Nanoscale patterning and welding by solvent-free dry particle spray and focused ion beam

International Journal of Precision Engineering and Manufacturing - Green Technology

Volumn 1, Issue 3, 2014, Pages 257-260

  Choi, Jung Oh ^a   Kim, Chung Soo ^a,b  

^a Seoul National University   (South Korea)

^b MASSACHUSETTS INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Nano particle deposition system; Nanoscale patterning; Nanoscale welding; Solvent free dry particle spray

Indexed keywords

CARBON NANOTUBES; DEPOSITION; ENERGY UTILIZATION; FOCUSED ION BEAMS; LITHOGRAPHY; NANOSTRUCTURED MATERIALS; SOLVENTS; WELDING; YARN;

AEROSOL DEPOSITION; NANO SCALE; NANO-PARTICLE DEPOSITION SYSTEMS (NPDS); NANOSCALE MANUFACTURING; NANOSCALE PATTERNING; NANOSCALE REGIME; REDUCING ENERGY CONSUMPTION; SOLVENT FREE;

NANOPARTICLES;

EID: 84903703754     PISSN: 22886206     EISSN: 21980810     Source Type: Journal    
DOI: 10.1007/s40684-014-0032-1     Document Type: Article

References (20)

1. Lipomi, D. J.; Wdiss, E. A.; Whitesides, G. M.; "Green Nanofabrication: Unconventional Approaches for the Conservative Use of Energy," in: Nanotechnology for the Energy Challenge, Martínez, G.; (Ed.), Wiley-VCH Verlag GmbH & Co. KGaA, pp. 229-279, 2010.
2. Duflou, J. R.; Sutherland, J. W.; Dornfeld, D.; Herrmann, C.; Jeswiet, J.; et al.; "Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach," CIRP Annals-Manufacturing Technology, Vol. 61, No. 2, pp. 587-609, 2012.
3. Abele, E.; Anderl, R.; Birkhofer, H.; "Environmentally-friendly Product Development," Springer, 2005.
4. Chun, D. M.; Choi, J. O.; Lee, C. S.; Kanno, I.; Kotera, H.; et al.; "Nano-particle Deposition System (NPDS): Low Energy Solventfree Dry Spray Process for Direct Patterning of Metals and Ceramics at Room Temperature," Int. J. Precis. Eng. Manuf.; Vol. 13, No. 7, pp. 1107-1112, 2012.
5. Chun, D. M.; Kim, M. H.; Lee, J. C.; Ahn, S. H.; "Nano Particle Deposition System (NPDS) for Ceramic and Metal Coating at Room Temperature and Low Vacuum Condition," Proc. of the ICSMA International Conference on Smart Manufacturing Application, pp. 383-386, 2008.
6. Wang, Q.; Spencer, K.; Birbilis, N.; Zhang, M. X.; "The Influence of Ceramic Particles on Bond Strength of Cold Spray Composite Coatings on AZ91 Alloy Substrate," Surface and Coatings Technology, Vol. 205, No. 1, pp. 50-56, 2010.
7. Chun, D. M.; Kim, C. S.; Choi, J. O.; Lee, G. Y.; Lee, C. S.; et al.; "Multilayer Deposition of Ceramic and Metal at Room Temperature using Nanoparticle Deposition System (NPDS) and Planarization Process," International Journal of Advanced Manufacturing Technology, Vol. 72, No. 1-4, pp. 41-46, 2014.
8. Lupoi, R. and O'Neill, W.; "Deposition of Metallic Coatings on Polymer Surfaces using Cold Spray," Surface and Coatings Technology, Vol. 205, No. 7, pp. 2167-2173, 2010.
9. Ghelichi, R.; MacDonald, D.; Bagherifard, S.; Jahed, H.; Guagliano, M.; et al.; "Microstructure and Fatigue Behavior of Cold Spray Coated AL5052," Acta Materialia, Vol. 60, No. 19, pp. 6555-6561, 2012.
10. Piechowiak, M. A.; Henon, J.; Durand-Panteix, O.; Etchegoyen, G.; Coudert, V.; et al.; "Growth of Dense Ti3SiC2 MAX Phase Films Elaborated at Room Temperature by Aerosol Deposition Method," Journal of the European Ceramic Society, Vol. 34, No. 5, pp. 1063-1072, 2014.
11. Akedo, J.; "Room Temperature Impact Consolidation (RTIC) of Fine Ceramic Powder by Aerosol Deposition Method and Applications to Microdevices," Journal of Thermal Spray Technology, Vol. 17, No. 2, pp. 181-198, 2008.
12. Kim, C. W.; Choi, J. H.; Kim, H. J.; Lee, D. W.; Hyun, C. Y.; et al.; "Effects of Interlayer Roughness on Deposition Rate and Morphology of Aerosol-deposited Al2O3 Thick Films," Ceramics International, Vol. 38, No.7, pp. 5621-5627, 2012.
13. Kim, M. S.; Chun, D. M.; Choi, J. O.; Lee, J. C.; Kim, K. S.; et al.; "Room Temperature Deposition of TiO2 using Nano Particle Deposition System (NPDS): Application to Dye-sensitized Solar Cell (DSSC)," Int. J. Precis. Eng. Manuf.; Vol. 12, No.4, pp. 749-752, 2011.
14. Ahn, S. H.; Chun, D. M.; Kim, C. S.; "Nanoscale Hybrid Manufacturing Process by Nano Particle Deposition System (NPDS) and Focused Ion Beam (FIB)," CIRP Annals-Manufacturing Technology, Vol. 60, No. 1, pp. 583-586, 2011.
15. Chun, D. M. and Ahn, S. H.; "Deposition Mechanism of Dry Sprayed Ceramic Particles at Room Temperature using a Nanoparticle Deposition System," Acta Materialia, Vol. 59, No. 7, pp. 2693-2703, 2011.
16. Bakshi, S. R.; Singh, V.; Balani, K.; McCartney, D. G.; Seal, S.; et al.; "Carbon Nanotube Reinforced Aluminum Composite Coating via Cold Spraying," Surface and Coatings Technology, Vol. 202, No. 21, pp. 5162-5169, 2008.
17. Inada, R.; Shibukawa, K.; Masada, C.; Nakanishi, Y.; Sakurai, Y.; "Characterization of As-deposited Li4Ti5O12 Thin Film Electrode Prepared by Aerosol Deposition Method," Journal of Power Sources, Vol. 253, pp.{181-186}, 2014.
18. Klinkow, S. V.; Kosarev, V. F.; Rein, M.; "Cold Spray Deposition: Significance of Particle Impact Phenomena," Aerospace and Technology, Vol. 9, No. 7, pp.{582-591}, 2005.
19. Ahn, S. H.; Choi, J. O.; Kim, C. S.; Lee, G. Y.; Lee, H. T.; et al, "Laser-assisted Nano Particle Deposition System and Its Application for Dye Sensitized Solar Cell Fabrication," CIRP Annals-Manufacturing Technology, Vol. 61, No. 1, pp. 575-578, 2012.
20. Kim, C. S.; Ahn, S. H.; Jang, D. Y.; "Review: Developments in Micro/Nanoscale Fabrication by Focused Ion Beams," Vacuum, Vol. 86, No. 8, pp.{1014-1035}, 2012.