Mathematical modeling and verification of pulse electrochemical micromachining of microtools

International Journal of Advanced Manufacturing Technology

Volumn 68, Issue 5-8, 2013, Pages 1055-1061

  Kamaraj, Abishek B ^a   Sundaram, M M ^a  

^a University of Cincinnati   (United States)

Author keywords

Electrochemical machining; Mathematical model; Micromachining; Microtool fabrication; Tungsten

Indexed keywords

CONDUCTIVE MATERIALS; ELECTROCHEMICAL CUTTING; FORECASTING; MATHEMATICAL MODELS; TOOLS; TUNGSTEN;

ELECTRICALLY CONDUCTIVE; ELECTROCHEMICAL MACHINING; ELECTROCHEMICAL MICRO-MACHINING; EXPERIMENTAL VERIFICATION; MANUFACTURING METHODS; MICRO-ELECTROCHEMICAL MACHINING; MICRO-TOOL; MODELING AND VERIFICATIONS;

MICROMACHINING;

EID: 84888337659     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-013-4896-y     Document Type: Article

References (36)

1. Schuster R, Kirchner V, Allongue P, Ertl G (2000) Electrochemical micromachining. Science 289(5476):98-101. doi: 10.1126/science.289.5476.98
2. McGeough JA (1974) Principles of electrochemical machining. Chapman and Hall, London
3. Bo Hyun K, Shi Hyoung R, Deok Ki C, Chong Nam C (2005) Micro electrochemical milling. J Micromech Microeng 15(1):124
4. Mithu M, Fantoni G, Ciampi J (2011) The effect of high frequency and duty cycle in electrochemical microdrilling. Int J Adv Manuf Technol 55(9):921-933. doi: 10.1007/s00170-010-3123-3
5. Kim BH, Na CW, Lee YS, Choi DK, Chu CN (2005) Micro electrochemical machining of 3D micro structure using dilute sulfuric acid. CIRP Ann Manuf Technol 54(1):191-194. doi: 10.1016/s0007-8506(07)60081-x
6. Mathew R, James S, Sundaram MM (2010) Experimental study of micro tools fabricated by electrochemical machining. ASME Conf Proc 2010(49460):73-80
7. Dabholkar A, Sundaram MM (2012) Study of micro-abrasive tool-making by pulse plating using Taguchi method. Mater Manuf Process 27(11):1233-1238. doi: 10.1080/10426914.2012.663143
8. Ghoshal B, Bhattacharyya B (2013) Influence of vibration on micro-tool fabrication by electrochemical machining. Int J Mach Tool Manuf 64:49-59. doi: 10.1016/j.ijmachtools.2012.07.014
9. Liu Y, Zhu D, Zeng Y, Yu H (2010) Development of microelectrodes for electrochemical micromachining. Int J Adv Manuf Technol 55(1-4):195-203. doi: 10.1007/s00170-010-3035-2
10. Fan Z-W, Hourng L-W, Wang C-Y (2010) Fabrication of tungsten microelectrodes using pulsed electrochemical machining. Precis Eng 34(3):489-496. doi: 10.1016/j.precisioneng.2010.01.001
11. Mathew R, Sundaram MM (2012) Modeling and fabrication of micro tools by pulsed electrochemical machining. J Mater Process Technol 212(7):1567-1572. doi: 10.1016/j.jmatprotec.2012.03.004
12. Kamaraj AB, Sundaram MM, Mathew R (2013) Ultra high aspect ratio penetrating metal microelectrodes for biomedical applications. Microsyst Technol 19(2):179-186. doi: 10.1007/s00542-012-1653-3
13. Guo S, Guo ZN, Luo HP, Gu WC (2011) Experimental research of electrochemical mechanical polishing (ECMP) for micro tool electrode. Adv Mater Res 314-316:1846-1850. doi: 10.4028/www.scientific.net/AMR.314-316.1846
14. Rajurkar KP, Wei B, Kozak J, McGeough JA (1995) Modelling and monitoring interelectrode gap in pulse electrochemical machining. CIRP Ann Manuf Technol 44(1):177-180. doi: 10.1016/s0007-8506(07)62301-4
15. Kozak J, Rajurkar K, Makkar Y (2004) Selected problems of micro-electrochemical machining. J Mater Process Technol 149(1-3):426-431. doi: 10.1016/j.jmatprotec.2004.02.031
16. Rajurkar KP, Levy G, Malshe A, Sundaram MM, McGeough J, Hu X, Resnick R, DeSilva A (2006) Micro and nano machining by electro-physical and chemical processes. CIRP Ann Manuf Technol 55(2):643-666. doi: 10.1016/j.cirp.2006.10.002
17. Kozak J (1998) Mathematical models for computer simulation of electrochemical machining processes. J Mater Process Technol 76(Compendex):170-175
18. Kozak J, Rajurkar KP, Wei B (1994) Modelling and analysis of pulse electrochemical machining (PECM). J Eng Ind 116(3):316-323
19. Kozak J, Dabrowski L, Osman H, Rajurkar KP (1991) Computer modelling of electrochemical machining with rotating electrode. J Mater Process Technol 28(1-2):159-167. doi: 10.1016/0924-0136(91)90215-z
20. Sarkar S, Mitra S, Bhattacharyya B (2004) Mathematical modeling for controlled electrochemical deburring (ECD). J Mater Process Technol 147(2):241-246
21. Ma N, Xu W, Wang X, Tao B (2010) Pulse electrochemical finishing: modeling and experiment. J Mater Process Technol 210(6-7):852-857. doi: 10.1016/j.jmatprotec.2010.01.016
22. Volgin V, Davydov A (2012) Mass-transfer problems in the electrochemical systems. Russ J Electrochem 48(6):565-569. doi: 10.1134/s1023193512060146
23. Minazetdinov NM (2009) A hydrodynamic interpretation of a problem in the theory of the dimensional electrochemical machining of metals. J Appl Math Mech 73(1):41-47. doi: 10.1016/j.jappmathmech.2009.03.009
24. Minazetdinov NM (2009) A scheme for the electrochemical machining of metals by a cathode tool with a curvilinear part of the boundary. J Appl Math Mech 73(5):592-598. doi: 10.1016/j.jappmathmech.2009.11.012
25. Zhiyong L, Zongwei N (2007) Convergence analysis of the numerical solution for cathode design of aero-engine blades in electrochemical machining. Chin J Aeronaut 20(6):570-576. doi: 10.1016/s1000-9361(07)60084-3
26. Zhu D, Wang K, Qu NS (2007) Micro wire electrochemical cutting by using in situ fabricated wire electrode. CIRP Ann Manuf Technol 56(1):241-244. doi: 10.1016/j.cirp.2007.05.057
27. Wu J, Wang H, Chen X, Cheng P, Ding G, Zhao X, Huang Y (2012) Study of a novel cathode tool structure for improving heat removal in electrochemical micro-machining. Electrochim Acta 75:94-100. doi: 10.1016/j.electacta.2012.04. 078
28. Deconinck D, Van Damme S, Deconinck J (2012) A temperature dependent multi-ion model for time accurate numerical simulation of the electrochemical machining process. Part I: theoretical basis. Electrochim Acta 60:321-328. doi: 10.1016/j.electacta.2011.11.070
29. Deconinck D, Damme SV, Deconinck J (2012) A temperature dependent multi-ion model for time accurate numerical simulation of the electrochemical machining process. Part II: numerical simulation. Electrochim Acta 69:120-127. doi: 10.1016/j.electacta.2012.02.079
30. Rajurkar KP, Kozak J, Wei B, McGeough JA (1993) Study of pulse electrochemical machining characteristics. CIRP Ann Manuf Technol 42(1):231-234. doi: 10.1016/s0007-8506(07)62432-9
31. Loutrel SP, Cook NH (1973) A theoretical model for high rate electrochemical machining. J Eng Ind 95(4):1003-1008
32. Wei B (1994) Modeling and analysis of pulse electrochemical machining. University of Nebraska-Lincoln, Lincoln
33. Kozak J (2004) Thermal models of pulse electrochemical machining. Bull Pol Acad Sci Chem 52(4):313-320
34. Balsamy Kamaraj A, Dyer R, Sundaram MM (2012) Pulse electrochemical micromachining of tungsten carbide. In: ASME 2012 International Manufacturing Science and Engineering Conference (MSEC2012), University of Notre Dame, Notre Dame, IN, USA
35. Zhang Y (2010) Investigation into current efficiency for pulse electrochemical machining of nickel alloy. Thesis, University of Nebraska-Lincoln, Lincoln
36. Pourbaix M (1974) Atlas of electrochemical equilibria in aqueous solutions. NACE, Houston, p 644