Tribological response of materials during sliding against various surface textures

Materials and Surface Engineering: Research and Development

Volumn , Issue , 2012, Pages 207-242

  Menezes, P ^a   Kishore, ^c   Kailas, S ^a   Lovell, M ^b  

^a INDIAN INSTITUTE OF SCIENCE   (India)

^b UNIVERSITY OF WISCONSIN MILWAUKEE   (United States)

^c NONE

Author keywords

Friction; Stick slip; Surface roughness; Surface texture; Transfer layer

Indexed keywords

EID: 84903921982     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/B978-0-85709-151-2.50007-9     Document Type: Chapter

References (45)

1. Bello D.O., Walton S. Surface topography and lubrication in sheet-metal forming. Tribol Int 1987, 20(2):59-65.
2. Bhushan B. Introduction to Tribology 2002, John Wiley and Sons Inc, New York.
3. Bouissou S., Petit J.P., Barquins M. Normal load, slip rate and roughness influence on the polymethylmethacrylate dynamics of sliding: 1. Stable sliding to stick-slip transition. Wear 1998, 214(2):156-164.
4. Bowden F.P., Tabor D. The Friction and Lubrication of Solids, Part 1 1950, Clarendon Press, Oxford.
5. Buckley D.H. Friction characteristics in vacuum of single and polycrystalline aluminum oxide in contact with themselves and with various metals. ASLE Trans 1967, 10:134-145.
6. Buckley D.H., Johnson R.L. The influence of crystal structure and some properties on hexagonal metals on friction and adhesion. Wear 1968, 11(6):405-419.
7. Costa H.L., Hutchings I.M. Effects of die surface patterning on lubrication in strip drawing. J Mater Process Technol 2009, 209(3):1175-1180.
8. Don J., Sun T.C., Rigney D.A. Friction and wear of Cu-Be and dispersion-hardened copper systems. Wear 1983, 91(2):191-199.
9. Dwivedi D.K., Arjun T.S., Thakur P., Vaidya H., Singh K. Sliding wear and friction behaviour of Al-18% Si-0.5% Mg alloy. J Mater Process Technol 2004, 152:323-328.
10. Farhat Z.N. Contribution of crystallographic texturing to the sliding friction behaviour of FCC and HCP metals. Wear 2001, 250(1-12):401-408.
11. Hayashi N., Matsui A., Takahashi S. Effect of surface topography on transferred film formation in plastic and metal sliding system. Wear 1999, 225-9:329-338.
12. Hu Z.M., Dean T.A. A study of surface topography, friction and lubricants in metal forming. Int J Mach Tool Manufact 2000, 40(11):1637-1649.
13. Hwang D.H., Gahr K.H.Z. Transition from static to kinetic friction of unlubricated or oil lubricated steel/steel, steel/ceramic and ceramic/ceramic pairs. Wear 2003, 255(1-6):365-375.
14. Kayaba T. A study of the wear and friction of some bearing materials. Wear 1962, 5:173-181.
15. Koura M.M. The effect of surface texture on friction mechanisms. Wear 1980, 63(1):1-12.
16. Kudo H. A note on the role of microscopically trapped lubricant at the tool-work interface. Int J Mech Sci 1965, 7(5):383-388.
17. Lakshmipathy R., Sagar R. Effect of die surface topography on die-work interfacial friction in open die forging. Int J Mach Tool Manufact 1992, 32(5):685-693.
18. Lim S.C., Ashby M.F., Brunton J.H. The effects of sliding conditions on the dry friction of metals. Acta Metall 1989, 37:767-772.
19. Lovell M.R., Kabir M.A., Menezes P.L., Higgs C.F. Influence of boric-acid additive size on green lubricant performance. Phil Trans R Soc A 2010, 368:4851-4868.
20. Ma W., Lu J. Effect of surface texture on transfer layer formation and tribological behaviour of copper-graphite composite. Wear 2011, 270:218-229.
21. Määttä A., Vuoristo P., Mäntylä T. Friction and adhesion of stainless steel strip against tool steels in unlubricated sliding with high contact load. Tribol Int 2001, 34(11):779-786.
22. Malayappan S., Narayanasamy R. An experimental analysis of upset forging of aluminium cylindrical billets considering the dissimilar frictional conditions at flat die surfaces. Int J Adv Manuf Technol 2004, 23:636-643.
23. Menezes P.L., Kishore, Kailas S.V. Effect of roughness parameter and grinding angle on coefficient of friction when sliding of Al-Mg alloy over EN8 steel. ASME J Tribol 2006, 128(4):697-704.
24. Menezes P.L., Kishore, Kailas S.V. Studies on friction and transfer layer using inclined scratch. Tribol Int 2006, 39(2):175-183.
25. Menezes P.L., Kishore, Kailas S.V. Influence of surface texture on coefficient of friction and transfer layer formation during sliding of pure magnesium pin on 080M40 (EN8) steel plate. Wear 2006, 261(5-6):578-591.
26. Menezes P.L., Kishore, Shimjith M., Kailas S.V. Influence of surface texture on friction and transfer layer formation in Mg-8Al alloy/steel tribo-system. Indian J Tribol 2007, 2(1):46-54.
27. Menezes P.L., Kishore, Kailas S.V. Effect of surface topography on friction and transfer layer during sliding. Tribol Online 2008, 3(1):25-30.
28. Menezes P.L., Kishore, Kailas S.V. Role of surface texture and roughness parameters in friction and transfer layer formation under dry and lubricated sliding conditions. Int J Mater Res 2008, 99(7):795-807.
29. Menezes P.L., Kishore, Kailas S.V. Studies on friction in iron-steel tribo-system under dry and lubricated conditions. Mater Manuf Process 2008, 23(7):698-707.
30. Menezes P.L., Kishore, Kailas S.V. Influence of inclination angle of plate on friction, stick-slip and transfer layer - a study of magnesium pin sliding against steel plate. Wear 2009, 267(1-4):476-484.
31. Menezes P.L., Kishore, Kailas S.V. Influence of surface texture and roughness parameters on friction and transfer layer formation during sliding of aluminium pin on steel plate. Wear 2009, 267(9-10):1534-1549.
32. Menezes P.L., Kishore, Kailas S.V. Study of friction and transfer layer formation in copper-steel tribo-system. Tribol Trans 2009, 52(5):611-622.
33. Menezes P.L., Kishore, Kailas S.V., Lovell M.R. Influence of roughness parameters and surface texture on friction during sliding of pure lead over 080M40 steel. Int J Adv Manuf Technol 2009, 43(7-8):731-743.
34. Menezes P.L., Kishore, Kailas S.V., Lovell M.R. Response of materials as a function of grinding angle on friction and transfer layer formation. Int J Adv Manuf Technol 2010, 49(5):485-495.
35. Menezes P.L., Kishore, Kailas S.V., Lovell M.R. Influence of inclination angle and machining direction on friction and transfer layer formation. J Tribol 2011, 133(1):014501.1-014501.8.
36. Mokhtar M.O.A., Zaki M., Shawki G.S.A. Effect of mechanical properties on frictional behaviour of metals. Tribol Int 1979, 12:265-268.
37. Mokhtar M.O.A., Zaki M., Shawki G.S.A. Correlation between the frictional behaviour and the physical properties of metals. Wear 1980, 65:29-34.
38. Nellemann T., Bay N., Wanheim T. Real area of contact and friction stress - the role of trapped lubricant. Wear 1977, 43(1):45-53.
39. Rasp W., Wichern C.M. Effects of surface-topography directionality and lubrication condition on frictional behaviour during plastic deformation. J Mater Process Technol 2002, 125-26:379-386.
40. Saha P.K., Wilson W.R.D., Timsit R.S. Influence of surface topography on the frictional characteristics of 3104 aluminum alloy sheet. Wear 1996, 197(1-2):123-129.
41. Schedin E. Galling mechanisms in sheet forming operations. Wear 1994, 179(1-2):123-128.
42. Staph H.E., Ku P.M., Carper H.J. Effect of surface roughness and surface texture on scuffing. Mech Mach Theor 1973, 8:197-208.
43. Suh N.P. Tribophysics 1986, Prentice-Hall, Inc, New Jersey.
44. Wagner S. Optimizing friction between die and sheet metal 2001, 245-267.
45. Wakuda M., Yamauchi Y., Kanzaki S., Yasuda Y. Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact. Wear 2003, 254(3-4):356-363.