Using nanomechanics to optimize coatings for cutting tools

Nanostructured Thin Films and Coatings: Mechanical Properties

Volumn , Issue , 2010, Pages 205-244

  Beake, B D ^a   Goodes, S R ^a   Smith, J F ^a   Fox Rabinovich, G S ^b   Veldhuis, S C ^b  

^a MICRO MATERIALS LTD   (United Kingdom)

^b MCMASTER UNIVERSITY   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84906314717     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/b11764     Document Type: Chapter

References (109)

1. K. Yamamoto, T. Sato, K. Takahara, and K. Hanaguri, Surf. Coat. Technol., 174-175 (2003) 620.
2. J. Vetter, T. Krug, V. von der Heide, and I. Wirth, Surf. Coat. Technol., 174-175 (2003) 615.
3. B.C. Schramm, H. Scheerer, H. Hoche, E. Broszeit, E. Abele, and C. Berger, Surf. Coat. Technol., 188-189 (2004) 623.
4. G.S. Fox-Rabinovich, G.C. Weatherly, A.I. Dodonov, A.I. Kovalev, L.S. Shuster, S.C. Veldhuis, G.K. Dosbaeva, D.L. Wainstein, and M.S. Migranov, Surf. Coat. Technol., 177-178 (2004) 800.
5. A. Hörling, L. Hultman, M. Odén, J. Sjölén, and L. Karlsson, Surf. Coat. Technol., 384-392 (2005) 191.
6. M.H. Staia, M. D’Alessandria, D.T. Quinto, F. Roudet, and M. Marsal Astort, J. Phys.: Condens. Matter, 18 (2006) S1727-S1736.
7. G.S. Fox-Rabinovich, B.D. Beake, J.L. Endrino, S.C. Veldhuis, R. Parkinson, L.S. Shuster, and M.S. Migranov, Surf. Coat. Technol., 200 (2006) 5738-5742.
8. G.S. Fox-Rabinovich, J.L. Endrino, B.D. Beake, A.I. Kovalev, S.C. Veldhuis, L. Ning, F. Foitane, and A. Gray, Surf. Coat. Technol., 201 (2006) 3524.
9. B.D. Beake, J.F. Smith, A. Gray, G.S. Fox-Rabinovich, S.C. Veldhuis, and J.L. Endrino, Surf. Coat. Technol., 201 (2007) 4585.
10. G.S. Fox-Rabinovich, J.L. Endrino, B.D. Beake, M.H. Augirre, S.C. Veldhuis, D.T. Quinto, C.E. Bauer, A.I. Kovalev, and A. Gray, Surf. Coat. Technol., 202 (2008) 2985.
11. B.D. Beake, G.S. Fox-Rabinovich, S.C. Veldhuis, and S.R. Goodes, Surf. Coat. Technol. 203 (2009) 1919.
12. Y.-T. Cheng and C.-M. Cheng, Mater. Sci. Eng. R, 44 (2004) 91.
13. G.S. Fox-Rabinovich, A.I. Kovalev, B.D. Beake, and M.M. Bruis, Tooling materials and some features of their self-organization: Adaptive tooling materials, in Self-Organization during Friction: Advanced Surface Engineered Materials and Systems Design, G.S. Fox-Rabinovich and G. Totten (eds.), Taylor & Francis Books/CRC Press LLC, Boca Raton, FL, 2006, p. 167.
14. P. Lemoine, J.P. Quinn, P. Maguire, and J.A. McLaughlin, Wear, 257 (2004) 509.
15. B.D. Beake and S.P. Lau, Diam. Relat. Mater., 14 (2005) 1535.
16. B.D. Beake, A.A. Ogwu, and T. Wagner, Mater. Sci. Eng. A, 423 (2006) 70.
17. T. Zaharia, J.L. Sullivan, S.O. Saied, R. Bosch, and M.D. Bijker, Proc. Inst. Mech. Eng., 221 (2007) 161.
18. B.D. Beake, V.M. Vishnyakov, R. Valizadeh, and J.S. Colligon, J. Phys. D: Appl. Phys., 39 (2006) 1392.
19. B. Shi, J.L. Sullivan, and B.D. Beake, J. Phys. D: Appl. Phys., 41 (2008) 045303.
20. B.D. Beake, S.R. Goodes, and J.F. Smith, Surf. Eng., 17 (2001) 187-191.
21. B.D. Beake, S.P. Lau, and J.F. Smith, Surf. Coat. Technol., 177-178 (2004) 611-615.
22. B.D. Beake and J.F. Smith, Surf. Coat. Technol., 188-189C (2004) 594.
23. B.D. Beake, Surf. Coat. Technol., 198 (2005) 90.
24. J.F. Smith and S. Zheng, Surf. Eng., 16 (2000) 143.
25. B.D. Beake and J.F. Smith, Philos. Mag. A, 82 (2002) 2179.
26. J. Xia, H. Dong, and T. Bell, Intermetallics, 10 (2002) 2179.
27. B.D. Beake, S.R. Goodes, and J.F. Smith, Z. Metallkd., 94 (2003) 798.
28. B.D. Beake, G.A. Bell, and D. Bielinski, J. Appl. Poly. Sci., 107 (2008) 577.
29. G. Constantinides, Z.I. Kalcioglu, M. McFarland, J.F. Smith, and K.J. Van Vliet, J. Biomech., 41 (2008) 3285.
30. W.C. Oliver and G.M. Pharr, J. Mater. Res., 7 (1992) 1564.
31. W.C. Oliver and G.M. Pharr, J. Mater. Res., 19 (2004) 1.
32. M.F. Doerner and W.D. Nix, J. Mater. Res., 1 (1986) 601.
33. S.I. Bulychev, V.P. Alekhin, M.Kh. Shoroshow, A.P. Ternovskij, and G.D. Shynrev, Zavod. Lab., 41 (1975) 1137.
34. ISO14577, Metallic materials-Instrumented indentation test for hardness and materials parameters, Parts 1-4.
35. J. Greenwood and J. Williamson, Proc. R. Soc. A, 295 (1966) 300.
36. Y.-T. Cheng and C.-M. Cheng, Appl. Phys. Lett., 73 (1998) 614.
37. Y. Choi, H.-S. Lee, and D. Kwon, J. Mater. Res., 19 (2004) 3307.
38. Yu.V. Milman, J. Phys. D Appl. Phys., 41 (2008) 074013.
39. L. Brabec, P. Bohac, M. Stranyanek, R. Ctvrtlik, and M. Kocirik, Micropor. Mesopor. Mater., 94 (2006) 226.
40. B.R. Lwan and V.R. Howes, J. Mater. Sci., 16 (1981) 2745.
41. W. Ni, Y.-T. Cheng, C.-M. Cheng, and D.S Grummon, J. Mater. Res., 19 (2004) 149.
42. Determination of the hardness and modulus of thin films and coatings (INDICOAT) EU project contract SMT4-CT98-2249, N.M. Jennett et al., NPL Report MATC(A), May 24, 2001, ISSN 1473-2734.
43. T. Chudoba and N.M. Jennett, J. Phys. D Appl. Phys., 41 (2008) 215407.
44. K.-D. Bouzakis, N. Michailidis, and A. Siganos, Proceedings of the Fifth International Conference “THE” Coatings in Manufacturing Engineering, Thessaloniki, Greece, 2005.
45. B.D. Beake and N. Ranganathan, Mater. Sci. Eng. A, 423 (2006) 46.
46. G.S. Fox-Rabinovich, A.I. Kovalev, J.L. Endrino, S.C. Veldhuis, L.S. Shuster, and I.S. Gershman, Surface-engineered tool materials for high-performance machining, in Self-Organization during Friction:Advanced Surface Engineered Materials and Systems Design, G.S. Fox-Rabinovich and G. Totten (eds.), Taylor & Francis Books/CRC Press LLC, Boca Raton, FL, 2007, pp. 231-296.
47. A.C. Fischer-Cripps, P. Karvankova, and S. Veprek, Surf. Coat. Technol., 200 (2006) 5645.
48. A. Leyland and A. Matthews, Wear, 246 (2000) 1.
49. J.F. Palacio, S.J. Bull, J. Neidhardt, and L. Hultman, Thin Solid Films, 494 (2006) 63.
50. A. Leyland and A. Matthews, Surf. Coat. Technol., 177-178 (2004) 317.
51. T. Bell, H. Dong, and Y. Sun, Tribol. Int., 31 (1998) 127.
52. Z.X. Zhang, H. Dong, T. Bell, and B.S. Xu, J. Alloys Compd., 464 (2008) 519.
53. Z.X. Zhang, H. Dong, and T. Bell, Surf. Coat. Technol., 200 (2006) 5237.
54. B.D. Beake, G.A. Bell, S.R. Goodes, N.J. Pickford, and J.F. Smith, Surf. Eng. (2010), in press.
55. J.C.A. Batista, C. Godoy, G. Pintaude, A. Sinatora, and A. Matthews, Surf. Coat. Technol., 174-175 (2003) 891.
56. B.D. Beake, G.S. Fox-Rabinovich, and S.C. Veldhuis, in preparation.
57. A.I. Kovalev, D.L. Wainstein, G.S. Fox-Rabinovich, K. Yamamoto, and S.C. Veldhuis, Surf. Interface Anal., 38 (2006) 879.
58. X. Zeng, C. Liang, Y.C. Liu, and L.-S. Tan, SIMTech Technical Report PT/99/003/ST.
59. G.S. Fox-Rabinovich, S.C. Veldhuis, V.N. Scvorstov, L.S. Shuster, and G.K. Dosbaeva, Thin Solid Films, 469-470 (2004) 505-512.
60. K. Sato, N. Ichmiya, A. Kondo, and Y. Tanaka, Surf. Coat. Technol., 163-164 (2003) 135.
61. X.Z. Ding, X.T. Zeng, Y.C. Liu, F.Z. Fang, and G.C. Lim, SIMTech technical reports 7 (2006) 10.
62. X.T. Xeng, S. Zhang, and L.S. Tan, J. Vac. Sci. Technol. A, 19 (2001) 1919.
63. K.-D. Bouzakis, S. Hadjiyiannis, G. Skordaris, J. Anastopoulos, I. Mirisidis, N. Michailidis, K. Efstathiou, O. Knotek, G. Erkens, R. Cremer, S. Rambadt, and I. Wirth, Surf. Coat. Technol., 174-175 (2003) 393.
64. K.-D. Bouzakis, S. Hadjiyiannis, G. Skordaris, I. Mirisidis, N. Michailidis, K. Efstathiou, E. Pavlidou, G. Erkens, R. Cremer, S. Rambadt, and I. Wirth, Surf. Coat. Technol., 177-178 (2004) 657.
65. K.-D. Bouzakis, J. Anastopoulos, A. Asimakopoulos, N. Michailidis, and G. Erkens, Surf. Coat. Technol., 201 (2006) 4395; S. Yang, E. Wiemann, and D.G. Teer, Surf. Coat. Technol., 188-189 (2004) 662.
66. S.Y. Yoon, S.-Y. Yoon, W.-S. Chung, and K.H. Kim, Surf. Coat. Technol., 177-178 (2004) 645.
67. O. Knotek, B. Bosserhoff, A. Schrey, T. Leyendecker, O. Lemmer, and S. Esser, Surf. Coat. Technol., 54-55 (1992) 102.
68. M.Z. Huq, C. Butaye, and J.-P. Celis, J. Mater. Res., 15 (2000) 1591.
69. M.Z. Huq, J.P. Celis, J. Meneve, L. Stals, and D. Schryvers, Surf. Coat. Technol., 113 (1999) 242.
70. European patent 1095254.
71. B.D. Beake, M.J. Ibanez, and J.F. Smith, Thin Solid Films, 398 (2001) 437.
72. B.R. Lawn, A.G. Evans, and D.B. Marshall, J. Am. Ceram. Soc., 63 (1980) 574.
73. S. Zhang, D. Sun, Y. Fu, and H. Du, Surf. Coat. Technol., 198 (2005) 2.
74. S. Zhang, H.L. Wang, S.-E. Ong, D. Sun, and X.-L. Bui, Plasma Process. Polym., 4 (2007) 219.
75. N.M. Jennett and J. Nunn, submitted.
76. P.D. Warren, J. Eur. Ceram. Soc., 15 (1995) 385.
77. B.D. Beake, Surf. Coat. Technol., 198 (2005) 90-93.
78. B.D. Beake, S.R. Goodes, J.F. Smith, R. Madani, C.A. Rego, R.I. Cherry, and T. Wagner, Diam. Relat. Mater., 11 (2002) 1606.
79. D. Camino, A.H.S. Jones, D. Mercs, and D.G. Teer, Vacuum, 52 (1999) 125.
80. P.J. Kelly and R.D. Arnell, Vacuum, 56 (2000) 159.
81. X.T. Zeng, S. Zhang, and J. Hsieh, Surf. Coat. Tech., 102 (1998) 108.
82. X.T. Zeng, S. Zhang, and L.S. Tan, J. Vac. Sci. Technol. A, 19 (2001) 1919.
83. X.T. Zeng, S. Zhang, X.Z. Ding, and D.G. Teer, Thin Solid Films, 420-421 (2002) 366.
84. X.T. Zeng, S. Zhang, C.Q. Sun, and Y.C. Liu, Thin Solid Films, 424 (2003) 99.
85. S. Zhang, X.L. Bui, and Y. Fu, Surf. Coat. Tech., 167 (2003) 137.
86. B.R. Lawn, J. Mater. Res., 19 (2004) 22.
87. G.S. Fox-Rabinovich, L.S. Shuster, B.D. Beake, and S.C. Veldhuis, Physical and mechanical properties to characterize tribological compatibility of heavy loaded tribo-systems (HLTS), in Self-Organization during Friction: Advanced Surface Engineered Materials and Systems Design, G.S. Fox-Rabinovich and G. Totten (eds.), Taylor & Francis Books/CRC Press LLC, Boca Raton, FL, 2006, p. 121.
88. N. Ranganathan and B.D. Beake, unpublished.
89. Y.C. Liu, J.W.R. Teo, S.K. Tung, and K.H. Lam, J. Alloys Compd., 448 (2008) 340.
90. J.R. Nicholls, S.A. Impey, R.G. Wellman, A.G. Dyer, and J.F. Smith, ICMCTF, San Diego, CA, 2003.
91. J. Xia, H. Dong, and T. Bell, Intermetallics, 10 (2002) 2179.
92. J. Xia, C.X. Li, and H. Dong, Mater. Sci. Eng. A, 354 (2003) 112.
93. A.J. Muir Wood, J.-H. You, and T.W. Clyne, Proc. SPIE, 5648 (2004) 216.
94. A.J. Muir Wood, V. Gergely, and T.W. Clyne, Proc. SPIE, 5387 (2004) 268.
95. T.G. Nieh, C. Iwamoto, Y. Ikuhara, K.W. Lee, and Y.W. Chung, Intermetallics, 12 (2004) 1183.
96. J. Zhang, Y.-T. Cheng, and D.S. Grummon, J. Appl. Phys., 98 (2005) 22505.
97. F. Guiliani, A. Goruppa, S.J. Lloyd, D. Teer, and W.J. Clegg, Proc. Mat. Res. Soc. Symp., 841 (2005) R4.9.
98. A.J. Muir Wood and T.W. Clyne, Acta Mater., 54 (2006) 5607.
99. A. Gray and B.D. Beake, J. NanoSci. Nanotech., 7 (2007) 2530.
100. V. Domnich, Y. Aratyn, W.M. Kriven, and Y. Gogotsi, Rev. Adv. Mater. Sci., 17 (2008) 33.
101. G.S. Fox-Rabinovich, S.C. Veldhuis, G.K. Dosbaeva, K. Yamamoto, A.I. Kovalev, D.L. Wainstein, I.S. Gershman, L.S. Shuster, and B.D. Beake, J. Appl. Phys., 103 (2008) 083510.
102. A. Sawant and S. Tin, Scr. Mater., 58 (2008) 275.
103. T.F. Juliano, M.F. VanLandingham, C.A. Tweedie, and K.J. Van Vliet, Exp. Mech., 47 (2007) 99.
104. L.J. Vandeperre, F. Giuliani, S.J. Lloyd, and W.J. Clegg, Acta Mater., 55 (2007) 6307.
105. V. Bhakhri and R.J. Klassen, J. Mater. Sci., 41 (2006) 2249.
106. V. Bhakhri and R.J. Klassen, J. Mater. Sci., 41 (2006) 2259.
107. A. Richter, C.-L. Chen, R. Smith, E. McGee, R.C. Thompson, and S.D. Kenny, Mater. Sci. Eng. A, 494 (2008) 367.
108. L. Chen, Y. Du, P.H. Mayrhofer, S.Q. Wang, and J. Li, Surf. Coat. Technol., 202 (2008) 5158.
109. A.N. Panckow, D. Sladkov, P.K. Singh, and C. Genzel, Surf. Coat. Technol., 188-189 (2004) 214-219.