메뉴 건너뛰기




Volumn 53, Issue 9, 2014, Pages

Magnetorheological finishing for removing surface and subsurface defects of fused silica optics

Author keywords

fused silica; laser damage; magnetorheological finishing; polishing

Indexed keywords

FUSED SILICA; LASER DAMAGE; OPTICS; POLISHING;

EID: 84901724871     PISSN: 00913286     EISSN: 15602303     Source Type: Journal    
DOI: 10.1117/1.OE.53.9.092010     Document Type: Article
Times cited : (71)

References (28)
  • 1
    • 84901700166 scopus 로고
    • Magnetorheological polishing devices and methods
    • W. Kordonsky et al., "Magnetorheological polishing devices and methods,"U.S. Patent 5,449,313 (1993).
    • (1993) U.S. Patent , vol.5 , Issue.449 , pp. 313
    • Kordonsky, W.1
  • 2
    • 36148984651 scopus 로고    scopus 로고
    • System for abrasive jet shapingand polishing of a surface using magnetorheological fluid
    • W. Kordonski, D. Golini, and S. Hogan, "System for abrasive jet shapingand polishing of a surface using magnetorheological fluid," U.S.Patent 5,971,835 (1999).
    • (1999) U.S. Patent , vol.5 , Issue.971 , pp. 835
    • Kordonski, W.1    Golini, D.2    Hogan, S.3
  • 4
    • 84875481585 scopus 로고    scopus 로고
    • New York
    • QED Technology, New York, http://www.qedmrf.com.
    • QED Technology
  • 5
    • 77955609471 scopus 로고    scopus 로고
    • Process parametereffects on material removal in magnetorheological finishing of borosilicateglass
    • C. Miao, J. C. Lambropoulos, and S. D. Jacobs, "Process parametereffects on material removal in magnetorheological finishing of borosilicateglass," Appl. Opt. 49(10), 1951-1963 (2010).
    • (2010) Appl. Opt. , vol.49 , Issue.10 , pp. 1951-1963
    • Miao, C.1    Lambropoulos, J.C.2    Jacobs, S.D.3
  • 7
    • 42149133783 scopus 로고    scopus 로고
    • Complete sub-aperture pre-polishing & finishing solutionto improve speed and determinism in asphere manufacture
    • P. Dumas et al., "Complete sub-aperture pre-polishing & finishing solutionto improve speed and determinism in asphere manufacture,"Proc. SPIE 6671, 667111 (2007).
    • (2007) Proc. SPIE , vol.6671 , pp. 667111
    • Dumas, P.1
  • 8
    • 42149111803 scopus 로고    scopus 로고
    • Manufacturing meter-scale aspheric optics
    • W. Messner et al., "Manufacturing meter-scale aspheric optics," Proc.SPIE 6671, 667106 (2007).
    • (2007) Proc. SPIE , vol.6671 , pp. 667106
    • Messner, W.1
  • 9
    • 34247516515 scopus 로고    scopus 로고
    • MRF applications:On the road to making largeapertureultraviolet laser resistant continuous phase plates for high power lasers
    • J. Menapace et al., "MRF applications: on the road to making largeapertureultraviolet laser resistant continuous phase plates for highpowerlasers," Proc. SPIE 6403, 64030N (2006).
    • (2006) Proc. SPIE , vol.6403
    • Menapace, J.1
  • 10
    • 84892692441 scopus 로고    scopus 로고
    • Magnetorheological elastic super-smooth finishing forhigh-efficiency manufacturing of ultraviolet laser resistant optics
    • F. Shi et al., "Magnetorheological elastic super-smooth finishing forhigh-efficiency manufacturing of ultraviolet laser resistant optics,"Opt. Eng. 52(7), 075104 (2013).
    • (2013) Opt. Eng. , vol.52 , Issue.7 , pp. 075104
    • Shi, F.1
  • 11
    • 5544274018 scopus 로고    scopus 로고
    • Influence of subsurface cracks onlaser induced surface damage
    • M. D. Feit and A. M. Rubenchik, "Influence of subsurface cracks onlaser induced surface damage," Proc. SPIE 5273, 264-272(2004).
    • (2004) Proc. SPIE , vol.5273 , pp. 264-272
    • Feit, M.D.1    Rubenchik, A.M.2
  • 12
    • 0038115235 scopus 로고    scopus 로고
    • Role of light intensification by cracks in opticalbreakdown on surfaces
    • F. Y. Génin et al., "Role of light intensification by cracks in opticalbreakdown on surfaces," J. Opt. Soc. Am. A 18(10), 2607-2616(2001).
    • (2001) J. Opt. Soc. Am. A , vol.18 , Issue.10 , pp. 2607-2616
    • Génin, F.Y.1
  • 14
    • 28944453518 scopus 로고    scopus 로고
    • Polishing-induced contamination of fused silica optics and laser induced damage density at 351 nm
    • DOI 10.1364/OPEX.13.010163
    • J. Neauport et al., "Polishing-induced contamination of fused silicaoptics and laser induced damage density at 351 nm," Opt. Exp. 13(25), 10163-10171 (2005). (Pubitemid 41785228)
    • (2005) Optics Express , vol.13 , Issue.25 , pp. 10163-10171
    • Neauport, J.1    Lamaignere, L.2    Bercegol, H.3    Pilon, F.4    Birolleau, J.-C.5
  • 15
    • 44449118329 scopus 로고    scopus 로고
    • Concerning the impact of polishing induced contaminationof fused silica optics on the laser-induced damage density at351 nm
    • J. Neauport et al., "Concerning the impact of polishing induced contaminationof fused silica optics on the laser-induced damage density at351 nm," Opt. Commun. 281(14), 3802-3805 (2008).
    • (2008) Opt. Commun. , vol.281 , Issue.14 , pp. 3802-3805
    • Neauport, J.1
  • 16
    • 67249157770 scopus 로고    scopus 로고
    • Forces acting between polishing tool and workpiecesurface in magnetorheological finishing
    • M. Schinhaerl et al., "Forces acting between polishing tool and workpiecesurface in magnetorheological finishing," Proc. SPIE 7060,706006 (2008).
    • (2008) Proc. SPIE , vol.7060 , pp. 706006
    • Schinhaerl, M.1
  • 17
    • 77953926045 scopus 로고    scopus 로고
    • Tribological properties of a magnetorheological (MR)fluid in a finishing process
    • J. Seok et al., "Tribological properties of a magnetorheological (MR)fluid in a finishing process," Tribol. Trans. 52(4), 460-469 (2009).
    • (2009) Tribol. Trans. , vol.52 , Issue.4 , pp. 460-469
    • Seok, J.1
  • 18
    • 67249146494 scopus 로고    scopus 로고
    • Shear stress in magnetorheological finishing forglasses
    • C. Miao et al., "Shear stress in magnetorheological finishing forglasses," Appl. Opt. 48(13), 2585-2594 (2009).
    • (2009) Appl. Opt. , vol.48 , Issue.13 , pp. 2585-2594
    • Miao, C.1
  • 19
    • 33244460776 scopus 로고    scopus 로고
    • Comparison of different magnetorheological polishingfluids
    • M. Schinhaerl et al., "Comparison of different magnetorheological polishingfluids," Proc. SPIE 5965, 596528 (2005).
    • (2005) Proc. SPIE , vol.5965 , pp. 596528
    • Schinhaerl, M.1
  • 20
    • 84890067073 scopus 로고    scopus 로고
    • Using STED and ELSM confocal microscopy for abetter knowledge of fused silica polished glass interface
    • R. Catrin et al., "Using STED and ELSM confocal microscopy for abetter knowledge of fused silica polished glass interface," Opt. Express21(24), 29769-29779 (2013).
    • (2013) Opt. Express , vol.21 , Issue.24 , pp. 29769-29779
    • Catrin, R.1
  • 21
    • 0032671257 scopus 로고    scopus 로고
    • Development of practical damage mapping andinspection systems
    • F. Rainer et al., "Development of practical damage mapping andinspection systems," Proc. SPIE 3492, 556-563 (1999).
    • (1999) Proc. SPIE , vol.3492 , pp. 556-563
    • Rainer, F.1
  • 23
    • 0001465333 scopus 로고
    • Surface flow in crystalline solids under mechanical disturbance
    • G. T. Beilby, "Surface flow in crystalline solids under mechanical disturbance,"Proc. R. Soc. London 72(477486), 218-225 (1903).
    • (1903) Proc. R. Soc. London , vol.72 , pp. 218-225
    • Beilby, G.T.1
  • 24
    • 33751194654 scopus 로고    scopus 로고
    • Sub-surface mechanical damage distributionsduring grinding of fused silica
    • T. Suratwala et al., "Sub-surface mechanical damage distributionsduring grinding of fused silica," J. Non-Cryst. Solids 352(52-54),5601-5617 (2006).
    • (2006) J. Non-Cryst. Solids , vol.352 , Issue.5254 , pp. 5601-5617
    • Suratwala, T.1
  • 25
    • 57749199739 scopus 로고    scopus 로고
    • Scratch forensics
    • T. Suratwala et al., "Scratch forensics," Opt. Photonics News 09,12-15 (2008).
    • (2008) Opt. Photonics News , vol.9 , pp. 12-15
    • Suratwala, T.1
  • 26
    • 0031289588 scopus 로고    scopus 로고
    • Depth profiling of polishing-inducedcontamination on fused silica surfaces
    • M. Kozlowski et al., "Depth profiling of polishing- inducedcontamination on fused silica surfaces," Proc. SPIE 3244, 365-375(1998).
    • (1998) Proc. SPIE , vol.3244 , pp. 365-375
    • Kozlowski, M.1
  • 28
    • 84892692441 scopus 로고    scopus 로고
    • Magnetorheological elastic super-smooth finishing forhigh efficiency manufacturing of ultraviolet laser resistant optic
    • F. Shi et al., "Magnetorheological elastic super-smooth finishing forhigh efficiency manufacturing of ultraviolet laser resistant optic,"Opt. Eng. 52(7), 075104 (2013).
    • (2013) Opt. Eng. , vol.52 , Issue.7 , pp. 075104
    • Shi, F.1


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.