Industrial challenges in grinding

CIRP Annals - Manufacturing Technology

Volumn 58, Issue 2, 2009, Pages 663-680

  Oliveira, J F G ^a   Silva, E J ^b   Guo, C ^c   Hashimoto, F ^d  

^a Instituto de Pesquisas Tecnologicas   (Brazil)

^b UNIVERSITY OF SÃO PAULO   (Brazil)

^c UNITED TECHNOLOGIES RESEARCH CENTER   (United States)

^d TIMKEN COMPANY   (United States)

Author keywords

Grinding; Industry; Optimization

Indexed keywords

AUTOMOTIVE APPLICATIONS; DRIVING FORCES; GRINDING; GRINDING PERFORMANCE; INDUSTRIAL CHALLENGES; INDUSTRIAL DEMANDS; INDUSTRIAL USE; MACHINE TOOL BUILDERS; RESEARCH CENTER; RESEARCH CHALLENGES;

GRINDING (COMMINUTION); GRINDING (MACHINING); INDUSTRIAL APPLICATIONS; INDUSTRY; MACHINE TOOLS;

RESEARCH;

EID: 70449522986     PISSN: 00078506     EISSN: 17260604     Source Type: Journal    
DOI: 10.1016/j.cirp.2009.09.006     Document Type: Article

References (70)

1. Arunachalam N., and Ramamoorthy B. Texture Analysis for Grinding Wheel Wear Assessment using Machine Vision. Proceedings of IMechE Part B: Journal of Engineering Manufacture 221 (2007) 419-430
2. Alden G.I. Operation of Grinding Wheels in Machine Grinding. ASME Paper 1446 (1914) 451-460
3. Biermann D., Weinert K., Marschalkowski K., and Stuckenholz B. Einschichtig belegte, galvanisch gebundene CBN-Schleifscheiben-Potenziale nutzen durch Innenrund-Schälschleifen. IDR Industrie Diamanten Rundschau 41-III (2007) 50-53
4. Blum T., and Dornfeld D.A. Grinding Process Feedback using Acoustic Emission. 4th International Grinding Conference And Exposition. Dearborn, Michigan, Society of Manufacturing Engineering (1993) 1-42
5. Brinksmeier E., Aurich J.C., Govekar E., Heinzel C., Hoffmeister H.-W., Klocke F., Peters J., Rentsch R., Stephenson D.J., Uhlmann E., Weinert K., and Wittmann M. Advances in Modeling and Simulation of Grinding Processes. Annals of the CIRP 55 2 (2006) 667-696
6. Brinksmeier E., and Werner F. Monitoring of Grinding Wheel Wear. Annals of the CIRP 34/1 (1992) 373-376
7. Byrne G., Dornfeld D., Inasaki I., Ketteler G., König W., and Teti R. Tool Condition Monitoring (TCM) - The Status of Research and Industrial Application. Annals of the CIRP 44 2 (1995) 541-567
8. Chattopadhyay A.K., Chollet L., and Hintermann H.E. On Performance of Chemically Bonded Single-Layer CBN Grinding Wheel. Annals of the CIRP 39 1 (1990) 309-312
9. Chattopadhyay A.K., and Hintermann H.E. On the Performance of Brazed Single-Layer CBN Wheel. Annals of the CIRP 43 1 (1994) 313-317
10. Comley P., Walton I., Jin T., and Stephenson D.J. A High Material Removal Rate Grinding Process for the Production of Automotive Crankshafts. Annals of the CIRP 55 1 (2006) 347-350
11. Czenkusch C. Technologische Untersuchungen und Prozessmodelle beim Rundschleifen, VDI-Fortschrittberichte, Reihe 2: Fertigungstechnik, Nr. 372 (1996), VDIVerlag, Düsseldorf
12. Dornfeld D.A., and Cai H.G. An Investigation of Grinding and Wheel Loading using Acoustic Emission. Journal of Engineering for Industry 106 (1984) 28-33
13. Ebbrell S (2003) Process Requirements for Precision Grinding. Ph.D. Thesis, Liverpool John Moores University, UK.
14. Ebbrell S., Woolley N.H., Tridimas Y.D., Allanson D.R., and Rowe W.B. The Effects of Cutting Fluid Application Methods on the Grinding Process. International Journal of Machine Tools and Manufacture 40 2 (2000) 209-223
15. Gallego I. Intelligent Centerless Grinding: Global Solution for Process Instabilities and Optimal Cycle Design. Annals of the CIRP 56 1 (2007) 347-352
16. Guest J.J. Grinding Machinery (1915), Edward Arnold
17. Guo C., Campomanes M., McIntosh D., Becze C., and Malkin S. Model-Based Monitoring and Control of Continuous Dress Creep-Feed Form Grinding. Annals of the CIRP 53 1 (2004) 263-266
18. Guo C., Campomanes M., McIntosh D., Becze C., Green T., and Malkin S. Optimization of Continuous Dress Creep-Feed Form Grinding Process. Annals of the CIRP 52 1 (2003) 259-262
19. Guo C., Ranganath S., Elfizy A., and McIntosh D. Virtual High Performance Grinding with CBN Wheels. Annals of the CIRP 57 1 (2008) 325-328
20. Guo C., Shi Z., Attia H., and McIntosh D. Power and Wheel Wear for Grinding Nickel Alloy with Plated CBN Wheels. Annals of the CIRP 56 1 (2007) 343-346
21. Hahn R.S. On the Mechanics of the Grinding Process under Plunge Cut Conditions. Transactions of the ASME (1966) 72-80
22. Hegener G. Technologische Grundlagen des Hochleistungs-Aussenrund-Formschleifen, Dissertation (1999), Shaker Verlag, WZL, Aachen p. 147
23. Huynh V.M., and Fan Y. Surface-texture Measurement and Characterization with Applications to Machine-Tool Monitoring. International Journal of Advanced Manufacturing Technology 7 (1992) 2-10
24. Inasaki I., and Okamura K. Monitoring of Dressing and Grinding Process with Acoustic Emission. Annals of the CIRP 34 1 (1989) 277-280
25. Jackson M.J., Davis C.J., Hitchiner M.P., and Mills B. High-Speed Grinding with CBN Grinding Wheels. Journal of Materials Processing Technology 110 (2001) 78-88
26. Jansen T. Bohrungsbearbeitung hochharter faserverstärkter Keramik mit Schleifstiften. In: Weinert K. (Ed). Spanende Fertigung vol. 4 (2005), Vulkan, Essen 156-162
27. Jansen T. Machining aspects for the drilling of C/C-SiC materials. In: Krenkel W. (Ed). Ceramic Matrix Composites (2008), Wiley-VCH, Weinheim 287-301
28. Kaliszer H., and Trmal G. Mechanics of Grinding Fluid Delivery. SME paper MR75-614 (1975) 1-16
29. Karpuschewski B., Knoche H.-J., and Hipke M. Gear Finishing by Abrasive Processes. Annals of the CIRP 57 2 (2008) 621-640
30. Keeg R.L. Industrial Problem in Grinding. Annals of the CIRP 32 2 (1983) 559-561
31. Klocke F., and König W. Appropriate Conditioning Strategies Increase the Performance Capabilities of Vitrified-Bond CBN Grinding Wheels. Annals of the CIRP 44 1 (1995) 305-310
32. König W., and Klocke F. Schleifen mit Schleifscheiben. In: König W., and Klocke F. (Eds). Fertigungsverfahren Band 2, Schleifen, Honen, Läppen, 3 (1996), VDI Verlag, Düsseldorf 62-198
33. König W., and Kumplen T. Process Monitoring in Grinding, Dressing and Sharpening Process. Production Engineering l l (1993) 27-30
34. König W, Meyen HP (1990) AE in Grinding and Dressing: Accuracy And Process Reliability. SME Technical Paper, MR 90-526:1-20.
35. Krenkel W. Applications of Fiber Reinforced C/C-SiC Ceramics. CFI Ceramic Forum International 80 8 (2003) 31-38
36. Kumar V., and Sutherland J.W. Sustainability of the Automotive Recycling Infrastructure: Review of Current Research and Identification of Future Challenges. International Journal of Sustainable Manufacturing 1 1-2 (2008) 145-167
37. 2 Emissions Oil & Gas Science and Technology-Rev. IFP 58 1 (2003) 115-127
38. Lee J.M., Shen C.H., and Wasserbaech E. Camshaft Grinding using Coated Abrasives Belts. Transactions of NAMRI/SME 21 (1993) 215-222
39. Malkin S., and Guo C. Grinding Technology: Theory and Applications of Machining with Abrasives (2008), Industrial Press, New York pp. 1-375
40. Nakayama K. Taper Print Method for the Measurement of Grinding Wheel Surface. Bulletin of the Japan Society of Precision Engineering 7 2 (1973) 59-60
41. Oliveira J.F.G., Coelho R.T., and Neto C.K. Development of an Optical Scanner to Study Wear on the Working Surface of Grinding Wheels. Machining Science and Technology 3 2 (1999) 239-253
42. Oliveira J.F.G., and Dornfeld D.A. Application of AE Contact Sensing in Reliable Grinding Monitoring. Annals of the CIRP 50 1 (2001) 217-220
43. Oliveira J.F.G., Dornfeld D.A., and Winter B. Dimensional Characterization of Grinding Wheel Through Acoustic Emission. Annals of the CIRP 43 1 (1994) 291-294
44. Oliveira J.F.G., Franca T.V., and Wang J.P. Experimental Analysis of Wheel/Workpiece Dynamic Interactions in Grinding. Annals of the CIRP 57 1 (2008) 329-332
45. Oliveira J.F.G., Purquerio B.M., Coelho R.T., and Bianchi E.C. Grinding Process Dominance by Means of the Dressing Operation. lnternational Matador (Machine Tool Design Research) Conference, 29. Manchester (1992) 547-550
46. Oliveira J.F.G., Silva E.J., Gomes J.J.F., Klocke F., and Friedrich D. Analysis of Grinding Strategies Applied to Crankshaft Manufacturing. Annals of the CIRP 54 1 (2005) 269-272
47. Performance, Mahle Costumer Magazine, 2006, 2:1-23. Available from: URL: http://www.mahle.com/C125713200619F8F/vwContentByUNID/4A79F4A3B17919B4C12571DB0026CBBF/$FILE/Performance_2-2006_en.pdf.
48. Performance, Mahle Costumer Magazine, 2007, 1:1-23. Available from: URL: http://www.mahle.com/C125713200619F8F/vwContentByUNID/B09C71F862585B71C12572F90041EAA6/$FILE/Performance_0107_en.pdf.
49. Peters J. Contribution of CIRP Research to Industrial Problem in Grinding. Annals of the CIRP 33 2 (1984) 451-468
50. Rollmann J., Spintig W., and Stakemeier B. Slip Free Scan Hardening-A Process for Complete Inductive Surface Hardening of Slewing Bearing Raceways. Thyssenkrupp Techforum 1 (2007) 51-55
51. SGL Carbon Group (2003) SIGRASIC Bullet Proof Ceramics, Company Brochure, Meitingen, Germany.
52. Shaw M.C. Energy Conversion in Cutting and Grinding. Annals of the CIRP 45 1 (1996) 101-104
53. Sheldon D., and Liu S. Innovative Bond Technology for Corner/Form Holding. Automotive Manufacturing International (1995) 1-3
54. Shi Z., and Malkin S. An Investigation of Grinding with Electroplated CBN Wheels. Annals of the CIRP 52 1 (2006) 267-270
55. Shi Z., and Malkin S. Wear of Electroplated CBN Wheels. ASME Journal of Manufacturing Science and Engineering 128 (2006) 110-118
56. Subramanian K (2008) Abrasive Finishing Processes, Systems and Solutions: State-of-the Art and Emerging Needs. SME Technical Paper # TP08PUB 113:1-15.
57. Subramanian K., and Lindsay R.P. A System Approach for the Use of Vitrified Bonded Super Abrasive Wheels for Precision Production Grinding. Journal of Engineering for Industry-Transactions of the ASME 114 (1992) 41-52
58. Suto T., Waida T., and Sata T. In-process Measurement of Wheel Surface in Grinding Operations. Proceedings of The Tenth International Machine Tool Design and Research Conference. Manchester (1969) 171-180
59. Tobias S.A. Machine Tool Vibration (1965), Blackie and Son Ltd.
60. Tonshoff H.K., Wobker H.G., and Werner F. Analysis of Wheel Waviness and Grain Wear in Grinding. Transactions of NAMRIISME XXI (1993) 145-149
61. Upadhyaya R.P., and Malkin S. Thermal Aspects of Grinding with Electroplated CBN Wheels. ASME-Journal of Manufacturing Science and Engineering 126 (2004) 107-114
62. Verkerk J. Final Report Concerning CIRP Cooperative Work on the Characterization of Grinding Wheel Topography. Annals of the CIRP 26 2 (1977) 385-395
63. Wakuda M., and Inasaki I. Detection of Malfunctions in Grinding. 1st International Conference on Acoustic Emission in Manufacturing (1991) 494-501
64. Webster J., Marinescu I., Bennett R., and Lindsay R. Acoustic Emission for Process Control and Monitoring of Surface Integrity during Grinding. Annals of the CIRP 43 1 (1994) 299-304
65. Webster J., and Tricard M. Innovations in Abrasive Products for Precision Grinding. Annals of the CIRP 53 2 (2004) 597-617
66. Webster JA (1990) Design of a 250 m/s CBN Grinding Machine. SME Technical Paper TP90PUB748.
67. Weinert K, Jansen T (2005) Faserverstärkte Keramiken-Einsatzverhalten bei der Bohrungsfertigung in C/C-SiC, Cfi ceramic forum international/Berichte der Deutschen Keramischen Gesellschaft, 82/13, Sonderausgabe 2005, Hrsg. Krenkel, W., ISSN 01739913, Göller Verlag, Baden Baden, pp. 34-39.
68. Weinert K., Marschalkowski K., and Kötter D. Innenrund-Schälschleifen mit CBNScheiben. Schnittfreudigkeit und feine Oberflächen-nur scheinbar ein Widerspruch. MM Maschinenmarkt 112 31 (2006) 20-22
69. Weinert K., Marschalkowski K., and Kötter D. Zerspanleistung steigern ohne Qualitätsverlust-Größeres Zeitspanvolumen beim Innenrund-Schälschleifen durch galvanisch gebundene CBN-Schleifscheiben. MM Maschinenmarkt 112 34 (2006) 24-26
70. Whitehouse D.J. Surface Metrology Instrumentation. Journal of Physics. E: Scientific Instruments 20 (1987) 1145-1155