On the effect of surface texture on friction and transfer layer formation-A study using Al and steel pair

Wear

Volumn 265, Issue 11-12, 2008, Pages 1655-1669

  Menezes, Pradeep L ^a   Kishore, ^a   Kailas, Satish V ^a  

^a INDIAN INSTITUTE OF SCIENCE   (India)

Author keywords

Friction; Grinding angle; Lubrication; Roughness parameter; Stick slip; Transfer layer

Indexed keywords

GRINDING (COMMINUTION); GRINDING (MACHINING); SLIP FORMING; STEEL; STRUCTURAL PANELS; SURFACE PROPERTIES; SURFACE ROUGHNESS; TEXTURES; TRIBOLOGY; WEAR OF MATERIALS;

AMBIENT ENVIRONMENTS; ANGLE EFFECTS; COEFFICIENT OF FRICTIONS; CONTACT SURFACES; FRICTIONAL BEHAVIORS; GRINDING; GRINDING ANGLE; GRINDING MARKS; MATING SURFACES; MOLECULAR DEFORMATIONS; NORMAL LOADS; OPTICAL PROFILOMETER; ROUGHNESS PARAMETER; SCANNING ELECTRON MICROGRAPHS; SLIDING; SLIDING VELOCITIES; SLIP MOTIONS; STEEL PLATES; STICK-SLIP; SURFACE FEATURES; SURFACE GRINDING; SURFACE ROUGHNESS PARAMETERS; SURFACE TEXTURES; TRANSFER LAYER; TRANSFER LAYER FORMATIONS; TRANSFER LAYERS;

FRICTION;

EID: 54149086104     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2008.04.003     Document Type: Article

References (54)

1. Suh N.P. Tribophysics (1986), Prentice-Hall, Inc., Englewood Cliffs, New Jersey
2. Buckley D.H. Friction characteristics in vacuum of single and polycrystalline aluminum oxide in contact with themselves and with various metals. ASLE Transactions 10 (1967) 134-145
3. Lanzon J.M., Cardew-Hall M.J., and Hodgson P.D. Characterising frictional behaviour in sheet metal forming. Journal of Materials Processing Technology 80-81 (1998) 251-256
4. Nogueira I., Dias A.M., Gras R., and Progri R. An experimental model for mixed friction during running-in. Wear 253 5-6 (2002) 541-549
5. Mokhtar M.O.A., Zaki M., and Shawki G.S.A. Correlation between the frictional behaviour and the physical properties of metals. Wear 65 1 (1980) 29-34
6. Mokhtar M.O.A., Zaki M., and Shawki G.S.A. An experimental re-examination of kinetic friction. Tribology International 12 6 (1979) 261-264
7. Mokhtar M.O.A., Zaki M., and Shawki G.S.A. Effect of mechanical properties on frictional behaviour of metals. Tribology International 12 6 (1979) 265-268
8. Kayaba T. A study of the wear and friction of some bearing materials. Wear 5 3 (1962) 173-181
9. Sankaran S., and Rabinowicz E. Effect of the rate of repeat traversal on adhesive wear. Wear 56 1 (1979) 227-238
10. Bhansali K.J. Adhesive wear of nickel- and cobalt-base alloys. Wear 60 1 (1980) 95-110
11. Lim S.C., Ashby M.F., and Brunton J.H. The effects of sliding conditions on the dry friction of metals. Acta Metallurgica 37 3 (1989) 767-772
12. Dwivedi D.K., Arjun T.S., Thakur P., Vaidya H., and Singh K. Sliding wear and friction behaviour of Al-18% Si-0.5% Mg alloy. Journal of Materials Processing Technology 152 3 (2004) 323-328
13. Czichos H., and Habig K.-H. Wear of medium carbon steel: a systematic study of the influences of materials and operating parameters. Wear 110 3-4 (1986) 389-400
14. Bello D.O., and Walton S. Surface topography and lubrication in sheet-metal forming. Tribology International 20 2 (1987) 59-65
15. Saha P.K., Wilson W.R.D., and Timsit R.S. Influence of surface topography on the frictional characteristics of 3104 aluminum alloy sheet. Wear 197 1-2 (1996) 123-129
16. Rasp W., and Wichern C.M. Effects of surface-topography directionality and lubrication condition on frictional behaviour during plastic deformation. Journal of Materials Processing Technology 125-126 (2002) 379-386
17. Lakshmipathy R., and Sagar R. Effect of die surface topography on die-work interfacial friction in open die forging. International Journal of Machine Tools and Manufacture 32 5 (1992) 685-693
18. Malayappan S., and Narayanasamy R. An experimental analysis of upset forging of aluminium cylindrical billets considering the dissimilar frictional conditions at flat die surfaces. International Journal of Advanced Manufacturing Technology 23 (2004) 636-643
19. Määttä A., Vuoristo P., and Mäntylä T. Friction and adhesion of stainless steel strip against tool steels in unlubricated sliding with high contact load. Tribology International 34 (2001) 779-786
20. Staph H.E., Ku P.M., and Carper H.J. Effect of surface roughness and surface texture on scuffing. Mechanism and Machine Theory 8 (1973) 197-208
21. Hu Z.M., and Dean T.A. A study of surface topography, friction and lubricants in metal forming. International Journal of Machine Tools and Manufacture 40 (2000) 1637-1649
22. Xie Y., and Williams J.A. The prediction of friction and wear when a soft surface slides against a harder rough surface. Wear 196 (1996) 21-34
23. Kailas S.V., and Menezes P.L. Coefficient of friction and material transfer studies of an Al-Mg aluminum alloy pin on EN8 steel flat using inclined scratch. Proceedings of International Seminar on Metal Forming - Process Design and Optimization (2003), Indian Institute of Science, India 124-143
24. Menezes P.L., Kishore, and Kailas S.V. Studies on friction and transfer layer using inclined scratch. Tribology International 39 2 (2006) 175-183
25. Menezes P.L., Kishore, and Kailas S.V. Role of surface topography on friction and transfer layer formation-a study using inclined scratch test. Proceedings of the World Tribology Congress III - 2005 (2005) 151-152
26. Menezes P.L., Kishore, and Kailas S.V. Studies on friction and transfer layer using inclined EN8 flat and aluminium pin. 1st International Conference on Advanced Tribology. Singapore (2004) B17-B18
27. Lundberg J. Influence of surface roughness on normal-sliding lubrication. Tribology International 28 5 (1995) 317-322
28. Wieleba W. The statistical correlation of the coefficient of friction and wear rate of PTFE composites with steel counterface roughness and hardness. Wear 252 (2002) 719-729
29. Hirst W., and Hollander A.E. Surface finish and damage in sliding. Proceedings of The Royal Society London, Series A 337 (1974) 379-394
30. Myers N.O. Characterization of surface roughness. Wear 5 (1962) 182-189
31. Singh R., Melkote S.N., and Hashimoto F. Frictional response of precision finished surfaces in pure sliding. Wear 258 (2005) 1500-1509
32. Koura M.M., and Omar M.A. The effect of surface parameters on friction. Wear 73 2 (1981) 235-246
33. Gadelmawla E.S., Koura M.M., Maksoud T.M.A., Elewa I.M., and Soliman H.H. Roughness parameters. Journal of Materials Processing Technology 123 1 (2002) 133-145
34. Whitehouse D.J. Handbook of Surface Metrology (1994), Rank Taylor Hobson Ltd., Institute of Physics Publishing, UK
35. Feder J. Fractals (1988), Plenum Press, New York
36. Hasegawa M., Liu J., Okuda K., and Nunobiki M. Calculation of fractal dimension of machined surface profiles. Wear 192 (1996) 40-45
37. Bowden F.P., and Tabor D. The Friction and Lubrication of Solids (1954), Clarendon, Oxford
38. Fischer T.E., Bhattacharya S., and Salher R. Lubrication by a smectic liquid crystal. Tribology Transactions 31 (1988) 442-448
39. Hamrock B.J., and Dowson D. Ball Bearing Lubrication (1981), John Willey and Sons, New York, USA
40. Stachowiak G.W., and Batchelor A.W. Engineering Tribology (2001), Butterworth Heinemann, USA
41. Torrance A.A. Using profilometry for the quantitative assessment of tribological function: PC-based software for friction and wear prediction. Wear 181-183 (1995) 397-404
42. Bhushan B., and Nosonovsky M. Scale effects in dry and wet friction, wear, and interface temperature. Nanotechnology 15 (2004) 749-761
43. Black A.J., Kopalinsky E.M., and Oxley P.L.B. An investigation of the different regimes of deformation which can occur when a hard wedge slides over a soft surface: the influence of wedge angle, lubrication and prior plastic working of the surface. Wear 123 1 (1988) 97-114
44. Challen J.M., and Oxley P.L.B. An explanation of the different regimes of friction and wear using asperity deformation models. Wear 53 2 (1979) 229-243
45. Petryk H. Slip line field solutions for sliding contact. Proc. I. Mech. E., International conference, Tribology - Friction, Lubrication and Wear 50 years on, II (1987) 987-994
46. Ai X., and Cheng H.S. The effects of surface texture on EHL point contacts. Transactions of ASME-Journal of Tribology 118 (1996) 59-66
47. Tanaka K., Kato T., and Matsumoto Y. Molecular dynamics simulation of vibrational friction force due to molecular deformation in confined lubricant film. Journal of Tribology 125 (2003) 587-591
48. Gee M.L., McGuiggan P.M., and Israelachvili J.N. Liquid to Solid like transitions of molecularly thin films under shear. Journal of Chemical Physics 93 3 (1990) 1895-1906
49. Levent Demirel A., and Granick S. Transition from static to kinetic friction in a model lubricated system. Journal of Chemical Physics 109 (1998) 6889-6897
50. Kopalinsky E.M., and Black A.J. Metallic sliding friction under boundary lubricated conditions: Investigation of the influence of lubricant at the start of sliding. Wear 190 (1995) 197-203
51. Wang F.-X., Lacey P., Gates R.S., and Hsu S.M. A study of the relative surface conformity between two surfaces in sliding contact. Journal of Tribology 113 (1991) 755-761
52. Yoshioka N. A review of the micromechanical approach to the physics of contacting surfaces. Tectonophysics 277 (1997) 29-40
53. Sahoo P., and Roy Chowdhury S.K. A fractal analysis of adhesive wear at the contact between rough solids. Wear 253 (2002) 924-934
54. Varadi K., Neder Z., and Friedrich K. Evaluation of the real contact areas, pressure distributions and contact temperatures during sliding contact between real metal surfaces. Wear 200 (1996) 55-62