Innovations in abrasive products for precision grinding

CIRP Annals - Manufacturing Technology

Volumn 53, Issue 2, 2004, Pages 597-617

  Webster, J ^a   Tricard, M ^b  

^a Saint Gobain Abrasives   (United States)

^b QED TECHNOLOGIES   (United States)

Author keywords

Abrasives; Grinding; Machine

Indexed keywords

ABRASIVES; ALUMINA; CERAMIC MATERIALS; ELECTROPLATING; MACHINE COMPONENTS; SILICON CARBIDE; SINGLE CRYSTALS; SOL-GELS; ZIRCONIA;

ABRASIVE PRODUCTS; ALPHA ALUMINA MONOHYDRATE; MULLITE; PRECISION GRINDING;

GRINDING (MACHINING);

EID: 12144277458     PISSN: 00078506     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0007-8506(07)60031-6     Document Type: Article

References (124)

1. Andrews, R., 1996, Wear Resistant Bond for Brazing and Abrasive Tool, Norton Company, US Patent 5,846,269.
2. Ardelt, T., 2000, Einfluss der Relativbewegung auf den Prozess und das Arbeitsergebnis beim Planschleifen mit Planetenkinematik, PhD Dissertation, Technical Univ. of Berlin.
3. Aurich, J., Braun, O., and Warnecke, G., 2003, Development of a Superabrasive Grinding Wheel with Defined Grain Structure Using Kinematic Simulation, Annals of the CIRP, 52/1:275-280.
4. Barlow, N., Jackson, M., and Hitchiner, M., 1996, Mechanical Design of High-Speed Vitrified cBN Grinding Wheels, Proc. of IMEC, Univ. of Connecticut, USA, p. 568-570.
5. Barnard, J., 1990, Grinding Tools at High Speeds Using MSL Wheels, SME Int. Grinding Conf.
6. Barry, J., Burrows, J., Aspinwall, D., Dewes, R., 2003, The use of Diamond and cBN Mounted Grinding Points for the Machining of Nickel-based Superalloys, Intertech, Vancouver.
7. Baylis, R., and Stone, B., 1989, The Effect of grinding Wheel Flexibility on Chatter, Annals of the CIRP, 38/1:307-310.
8. Berg; T., 1993, Shaped abrasive particles and method of making same, assigned to Minnesota Mining and Manufacturing Company, United States Patent 5,201,916.
9. Boehm, C., Seedorf, T., Meyer, L., Brinksmeier, E., and Binder, J., 2001, Temperature and Force Sensor Integrated Grinding Wheel for Process Monitoring, Abrasives Magazine, October/December.
10. W. Bohlheim, 1994, Performance of ABN260 and ABN360 in Surface Grinding HSS, IDR 4/94:187-191.
11. Bonner, A., Filed October 2003, Abrasive Articles with Novel Structures and Methods for Grinding, World Patent 03/086703 A1.
12. Bonner, A., Filed October 2003, Method of Roll Grinding, World Patent 03/086702 A1.
13. Bovenkerk, H. P.; Bundy, F. P.; Hall, H. T.; Strong, H. M., and Wentorf, R. H. Jr., Oct. 10 1959, Preparation of Diamond, Nature, 184 (4693): 1094-1098.
14. Bovenkerk, H. P.; Bundy, F. P.; Chrenko, R. M.; Codella, P. J.; Strong, H. M., and Wentorf, R. H. Jr., Sept. 1993, Errors in Diamond Synthesis, Nature, 365:19.
15. Brecker, J. N., 1974, The Fracture Strength of Abrasive Grains, Trans. Of ASME J. Eng. For Industry, 96:253-57.
16. Breder, K., Lara-Curzio, E., and Riester, L., 2004, Strength Testing System for Ceramic Grains, Ceramic Engineering and Science Proceedings, Published by the American Ceramic Society, 25.
17. Brinksmeier, E., and Brockhoff, T., 1996, Utilisation of Grinding Heat as a New Heat Treatment Process, Annals of the CIRP, 45/1:283-286.
18. Brockhoff, T., and Brinksmeier, E., 1999, Grind-Hardening: A Comprehensive View, Annals of the CIRP 48/1:255-260.
19. Bundy, F. P., Hall, H. T.; Strong, H. M., and Wentorf, R. H, Jul 9 1955, Man-Made Diamonds, Nature, 176:51-55.
20. Bzymek, Z., Song, G., Howes, T., and Garrett, R., 1994, Design of Flexible Grinding Wheel with Variable Hub Thickness, Trans. Of ASME, J. of Engineering for Industry, 250/116:260-262.
21. Chattopadhyay, A., and Hintermann, H., 1994, On Performance of Brazed Single-Layer CBN Wheel, Annals of the CIRP, 43/1:313-316.
22. Chattopadhyay, A., and Hintermann, H., 1993, On Improved Bonding of TiC-Coated cBN Grits in Nickel-Based Matrix, Annals of the CIRP, 42/1:413-416.
23. Cheape, Charles W., 1985, Family Firm to Modern Multinational - Norton Company, a New England Entreprise, Cambridge, MA, Harvard University Press.
24. Chiba, Y., Tani, Y., Enomoto, T., and Sato, H., 2003, Development of a High Speed Manufacturing Method for Electroplated Diamond Wire Tool, Annals of the CIRP, 52/1:281-284.
25. Comley, P., Smith, N., Pearce, T., Smith, D., and Ashfold, M., 2003, Performance and Wear Behaviour of Diamond Fibre Grinding Wheels when Grinding Glass, Advances in Abrasive Technology VI, ISAAT Conf., Bristol, UK,: 245-250.
26. Comley, P., Stephenson, D., and Corbett, J., 2003, High Efficiency Deep Grinding and the Effect on Surface Integrity, Advances in Abrasive Technology VI, ISAAT Conf., Bristol, UK,:207-212.
27. DiCorleto, J. 2001, Innovations in Abrasive Products for Precision Grinding, Precision Grinding and Finishing Conference, Gorham.
28. DMG Sauer, 2004, Product information, Seebach Germany, www.qildemeister.com.
29. Einset, E., 2003, Mixture of Abrasive Particles with Different Toughness, GE Company, World Patent 03043784.
30. Engineer, F., Guo, C., and Malkin, S., 1992, Experimental Measurement of Fluid Flow Through the Grinding Zone, J. of Engineering for Industry 114:61-66.
31. Enomoto, T., Shimazaki, Y., Tani, Y., Suzuki, M., and Kanda, Y., 1999, Development of a Resinoid Diamond Wire Containing Metal Powder for Slicing Silicon Ingot, Annals of the CIRP, 48/1:273-276.
32. d'Evelyn, M., 2003, Surface Functionalized Diamond Crystals and Methods for Producing Same, GE Company, European Patent 01008553.
33. Fisbacher, M., 2000, External Cylindrical Grinding with CBN - an Innovative Solution, Industrial Diamond Association, Intertech Conf., Vancouver, Canada.
34. Fischer, D., Ulmer, Filed 2001, Grindstone Cooled by Coolant has Coolant Supplied to Contact Surface Through Recess in Grindstone into which Coolant is Sprayed from Outside, German Patent 10103435.
35. abler, J., Hoffmeister, H-W., Menze, B., and Schafer, L., 2003, Micro-Abrasive Pencils with CVD Diamond Coating, Diamond Relat. Mat., 12/3-7:707-710.
36. Galen, E., 2001, Superabrasive Grinding Why Bond Selection Matters, Manufacturing Engineering Magazine, SME, 2.
37. Garg, Ajay K., April 11, 2000, Nano-sized Alpha Alumina Particles having a Silica Coating Thereon, assigned to Norton Company, US Patent 6,048,577.
38. Graham, W. and Whiston, M., 1978, Some Observations of Through-wheel Coolant Application in Grinding, Int. J. Machine Tool Design and Research, No. 18:9-18.
39. Guo, C., and Malkin, S., 1992, Analysis of Fluid Flow through the Grinding Zone, Trans. of the ASME, J. of Eng. for Industry, 114:427-434.
40. Harris, G., 1989, Long Life Resin Bond Wheels, Industrial Diamond Review, 3/89:123-125.
41. He, D., Akaishi, M., Scott, B., and Zhao, Y., 2002, J. Material Research, 17/284.
42. Heath, P. 1985, Structure, Properties and Applications of Polycrystalline Cubic Boron Nitride, Technical Report MR85-02, Soc. of Manufacturing Engineers, Apr 22-25.
43. Hill, P., et al, Filed December 1998, Method and Apparatus for Grinding, Rolls Royce, GB Patent 2332634A.
44. Hoffmeister, H-W, and Timmer, J.-H., 2000, Laser Conditioning of Superabrasive Grinding Wheels, Industrial Diamond Review, No. 60, Booklet 586,:209-218.
45. Hon, K. B. and Gill, T., 2003, Selective Laser Sintering of SiC/ Polyimide Composites, Annals of the CIRP, 52/1:173-176.
46. Hubert, H., Devouard, B., Garvie, L., O'Keeffe, M., Buseck, P., Petuskey, W., and McMillan, P., 1998, Nature 391/ 376.
47. Hyatt, G., Filed 2001, Grinding Wheel Comprising of Porous Material and a Device for Delivering Fluid Through the Wheel from a Location Inboard from the Outer Peripheral Surface, World Patent 200258886.
48. Ichida, Y., and Kishi, K., 1995, The Development of Nano-crystalline cBN for Enhanced Superalloy Grinding Performance, J. Manufacturing Science and Engineering, ASME, 1:349-361.
49. Inasaki, I., 1990, A New Preparation Method for Resinoid Bonded cBN Wheels, Annals of the CIRP, 39/1:317-320.
50. Ito, K., Noritake, Filed August 3 2001, Vitrified Abrasive Solid Mass Having Pores Filled with Resin and Solid Lubricant Agent, US Patent 6428587.
51. Itoh, N., et al., 1998, Characteristics of ELID Surface Grinding by Fine Abrasive Metal-Resin Bonded Wheel, Int. J. Japan Soc. Prec. Eng, 32:273-274.
52. Jackson, M., Wakefield, R., Jones, S., Mills, B., and Rowe, B., 2001, Materials Selection Applied to Vitrified Corundum Grinding Wheels, British Ceramic Trans., 100/5:229-236.
53. Joseph, W., 3M Company, Filed 2002, Agglomerate Production by Firing Spray Dried Mixture of Abrasive Particles and a Solution Formed of Oxide and Water, World Patent 200238338.
54. Karpuschewski, B., Wehmeier, M., and Inasaki, I., 2000, Grinding Monitoring System Based on Power and Acoustic Emission Sensors, Annals of the CIRP 49/1:235-240.
55. Klocke, F., and Merbecks, T., 2001, Characterization of Vitrified cBN Grinding Wheels, 4th Int. Machining and Grinding Conf., SME, Michigan
56. Klocke, F., Brinksmeier, E., Evans, C., Inasaki, I., Minke, E., Tonshoff, H-K., Webster, J., and Stuff, D., 1997, High Speed Grinding - Fundamentals and State of the Art in Europe, Japan and USA, Annals of the CIRP, 46/2:715-724.
57. König, W., Schroder, B., and Treffert, C., 1993, High Speed Grinding of Any Contour Using cBN Grinding Wheels, SME 5th Int. Grinding Conf.
58. König, W., Klocke, F., and Stuff, D., 1997, High Speed Grinding with cBN Wheels - Boundary Conditions, Applications and Prospects of a Future Oriented Technology, 1st French and German Conf. on High Speed Machining, Metz, June, 207-218.
59. Koshy, P., Iwasaki, A., and Elbestawi, M., 2003, Surface Generation with Engineered Diamond Wheels: Insights from Simulation, Annals of the CIRP, 52/1:271-274.
60. Koshy, P., Jain, V., and Lal, G., 1997, Grinding of Cemented Carbide with Electrical Spark Assistance, J. of Materials Processing Technology, 72:61-68.
61. Kovalenko, V., Golovko, L., Novikov, N., Shepelev, A., Sorochenko, V., 2003, Laser Technology Application For Diamond Tool Manufacturing, Proc. Int. Conf. Laser Technologies in Welding and Material Processing, Kiev, E.O. Paton Electric Welding Institute, NASU, 159-164.
62. Kramer, D., Rehsteiner, F., and Schumacher, B., 1999, ECD, a New Method for Grinding of Modern High Performance Cutting Materials to Highest Quality, Annals of theCIRP, 48/1:265-268
63. Krell, A., and Blank, P., 1995, Grain Size Dependence of Hardness in Dense Submicrometer Alumina, J. Am. Ceram. Soc. 78/4:1118-1120.
64. Krueger, M., Filed December 312002, Sulfur Impregnated Grinding Wheel, Cimcool, US Patent 6500220.
65. Kruth, J-P., 1998, Progress in Additive Manufacturing and Rapid Prototyping, Annals of the CIRP, 47/2:525-540.
66. Maekawa, K., Yokoyama, Y., and Ohshima, I., 1999, Fabrication of Metal-Bonded Grinding/Polishing Tools by the Greentape Laser Sintering Method, 3rd Int. Conf. On Abrasive Technology, Brisbane, Australia.
67. Malkin.S., Augusts 2003, Grinding Wheel System, US Patent 6,602,109.
68. Malkin, S., 1985, Current Trends in cBN Grinding Technology. Annals of the CIRP 34/2:557-563
69. Minke, E., 1999, Investigation on Grinding Potential and Wear Resistance of TG-Grinding Wheels, Internal Report for Saint-Gobain by IWT Bremen.
70. Mizuno, M., 2003, Contact-Discharge Truing/Dressing Method and Device Therefore, Japan Science Technology Corporation, European Patent 1306164A1.
71. Nakai, M., Ogawa, H., Yamanaka, M., Urakawa, N., and Miyake, M., 2000, Development of a Fixed Diamond Wire Saw for Electronics Applications, Advances in Abrasive Technology III, Soc. of Grinding Engineers, Japan, 233-240.
72. Nakano, S., Akaishi, M., Sasaki, T., and Yamaoka, S. 1994, Chem. Materials 6/2246.
73. Okumiya, M., Tsunekawa, Y., Saida, T., and Ichino, R.I, 2001, Creation of High Strength Bonded Abrasive Wheel with Ultrasonic Aided Composite Plating, Surface and Coatings Technology, Frontiers of Surface Engineering, 169-170, 1/3:112-115.
74. Oliveira, J. F., Souza, G., and Bianchi, E., 1995, Resin Bond cBN Wheels Wear Analysis Through the Chip Geometry, 1st Int. Machining and Grinding Conf., SME, Michigan.
75. Pritchard, P., Filed February 21 2001, Abrasive Articles with Optimally Oriented Abrasive Particles, 3M Company, US Patent 200300009949.
76. Prusak, Z., and Webster, J., 1995, Preparation of Hybrid cBN/Seeded Gel Wheels for Precision Grinding. 1st Int. Machining and Grinding Conf. SME, Michigan.
77. Raghunath, V., and Radhakrishnan, V., 1993, Performance Evaluation of a New Crankshaft Grinding Wheel, SME 5th Int. Grinding Conf., Ohio.
78. Rajurkar, K. P., Wei, B., Kozak, J., and Nooka, S., 1995, Abrasive Electrodischarge Grinding of Advanced Materials, Proc. XI Int. Symposium for Electromachining.
79. Ramanath, S., 2003, Porous Abrasive Tool and Method for Making the Same, Saint Gobain, US Patent 20030097800 A1.
80. Renaud, W., Hitchiner, M., 1995, The Development of Camshaft Lobe Grinding with Vitrified cBN. 1st Int. Machining and Grinding Conf., SME, Michigan.
81. Roquefeuil, F., 2001, A New Electrofused Aluminum Oxynitride Abrasive Grain for Precision Grinding Operations, Gorham Conf. on Precision Grinding and Finishing in the Global Economy, Chicago.
82. Rossetti, G., Fox, S., and Tricard, M., 2000, Bonded Abrasive Articles Filled with Oil/Wax Mixture, Norton Company, US Patent 6086648.
83. Rue, C., 1993, Sintered Sol Gel Alumina Abrasive Filaments, Norton Company, US Patent 5, 194, 072.
84. Rue, C., 1993, Sintered Sol Gel Alumina Abrasive Filaments, Norton Company, US Patent 5,244,477.
85. Salmon, S., 2003, The Effects of Hard Lubricant Coatings on the Performance of Electroplated Superabrasive Wheels, Int. Grinding Conf., SME.
86. Schmid, F., Khatak, C., Smith, M., and Lynch, L., 1982, Recent Developments in Multi-Wire Fixed Abrasive Slicing Technique (FAST), 4th E.C. Photovoltaic Solar Energy Conf., 980-984, D. Reidel Publishing Company.
87. Schopf, M., 2001, ECDM Conditioning of Metal Bonded Diamond Grinding Wheels, Annals of the CIRP, 50/1:125-128
88. Sexton, J., and Stone, B., 1981, The Development of an Ultrahard Abrasive Grinding Wheel which Suppresses Chatter, Annals of the CIRP, 30/1:215-218.
89. Shaji, 2003, Solid Lubricant Impregnated Wheel, Int. Journal of Machine Tool Manufacture, 43:965-972.
90. Sheldon, D., 1996, Sol-Gel Alumina Abrasive Grinding Wheel with Improved Corner Holding, Norton Company, US Patent 5573561.
91. Shi, Z., and Malkin, S., 2003, An Investigation of Grinding with Electroplated CBN Wheels, Annals of the CIRP, 52/1:267-270.
92. Shin, Y., 2003, A Novel Laser-Assisted Dressing Technique for Vitrified Superabrasive Wheels, Int. Grinding Conf., SME, Itasca.
93. Shu, K. M., 2003, Study of Electrical Discharge Grinding using Metal Matrix Composite Electrodes, Int. Journal of Machine Tools and Manufacture, 43:845-854.
94. Song, G., 1994, A Study of the Grinding Wheel Structure Improvement to Suppress Chatter, PhD thesis, Univ. of Connecticut.
95. Song, Y. A. and König, W., 1997, Experimental Study of the Basic Process Mechanism for Direct Selective Laser Sintering of Low Melting Point Metallic Powder, Annals of the CIRP, 46/1:127-130.
96. Spur, G., and Lachmund, U., 1993, Type-Specific Applicability of Polycrystalline Diamond. Research and Development in Germany, Hanser, Annals of the German Academic Society for Production Engineering.
97. Shrivastava, S., Rajurkar, K., and Zhao, W., 1999, Rotary Electrodischarge Machining of Polycrystalline Diamond, Trans. of NAMRI, 27:141-146.
98. Stabenow, R., Bruhn, J. and Golla, B., 2003, Microcrystalline Sintered Ceramics in Bonded Abrasives - Exploiting New Potential.
99. Stephenson, D., Hedge, J., and Corbett, J., 2002, Surface Finishing of Ni-Cr-B-Si Composite Coatings by Precision Grinding, Int. Journal of Machine Tools and Manufacture, 42:357-363.
100. Stephenson, D., Jin, T., and Corbett, J., 2002, High Efficiency Deep Grinding of a Low Alloy Steel with Plated cBN Wheels, Annals of the CIRP, 51/1:241-244.
101. Stoetzel, W., and Provow, R., 2003, Abrasive Articles Having Bond Systems Containing Abrasive Particles, 3M Company, European Patent 01159109.
102. Stöhr, R., and Heinzel, C., 2002, Grind-hardening with CBN, Abrasives Magazine, June-July, 22-30.
103. Subramanian, K., and Lindsay, R., 1992, A Systems Approach for the Use of Vitrified Bonded Superabrasive Wheels for Precision Production Grinding, ASME J. of Engineering for Industry, 114:41-52.
104. Subramanian, K., Ramanath, S., and Tricard, M., 1997, Mechanisms of Material Removal in the Precision Production Grinding of Ceramics, J. of Manufacturing Science and Engineering, 119:509-514.
105. Subramanian, K., 1999, Measurement and Analysis of Grinding Processes, Abrasives Magazine, April/May.
106. Sunarto, and Ichida, Y., 1999, Grinding Performance of Newly Developed Polycrystalline cBN Abrasives having an Ultrafine Crystal Structure, 3rd Int. Conf. On Abrasive Technology, Brisbane, Australia.
107. Suto, T., Waida, T., Noguchi, H., and Inoue, H., 1990, High Performance Creep Feed Grinding of Difficult to Grind Materials with New Slotted Wheel, JSPE, 24/1:39-44.
108. Tang, J., Pu, X., Xu, H., and Zhang, Y., 1990, Studies on Mechanisms and Improvement of Workpiece Burn During Grinding of Titanium Alloys, Annals of the CIRP, 39/1:353-356.
109. Tawakoli, T., 1993, High Efficiency Deep Grinding, VDI-Verlag GmbH - Mechanical Engineering Publications Limited.
110. Tawakoli, T., 1993, T-Tool - The New Superabrasives Tool System for Grinding and Dressing, SME, 5th International Grinding Conf.
111. Tonshoff, H. K., and Heuer, W., Evaluation of the Workpiece Surface Integrity After Grinding with SG and Conventional Abrasives. Abschlussbericht.
112. Tonshoff, H., and Friemuth, T., 1999, The Cutting Tool Performance depends on the Tool Grinding Process, SME 3rd Int. Machining and Grinding Conf.
113. Tonshoff, H. K., and Friemuth, T., and Becker, J-C, 2000, Continuous Path Controlled Grinding of Crankshafts, Abrasives Magazine, Dec./Jan.
114. Tricard, M., Kassir, S., Herron, P., and Pei, Z., 1998, New Abrasives Trends in Manufacturing of Silicon Wafers, 13th Annual Meeting of the ASPE, 631-634, October.
115. Varghese, B., and Malkin, S., 2000, Development of a Sensor Integrated 'Intelligent' Grinding Wheel for In-Process Monitoring, Annals of the CIRP, 49/1:231-234.
116. Wakuda, M, Inasaki, I., Ogawa, K., and Takahara, M., 1993, Monitoring of the grinding Process with an AE Sensor Integrated cBN Wheel, Journal of Advanced Automation Technology, 5/4:179-184.
117. Warnecke, G., and Barth, C., 1999, Optimization of the Dynamic Behavior of Grinding Wheels for Grinding of Hard and Brittle Materials Using the Finite Element Method, Annals of the CIRP, 48/1:261-264.
118. Weinert, K., and Finke, M., 2002, Bohrungsbearbeitung in einem Uberschliff durch Innenrund-Langsschleifen, 60. Jahrbuch Schleifen, Honen, Lappen und Polieren, Vulkan-Verlag, Essen,:129-141.
119. Wentorf, R. H. Jr., 1957, Cubic Form of Boron Nitride, The Journal of Chemical Physics, 26/4:956.
120. Wentorf, R. H., 1961, The Synthesis of the Cubic Form of Boron Nitride?, The Journal of Chemical Physics, 34/3:809-812.
121. Werner, G., and Tawakoli, T., 1988, Advances in High Efficiency Deep Grinding, SME 3rd Int. Grinding Conf., MR88-588.
122. Wu, M., 1998, Method for Making High Permeability Grinding Wheels, Norton Company, US Patent 5,738,696.
123. Zhao, Y., He, D., Qian, J., Daemen, L., Huang, J., Pantea, C., Zhang, J., Voronin, G., Zerda, T., 2003, Novel Superhard Materials to Rival Diamond, Intertech, Vancouver.
124. Zimmermann, and M., Einset, E., 2003, Low Oxygen Cubic Boron Nitride and Its Production, GE Company, World Patent 03040062.