression from Jatropha seeds using a screw press expeller. Biosyst. Eng. 2011, 109:158-166.
41. Qian J., Wang F., Liu S., Yun Z. In situ alkaline transesterification of cottonseed oil for production of biodiesel and nontoxic cottonseed meal. Bioresour. Technol. 2008, 99:9009-9012.
42. Rigal L. Twin-screw Extrusion Technology and Fractionation of Vegetable Matter 1996, ENSC, Toulouse, France.
43. Rouilly A., Orliac O., Silvestre F., Rigal L. New natural injection-moldable composite material from sunflower oil cake. Bioresour. Technol. 2006, 97:553-561.
44. Singh K.K., Wiesenborn D.P., Tostenson K., Kangas N. Influence of moisture content and cooking on screw pressing of crambe seed. J. Am. Oil Chem. Soc. 2002, 79:165-170.
45. Sriti J., Msaada K., Talou T., Faye M., Amalia Kartika I., Marzouk B. Extraction of coriander oil by twin-screw extruder: screw configuration and operating conditions effect. Ind. Crops Prod. 2012, 40:355-360.
46. Tambunan A.H., Situmorang J.P., Silip J.J., Joelianingsih A., Araki T. Yield and physicochemical properties of mechanically extracted crude Jatropha curcas L. oil. Biomass Bioenergy 2012, 43:12-17.
47. Wang T., Johnson L.A. Refining normal and genetically enhanced soybean oils obtained by various extraction methods. J. Am. Oil Chem. Soc. 2001, 78:809-815.
48. Yorgun S., Sensöz S., Koçkar Ö.M. Flash pyrolysis of sunflower oil cake for production of liquid fuels. J. Anal. Appl. Pyrolysis 2001, 60:1-12.
49. Zheng Y., Wiesenborn D.P., Tostenson K., Kangas N. Screw pressing of whole and dehulled flaxseed for organic oil. J. Am. Oil Chem. Soc. 2003, 80:1039-1045.