A study of the strain rate microstructural response and wear of metals

Journal of Materials Engineering and Performance

Volumn 12, Issue 6, 2003, Pages 629-637

  Kailas, Satish V ^a  

^a INDIAN INSTITUTE OF SCIENCE   (India)

Author keywords

Adiabatic shear banding; Flow banding; Homogeneous deformation; Microstructural response; Strain rate; Wear

Indexed keywords

COPPER; CRACK PROPAGATION; STRAIN RATE; TEMPERATURE; TITANIUM; WEAR OF MATERIALS;

ADIABATIC SHEAR BANDING; CRACK NUCLEATION; FLOW BANDING; HOMOGENEOUS DEFORMATION; UNIAXIAL COMPRESSION; WEAR RATE;

METALLOGRAPHIC MICROSTRUCTURE;

EID: 0346910505     PISSN: 10599495     EISSN: None     Source Type: Journal    
DOI: 10.1361/105994903322692411     Document Type: Article

References (39)

1. F.P. Bowden, A.J. Moore, and D. Tabor: "The Ploughing and Adhesion of Sliding Metals," J. Appl. Phy., 1943, 14, pp. 80-91.
2. F.P. Bowden and D. Tabor, The Friction and Lubrication of Solids, Part I, Oxford Press, Cambridge, UK, 1950, p. 1.
3. J.H. Dautzenberg and J.H. Zaat: "Quantitative Determination of Deformation by Sliding Wear," Wear, 1973, 23, pp. 9-19.
4. J.H. Dautzenberg and J.H. Zaat: "Model of Strain Distribution by Sliding Wear," Wear, 1973, 26, pp. 105-19.
5. W. Herst and J.K. Lancaster: "The Influence of Speed on Metallic Wear," Proc. R. Soc., Series A, 1961, 259, pp. 228-45.
6. A.W. Ruff: "Measurements of Plastic Strain in Copper Due to Sliding Wear," Wear, 1978, 46, pp. 251-61.
7. M.A. Moore and R.M. Douthwaite: "Plastic Deformation Below Worn Surfaces," Metall. Trans., 1978, 7A, pp. 1833-39.
8. A.T. Alpas, T. Hu, and J. Zhang: "Plastic Deformation and Damage Accumulation Below the Worn Surfaces," Wear, 1993, 162-164, pp. 188-95.
9. A. Dorison: "Primary Modes and Observable Phenomena in the Mechanical Wear of Metals," Wear, 1968, 11, pp. 29-40.
10. P. Nam Suh: "The Delamination Theory of Wear," Wear, 1973, 25, pp. 111-24.
11. E. Hornbogen: "The Role of Fracture Toughness in the Wear of Metals," Wear, 1975, 33, pp. 251-59.
12. D.A. Rigney and J.P. Hirth: "Plastic Deformation and Sliding Friction of Metals," Wear, 1979, 53, pp. 345-70.
13. P.B. Madakson: "The Frictional Behavior of Materials," Wear, 1983, 87, pp. 191-206.
14. R.S. Montgomery: "The Sliding Behaviors of Copper Alloys," Wear, 1983, 87, pp. 339-49.
15. K.L. Johnson: "Contact Mechanics and the Wear of Metals," Wear, 1995, 190, pp. 162-70.
16. D.A. Rigney: "Comments on the Sliding Wear of Metals," Tribol. Int., 1997, 30, pp. 361-67.
17. P.J. Blau: "Fifty Years of Research on the Wear of Metals," Tribol. Int., 1997, 30, pp. 321-31.
18. K. Kato: "Abrasive Wear of Metals," Tribol. Int., 1997, 30, pp. 333-38.
19. T. Agaki and K. Kato: "Effects of Hardness on the Wear Mode Diagram in Lubricated Sliding Friction of Carbon Steels," Wear, 1990, 141, pp. 1-5.
20. D.A. Rigney: "The Role of Hardness in the Sliding Wear Behavior of Materials," Wear, 1994, 175, pp. 63-69.
21. J.H. Dautzenberg: "The Role of Dynamic Recrystallization in Dry Sliding Wear," Wear, 1980, 60, pp. 401-11.
22. G. Beckman: "A Theory of Abrasive Wear Based on Shear Effects in Metallic Surfaces," Wear, 1980, 59, pp. 421-32.
23. N.P. Suh and H.C. Sin: "The Genesis of Friction," Wear, 1981, 69, pp. 91-114.
24. A.P. Rosenfield: "A Shear Instability Model of Sliding Wear," Wear, 1987, 116, pp. 319-28.
25. X. Qiu and M.E. Plesha: "A Theory of Dry Wear Based on Energy," ASME J. Tribol., 1992, 113, pp. 442-51.
26. K.H. Zum Gahr: "Microstructure and Wear of Materials" in Tribol. Series, Vol. 10, Elsevier, Amsterdam, 1987, p. 1.
27. H.C. Meng and K.C. Ludema: "Wear Models and Predictive Equations: Their Form and Content," Wear, 1995, 181-183, pp. 443-57.
28. Y.V.R.K. Prasad: "Advances in the Science of Mechanical Processing," Indian J. Technol., 1990, 28, pp. 435-61.
29. Anon., Hot Working Guide-A Compendium of Processing Maps, Y.V.R.K. Prasad and S. Sashidhara, ed., ASM Int., Materials Park, OH, 1997.
30. S.V. Kailas and S.K. Biswas: "Response to Two Dimensional Scratching by Wedges," Wear, 1993, 162-164, pp. 110-18.
31. S.V. Kailas and S.K. Biswas: "The Role of Strain Rate Response in Plane Strain Abrasion of Metals by a Wedge," Wear, 1995, 181-183, pp. 648-57.
32. S.V. Kailas and S.K. Biswas: "Sliding Wear of Titanium," ASME J. Tribol., 1997, 119, pp. 31-35.
33. S.V. Kailas and S.K. Biswas: "Sliding Wear of Copper Against Alumina," ASME J. Tribol., 1999, 121, pp. 795-801.
34. S.K. Biswas and S.V. Kailas: "Strain Rate Response and Wear of Metals," Tribol. Int., 1997, 30, pp. 369-75.
35. S.V. Kailas, Y.V.R.K. Prasad, and S.K. Biswas: "Microstructural Features of Flow Instabilities in α-Titanium Cylinders Under High Strain Rate Compression at 25°C-400°C," Metall. Trans., 1993, 24A, pp. 2513-20.
36. S. Venugopal, S.L. Mannan, and Y.V.R.K. Prasad: "Influence of State of Stress on the Processing Map for Hot Working Stainless Steel Type AISI 304L-Compression vs Torsion," Mat. Sci. Eng., 1993, A160, pp. 63-69.
37. S. Venugopal, S.L. Mannan, and Y.V.R.K. Prasad: "Influence of Cast Versus Wrought Microstructure on the Processing Map for Hot Working of Stainless Steel Type AISI 304," Materials Letters, 1993, 17, pp. 388-92.
38. S.V. Kailas, Y.V.R.K. Prasad, and S.K. Biswas: "Influence of Initial Texture on the Microstructural Instabilities During Compression of Commercial α-Titanium at 25°C-400°C," Metall. Trans., 1994, 25A, pp. 1425-34.
39. Z.N. Farhat: "Contribution of Crystallographic Texturing to the Sliding Friction Behavior of FCC and HCP Metals," Wear, 2001, 250, pp. 401-08.