Study of friction and transfer layer formation in copper-steel tribo-system: Role of surface texture and roughness parameters

Tribology Transactions

Volumn 52, Issue 5, 2009, Pages 611-622

  Menezes, Pradeep L ^a   Kishore, ^a   Kailas, Satish V ^a  

^a INDIAN INSTITUTE OF SCIENCE   (India)

Author keywords

Copper; Friction; Pin on plate sliding tester; Roughness parameters; Surface texture; Transfer layer

Indexed keywords

COEFFICIENT OF FRICTIONS; PLANE STRAIN CONDITION; PLANE STRESS CONDITION; ROUGHNESS PARAMETERS; STEEL PLATES; SURFACE CHARACTERISTICS; SURFACE TEXTURES; TRANSFER LAYER FORMATION; TWO-COMPONENT;

COPPER; FRICTION; TEXTURES;

TRIBOLOGY;

EID: 77953833531     PISSN: 10402004     EISSN: 1547397X     Source Type: Journal    
DOI: 10.1080/10402000902825754     Document Type: Article

References (39)

1. Reid, J.V. and Schey, J.A. (1985), "Adhesion of Copper Alloys," Wear, 104,1, pp 1-20.
2. Kestursatya, M., Kim, J.K. and Rohatgi, P.K. (2001), "Friction and Wear Behavior of a Centrifugally Cast Lead-Free Copper Alloy Containing Graphite Particles," Metallurgical and Materials Transactions, A 32, 8, pp 2115-2141.
3. Lakshmipathy, R. and Sagar, R. (1992), "Effect of Die Surface Topography on Die-Work Interfacial Friction in Open Die Forging," Int. J. Mach. Tools Manuf., 32, 5, pp 685-693.
4. Malayappan, S. and Narayanasamy, R. (2004), "An Experimental Analysis of Upset Forging of Aluminum Cylindrical Billets Considering the Dissimilar Frictional Conditions at Flat Die Surfaces," Int. J. Adv. Manuf. Technol., 23, 9-10, pp 636-643.
5. Staph, H.E., Ku, P.M. and Carper, H.J. (1973), "Effect of Surface Roughness and Surface Texture on Scuffing," Mech. Mach. Theory, 8, pp 197-208.
6. Määttä, A., Vuoristo, P. and Mäntylä, T. (2001), "Friction and Adhesion of Stainless Steel Strip against Tool Steels in Unlubricated Sliding with High Contact Load," Tribol. Int., 34, 11, pp 779-786.
7. Hu, Z.M. and Dean, T.A. (2000), "A Study of Surface Topography, Friction and Lubricants in Metal Forming," Int. J. Mach. Tools Manuf., 40, 11, pp 1637-1649.
8. Xie, Y. and Williams, J.A. (1996), "The Prediction of Friction and Wear when a Soft Surface Slides against a Harder Rough Surface," Wear, 196, 1-2, pp 21-34.
9. Myers, N.O. (1962), "Characterization of Surface Roughness," Wear, 5, 3, pp 182-189.
10. Singh, R., Melkote, S.N. and Hashimoto, F. (2005), "Frictional Response of Precision Finished Surfaces in Pure Sliding," Wear, 258, 10, pp 1500-1509.
11. Hirst, W. and Hollander, A.E. (1974), "Surface Finish and Damage in Sliding," Proc. R. Soc. London, Ser., A 337, pp 379-394.
12. Bello, D.O. and Walton, S. (1987), "Surface Topography and Lubrication in Sheet-Metal Forming," Tribol. Int., 20, 2, pp 59-65.
13. Wang, L.Y., Yin, Z.F., Zhang, J., Chen, C. and Hsu, S. (2000), "Strength Measurement of Thin Lubricating Films," Wear, 237, 2, pp 155-162.
14. Liu, Z., Sun, J. and Shen, W. (2002), "Study of Plowing and Friction at the Surfaces of Plastic Deformed Metals," Tribol. Int., 35, 8, pp 511-522.
15. Menezes, P.L., Kishore and Kailas, S.V. (2006), "Effect of Roughness Parameter and Grinding Angle on Coefficient of Friction When Sliding of Al-Mg Alloy over EN8 Steel," ASME: Journal of Tribology, 128, 4, pp 697-704.
16. Menezes, P.L., Kishore and Kailas, S.V. (2006), "Effect of Directionality of Unidirectional Grinding Marks on Friction and Transfer Layer Formation of Mg on Steel Using Inclined Scratch Test," Materials Science and Engineering, A 429, 1-2, pp 149-160.
17. Gadelmawla, E.S., Koura, M.M., Maksoud, T.M.A., Elewa, I.M. and Soliman, H.H. (2002), "Roughness Parameters," J. Mater. Process. Technol. 123, 1 pp 133-145.
18. Zipin, R.B. (1990), "Analysis of the Rk Surface Roughness Parameter Proposals," Precision Engineering, 12, 2, pp 106-108.
19. Menezes, P.L., Kishore and Kailas, S.V. (2006), "Studies on Friction and Transfer Layer: Role of Surface Texture," Tribology Letters, 24, 3, pp 265-273.
20. Menezes, P.L., Kishore and Kailas, S.V. (2006), "Influence of Surface Texture on Coefficient of Friction and Transfer Layer Formation during Sliding of Pure Magnesium Pin on 080 M40 (EN8) Steel Plate," Wear, 261, 5-6, pp 578-591.
21. Feder, J. (1988), Fractals, Plenum Press, New York.
22. Hasegawa, M., Liu, J., Okuda, K. and Nunobiki, M. (1996), "Calculation of Fractal Dimension of Machined Surface Profiles," Wear, 192, 1-2, pp 40-45.
23. Bowden, F.P. and Tabor, D. (1954), The Friction and Lubrication of Solids, Clarendon, Oxford, UK.
24. Fischer, T.E., Bhattacharya, S. and Salher, R. (1988), "Lubrication by a Smectic Liquid Crystal," Tribology Transactions, 31, 4, pp 442-448.
25. Hamrock, B.J. and Dowson, D. (1977), "Isothermal Elastohydrodynamic Lubrication of Point Contacts Part III-Fully Flooded Results," Transactions of ASME - Journal of Lubrication Technology, 99, pp 264-276.
26. Stachowiak, G.W. and Batchelor, A.W. (2001), Engineering Tribology, Butterworth Heinemann, Boston.
27. Faulkner, A. and Arnell, R.D. (2000), "The Development of a Finite Element Model to Simulate the Sliding Interaction between Two, Three-Dimensional, Elastoplastic, Hemispherical Asperities," Wear, 242, 1-4, pp 114-122.
28. Kailas, S.V. and Menezes, P.L. (2003), "Coefficient of Friction and Material Transfer Studies of an Al-Mg Alloy Pin on EN8 Steel Flat Using Inclined Scratch," Proceedings of International Seminar on Metal Forming-Process Design and Optimization, Indian Institute of Science, India, pp 124-143.
29. Subhash, G. and Zhang, W. (2002), "Investigation of the Overall Friction Coefficient in Single-Pass Scratch Test," Wear, 252, 1-2, pp 123-134.
30. Wang, F.-X., Lacey, P., Gates, R.S. and Hsu, S.M. (1991), "A Study of the Relative Surface Conformity between Two Surfaces in Sliding Contact," Trans. ASME: J. Tribol., 113, pp 755-761.
31. Sahoo, P. and Chowdhury, S.K.R. (2002), "A Fractal Analysis of Adhesive Wear at the Contact between Rough Solids," Wear, 253, 9-10, pp 924-934.
32. Varadi, K., Neder, Z. and Friedrich, K. (1996), "Evaluation of the Real Contact Areas, Pressure Distributions and Contact Temperatures during Sliding Contact between Real Metal Surfaces," Wear, 200, 1-2, pp 55-62.
33. Yoshioka, N. (1997), "A Review of the Micromechanical Approach to the Physics of Contacting Surfaces," Tectonophysics, 277, pp 29-40.
34. Lanzon, J.M., Cardew-Hall, M.J. and Hodgson, P.D. (1998), "Characterising Frictional Behaviour in Sheet Metal Forming," J. Mater. Process. Technol., 80-81, pp 251-256.
35. Saha, P.K., Wilson, W.R.D. and Timsit, R.S. (1996), "Influence of Surface Topography on the Frictional Characteristics of 3104 Aluminum Alloy Sheet," Wear, 197, 1-2, pp 123-129.
36. Lovell, M.R., Deng, Z. and Khonsari, M.M. (2000), "Experimental Characterization of Sliding Friction: Crossing from Deformation to Plowing Contact," Trans. ASME: J. Tribol., 122, pp 856-863.
37. Schedin, E. (1994), "Galling Mechanisms in Sheet Forming Operations," Wear, 179, 1-2, pp 123-128.
38. Bello, D.O. and Walton, S. (1987), "Surface Topography and Lubrication in Sheet-Metal Forming," Tribol. Int., 20, 2, pp 59-65.
39. Lazzarotto, L., Dubar, L., Dubois, A., Ravassard, P., Bricout J.P. and Oudin, J.A. (1998), "Selection Methodology for Lubricating Oils in Cold Metal Forming Processes," Wear, 215, 1-2, pp 1-9.