Analysis of Strain Rates and Microstructural Evaluation during Metal Forming: Role of Surface Texture and Friction

Tribology Transactions

Volumn 55, Issue 5, 2012, Pages 582-589

  Menezes, Pradeep L ^a,b   Kishore, ^a   Kailas, Satish V ^a   Lovell, Michael R ^b  

^a INDIAN INSTITUTE OF SCIENCE   (India)

^b University of Wisconsin Milwaukee   (United States)

Author keywords

Friction; Metal Forming; Surface Texture

Indexed keywords

AL-MG ALLOY; COMPRESSION TESTS; DEFORMING MATERIALS; FINITE ELEMENT SIMULATIONS; FRICTION VALUES; GRINDING MARKS; HARDENED STEEL; HIGH COEFFICIENT-OF-FRICTION; LOW FRICTION; MATERIAL MICROSTRUCTURES; MICROSTRUCTURAL EVALUATION; NUMERICAL RESULTS; RANDOM SURFACES; STEEL PLATES; STRESS AND STRAIN; STRESS AND STRAIN RATE; SURFACE TEXTURES;

COMPRESSION TESTING; EXPERIMENTS; INTERFACE STATES; INTERFACES (MATERIALS); METAL FORMING; STRAIN RATE; SURFACES; TEXTURES; TRIBOLOGY;

FRICTION;

EID: 84865291323     PISSN: 10402004     EISSN: 1547397X     Source Type: Journal    
DOI: 10.1080/10402004.2012.683936     Document Type: Article

References (34)

1. Valberg, H. S. 2010. Applied Metal Forming: Including FEM Analysis, New York, NY: Cambridge University Press.
2. Kumar, S. 2008. Technology of Metal Forming Processes, New Delhi, India: Prentice-Hall India.
3. Malayappan, S. and Narayanasamy, R. 2004. An Experimental Analysis of Upset Forging of Aluminium Cylindrical Billets Considering the Dissimilar Frictional Conditions at Flat Die Surfaces. International Journal of Advanced Manufacturing Technology, 23: 636-643.
4. Määttä, A., Vuoristo, P. and Mäntylä, T. 2001. Friction and Adhesion of Stainless Steel Strip against Tool Steels in Unlubricated Sliding with High Contact Load. Tribology International, 34(11): 779-786.
5. Costa, H. L. and Hutchings, I. M. 2009. Effects of Die Surface Patterning on Lubrication in Strip Drawing. Journal of Materials Processing Technology, 209(3): 1175-1180.
6. Hu, Z. M. and Dean, T. A. 2000. A Study of Surface Topography, Friction and Lubricants in Metal Forming. International Journal of Machine Tools and Manufacture, 40(11): 1637-1649.
7. Lakshmipathy, R. and Sagar, R. 1992. Effect of Die Surface Topography on Die-Work Interfacial Friction in Open Die Forging. International Journal of Machine Tools and Manufacture, 32(5): 685-693.
8. Liu, Y. H., Chen, J., Yu, S. and Chen, X. W. 2006." Analysis of Three-Dimensional Upsetting Process by the Rigid-Plastic Reproducing Kernel Particle Method,". Acta Metallurgica Sinica, 19(5): 371-378.
9. Wang, X. W. and Zhu, X. H. 1995. Numerical Simulation of Deep-Drawing Process. Journal of Materials Processing Technology, 48(1-4): 123-127.
10. Wang, Z., Lu, J. and Wang, Z. R. 2001. Numerical and Experimental Research of the Cold Upsetting-Extruding of Tube Flanges. Journal of Materials Processing Technology, 110(1): 28-35.
11. Xu, W. L. and Rao, K. P. 1997. Analysis of the Deformation Characteristics of Spike-Forging Process through FE Simulations and Experiments. Journal of Materials Processing Technology, 70(1-3): 122-128.
12. Robinson, T., Ou, H. and Armstrong, C. G. 2004. Study on Ring Compression Test Using Physical Modeling and FE Simulation. Journal of Materials Processing Technology,: 54-59. 153-154
13. Prasad, Y. V. R. K. and Sasidhara, S. 1997. Hot Working Guide: A Compendium of Processing Maps, Materials Park, OH: ASM International.
14. Eghbali, B. 2010. Effect of Strain Rate on the Microstructural Development through Continuous Dynamic Recrystallization in a Microalloyed Steel. Materials Science and Engineering A, 527(15): 3402-3406.
15. Li, Q., Xu, Y. B., Lai, Z. H., Shen, L. T. and Bai, Y. L. 2000. Dynamic Recrystallization Induced by Plastic Deformation at High Strain Rate in a Monel Alloy. Materials Science and Engineering A, 276(1-2): 250-256.
16. Venugopal, S., Mannan, S. L. and Prasad, Y. V. R. K. 1996. Influence of Strain Rate and State-of-Stress on the Formation of Ferrite in Stainless Steel Type AISI 304 during Hot Working. Materials Letters, 26(3): 161-165.
17. Venugopal, S., Mannan, S. L. and Prasad, Y. V. R. K. 1994. Processing Maps for Hot Working of Commercial Frade Wrought Stainless Steel Type AISI 304. Materials Science and Engineering A, 177(1-2): 143-149.
18. Urcola, J. J. and Sellars, C. M. 1987. Influence of Changing Strain Rate on Microstructure during Hot Deformation. Acta Metallurgica, 35(11): 2649-2657.
19. Klimanek, P. and Pötzsch, A. 2002. Microstructure Evolution under Compressive Plastic Deformation of Magnesium at Different Temperatures and Strain Rates. Materials Science and Engineering A, 324(1-2): 145-150.
20. Menezes, P. L., Kishore, Kailas, S. V. and Lovell, M. R. 2009. Studies on Friction and Formation of Transfer Layer in HCP Metals. Journal of Tribology, 131(3): 031604.1-031604.9.
21. Menezes, P. L., Kishore, Kailas, S. V. and Lovell, M. R. 2011. Friction and Transfer Layer Formation in Polymer-Steel Tribo-System: Role of Surface Texture and Roughness Parameters. Wear, 271(9-10): 2213-2221.
22. Menezes, P. L., Kishore, Kailas, S. V. and Lovell, M. R. 2011. Role of Surface Texture, Roughness and Hardness on Friction during Unidirectional Sliding. Tribology Letters, 41(1): 1-15.
23. Menezes, P. L., Kishore and Kailas, S. V. 2006. Influence of Surface Texture on Coefficient of Friction and Transfer Layer Formation during Sliding of Pure Magnesium Pin on 080 M40 (EN8) Steel Plate. Wear, 261(5-6): 578-591.
24. Menezes, P. L., Kishore and Kailas, S. V. 2009. Role of Surface Texture of Harder Surface on Subsurface Deformation. Wear, 266(1-2): 103-109.
25. Masuko, M., Aoki, S. and Suzuki, A. 2005. Influence of Lubricant Additive and Surface Texture on the Sliding Friction Characteristics of Steel under Varying Speeds Ranging from Ultralow to Moderate. Tribology Transactions, 48(3): 289-298.
26. Menezes, P. L., Kishore and Kailas, S. V. 2006. Effect of Roughness Parameter and Grinding Angle on Coefficient of Friction When Sliding of Al-Mg Alloy over EN8 Steel. Journal of Tribology, 128: 697-704.
27. Menezes, P. L., Kishore and Kailas, S. V. 2006. Studies on Friction and Transfer Layer: Role of Surface Texture. Tribology Letters, 24(3): 265-273.
28. Menezes, P. L., Kishore and Kailas, S. V. 2009. Influence of Inclination Angle of Plate on Friction, Stick-Slip and Transfer Layer-A Study of Magnesium Pin Sliding against Steel Plate. Wear, 267(1-4): 476-484.
29. Menezes, P. L., Kishore and Kailas, S. V. 2009. Studies on Friction and Formation of Transfer Layer When Al-4Mg Alloy Pins Slid at Various Numbers of Cycles on Steel Plates of Different Surface Texture. Wear, 267(1-4): 525-534.
30. Menezes, P. L., Kishore and Kailas, S. V. 2009. Study of Friction and Transfer Layer Formation in Copper-Steel Tribo-System: Role of Surface Texture and Roughness Parameters. Tribology Transactions, 52(5): 611-622.
31. Zhu, D. and Hu, Y.-Z. 2001. Effects of Rough Surface Topography and Orientation on the Characteristics of EHD and Mixed Lubrication in Both Circular and Elliptical Contacts. Tribology Transactions, 44(3): 391-398.
32. Leszczyńska-Madej, B. and Richert, M. 2010. The Effect of Strain Rate on the Evolution of Microstructure in Aluminium Alloys. Journal of Microscopy, 237(3): 399-403.
33. Kailas, S. V. 2003. A Study of the Strain Rate Microstructural Response and Wear of Metals. Journal of Materials Engineering and Performance, 12(6): 629-637.
34. Rao, K. P., Prasad, Y. V. R. K. and Sivaram, K. 1990. Deformation Processing Map for Control of Microstructure in Al-4Mg Alloy. Materials Letters, 10(1-2): 66-70.