Investigation into the formation mechanism and distribution characteristics of suspended microparticles in MQL grinding

Recent Patents on Mechanical Engineering

Volumn 7, Issue 1, 2014, Pages 52-62

  Jia, Dongzhou ^a   Li, Changhe ^a   Zhang, Dongkun ^a   Wang, Sheng ^a   Hou, Yali ^a  

^a QINGDAO TECHNOLOGICAL UNIVERSITY   (China)

Author keywords

Grinding; Jet parameters; Minimal quantity lubrication (MQL); Spray droplets; Suspended microparticles

Indexed keywords

COST EFFECTIVENESS; DISTRIBUTION FUNCTIONS; DROPS; ENERGY CONSERVATION; LUBRICATION; PATENTS AND INVENTIONS; SUSTAINABLE DEVELOPMENT;

DISTRIBUTION CHARACTERISTICS; FORMATION MECHANISM; GAS LIQUID FLOWS; JET PARAMETERS; MACHINING PROCESS; MICRO PARTICLES; MINIMAL QUANTITY LUBRICATION; MINIMAL QUANTITY LUBRICATIONS; SPRAY DROPLET; SUSPENDED MICROPARTICLE;

GRINDING (MACHINING);

EID: 84896871447     PISSN: 22127976     EISSN: 1874477X     Source Type: Journal    
DOI: 10.2174/2212797606666131231000234     Document Type: Article

References (49)

1. Shokrani A, Dhokia V, Newman ST. Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids. Int J Machine Tool Manuf 2012; 57: 83-101.
2. Donaldson K, Li XY, MacNee W. Ultrafine (nanometer) particle mediated lung injury. J Aerosol Sci 1998; 29(5): 553-60.
3. Park K-H, Olortegui-Yume J, Yoon M-C. A study on droplets and their distribution for minimum quantity lubrication (MQL). Int J Machine Tool Manuf 2010; 50(9): 824-33.
4. Hasib MA, Al-Faruk A, Ahmed N. Mist application of cutting fluid. Int J Mech Eng IJMME-IJENS, 2010; 10(4): 10-4.
5. Kopac J, Krajnik P. High-performance grinding-A review. J Mater Process Technol 2006; 175(1-3): 278-84.
6. Varghese B, Hare SP, Gao R, Guo C, Malkin S. Development of a sensor-integrated "Intelligent" grinding wheel for in-process monitoring. Ann CIRP 2000; 49(1): 265-70.
7. Brinksmeier E, Mutlugunes Y, Klocke F, Aurich JC, Shore P, Ohmori H. Ultra-precision grinding. CIRP Ann-Manuf Techn 2010; 59(2): 652-71.
8. Wegener K, Hoffmeister H-W, Karpuschewski B, Kuster F, Hahmann W-C, Rabiey M. Conditioning and monitoring of grinding wheels. CIRP Ann-Manuf Techn 2011; 60(2): 757-78.
9. Oliveira FG, Silva EJ, Guo C, Hashimoto F. Industrial challenges in grinding. CIRP Ann-Manuf Techn 2009; 58(2): 663-80.
10. Liu JH, Pei ZJ, Graham RF. Grinding wheels for manufacturing of silicon wafers: A literature review. Int J Mach Tool Manuf 2007; 47(1): 1-13.
11. Li CH, Cai GQ, Xiu SC. Auto-correlation study on the surface profile finished by abrasive jet with grinding wheel as restraint. Int J Comput Appl Technol 2007; 29(2-4): 262-5.
12. Baheti U, Guo C, Malkin S. Environmentally conscious cooling and lubrication for grinding. Proc Int Sem Improv Mach Tool Perform 1998; 2: 643-54.
13. Jin T, Cai GQ. Analytical thermal models of oblique moving heat source plane for deep grinding and cutting. J Manufact Sci Eng-ASME 2001; 123(1): 185-90.
14. Malkin S, Guo C. Thermal analysis of grinding. CIRP Ann-Manuf Techn 2007; 56(2): 760-82.
15. Brinksmeier E, Aurich JC, Govekar E, Heinzel C, Hoffmeister HW, Klocke F, et al. Advances in modeling and simulation of grinding processes. CIRP Ann-Manuf Techn 2006; 55(2): 667-96.
16. Klocke F, Brinksmeier E, Weinert K. Capability profile of hard cutting and grinding processes. CIRP Ann-Manuf Techn 2005; 54(2): 557-81.
17. Xiu SC, Chao CX, Pei SY. Experimental research on surface integrity with less or non fluid grinding process. Key Eng Mater 2011; 487(8): 89-93.
18. Li CH, Hou YL, Ding YC, Cai GQ. Feasibility investigations on compound process: A novel fabrication method for finishing with grinding wheel as restraint. Int J Comput Mater Sci Surf Eng 2011; 4(1): 55-68.
19. Li CH, Wang S, Zhang Q, Ding YC. Influence of unbalanced response of ultra-high speed grinder spindle on dynamic performance. Int J Mater Product Technol 2012; 45(1-4): 119-31.
20. Aurich SC, Braun O, Warnecke G. Development of a superabrasive grinding wheel with defined grain structure using kinematic simulation. Ann CIRP 2003; 52(1): 275-80.
21. nded. Industrial Press Inc.: USA, 2008.
22. Huang H, Liu TC. Experimental investigations of machining characteristics and removal mechanisms of advanced ceramics in high speed deep grinding. Int J Mach Tool Manuf 2003; 43(8): 811-23.
23. Xu XP, Yu YQ, Xu HJ. Effect of grinding temperature on the surface integrity of a nickel-based superalloy. J Mater Process Technol 2002; 129(1-3): 359-63.
24. Webster J, Tricard M. Innovations in abrasive products for precision grinding. CIRP Ann-Manuf Techn 2004; 53(2): 597-618.
25. Evans CJ, Paul E, Dornfeld D, Lucca DA, Byrne G, Tricard M, et al. Material removal mechanisms in lapping and polishing. CIRP Ann-Manuf Techn 2003; 52(2): 611-33.
26. Hwang TW, Evans CJ, Malkin S. An investigation of high speed grinding with electroplated diamond wheels. Ann CIRP 2000; 49(1): 245-8.
27. Li CH, Liu ZR, Liu GY, Ding YC. Experimental investigations of mechanical characteristics and tribological mechanisms of nanometric zirconia dental ceramics. TOMSJ 2011; 5: 178-83.
28. 2dental ceramic grinding. Int J Mach Mach Mater 2012; 11(4): 342-52.
29. Li, C.H., Zhang, D., Jia, D., et al. Device and process for measuring the droplet microparticles distribution in MQL grinding. CN2013104302773 (2013).
30. Li CH, Li JY, Wang S, Zhang Q. Modeling and numerical simulation of the grinding temperature field with nanoparticle jet of MQL. Adv Mech Eng 2013; 2013: Article ID 986984, doi.org/10.1155/2013/986984.
31. Hou YL, Li CH, Han ZL, Li JY, Ding YC. Examination of the material removal mechanisms during the abrasive jet finishing of 45 steel. Adv Sci Lett 2011; 4(4-5): 1478-84.
32. 2grinding technology. J Clean Prod 2010; 18(18): 1840-9.
33. Barczak LM, Batako ADL, Morgan MN. A study of plane surface grinding under minimum quantity lubrication (MQL) conditions. Int J Mach Tool Manuf 2010; 50(11): 977-85.
34. Weinert K, Inasaki I, Sutherland JW, Wakabayashi T. Dry machining and minimum quantity lubrication. CIRP Ann-Manuf Technol 2004; 53(2): 511-37.
35. Wen D, Lin G, Vafaei S, Zhang K. Review of nanofluids for heat transfer applications. Particuology 2009; 7(2): 141-50.
36. Singh KK, Goswami TK. Design of a cryogenic grinding system for spices. J Food Eng 1999; 39(4): 359-68.
37. Shaji S, Radhakrishnan V. An investigation on surface grinding using graphite as lubricant. Int J Mach Tool Manuf 2002; 42(6): 733-40.
38. Li CH, Wang S, Zhang Q, Jia D. Evaluation of minimum quantity lubrication grinding with nano-particles and recent related patents. Recent Pat Nanotechnol 2013; 7(3): 167-81.
39. Hou Y, Li CH. Development of abrasive machining and recent related patents. Recent Pat Mech Eng 2013; 6(2): 122-31.
40. Li CH, Zhang Q, Wang S, Ding YC. Evaluation of the dynamic characteristics of coupled double-rotor spindle system in high speed grinder. Recent Pat Mech Eng 2012; 5(3): 208-19.
41. Li, C.H., Wang, S., Zhang, Q. Nanoparticle jet flow minimum quantity lubrication grinding lubricant supply system. CN102658526 (2012).
42. Suda, S., Yokota, H., Kochu, T., Matsuura, Y. Oil composition for use in trace oil supply cutting/grinding work. US8173582 (2012).
43. Li, C.H., Wang, S., Zhang, Q. Method and device for the prediction of the grinding surface roughness under nano-particle jet MQL. CN102954756 (2013).
44. Li, C.H., Han, Z.L., Yao, J.L., Ding, Y.C. Nanoparticles MQL grinding phase jet stream supply system. CN102287606 (2011).
45. Ohira, A., Ryoji, K., Yoshiaki, F., Hiroshi, N. Refrgierator. CN102954645 (2013).
46. Li, C.H., Hou, Y., Ding, Y.C. Technique of carbon nano tube (CNT) jet for the grinding of nickel-base alloy. CN102267098 (2011).
47. Li, C.H., Liu, Z.R., Hou, Y.L., Ding, Y.C. Process for grinding nanometer fluid. CN101722477 (2011).
48. Li, C.H., Li, J.R., Han, Z.L., Ding, Y.C. Device for measuring nano fluid heat conductivity coefficient and convection heat transfer coefficient. CN102323293 (2012).
49. Shibata, J., Sembongi, N., Ibi, M., Suda, S. Oil composition, and trace amount oil supply type cutting/grinding processing method. EP2546325 (2013).