Thermosensitive Polymers for Controlled Delivery of Hormones

Studies in Mechanobiology, Tissue Engineering and Biomaterials

Volumn 8, Issue , 2011, Pages 457-479

  Tang, Yu ^a   Oak, Mayura ^b   Mandke, Rhishikesh ^b   Layek, Buddhadev ^b   Sharma, Gitanjali ^b   Singh, Jagdish ^b  

^a NOVARTIS INSTITUTES FOR BIOMEDICAL RESEARCH   (United States)

^b NORTH DAKOTA STATE UNIVERSITY   (United States)

Author keywords

Atomic Transfer Radical Polymerization; Lower Critical Solution Temperature; Matrix Assist Laser Desorption Ionization; Poly Lactic Acid

Indexed keywords

EID: 84887608746     PISSN: 18682006     EISSN: 18682014     Source Type: Book Series    
DOI: 10.1007/8415_2011_65     Document Type: Chapter

References (81)

1. Agrawal, A.K., Gupta, P.N., Khanna, A., Sharma, R.K., Chandrawanshi, H.K., Gupta, N., Patil, U.K., Yadav, S.K.: Development and characterization of in situ gel system for nasal insulin delivery. Pharmazie 65(3), 188–193 (2010)
2. Alexandridis, P., Holzwarth, J.F., Hatton, T.A.: Micellization of Poly(ethylene oxide)-Poly(propylene oxide)-Poly(ethylene oxide) triblock copolymers in aqueous solutions: thermodynamics of copolymer association. Macromolecules 27(9), 2414–2425 (1994)
3. Al-Tahami, K., Singh, J.: Smart polymer based delivery systems for peptides and proteins. Recent Pat. Drug Deliv. Formul. 1(1), 65–71 (2007)
4. Barichello, J.M., Morishita, M., Takayama, K., Nagai, T.: Absorption of insulin from pluronic F-127 gels following subcutaneous administration in rats. Int. J. Pharm. 184(2), 189–198 (1999)
5. Basu Ray, G., Chakraborty, I., Moulik, S.P.: Pyrene absorption can be a convenient method for probing critical micellar concentration (cmc) and indexing micellar polarity. J. Colloid Interface Sci. 294(1), 248–254 (2006)
6. Behravesh, E., Shung, A.K., Jo, S., Mikos, A.G.: Synthesis and characterization of triblock copolymers of methoxy poly(ethylene glycol) and poly(propylene fumarate). Biomacromolecules 3(1), 153–158 (2002)
7. Bochot, A., Fattal, E., Gulik, A., Couarraze, G., Couvreur, P.: Liposomes dispersed within a thermosensitive gel: a new dosage form for ocular delivery of oligonucleotides. Pharm. Res. 15(9), 1364–1369 (1998)
8. Buwalda, S.J., Dijkstra, P.J., Calucci, L., Forte, C., Feijen, J.: Influence of amide versus ester linkages on the properties of eight-armed PEG–PLA star block copolymer hydrogels. Biomacromolecules 11(1), 224–232 (2010)
9. Charman, S.A., Mason, K.L., Charman, W.N.: Techniques for assessing the effects of pharmaceutical excipients on the aggregation of porcine growth hormone. Pharm. Res. 10(7), 954–962 (1993)
10. Chen-CHow, P., Frank, S.G.: Comparison of lidocaine release from Pluronic F-127 gels and other formulations. Acta Pharm. Suec 18(4), 239–244 (1981)
11. Chen, S., Pederson, D., Oak, M., Singh, J.: In vivo absorption of steroidal hormones from smart polymer based delivery systems. J. Pharm. Sci. 99(8), 3381–3388 (2010)
12. Chen, S., Pieper, R., Webster, D.C., Singh, J.: Triblock copolymers: synthesis, characterization, and delivery of a model protein. Int. J. Pharm. 288(2), 207–218 (2005)
13. Chen, S., Singh, J.: Controlled delivery of testosterone from smart polymer solution based systems: in vitro evaluation. Int. J. Pharm. 295(1–2), 183–190 (2005)
14. Chen, S., Singh, J.: In vitro release of levonorgestrel from phase sensitive and thermosensitive smart polymer delivery systems. Pharm. Dev. Technol. 10(2), 319–325 (2005)
15. Chen, S., Singh, J.: Controlled release of growth hormone from thermosensitive triblock copolymer systems: In vitro and in vivo evaluation. Int. J. Pharm. 352(1–2), 58–65 (2008)
16. Cho, H., Chung, D., Jeongho, A.: Poly(D, L-lactide-ran-epsilon-caprolactone)-poly(ethylene glycol)-poly(D,L-lactide-ran-epsilon-caprolactone) as parenteral drug-delivery systems. Biomaterials 25(17), 3733–3742 (2004)
17. Cho, J.-K., Hong, K.-Y., Park, J.W., Yang, H., Song, S.-C.: Injectable delivery system of 2-methoxyestradiol for breast cancer therapy using biodegradable thermosensitive poly(organophosphazene) hydrogel. J. Drug Target (2010) (doi:10.3109/1061186X.2010. 499461)
18. Choi, S., Baudys, M., Kim, S.W.: Control of blood glucose by novel GLP-1 delivery using biodegradable triblock copolymer of PLGA–PEG–PLGA in type 2 diabetic rats. Pharm. Res. 21(5), 827–831 (2004)
19. Choi, S., Kim, S.W.: Controlled release of insulin from injectable biodegradable triblock copolymer depot in ZDF rats. Pharm. Res. 20(12), 2008–2010 (2003)
20. Cui, Z., Lee, B.H., Vernon, B.L.: New hydrolysis-dependent thermosensitive polymer for an injectable degradable system. Biomacromolecules 8(4), 1280–1286 (2007)
21. Dimitrov, I., Trzebicka, B., Müller, A.H., Dworak, A., Tsvetanov, C.B.: Thermosensitive water-soluble copolymers with doubly responsive reversibly interacting entities. Prog. Polym. Sci. 32(11), 1275–1343 (2007)
22. Du, J., Peng, Y., Zhang, T., Ding, X., Zheng, Z.: Study on pH-sensitive and thermosensitive polymer networks containing polyacetal segments. J. Appl. Polym. Sci. Symp. 83(14), 3002–3006 (2002)
23. Garbern, J.C., Hoffman, A.S., Stayton, P.S.: Injectable pH-and temperature-responsive Poly(N-isopropylacrylamide-co-propylacrylic acid) copolymers for delivery of angiogenic growth factors. Biomacromolecules 11(7), 1833–1839 (2010)
24. Gong, C., Shi, S., Dong, P., Kan, B., Gou, M., Wang, X., Li, X., Luo, F., Zhao, X., Wei, Y., Qian, Z.: Synthesis and characterization of PEG–PCL–PEG thermosensitive hydrogel. Int. J. Pharm. 365(1–2), 89–99 (2009)
25. Gümüsderelioglu, M., Müftüoglu, O., Gönen Karakeçili, A.: Biomodification of thermosensitive copolymer of ethylene glycol vinyl ether by RGD and insulin. React. Funct. Polym. 58(2), 149–156 (2004)
26. Hatefi, A., Amsden, B.: Biodegradable injectable in situ forming drug delivery systems. J. Control Release 80(1–3), 9–28 (2002)
27. Hu, D.S., Liu, H.: Structural analysis and degradation behavior in polyethylene glycol/poly(L-lactide) copolymers. J. Appl. Polym. Sci. Symp. 51(3), 473–482 (1994)
28. Hwang, M.J., Suh, J.M., Bae, Y.H., Kim, S.W., Jeong, B.: Caprolactonic poloxamer analog: PEG–PCL–PEG. Biomacromolecules 6(2), 885–890 (2005)
29. Ignatius, A.A., Claes, L.E.: In vitro biocompatibility of bioresorbable polymers: poly(L, DL-lactide) and poly(L-lactide-co-glycolide). Biomaterials 17(8), 831–839 (1996)
30. International Organization for Standardization. (2007) Biological evaluation of medical devices. Geneva, Switzerland. Test for local effects after implantation Part 6.
31. Jagtap, R.N., Ambre, A.H.: Overview literature on matrix assisted laser desorption ionization mass spectroscopy (MALDI MS): basics and its applications in characterizing polymeric materials. Bull Mater. Sci. 28(6), 515–528 (2005)
32. Jeong, B., Bae, Y.H., Lee, D.S., Kim, S.W.: Biodegradable block copolymers as injectable drug-delivery systems. Nature 388(6645), 860–862 (1997)
33. Jeong, B., Bae, Y.H., Kim, S.W.: Biodegradable thermosensitive micelles of PEG–PLGA– PEG triblock copolymers. Colloids Surf. B Biointerf. 16(1–4), 185–193 (1999)
34. Jeong, B., Bae, Y.H., Kim, S.W.: Thermoreversible gelation of PEG–PLGA–PEG triblock copolymer aqueous solutions. Macromolecules 32(21), 7064–7069 (1999)
35. Jeong, B., Kibbey, M.R., Birnbaum, J.C., Won, Y., Gutowska, A.: Thermogelling biodegradable polymers with hydrophilic backbones: PEG-g-PLGA. Macromolecules 33(22), 8317–8322 (2000)
36. Kim, Y.J., Choi, S., Koh, J.J., Lee, M., Ko, K.S., Kim, S.W.: Controlled release of insulin from injectable biodegradable triblock copolymer. Pharm. Res. 18(4), 548–550 (2001)
37. Kim, M.S., Hyun, H., Seo, K.S., Cho, Y.H., Won Lee, J., Rae Lee, C., Khang, G., Lee, H.B.: Preparation and characterization of MPEG-PCL diblock copolymers with thermo-responsive sol–gel–sol phase transition. J. Polym. Sci. A. Polym. Chem. 44, 5413–5423 (2006)
38. Kim, M.R., Park, T.G.: Temperature-responsive and degradable hyaluronic acid/Pluronic composite hydrogels for controlled release of human growth hormone. J. Control Release 80(1–3), 69–77 (2002)
39. Kwon, Y.M., Kim, S.W.: Biodegradable triblock copolymer microspheres based on thermosensitive sol–gel transition. Pharm. Res. 21(2), 339–343 (2004)
40. Lee, B.H., Lee, Y.M., Sohn, Y.S., Song, S.: Synthesis and characterization of thermosensitive Poly(organophosphazenes) with methoxy-poly(ethylene glycol) and akylamines as side groups. Bull. Korean Chem. Soc. 23(4), 549–554 (2002)
41. Lee, S.B., Russell, A.J., Matyjaszewski, K.: ATRP synthesis of amphiphilic random, gradient, and block copolymers of 2-(Dimethylamino)ethyl methacrylate and n-butyl methacrylate in aqueous media. Biomacromolecules 4(5), 1386–1393 (2003)
42. Loh, X.J., Goh, S.H., Li, J.: New biodegradable thermogelling copolymers having very low gelation concentrations. Biomacromolecules 8(2), 585–593 (2007)
43. Lu, G., Jun, H.W.: Diffusion studies of methotrexate in Carbopol and Poloxamer gels. Int. J. Pharm. 160(1), 1–9 (1998)
44. Lutz, J., Akdemir, Ö., Hoth, A.: Point by point comparison of two thermosensitive polymers exhibiting a similar LCST: Is the age of Poly(NIPAM) over? J. Am. Chem. Soc. 128(40), 13046–13047 (2006)
45. Mahmoud, K.: Recombinant protein production:strategic technology and a vital research tool. Res. J. Cell Mol. Biol. 1(1), 9–22 (2007)
46. Mori, T., Shiota, Y., Minagawa, K., Tanaka, M.: Alternative approach to the design of thermosensitive polymers: The addition of hydrophobic groups to the ends of hydrophilic polyether. J. Polym. Sci. A Polym. Chem. 43(5), 1007–1013 (2005)
47. Mortisen, D., Peroglio, M., Alini, M., Eglin, D.: Tailoring thermoreversible hyaluronan hydrogels by ‘‘click’’ chemistry and RAFT polymerization for cell and drug therapy. Biomacromolecules 11(5), 1261–1272 (2010)
48. Müller, R.H., Rühl, D., Runge, S., Schulze-Forster, K., Mehnert, W.: Cytotoxicity of solid lipid nanoparticles as a function of the lipid matrix and the surfactant. Pharm. Res. 14(4), 458–462 (1997)
49. Paavola, A., Kilpeläinen, I., Yliruusi, J., Rosenberg, P.: Controlled release injectable liposomal gel of ibuprofen for epidural analgesia. Int. J. Pharm. 199(1), 85–93 (2000)
50. Packhaeuser, C.B., Schnieders, J., Oster, C.G., Kissel, T.: In situ forming parenteral drug delivery systems: An overview. Eur. J. Pharm. Biopharm. 58(2), 445–455 (2004)
51. Park, K.M., Bae, J.W., Joung, Y.K., Shin, J.W., Park, K.D.: Nano-aggregate of thermosensitive chitosan-Pluronic for sustained release of hydrophobic drug. Colloids Surf. B Biointerf. 63(1), 1–6 (2008)
52. Park, M., Chun, C., Ahn, S., Ki, M., Cho, C., Song, S.: Cationic and thermosensitive protamine conjugated gels for enhancing sustained human growth hormone delivery. Biomaterials 31(6), 1349–1359 (2010)
53. Park, S.Y., Chung, H.J., Lee, Y., Park, T.G.: Injectable and sustained delivery of human growth hormone using chemically modified Pluronic copolymer hydrogels. Biotechnol. J. 3(5), 669–675 (2008)
54. Park, Y., Yong, C.S., Kim, H., Rhee, J., Oh, Y., Kim, C., Choi, H.: Effect of sodium chloride on the release, absorption and safety of diclofenac sodium delivered by poloxamer gel. Int. J. Pharm. 263(1–2), 105–111 (2003)
55. Ramkissoon-Ganorkar, C., Liu, F., Baudys, M., Kim, S.W.: Modulating insulin-release profile from pH/thermosensitive polymeric beads through polymer molecular weight. J. Control Release 59(3), 287–298 (1999)
56. Ruel-Gariépy, E., Leroux, J.: In situ-forming hydrogels-review of temperature-sensitive systems. Eur. J. Pharm. Biopharm. 58(2), 409–426 (2004)
57. Seong, J., Jun, Y.J., Kim, B.M., Park, Y.M., Sohn, Y.S.: Synthesis and characterization of biocompatible poly(organophosphazenes) aiming for local delivery of protein drugs. Int. J. Pharm. 314(1), 90–96 (2006)
58. Shive, M.S., Anderson, J.M.: Biodegradation and biocompatibility of PLA and PLGA microspheres. Adv. Drug Deliv. Rev. 28(1), 5–24 (1997)
59. Singh, S., Webster, D.C., Singh, J.: Thermosensitive polymers: synthesis, characterization, and delivery of proteins. Int. J. Pharm. 341(1–2), 68–77 (2007)
60. Soga, O., van Nostrum, C.F., Ramzi, A., Visser, T., Soulimani, F., Frederik, P.M., Bomans, P.H., Hennink, W.E.: Physicochemical characterization of degradable thermosensitive polymeric micelles. Langmuir 20(21), 9388–9395 (2004)
61. Soga, O., van Nostrum, C.F., Fens, M., Rijcken, C.J.F., Schiffelers, R.M., Storm, G., Hennink, W.E.: Thermosensitive and biodegradable polymeric micelles for paclitaxel delivery. J. Control Release 103(2), 341–353 (2005)
62. Stile, R.A., Burghardt, W.R., Healy, K.E.: Synthesis and characterization of injectable Poly(N-isopropylacrylamide)-based hydrogels that support tissue formation in vitro. Macromolecules 32(22), 7370–7379 (1999)
63. Tai, H., Howard, D., Takae, S., Wang, W., Vermonden, T., Hennink, W.E., Stayton, P.S., Hoffman, A.S., Endruweit, A., Alexander, C., Howdle, S.M., Shakesheff, K.M.: Photo-cross-linked hydrogels from thermoresponsive PEGMEMA–PPGMA–EGDMA copolymers containing multiple methacrylate groups: mechanical property, swelling, protein release, and cytotoxicity. Biomacromolecules 10(10), 2895–2903 (2009)
64. Tai, H., Wang, W., Vermonden, T., Heath, F., Hennink, W.E., Alexander, C., Shakesheff, K.M., Howdle, S.M.: Thermoresponsive and photocrosslinkable PEGMEMA–PPGMA–EGDMA copolymers from a one-step ATRP synthesis. Biomacromolecules 10(4), 822–828 (2009)
65. Tang, Y., Singh, J.: Biodegradable and biocompatible thermosensitive polymer based injectable implant for controlled release of protein. Int. J. Pharm. 365(1–2), 34–43 (2009)
66. Tang, Y., Singh, J.: Thermosensitive drug delivery system of salmon calcitonin: In vitro release, in vivo absorption, bioactivity and therapeutic efficacies. Pharm. Res. 27(2), 272–284 (2010)
67. Toti, U.S., Moon, S.H., Kim, H.Y., Jun, Y.J., Kim, B.M., Park, Y.M., Jeong, B., Sohn, Y.S.: Thermosensitive and biocompatible cyclotriphosphazene micelles. J. Control Release 119(1), 34–40 (2007)
68. Vermonden, T., Besseling, N.A.M., van Steenbergen, M.J., Hennink, W.E.: Rheological studies of thermosensitive triblock copolymer hydrogels. Langmuir 22(24), 10180–10184 (2006)
69. Vermonden, T., Jena, S.S., Barriet, D., Censi, R., van der Gucht, J., Hennink, W.E., Siegel, R.A.: Macromolecular diffusion in self-assembling biodegradable thermosensitive hydrogels. Macromolecules 43(2), 782–789 (2010)
70. Wang, W.: Instability, stabilization, and formulation of liquid protein pharmaceuticals. Int. J. Pharm. 185(2), 129–188 (1999)
71. Wang, F., Li, Z., Khan, M., Tamama, K., Kuppusamy, P., Wagner, W.R., Sen, C.K., Guon, J.: Injectable, rapid gelling and highly flexible hydrogel composites as growth factor and cell carriers. Acta Biomater. 6(6), 1978–1991 (2010)
72. Wang, Z., Xu, X., Chen, C., Yun, L., Song, J., Zhang, X., Zhuo, R.: In situ formation of thermosensitive PNIPAAm-based hydrogels by Michael-type addition reaction. ACS Appl. Mater. Interf. 2(4), 1009–1018 (2010)
73. Wasan, K.M., Subramanian, R., Kwong, M., Goldberg, I.J., Wright, T., Johnston, T.P.: Poloxamer 407-mediated alterations in the activities of enzymes regulating lipid metabolism in rats. J. Pharm. Pharm. Sci. 6(2), 189–197 (2003)
74. Wei, X., Gong, C., Gou, M., Fu, S., Guo, Q., Shi, S., Luo, F., Guo, G., Qiu, L., Qiu, Z.: Biodegradable poly(epsilon-caprolactone)-poly(ethylene glycol) copolymers as drug delivery system. Int. J. Pharm. 381(1), 1–18 (2009)
75. Wu, J., Wei, W., Wang, L., Su, Z., Ma, G.: A thermosensitive hydrogel based on quaternized chitosan and poly(ethylene glycol) for nasal drug delivery system. Biomaterials 28(13), 2220–2232 (2007)
76. Xu, X., Wang, B., Wang, Z., Cheng, S., Zhang, X., Zhuo, R.: Fabrication of fast responsive, thermosensitive poly(N-isopropylacrylamide) hydrogels by using diethyl ether as precipitation agent. J. Biomed. Mater. Res. A 86(4), 1023–1032 (2008)
77. Yu, L., Zhang, Z., Zhang, H., Ding, J.: Biodegradability and biocompatibility of thermoreversible hydrogels formed from mixing a sol and a precipitate of block copolymers in water. Biomacromolecules 11(8), 2169–2178 (2010)
78. Yun, M., Choi, H., Jung, J., Kim, C.: Development of a thermo-reversible insulin liquid suppository with bioavailability enhancement. Int. J. Pharm. 189(2), 137–145 (1999)
79. Zentner, G.M., Rathi, R., Shih, C., McRea, J.C., Seo, M.H., Oh, H., Rhee, B.G., Mestecky, J., Moldoveanu, Z., Morgan, M., Weitman, S.: Biodegradable block copolymers for delivery of proteins and water-insoluble drugs. J. Control Release 72(1–3), 203–215 (2001)
80. Zhang, L., Zhu, W., Song, L., Wang, Y., Jiang, H., Xian, S., Ren, Y.: Effects of hydroxylpropyl-beta-cyclodextrin on in vitro insulin stability. Int. J. Mol. Sci. 10(5), 2031–2040 (2009)
81. Zhou, G., Harruna, I.I., Ingram, C.W.: Ruthenium-centered thermosensitive polymers. Polymer 46(24), 10672–10677 (2005)