Friction and wear

Tribology for Scientists and Engineers: From Basics to Advanced Concepts

Volumn 9781461419457, Issue , 2013, Pages 43-91

  Menezes, Pradeep L ^a   Nosonovsky, Michael ^a   Kailas, Satish V ^b   Lovell, Michael R ^a  

^a University of Wisconsin Milwaukee   (United States)

^b INDIAN INSTITUTE OF SCIENCE   (India)

Author keywords

[No Author keywords available]

Indexed keywords

TRIBOLOGY; WEAR OF MATERIALS;

FRICTION AND WEAR; GROSS NATIONAL PRODUCT; MECHANICAL; PRACTICAL IMPORTANCE;

FRICTION;

EID: 84905085217     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-1-4614-1945-7_2     Document Type: Chapter

References (115)

1. Menezes PL, Kishore, Kailas SV, Lovell MR (2011) Response of materials during sliding on various surface textures. J Mater Eng Perform 20(8):1438-1446
2. Menezes PL, Kishore, Kailas SV (2008) Role of surface texture and roughness parameters in friction and transfer layer formation under dry and lubricated sliding conditions. Int J Mater Res 99(7):795-807
3. Nosonovsky M, Bhushan B (2008) Multiscale dissipative mechanisms and hierarchical surfaces: friction, superhydrophobicity, and biomimetics. Springer, Heidelberg
4. Adams GG, Barber JR, Ciavarella M, Rice JR (2005) A paradox in sliding contact with friction. ASME J Appl Mech 72:450-452
5. Adams GG (1995) Self-excited oscillations of two elastic half-spaces sliding with a constant coefficient of friction. ASME J Appl Mech 62:867-872
6. Nosonovsky M, Adams GG (2004) Vibration and stability of frictional sliding of two elastic bodies with a wavy contact interface. ASME J Appl Mech 71:154-161
7. Adams GG, Nosonovsky M (2000) Contact modeling-forces. Tribol Int 33:441-442
8. Nosonovsky M, Adams GG (2001) Dilatational and shear waves induced by the frictional sliding of two elastic half-spaces. Int J Eng Sci 39:1257-1269
9. Tolstoi DM (1967) Significance of the normal degree of freedom and natural normal vibrations in contact friction. Wear 10:199-213
10. Persson BNJ (2000) Sliding friction: physical principles and applications. Springer, Berlin
11. Rice JR, Lapusta N, Ranjith K (2001) Rate and state dependent friction and the stability of sliding between elastically deformable solids. J Mech Phys Solids 49:1865-1898
12. NosonovskyM(2007) Modeling size, load, and velocity effect on friction at micro/nanoscale. Int J Surf Sci Eng 1:22-37
13. Barber JR (1969) Thermoelastic instabilities in the sliding of conforming solids. Proc R Soc Lond A 312:381-394
14. Fox-Rabinovich GS, Totten GE (eds) (2006) Self-organization during friction. CRC, Boca Raton, FL
15. Nosonovsky M, Bhushan B (2009) Thermodynamics of surface degradation, selforganization, and self-healing for biomimetic surfaces. Philos Trans R Soc A 367:1607-1627
16. Menezes PL, Kishore, Kailas SV (2009) Studies on friction and formation of transfer layer when Al-4Mg alloy pins slid at various numbers of cycles on steel plates of different surface texture. Wear 267(1-4):525-534
17. Menezes PL, Kishore, Kailas SV, Lovell MR (2010) "Studies on friction and transfer layer formation when pure Mg pins slid at various numbers of cycles on steel plates of different surface texture." ASME/STLE international joint tribology conference (IJTC2010) San Francisco, USA, pp 263-265
18. Menezes PL, Kishore, Kailas SV, Lovell MR (2011) The role of surface texture on friction and transfer layer formation during repeated sliding of Al-4Mg against steel. Wear 271(9-10):1785-1793
19. Menezes PL, Kishore, Kailas SV, Lovell MR (2012) "Self-organization and friction during sliding." ASME/STLE international joint tribology conference (IJTC2012), Denver, USA
20. Menezes PL, Kishore, Kailas SV, Lovell MR (2013) Tribological response of soft materials sliding against hard surface textures at various numbers of cycles. Lubrication Sci 25 (2):79-99
21. Mortazavi V, Menezes PL, Nosonovsky M (2011) Studies of Shannon entropy evolution due to self-organization during the running-in. ASME/STLE international joint tribology conference (IJTC2011), Los Angeles, USA, pp 303-305
22. Menezes PL, Kishore, Kailas SV, Lovell MR (2010) Studies on friction and transfer layer formation when high purity Al pins slid at various numbers of cycles on steel plates of different surface texture. Proceedings of the 2010 STLE annual meeting & exhibition, Las Vegas, USA
23. Menezes PL, Kishore, Kailas SV, Lovell MR (2010) Role of surface texture on friction and transfer layer formation when pure Al pins slid at various numbers of cycles on steel plates. 2011 STLE annual meeting & exhibition, Atlanta, USA
24. Bhushan B, NosonovskyM(2003) Scale effects in friction using strain gradient plasticity and dislocation-assisted sliding (microslip). Acta Mater 51:4331-4345
25. Carpinteri A, Paggi M (2005) Size-scale effect on the friction coefficient. Int J Solid Struct 42:2901-2910
26. Niederberger S, Gracias DH, Komvopoulos K, Somorjai GA (2000) Transition from nanoscale to microscale dynamic friction mechanisms on polyethylene and silicon surfaces. J Appl Phys 87:3143-3150
27. Zhang LC, Johnson KL, Cheong WCD (2001) A molecular dynamics study of scale effects on the friction of single-asperity contacts. Tribol Lett 10:23-28
28. Wenning L, Müser MH (2001) Friction laws for elastic nanoscale contacts. Europhys Lett 54:693-699
29. Nosonovsky M (2009) From wear to self-healing in nanostructured biological and technical surfaces. Proceedings of ASME/STLE international joint tribology conference IJTC2009, Memphis, USA, ASME
30. Bowden FP, Tabor D (1950) The friction and lubrication of solids, Part-I. Clarendon, UK
31. Rice J (1991) Dislocation nucleation from a crack tip: an analysis based on the peierls concept. J Mech Phys Solids 40:239-271
32. Gerde E, Marder M (2001) Friction and fracture. Nature 413:285-288
33. Kessler DA (2001) Surface physics: a new crack on friction. Nature 413:260-261
34. Chang WR, Etzion I, Bogy DB (1987) An elastic-plastic model for the contact of rough surfaces. ASME J Tribol 109:257-263
35. Kogut L, Etsion I (2004) A static friction model for elastic-plastic contacting rough surfaces. ASME J Tribol 126:34-40
36. He G, Müser MH, Robbins MO (1999) Adsorbed layers and the origin of static friction. Science 284:1650-1652
37. Greenwood JA, Williamson JBP (1966) Contact of nominally flat surfaces. Proc R Soc Lond A 295:300-319
38. Archard JF (1957) Elastic deformation and the laws of friction. Proc R Soc Lond A 243:190-205
39. Suh NP (1986) Tribophysics. Prentice-Hall, Inc, Englewood Cliffs, NJ
40. Rabinowicz E (1995) Friction and wear of materials. Wiley, USA
41. Kudo H (1965) A note on the role of microscopically trapped lubricant at the tool-work interface. Int J Mech Sci 7(5):383-388
42. Staph HE, Ku PM, Carper HJ (1973) Effect of surface roughness and surface texture on scuffing. Mech Mach Theor 8:197-208
43. Koura MM (1980) The effect of surface texture on friction mechanisms. Wear 63(1):1-12
44. Lakshmipathy R, Sagar R (1992) Effect of die surface topography on die-work interfacial friction in open die forging. Int J Mach Tool Manuf 32(5):685-693
45. Saha PK, Wilson WRD, Timsit RS (1996) Influence of surface topography on the frictional characteristics of 3104 aluminum alloy sheet. Wear 197(1-2):123-129
46. Hu ZM, Dean TA (2000) A study of surface topography, friction and lubricants in metal forming. Int J Mach Tool Manuf 40(11):1637-1649
47. Rasp W, Wichern CM (2002) Effects of surface-topography directionality and lubrication condition on frictional behaviour during plastic deformation. J Mater Process Technol 125-126:379-386
48. Menezes PL, Kishore, Kailas SV (2006) Studies on friction and transfer layer: role of surface texture. Tribol Lett 24(3):265-273
49. Menezes PL, Kishore, Kailas SV, Lovell MR (2009) Studies on friction and formation of transfer layer in HCP metals. ASME J Tribol 131(3):031604.1-031614.9
50. Menezes PL, Kishore, Kailas SV, Bobji MS (2010) Influence of tilt angle of plate on friction and transfer layer-A study of aluminium pin sliding against steel plate. Tribol Int 43(5-6):897-905
51. Menezes PL, Kishore, Kailas SV, Lovell MR (2012) Analysis of strain rates and microstructural evaluation during metal forming: role of surface texture and friction. Tribol Trans 55(5):582-589
52. Kumar PC, Menezes PL, Kailas SV (2008) Role of surface texture on friction under boundary lubricated conditions. Tribol Online 3(1):12-18
53. Gadelmawla ES, Koura MM, Maksoud TMA, Elewa IM, Soliman HH (2002) Roughness parameters. J Mater Process Technol 123(1):133-145
54. Menezes PL, Kishore, Kailas SV (2006) Influence of surface texture on coefficient of friction and transfer layer formation during sliding of pure magnesium pin on 080 M40 (EN8) steel plate. Wear 261(5-6):578-591
55. Menezes PL, Kishore, Kailas SV (2008) Effect of surface roughness parameters and surface texture on friction and transfer layer formation in tin-steel tribo-system. J Mater Process Technol 208(1-3):372-382
56. Menezes PL, Kishore, Kailas SV (2006) Effect of roughness parameter and grinding angle on coefficient of friction when sliding of Al-Mg alloy over EN8 steel. ASME J Tribol 128(4):697-704
57. Menezes PL, Kishore, Kailas SV (2008) Influence of roughness parameters on coefficient of friction under lubricated conditions. Sadhana 33(3):181-190
58. Menezes PL, Kishore, Kailas SV (2009) Influence of surface texture and roughness parameters on friction and transfer layer formation during sliding of aluminium pin on steel plate. Wear 267(9-10):1534-1549
59. Menezes PL, Kishore, Kailas SV, Lovell MR (2011) Influence of inclination angle and machining direction on friction and transfer layer formation. ASME J Tribol 133(1):014501.1-014501.8
60. Menezes PL, Kishore, Kailas SV, Lovell MR (2011) Friction and transfer layer formation in polymer-steel tribo-system: Role of surface texture and roughness parameters. Wear 271(9-10):2213-2221
61. Pottirayil A, Menezes PL, Kailas SV (2010) A parameter characterizing plowing nature of surfaces close to Gaussian. Tribol Int 43(1-2):370-380
62. Pottirayil A, Menezes PL, Kailas SV (2008) Correlating the features of topography to friction by sliding experiments. Proceedings of the 9th biennial ASME conference on engineering systems design and analysis (ESDA 2008), Israel, pp 361-364
63. Menezes PL, Kishore, Kailas SV (2006) Studies on friction and transfer layer using inclined scratch. Tribol Int 39(2):175-183
64. Menezes PL, Kishore, Kailas SV (2008) On the effect of surface texture on friction and transfer layer formation-A study using Al and steel pair. Wear 265(11-12):1655-1669
65. Menezes PL, Kishore, Kailas SV (2009) Influence of inclination angle of plate on friction, stick-slip and transfer layer-A study of magnesium pin sliding against steel plate. Wear 267(1-4):476-484
66. Menezes PL, Kishore, Kailas SV (2006) Effect of directionality of unidirectional grinding marks on friction and transfer layer formation of Mg on steel using inclined scratch test. Mater Sci Eng A 429(1-2):149-160
67. Menezes PL, Kishore, Shimjith M, Kailas SV (2007) Influence of surface texture on friction and transfer layer formation in Mg-8Al alloy/steel tribo-system. Indian J Tribol 2(1):46-54
68. Menezes PL, Kishore, Kailas SV (2008) Influence of roughness parameters of harder surface on coefficient of friction and transfer layer formation. Int J Surf Sci Eng 2(1-2):98-119
69. Menezes PL, Kishore, Kailas SV (2009) Influence of roughness parameters and surface texture on friction during sliding of pure lead over 080 M40 steel. Int J Adv Manuf Technol 43(7):731-743
70. Menezes PL, Kishore, Kailas SV (2009) Study of friction and transfer layer formation in copper-steel tribo-system. Tribol Trans 52(5):611-622
71. Menezes PL, Kishore, Kailas SV, Lovell MR (2011) Role of surface texture, roughness and hardness on friction during unidirectional sliding. Tribol Lett 41(1):1-15
72. Buckley DH, Johnson RL (1968) The influence of crystal structure and some properties on hexagonal metals on friction and adhesion. Wear 11(6):405-419
73. Menezes PL, Kishore, Kailas SV, Lovell MR (2012) 'Tribological response of materials with varying hardness and crystal structure during sliding on various surface textures. Materials and Surface Engineering: Research and Development, Woodhead, pp 207-242
74. Menezes PL, Kishore, Kailas SV, Lovell MR (2010) Response of materials as a function of grinding angle on friction and transfer layer formation. Int J Adv Manuf Technol 49(5):485-495
75. Menezes PL, Kishore, Kailas SV, Lovell M R (2011) Factors influencing stick-slip motion: Effect of hardness, crystal structure and surface texture. ASME/STLE international joint tribology conference (IJTC2011), Los Angeles, USA, 2011, pp 71-73
76. Menezes PL, Kishore, Kailas SV, Lovell MR (2012) Tribological response of materials with varying hardness and crystal structure during sliding on various surface textures. Materials and Surface Engineering: Research and Development, Woodhead, pp 207-242
77. Menezes PL, Kishore, Kailas SV (2008) Subsurface deformation and the role of surface texture-A study with Cu pins and steel plates. Sadhana 33(3):191-201
78. Menezes PL, Kishore, Kailas SV (2009) Role of surface texture of harder surface on subsurface deformation. Wear 266(1-2):103-109
79. Moore MA, King FS (1980) Abrasive wear of brittle solids. Wear 60(1):123-140
80. Menezes PL, Kishore, Kailas SV (2008) Effect of surface topography on friction and transfer layer during sliding. Tribol Online 3(1):25-30
81. Menezes PL, Kishore, Kailas SV, Lovell MR (2013) The role of strain rate response on tribological behavior of metals. ASME J Tribol 135(1):011601.1-011601.7
82. Miyoshi K (1990) Fundamental considerations in adhesion, friction and wear for ceramicmetal contacts. Wear 141(1):35-44
83. Farhat ZN, Ding Y, Northwood DO, Alpas AT (1996) Effect of grain size on friction and wear of nanocrystalline aluminum. Mater Sci Eng A 206(2):302-313
84. Bregliozzi G, Schino AD, Kenny JM, Haefke H (2003) The influence of atmospheric humidity and grain size on the friction and wear of AISI 304 austenitic stainless steel. Mater Lett 57(29):4505-4508
85. Wang ZB, Taao NR, Li S, Wang W, Liu G, Lu J, Lu K (2003) Effect of surface nanocrystallization on friction and wear properties in low carbon steel. Mater Sci Eng A 352(1-2):144-149
86. Mishra R, Basu B, Balasubramaniam R (2004) Effect of grain size on the tribological behavior of nanocrystalline nickel. Mater Sci Eng A 373(1-2):370-373
87. Whitehead JR (1950) Surface deformation and friction of metals at light loads. Proc R Soc Lond A 201:109-124
88. Bowden FP, Young JE (1951) Friction of clean metals and the influence of adsorbed films. Proc R Soc Lond A 208:311-325
89. Tsuya Y (1975) Microstructure of wear, friction and solid lubrication. Tech. Rep. of Mech. Eng. Lab. 3(81), Japan
90. Menezes PL, Kishore, Kailas SV, Lovell MR (2011) Studies on friction in steel-aluminum alloy tribo-system: role of surface texture of the softer material. 2011 STLE annual meeting & exhibition, Atlanta, USA
91. Menezes PL, Kishore, Kailas SV, Lovell MR (2009) Influence of alloying element addition on friction and transfer layer formation in Al-Mg system: role of surface texture. Proceedings of ASME/STLE international joint tribology conference IJTC2009, Memphis, USA, ASME, 2009, pp 459-461
92. Menezes PL, Kishore, Kailas SV, Lovell MR (2010) Response of metals and polymers during sliding: Role of surface texture. ASME/STLE international joint tribology conference (IJTC2010), San Francisco, USA, 2010, pp 267-269
93. Menezes PL, Kishore, Kailas SV, Lovell MR (2010) Role of surface texture on friction and transfer layer formation during sliding of PVC pin on steel plate. Proceedings of the 2010 STLE annual meeting & exhibition, Las Vegas, USA, 2010
94. Archard JF (1953) Contact and rubbing of flat surfaces. J Appl Phys 24(8):981-988
95. Suh NP (1973) The delamination theory of wear. Wear 25(1):111-124
96. Klamecki BE (1980) Wear-an entropy production model. Wear 58(2):325-330
97. Zmitrowicz A (1987) A thermodynamical model of contact, friction, and wear. Wear 114(2):135-221
98. Bryant MD (2009) Entropy and dissipative processes of friction and wear. FME Trans 37:55-60
99. Doelling KL, Ling FF, Bryant MD, Heilman BP (2000) An experimental study of the correlation between wear and entropy flow in machinery components. J Appl Phys 88 (5):2999-3003
100. Bryant MD, Khonsari MM, Ling FF (2008) On the thermodynamics of degradation. Proc R Soc Lond A 464(2096):2001-2014
101. Berkovich II, Gromakovsky DG (2000) Tribology: physical fundamentals, mechanical and technical applications. Samara, Russia
102. Bershadski LI (1993) B I Kostetski and the general concept in tribology. Trenie I Iznos 14:6-18
103. Lim SC, Ashby MF (1987) Overview no. 55 wear-mechanism maps. Acta Metal 35(1):1-24
104. Saka N, Eleiche AM, Suh NP (1977) Wear of metals at high sliding speeds. Wear 44(1):109-125
105. Khruschov MM (1974) Principles of abrasive wear. Wear 28(1):69-88
106. Hornbogen E (1975) The role of fracture toughness in the wear of metals. Wear 33(2):251-259
107. Buckley DH (1978) The use of analytical surface tools in the fundamental study of wear. Wear 46(1):19-53
108. Abdel-Aal HA (2000) On the influence of thermal properties on wear resistance of rubbing metals at elevated temperatures. ASME J Tribol 122(3):657-660
109. Rice SL, Nowotny H, Wayne SF (1989) A survey of the development of subsurface zones in the wear of materials. Key Eng Mater 33:77-100
110. Prasad YVRK, Sasidhara S (1997) Hot working guide: a compendium of processing maps. ASM International, Materials Park, OH
111. Kailas SV, Biswas SK (1997) Strain rate response and wear of metals. Tribol Int 30:369-375
112. Kailas SV, Biswas SK (1995) The role of strain rate response in plane strain abrasion of metals. Wear 181-183:648-657
113. Kailas SV (2003) A study of the strain rate microstructural response and wear of metals. J Mater Eng Perform 12(6):629-637
114. Kato K (2000) Wear in relation to friction-A review. Wear 241(2):151-157
115. Suh NP, Sridharan P (1975) Relationship between the coefficient of friction and the wear rate of metals. Wear 34(3):291-299