New thermal insulation fiberboards from cake generated during biorefinery of sunflower whole plant in a twin-screw extruder

Industrial Crops and Products

Volumn 52, Issue , 2014, Pages 354-362

  Evon, Philippe ^a   Vandenbossche, Virginie ^a   Pontalier, Pierre Yves ^a   Rigal, Luc ^a  

^a UNIVERSITÉ DE TOULOUSE   (France)

Author keywords

Lignocellulosic fibers; Proteins; Sunflower whole plant; Thermal insulation fiberboards; Thermo pressing; Twin screw extruder

Indexed keywords

BENDING STRENGTH; DENSITY (SPECIFIC GRAVITY); ELASTIC MODULI; FIBERS; HEATING; HYDRAULIC MACHINERY; IMPACT STRENGTH; MOLDING; MOLDS; PROTEINS; REFINING; SCREWS; SUNFLOWER OIL; THERMAL INSULATION;

HEAT INSULATION PROPERTY; LIGNOCELLULOSIC FIBERS; LOW THERMAL CONDUCTIVITY; NATURAL COMPOSITES; REINFORCING FILLERS; THERMO-PRESSING; TWIN SCREW EXTRUDERS; WHOLE PLANTS;

THERMAL CONDUCTIVITY;

BULK DENSITY; ELASTIC MODULUS; IMPACT; INSULATION; OIL; PLANT; PROTEIN; SURFACE; THERMAL CONDUCTIVITY;

BEND STRENGTH; EXTRUDERS; FIBER BOARDS; LIGNOCELLULOSE; PLANTS; PROTEINS; SCREWS; THERMAL CONDUCTIVITY; THERMAL INSULATION;

FRANCE;

HELIANTHUS; HELIANTHUS ANNUUS;

EID: 84888815677     PISSN: 09266690     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.indcrop.2013.10.049     Document Type: Article

References (39)

1. Alavez-Ramirez R., Chiñas-Castillo F., Morales-Dominguez V.J., Ortiz-Guzman M. Thermal conductivity of coconut fibre filled ferrocement sandwich panels. Constr. Build. Mater. 2012, 37:425-431.
2. Ardente F., Beccali M., Cellura M., Mistretta M. Building energy performance: a LCA case study of kenaf-fibres insulation board. Energy Build. 2008, 40(1):1-10.
3. Benfratello S., Capitano C., Peri G., Rizzo G., Scaccianoce G., Sorrentino G. Thermal and structural properties of a hemp-lime biocomposite. Constr. Build. Mater. 2013, 48:745-754.
4. Chikhi M., Agoudjil B., Boudenne A., Gherabli A. Experimental investigation of new biocomposite with low cost for thermal insulation. Energy Build. 2013, 66:267-273.
5. Evon P., Vandenbossche V., Pontalier P.Y., Rigal L. Direct extraction of oil from sunflower seeds by twin-screw extruder according to an aqueous extraction process: feasibility study and influence of operating conditions. Ind. Crops Prod. 2007, 26(3):351-359.
6. Evon P., Vandenbossche V., Pontalier P.Y., Rigal L. Aqueous extraction of residual oil from sunflower press cake using a twin-screw extruder: feasibility study. Ind. Crops Prod. 2009, 29(2-3):455-465.
7. Evon P., Vandenbossche V., Pontalier P.Y., Rigal L. The twin-screw extrusion technology, an original and powerful solution for the biorefinery of sunflower whole plant. Ol. Corps gras Li. 2010, 17(6):404-417.
8. Evon P., Vandenbossche V., Pontalier P.Y., Rigal L. Thermo-mechanical behaviour of the raffinate resulting from the aqueous extraction of sunflower whole plant in twin-screw extruder: manufacturing of biodegradable agromaterials by thermopressing. Adv. Mater. Res. 2010, 112:63-72.
9. Evon P., Vandenbossche V., Rigal L. Thermo-pressing of cake meal from sunflower whole plant, one only operation for two actions: expression of residual oil and molding of biodegradable agromaterials. Proceedings of the 18th International Sunflower Conference 2012, 937-942.
10. Evon P., Vandenbossche V., Rigal L. Manufacturing of renewable and biodegradable fiberboards from cake generated during biorefinery of sunflower whole plant in twin-screw extruder: influence of thermo-pressing conditions. Polym. Degrad. Stabil. 2012, 97(10):1940-1947.
11. Galvin J.B. Toxicity data for commercial hexane and hexane isomers. Technology and Solvents for Extracting Oilseeds and Nonpetroleum Oils 1997, 75-85. AOCS Press, Urbana.
12. Geneau C. Manufacturing Process of Agromaterial Natural Composite by Twin-screw Extrusion and Injection Moulding from Sunflower Cake 2006, PhD Thesis, INP, Toulouse, France.
13. Hagenmaier R.D. Aqueous processing of full-fat sunflower seeds: yields of oil and protein. J. Am. Oil Chem. Soc. 1974, 51(10):470-471.
14. Isobe S., Zuber F., Uemura K., Noguchi A. A new twin-screw press design for oil extraction of dehulled sunflower seed. J. Am. Oil Chem. Soc. 1992, 69(9):884-889.
15. Khedari J., Charoenvai S., Hirunlabh J. New insulating particleboards from durian peel and coconut coir. Build. Environ. 2003, 38(3):435-441.
16. Khedari J., Nankongnab N., Hirunlabh J., Teekasap S. New low-cost insulation particleboards from mixture of durian peel and coconut coir. Build. Environ. 2004, 39(1):59-65.
17. Korjenic A., Petránek V., Zach J., Hroudová J. Development and performance evaluation of natural thermal-insulation materials composed of renewable resources. Energy Build. 2011, 43(9):2518-2523.
18. Kymäläinen H.R., Sjöberg A.M. Flax and hemp fibres as raw materials for thermal insulations. Build. Environ. 2008, 43(7):1261-1269.
19. Lertsutthiwong P., Khunthon S., Siralertmukul K., Noomun K., Chandrkrachang S. New insulating particleboards prepared from mixture of solid wastes from tissue paper manufacturing and corn peel. Bioresour. Technol. 2008, 99(11):4841-4845.
20. Maréchal V., Rigal L. Characterization of by-products of sunflower culture: commercial applications for stalks and heads. Ind. Crops Prod. 1999, 10(3):185-200.
21. Nicolajsen A. Thermal transmittance of a cellulose loose-fill insulation material. Build. Environ. 2005, 40(7):907-914.
22. Orliac O., Rouilly A., Silvestre F., Rigal L. Effects of additives on the mechanical properties, hydrophobicity and water uptake of thermo-moulded films produced from sunflower protein isolate. Polymer 2002, 43(20):5417-5425.
23. Orliac O., Rouilly A., Silvestre F., Rigal L. Effects of various plasticizers on the mechanical properties, water resistance and aging of thermo-moulded films made from sunflower proteins. Ind. Crops Prod. 2003, 18(2):91-100.
24. Paiva A., Pereira S., Sá A., Cruz D., Varum H., Pinto J. A contribution to the thermal insulation performance characterization of corn cob particleboards. Energy Build. 2012, 45:274-279.
25. Panyakaew S., Fotios S. New thermal insulation boards made from coconut husk and bagasse. Energy Build. 2011, 43(7):1732-1739.
26. Pinto J., Paiva A., Varum H., Costa A., Cruz D., Pereira S., Fernandes L., Tavares P., Agarwal J. Corn's cob as a potential ecological thermal insulation material. Energy Build. 2011, 43(8):1985-1990.
27. Rosenthal A., Pyle D.L., Niranjan K. Aqueous and enzymatic processes for edible oil extraction. Enzyme Microb. Technol. 1996, 19(6):402-420.
28. Rouilly A., Orliac O., Silvestre F., Rigal L. DSC study on the thermal properties of sunflower proteins according to their water content. Polymer 2001, 42(26):10111-10117.
29. Rouilly A., Orliac O., Silvestre F., Rigal L. Thermal denaturation of sunflower globulins in low moisture conditions. Thermochim. Acta 2003, 398(1-2):195-201.
30. Rouilly A., Orliac O., Silvestre F., Rigal L. New natural injection-moldable composite material from sunflower oil cake. Bioresour. Technol. 2006, 97(4):553-561.
31. Rouilly A., Mériaux A., Geneau-Sbartaï C., Silvestre F., Rigal L. Film extrusion of sunflower protein isolate. Polym. Eng. Sci. 2006, 46(11):1635-1640.
32. Saiah R., Perrin B., Rigal L. Improvement of thermal properties of fired clays by introduction of vegetable matter. J. Build. Phys. 2010, 34(2):124-142.
33. Sampathrajan A., Vijayaraghavan N.C., Swaminathan K.R. Mechanical and thermal properties of particle boards made from farm residues. Bioresour. Technol. 1992, 40(3):249-251.
34. Southwell K.H., Harris R.V. Extraction of oil from oilseeds using the hot water flotation method. Trop. Sci. 1992, 32(3):251-262.
35. Vandenbossche V., Rigal L., Saiah R., Perrin B. New agro-materials with thermal insulation properties. Proceedings of the 18th International Sunflower Conference 2012, 949-954.
36. Van Soest P.J., Wine R.H. Use of detergents in the analysis of fibrous feeds. IV. Determination of plant cell wall constituents. J. AOAC Int. 1967, 50:50-55.
37. Van Soest P.J., Wine R.H. Determination of lignin and cellulose in acid detergent fiber with permanganate. J. AOAC Int. 1968, 51:780-784.
38. Zhang J., Mungara P., Jane J. Mechanical and thermal properties of extruded soy protein sheets. Polymer 2001, 42(6):2569-2578.
39. Zhou X.Y., Zheng F., Li H.G., Lu C.L. An environment-friendly thermal insulation material from cotton stalk fibers. Energy Build. 2010, 42(7):1070-1074.