Influence of surface texture and roughness parameters on friction and transfer layer formation during sliding of aluminium pin on steel plate

Wear

Volumn 267, Issue 9-10, 2009, Pages 1534-1549

  Menezes, Pradeep L ^a   Kishore, ^a   Kailas, Satish V ^a  

^a INDIAN INSTITUTE OF SCIENCE   (India)

Author keywords

Friction; Roughness parameters; Stick slip; Surface texture; Transfer layer

Indexed keywords

COEFFICIENT OF FRICTIONS; HARD SURFACE; MATING SURFACES; MOLECULAR DEFORMATIONS; ROUGHNESS PARAMETERS; SOFTER MATERIALS; STEEL PLATES; STICK SLIP MOTION; STICK-SLIP; STICK-SLIP PHENOMENA; SURFACE PARAMETER; SURFACE ROUGHNESS PARAMETERS; SURFACE TEXTURE; SURFACE TEXTURE EFFECTS; SURFACE TEXTURES; TRANSFER LAYER; TRANSFER LAYER FORMATION; TWO-COMPONENT;

ALUMINUM; FRICTION; SLIP FORMING; STEEL; SURFACE PROPERTIES; SURFACE ROUGHNESS; TRIBOLOGY;

TEXTURES;

EID: 68649122080     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2009.06.003     Document Type: Article

References (53)

1. Suh N.P. Tribophysics (1986), Prentice-hall, Inc., Englewood Cliffs, NJ
2. Menezes P.L., Kishore, and Kailas S.V. Effect of roughness parameter and grinding angle on coefficient of friction when sliding of Al-Mg alloy over EN8 steel. Trans. ASME: J. Tribol. 128 (2006) 697-704
3. Kailas S.V., and Menezes P.L. Coefficient of friction and material transfer studies of an Al-Mg alloy pin on EN8 steel flat using inclined scratch. Proceedings of International Seminar on Metal Forming-Process Design and Optimization (2003) 124-143
4. Czichos H., and Habig K.-H. Wear of medium carbon steel: a systematic study of the influences of materials and operating parameters. Wear 110 (1986) 389-400
5. Dwivedi D.K., Arjun T.S., Thakur P., Vaidya H., and Singh K. Sliding wear and friction behaviour of Al-18% Si-0.5% Mg alloy. J. Mater. Process. Technol. 152 (2004) 323-328
6. Buckley D.H. Friction characteristics in vacuum of single and polycrystalline aluminum oxide in contact with themselves and with various metals. ASLE Trans. 10 (1967) 134-145
7. Lim S.C., Ashby M.F., and Brunton J.H. The effects of sliding conditions on the dry friction of metals. Acta Metall. 37 (1989) 767-772
8. Bhansali K.J. Adhesive wear of nickel- and cobalt-base alloys. Wear 60 (1980) 95-110
9. Lanzon J.M., Cardew-Hall M.J., and Hodgson P.D. Characterising frictional behaviour in sheet metal forming. J. Mater. Process. Technol. 80-81 (1998) 251-256
10. Nogueira I., Dias A.M., Gras R., and Progri R. An experimental model for mixed friction during running-in. Wear 253 (2002) 541-549
11. Sankaran S., and Rabinowicz E. Effect of the rate of repeat traversal on adhesive wear. Wear 56 (1979) 227-238
12. Kayaba T. A study of the wear and friction of some bearing materials. Wear 5 (1962) 173-181
13. Mokhtar M.O.A., Zaki M., and Shawki G.S.A. Correlation between the frictional behaviour and the physical properties of metals. Wear 65 (1980) 29-34
14. Mokhtar M.O.A., Zaki M., and Shawki G.S.A. An experimental re-examination of kinetic friction. Tribol. Int. 12 (1979) 261-264
15. Mokhtar M.O.A., Zaki M., and Shawki G.S.A. Effect of mechanical properties on frictional behaviour of metals. Tribol. Int. 12 (1979) 265-268
16. Bello D.O., and Walton S. Surface topography and lubrication in sheet-metal forming. Tribol. Int. 20 (1987) 59-65
17. Saha P.K., Wilson W.R.D., and Timsit R.S. Influence of surface topography on the frictional characteristics of 3104 aluminum alloy sheet. Wear 197 (1996) 123-129
18. Rasp W., and Wichern C.M. Effects of surface-topography directionality and lubrication condition on frictional behaviour during plastic deformation. J. Mater. Process. Technol. 125-126 (2002) 379-386
19. Lakshmipathy R., and Sagar R. Effect of die surface topography on die-work interfacial friction in open die forging. Int. J. Mach. Tools Manuf. 32 (1992) 685-693
20. Malayappan S., and Narayanasamy R. An experimental analysis of upset forging of aluminium cylindrical billets considering the dissimilar frictional conditions at flat die surfaces. Int. J. Adv. Manuf. Technol. 23 (2004) 636-643
21. Xie Y., and Williams J.A. The prediction of friction and wear when a soft surface slides against a harder rough surface. Wear 196 (1996) 21-34
22. Määttä A., Vuoristo P., and Mäntylä T. Friction and adhesion of stainless steel strip against tool steels in unlubricated sliding with high contact load. Tribol. Int. 34 (2001) 779-786
23. Staph H.E., Ku P.M., and Carper H.J. Effect of surface roughness and surface texture on scuffing. Mech. Mach. Theor. 8 (1973) 197-208
24. Hu Z.M., and Dean T.A. A study of surface topography, friction and lubricants in metal forming. Int. J. Mach. Tools Manuf. 40 (2000) 1637-1649
25. Gadelmawla E.S., Koura M.M., Maksoud T.M.A., Elewa I.M., and Soliman H.H. Roughness parameters. J. Mater. Process. Technol. 123 (2002) 133-145
26. Lundberg J. Influence of surface roughness on normal-sliding lubrication. Tribol. Int. 28 (1995) 317-322
27. Myers N.O. Characterization of surface roughness. Wear 5 (1962) 182-189
28. Singh R., Melkote S.N., and Hashimoto F. Frictional response of precision finished surfaces in pure sliding. Wear 258 (2005) 1500-1509
29. Koura M.M. The effect of surface texture on friction mechanisms. Wear 63 (1980) 1-12
30. Wieleba W. The statistical correlation of the coefficient of friction and wear rate of PTFE composites with steel counterface roughness and hardness. Wear 252 (2002) 719-729
31. Hirst W., and Hollander A.E. Surface finish and damage in sliding. Proc. R. Soc. Lond. Ser. A 337 (1974) 379-394
32. Koura M.M., and Omar M.A. The effect of surface parameters on friction. Wear 73 (1981) 235-246
33. Feder J. Fractals (1988), Plenum Press, New York
34. Hasegawa M., Liu J., Okuda K., and Nunobiki M. Calculation of fractal dimension of machined surface profiles. Wear 192 (1996) 40-45
35. Bowden F.P., Tabor D., and The Friction. Lubrication of Solids (1954), Clarendon, Oxford
36. Fischer T.E., Bhattacharya S., and Salher R. Lubrication by a smectic liquid crystal. Tribol. Int. 31 (1988) 442-448
37. Hamrock B.J., and Dowson D. Ball Bearing Lubrication (1981), John Willey and Sons, New York, USA
38. Stachowiak G.W., and Batchelor A.W. Engineering Tribology (2001), Butterworth Heinemann, USA
39. Torrance A.A. Using profilometry for the quantitative assessment of tribological function: PC-based software for friction and wear prediction. Wear 181-183 (1995) 397-404
40. Bhushan B., and Nosonovsky M. Scale effects in dry and wet friction, wear, and interface temperature. Nanotechnology 15 (2004) 749-761
41. Black A.J., Kopalinsky E.M., and Oxley P.L.B. An investigation of the different regimes of deformation which can occur when a hard wedge slides over a soft surface: the influence of wedge angle, lubrication and prior plastic working of the surface. Wear 123 (1988) 97-114
42. Challen J.M., and Oxley P.L.B. An explanation of the different regimes of friction and wear using asperity deformation models. Wear 53 (1979) 229-243
43. Petryk H. Slip line field solutions for sliding contact. International Conference, Tribology-Friction, Lubrication and Wear Fifty Years On. II. Proceedings of the Institute of Mechanical Engineering (1987) 987-994
44. Ai X., and Cheng H.S. The effects of surface texture on EHL point contacts. Trans. ASME: J. Tribol. 118 (1996) 59-66
45. Tanaka K., Kato T., and Matsumoto Y. Molecular dynamics simulation of vibrational friction force due to molecular deformation in confined lubricant film. Trans. ASME: J. Tribol. 125 (2003) 587-591
46. Gee M.L., McGuiggan P.M., and Israelachvili J.N. Liquid to solid like transitions of molecularly thin films under shear. J. Chem. Phys. 93 (1990) 1895-1906
47. Demirel A.L., and Granick S. Transition from static to kinetic friction in a model lubricated system. J. Chem. Phys. 109 (1998) 6889-6897
48. Kopalinsky E.M., and Black A.J. Metallic sliding friction under boundary lubricated conditions: investigation of the influence of lubricant at the start of sliding. Wear 190 (1995) 197-203
49. Menezes P.L., Kishore, and Kailas S.V. Studies on friction and transfer layer: role of surface texture. Tribol. Lett. 24 (2006) 265-273
50. Wang F.-X., Lacey P., Gates R.S., and Hsu S.M. A study of the relative surface conformity between two surfaces in sliding contact. Trans. ASME: J. Tribol. 113 (1991) 755-761
51. Yoshioka N. A review of the micromechanical approach to the physics of contacting surfaces. Tectonophysics 277 (1997) 29-40
52. Sahoo P., and Chowdhury S.K.R. A fractal analysis of adhesive wear at the contact between rough solids. Wear 253 (2002) 924-934
53. Varadi K., Neder Z., and Friedrich K. Evaluation of the real contact areas, pressure distributions and contact temperatures during sliding contact between real metal surfaces. Wear 200 (1996) 55-62