A control-oriented charge mixing and two-zone HCCI combustion model

IEEE Transactions on Vehicular Technology

Volumn 63, Issue 3, 2014, Pages 1079-1090

  Zhang, Shupeng ^a   Zhu, Guoming ^a   Sun, Zongxuan ^b  

^a Michigan State University   (United States)

^b University of Minnesota   (United States)

Author keywords

Charge mixing; internal combustion engine; two zone combustion model

Indexed keywords

INTERNAL COMBUSTION ENGINES; MIXING; STAINLESS STEEL;

COMBUSTION MODEL; COMBUSTION PRO-CESS; CONTROL ORIENTED MODELS; CONTROL STRATEGIES; HARDWARE-IN-THE-LOOP SIMULATION; HOMOGENEOUS CHARGE COMPRESSION IGNITION COMBUSTIONS; PEAK IN-CYLINDER PRESSURES; REAL TIME SIMULATIONS;

IGNITION;

EID: 84896904949     PISSN: 00189545     EISSN: None     Source Type: Journal    
DOI: 10.1109/TVT.2013.2285074     Document Type: Article

References (22)

1. H. Zhao, HCCI and CAI Engines for the Automotive Industry. Cambridge, U.K.: Woodhead, 2007, pp. 6-36.
2. R. H. Stanglmaier and C. E. Roberts, "Homogeneous Charge Compression Ignition (HCCI): Benefits, compromises, and future engine applications, " presented at the International Fuels & Lubricants Meeting & Exposition, Dearborn, MI, USA, 1999, SAE Tech. Paper 1999-01-3682.
3. P. Kongsereeparp, B. Kashani, and M. D. Checkel, "A stand-along multi-zone model for combustion in HCCI engines, " in Proc. ASME Int. Combust. Engine Div. Fall Tech. Conf., Ottawa, ON, Canada, Sep. 2005, pp. 265-274. (Pubitemid 43251421)
4. N. P. Komninos, "Modeling HCCI combustion: Modification of a multi-zone model and comparison to experimental results at varying boost pressure, " Appl. Energy, vol. 86, no. 10, pp. 2141-2151, Oct. 2009.
5. D. J. Rausen and A. G. Stefanopoulou, "A mean-value model for control of Homogeneous Charge Compression Ignition (HCCI) engines, " Trans. ASME, J. Dyn. Syst. Meas. Control, vol. 127, no. 3, pp. 355-362, Aug. 2005. (Pubitemid 41359651)
6. G. M. Shaver, M. J. Roelle, and J. C. Gerdes, "Modeling cycle-to-cycle dynamics and mode transition in HCCI engines with variable valve actuation, " Control Eng. Pract., vol. 14, no. 3, pp. 213-222, Mar. 2006. (Pubitemid 43012930)
7. X. Yang and G. Zhu, "A control-oriented hybrid combustion model of a homogeneous charge compression ignition capable spark ignition engine, " Proc. Inst. Mech. Eng. D, J. Autom. Eng., vol. 226, no. 10, pp. 1380-1395, Oct. 2012.
8. V. Tandra and N. Srivastava, "A two zone model of a single cylinder HCCI engine for control applications, " in Proc. ASME Dyn. Control Conf., Ann Arbor, MI, USA, Oct. 2008, pp. 63-70.
9. S. Zhang, G. Zhu, Y. Yoon, and Z. Sun, "A control oriented charge mixing and HCCI combustion model for internal combustion engines, " in Proc. ASMEDyn. Syst. Control Conf., 2012, vol. 226, pp. 1380-1395.
10. J. B. Heywood, Internal Combustion Engine Fundamentals. New York, NY, USA: McGraw-Hill, 1988.
11. G. Woschni, "A universally applicable equation for instantaneous heat transfer coefficient in the internal combustion engine, " SAE Tech. Paper 670931, SAE Trans., vol. 76, 1967.
12. J. Chang and O. Guralp, "New heat transfer correlation for an HCCI engine derived from measurements of instantaneous surface heat, " presented at the Powertrain & Fluid Systems Conference & Exhibition, Tampa, FL, USA, 2004, SAE Tech. Paper 2004-01-2996.
13. A. M. Mahrous, M. Wyszynski, H. Xu, A. Tsolakis, and J. Qiao, "Effect of intake valves timings on in-cylinder charge characteristics in a DI engine cylinder with negative valve overlapping, " presented at the SAE World Congress & Exhibition, Detroit, MI, USA, 2008, SAE Tech. Paper 2008-01-1347.
14. T. Lucchini, G. D'Errico, and M. Fiocco, "Multi-dimensional modeling of gas exchange and fuel-air mixing process in a direct-injection, gas fueled engine, " presented at the 10th International Conference on Engines & Vehicles, Napoli, Italy, 2011, SAE Tech. Paper 2011-24-0036.
15. R. B. Bird, W. E. Stewart, and E. N. Lightfoot, Transport Phenomena. Hoboken, NJ, USA: Wiley, 2007, p. 659.
16. M. Hillion, J. Chauvin, and N. Petit, "Controlling the start of combustion on an HCCI diesel engine, " in Proc. Amer. Control Conf., Seattle, WA, USA, Jun. 2008, pp. 2084-2091.
17. J. Bengtsson, M. Gafvert, and P. Strandh, "Modeling of HCCI engine combustion for control analysis, " in Proc. 43rd IEEE Conf. Decision Control, Atlantis, Bahamas, Dec. 2004, pp. 1682-1687. (Pubitemid 40291198)
18. S. Tanaka, F. Ayala, J. C. Keck, and B. Heywood, "Two-stage ignition in HCCI combustion and HCCI control by fuels and additives, " Combust. Flame, vol. 132, no. 1/2, pp. 219-239, Feb. 2003. (Pubitemid 36164894)
19. A. Iqbal, A. Selamet, R. Reese, and R. Vick, "Ignition delay correlation for predicting autoignition of a Toluene reference fuel blend in spark ignition engines, " presented at the SAE World Congress & Exhibition, Detroit, MI, USA, 2011, SAE Tech. Paper 2011-01-0338.
20. M. Canova, R. Garcin, S. Midlam-Mohler, Y Guezennec, and G Rizzoni, "A control-oriented model of combustion process in a HCCI diesel engine, " in Proc. Amer. Control Conf, Portland, OR, USA, Jun. 2005, pp. 4446-4451. (Pubitemid 41188704)
21. D. Kawano, H. Naito, H. Suzuki, H. Ishii, S. Hori, Y Goto, and M. Odaka, "Effect of fuel properties on combustion and exhaust emissions of Homogeneous Charge Compression Ignition (HCCI) engine, " presented at the SAE Fuels & Lubricants Meeting & Exhibition, Baltimore, MD, USA, 2004, SAE Tech. Paper 2004-01-1966.
22. K. Kuwahara, T. Tada, M. Furutani, Y Sakai, and H. Ando, "Chemical kinetics study on two-stage main heat release in ignition process of highly diluted mixtures, " presented at the SAE World Congress & Exhibition, Detroit, MI, USA, 2013, SAE Tech. Paper 2013-01-1657.