Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions

Progress in Materials Science

Volumn 60, Issue 1, 2014, Pages 130-207

  Sakai, Taku ^a   Belyakov, Andrey ^b   Kaibyshev, Rustam ^b   Miura, Hiromi ^a   Jonas, John J ^c  

^a UNIVERSITY OF ELECTRO COMMUNICATIONS   (Japan)

^b BELGOROD STATE UNIVERSITY   (Russian Federation)

^c MCGILL UNIVERSITY   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

CRYSTAL MICROSTRUCTURE; DYNAMICS; PLASTIC DEFORMATION;

CONTINUOUS DYNAMIC RECRYSTALLIZATION; DISCONTINUOUS DYNAMIC RECRYSTALLIZATION; DYNAMIC AND STATIC RECRYSTALLIZATION; GRADUAL TRANSFORMATIONS; MICROSTRUCTURAL CHANGES; MULTIDIRECTIONAL FORGING; POST-DYNAMIC RECRYSTALLIZATION; SEVERE PLASTIC DEFORMATIONS;

DYNAMIC RECRYSTALLIZATION;

EID: 84886709187     PISSN: 00796425     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.pmatsci.2013.09.002     Document Type: Review

References (291)

1. J.E. Burke, and D. Turnbull Recrystallization and grain growth Prog Met Phys 3 1952 220 292
2. R.W. Cahn Recrystallization mechanisms H. Margolin, Recrystallization, grain growth and textures 1966 ASM Ohio 99 127
3. F. Haessner Recrystallization of metallic materials 1978 Dr. Riederer-Verlag, Gmbh Stuttgart
4. F.J. Humphreys, and M. Hatherly Recrystallization and related annealing phenomena 2nd ed. 2004 Elsevier Oxford
5. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, and M.E. Kassner Current issues in recrystallization: a review Mater Sci Eng A238 1997 219 274
6. J.E. Bailey, and P.B. Hirsch The recrystallization process in some polycrystalline metals Proc Roy Soc (Lond) A267 1962 11 30
7. 2-particle containing {0 1 1}<1 0 0> copper single crystals Acta Mater 51 2003 1507 1515
8. H. Ahlborn, E. Hornbogen, and U. Koster Recrystallisation mechanism and annealing texture in aluminium-copper alloys J Mater Sci 4 1969 944 950
9. E. Hornbogen, and U. Koster Recrystallization of two-phase alloys F. Haessner, Recrystallization of metallic materials 1978 Dr. Riederer-Verlag, Gmbh Stuttgart 159 194
10. O. Dimitrov, R. Fromageau, and C. Dimitrov Effects of trace impurities on recrystallization phenomena F. Haessner, Recrystallization of metallic materials 1978 Dr. Riederer-Verlag, Gmbh Stuttgart 137 157
11. D. Hardwick, C.M. Sellars, and W.J. Tegart Structural changes during the deformation of copper, aluminium and nickel at high temperatures and high strain rates J Inst Met 90 1961 17 22
12. J.J. Jonas, C.M. Sellars, and W.J. McG. Tegart Strength and structure under hot-working conditions Metall Rev 14 1969 1 24
13. H.J. McQueen, and J.J. Jonas Recovery and recrystallization during high temperature deformation R.J. Arsenault, Treatise on materials science and technology vol. 6 1975 Academic Press New York 393 493
14. S. Sakui, T. Sakai, and K. Takeishi Hot deformation of austenite in a plain carbon steel Trans ISIJ 17 1977 718 725
15. C.M. Sellars Recrystallization of metals during hot deformation Philos Trans Roy Soc Lond A 288 1978 147 158
16. H. Mecking, and G. Gottstein Recovery and recrystallization during deformation F. Haessner, Recrystallization of metallic materials 1978 Dr. Riederer-Verlag, Gmbh Stuttgart 195 222
17. T. Sakai, and M. Ohashi Dislocation substructures developed during dynamic recrystallization in polycrystalline nickel Mater Sci Technol 6 1990 1251 1257
18. T. Sakai Dynamic recrystallization microstructures under hot working conditions J Mater Process Technol 53 1995 349 361
19. T. Maki, K. Akasaka, K. Okuno, and I. Tamura Dynamic recrystallization of austenite in 18-8 stainless steels and 18Ni maraging steel Trans ISIJ 22 1982 253 261
20. T. Sakai, and J.J. Jonas Dynamic recrystallization - mechanical and microstructural considerations Acta Metall 32 1984 189 209
21. B. Derby The dependence of grain size on stress during dynamic recrystallization Acta Metall Mater 39 1991 955 962
22. A. Belyakov, H. Miura, and T. Sakai Dynamic recrystallization under warm deformation of a 304 type austenitic stainless steel Mater Sci Eng A A255 1998 139 147
23. W. Gao, A. Belyakov, H. Miura, and T. Sakai Dynamic recrystallization of copper polycrystals with different purities Mater Sci Eng A A265 1999 233 239
24. D. Ponge, and G. Gottstein Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior Acta Mater 46 1998 69 80
25. T. Sakai, and J.J. Jonas Plastic deformation: role of recovery and recrystallization K.H. Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer, S. Mahajan, Encyclopedia of materials: science and technology vol. 7 2001 Elsevier Oxford 7079 7084
26. J.K. Solberg, H.J. McQueen, N. Ryum, and E. Nes Influence of ultra-high strains at elevated temperatures on the microstructure of aluminium. Part I Philos Mag A 60 1989 447 471
27. S.J. Sales, T.R. McNelley, and H.J. McQueen Recrystallization and superplasticity at 300 C in an aluminum-magnesium alloy Metall Trans 22A 1991 1037 1047
28. L. Qing, H. Xiaoxu, Y. Mei, and Y. Jinfeng On deformation-induced continuous recrystallization in a superplastic Al-Li-Cu-Mg-Zr alloy Acta Metall Mater 40 1992 1753 1762
29. A. Belyakov, and R. Kaibyshev Structural changes in a ferritic steel during hot deformation Phys Met Metallogr 78 1994 91 97
30. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov Bulk nanostructured materials from severe plastic deformation Prog Mater Sci 45 2000 103 189
31. K. Tsuzaki, H. Xiaoxu, and T. Maki Mechanism of dynamic continuous recrystallization during superplastic deformation in a microduplex stainless steel Acta Mater 44 1996 4491 4499
32. N. Tsuji, Y. Matsubara, and Y. Saito Dynamic recrystallization of ferrite in interstitial free steel Scripta Mater 37 1997 477 484
33. S. Gourdet, and F. Montheillet An experimental study of the recrystallization mechanism during hot deformation of aluminum Mater Sci Eng A A283 2000 274 288
34. A. Galiyev, R. Kaibyshev, and G. Gottstein Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60 Acta Mater 49 2001 1199 1207
35. O. Sitdikov, and R. Kaibyshev Dynamic recrystallization in pure magnesium Mater Trans 42 2001 1928 1937
36. S. Gourdet, and F. Montheillet A model of continuous dynamic recrystallization Acta Mater 51 2003 2685 2699
37. F. Musin, A. Belyakov, R. Kaibyshev, Y. Motohashi, G. Itoh, and K. Tsuzaki Microstructure evolution in a cast 1421Al alloy during hot equal-channel angular extrusion Rev Adv Mater Sci 25 2010 107 112
38. A. Belyakov, and R. Kaibyshev Deformation mechanisms in a high-chromium ferritic steel: I. Phenomenological analysis Phys Met Metallogr 78 1994 240 245
39. A. Belyakov, H. Miura, and T. Sakai Dynamic recrystallization in ultra fine-grained 304 stainless steel Scripta Mater 43 2000 21 26
40. M.J. Luton, and C.M. Sellars Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformation Acta Metall 17 1969 1033 1043
41. I. Weiss, and J.J. Jonas Interaction between recrystallization and precipitation during the high temperature deformation of HSLA steels Metal Trans A 10A 1979 831 840
42. T. Sakai, H. Miura, and N. Muramatsu Effect of small amount of Co on dynamic recrystallization of Cu-Be Alloys Mater Trans JIM 36 1995 1023 1030
43. A. Belyakov, F.G. Wei, K. Tsuzaki, Y. Kimura, and Y. Mishima Incomplete recrystallization in cold worked steel containing TiC Mater Sci Eng A A471 2007 50 56
44. G. Glover, and C.M. Sellars Recovery and recrystallization during high temperature deformation of α-iron Metall Trans 4 1973 765 775
45. H. Yamagata Dynamic recrystallization and dynamic recovery in pure aluminum at 583 K Acta Metall Mater 43 1995 723 729
46. A. Belyakov, W. Gao, H. Miura, and T. Sakai Strain induced grain evolution in polycrystalline copper during warm deformation Metall Mater Trans A 29A 1998 2957 2965
47. A. Belyakov, T. Sakai, H. Miura, and R. Kaibyshev Grain refinement under multiple warm deformation in 304 type austenitic stainless steel ISIJ Int 39 1999 592 599
48. A. Belyakov, T. Sakai, H. Miura, and K. Tsuzaki Grain refinement in copper under large strain deformation Philos Mag A 81 2001 2629 2643
49. D. Kuhlmann-Wilsdorf, and N. Hansen Geometrically necessary, incidental and subgrain boundaries Scripta Metall Mater 25 1991 1557 1562
50. A. Belyakov, K. Tsuzaki, H. Miura, and T. Sakai Effect of initial microstructures on grain refinement in a stainless steel by large strain deformation Acta Mater 51 2003 847 861
51. O. Sitdikov, T. Sakai, E. Avtokratova, R. Kaibyshev, Y. Kimura, and K. Tsuzaki Grain refinement in a commercial Al-Mg-Sc alloy under hot ECAP conditions Mater Sci Eng A A444 2007 18 30
52. I. Mazurina, T. Sakai, H. Miura, O. Sitdikov, and R. Kaibyshev Effect of deformation temperature on microstructure evolution in aluminum alloy 2219 during hot ECAP Mater Sci Eng A A486 2008 662 671
53. O. Sitdikov, T. Sakai, H. Miura, and C. Hama Temperature effect on fine-grained structure formation in high-strength Al alloy 7475 during hot severe deformation Mater Sci Eng A A516 2009 180 188
54. A.N. Belyakov, and R.O. Kaibyshev Structural changes in corrosion-resistant steels during hot deformation Met Sci Heat Treat 34 1992 324 329
55. S.V. Zherebtsov, G.A. Salishchev, R.M. Galeyev, O.R. Valiakhmetov, S.Y. Mironov, and S.L. Semiatin Production of submicrocrystalline structure in large-scale Ti-6Al-4V billet by warm severe deformation processing Scripta Mater 51 2004 1147 1151
56. S. Mironov, M. Murzinova, S. Zherebtsov, G.A. Salishchev, and S.L. Semiatin Microstructure evolution during warm working of Ti-6Al-4V with a colony-α microstructure Acta Mater 57 2009 2470 2481
57. S. Zherebtsov, M. Murzinova, G. Salishchev, and S.L. Semiatin Spheroidization of the lamellar microstructure in Ti-6Al-4V alloy during warm deformation and annealing Acta Mater 59 2011 4138 4150
58. S.V. Zherebtsov, R.M. Galeyev, G.A. Salishchev, and M.M. Myshlyaev Formation of submicrocrystalline structure in a VT30 titanium alloy Phys Met Metallogr 87 1999 318 323
59. H. Miura, H. Aoyama, and T. Sakai Grain boundary misorientation effect on dynamic recrystallization of Cu-Si bicrystals J Jpn Inst Met 58 1994 267 275
60. H. Miura, T. Sakai, R. Mogawa, and J.J. Jonas Nucleation of dynamic recrystallization and variant selection in copper bicrystals Philos Mag 87 2007 4197 4209
61. A. Belyakov, H. Miura, and T. Sakai Dynamic recrystallization under warm deformation of polycrystalline copper ISIJ Int 38 1998 595 601
62. A.M. Wusatowska-Sarnek, H. Miura, and T. Sakai Nucleation and microtexture development under dynamic recrystallization of copper Mater Sci Eng A323 2002 177 186
63. A. Belyakov, H. Miura, and T. Sakai Dynamic recrystallization under warm deformation of a 304 type austenitic stainless steel Mater Sci Eng A255 1998 139 147
64. H. Miura, T. Sakai, S. Andiarwanto, and J.J. Jonas Nucleation of dynamic recrystallization at triple junctions in polycrystalline copper Philos Mag 85 2005 2653 2669
65. F. Montheillet, M. Cohen, and J.J. Jonas Axial stresses and texture development during the torsion testing of Al, Cu and α-Fe Acta Metall 32 1984 2077 2089
66. M. Ohashi, T. Endo, and T. Sakai Effect of initial grain size on the dynamic recrystallization of nickel J Jpn Inst Met 54 1990 435 441
67. T. Sakai, M.G. Akben, and J.J. Jonas Dynamic recrystallization during the transient deformation of a vanadium microalloyed steel Acta Metall 31 1983 631 642
68. M. Frommert, and G. Gottstein Mechanical behavior and microstructure evolution during steady-state dynamic recrystallization in the austenitic 800H Mater Sci Eng A A506 2009 101 110
69. J. Xing, Y. Soda, X. Yang, H. Miura, and T. Sakai Ultra-fine grain development in magnesium alloy AZ31 during severe large forging under decreasing temperature conditions Mater Trans 46 2005 1646 1650
70. X. Yang, H. Miura, and T. Sakai Dynamic evolution of new grains in magnesium alloy AZ31 during hot deformation Mater Trans 44 2003 197 203
71. J.W. Bowden, F.H. Samuel, and J.J. Jonas Effect of interpass time on austenite grain refinement by means of dynamic recrystallization of austenite Metall Trans A 22A 1991 2947 2957
72. P.R. Cetlin, S. Yue, J.J. Jonas, and T.M. Maccagno Influence of strain rate on interpass softening during the simulated warm rolling of interstitial free steels Metall Trans A 24A 1993 1543 1553
73. J.J. Jonas Effect of interpass time on the hot rolling behaviour of microalloyed steels Mater Sci Forum 284-286 1998 3 14
74. J.J. Jonas Effect of interpass time on dynamic and static softening during rolling M. Lamberigts, 2nd International conference on thermomechanical processing of steels, TMP'2004 2004 Stahleisen Dusseldorf 35 42
75. J.J. Jonas Effect of quench and interpass time on dynamic and static softening during hot rolling Steel Res Int 76 2005 392 398
76. L.N. Pussegoda, S. Yue, and J.J. Jonas Laboratory simulation of seamless tube piercing and rolling using dynamic recrystallization schedules Metall Trans A 21A 1990 153 164
77. L.N. Pussegoda, S. Yue, J.J. Jonas, and P.J. Hunt Development of dynamic recrystallization controlled rolling schedules during seamless tube rolling G. Tither, Z. Zhang, The second international conference on HSLA steels 1992 TMS Warrendale (PA) 159 163
78. L.N. Pussegoda, P.D. Hodgson, and J.J. Jonas Design of dynamic recrystallization controlled rolling schedules for seamless tube rolling Mater Sci Technol 8 1992 63 71
79. T.M. Maccagno, S. Yue, J.J. Jonas, and K. Dyck Simulated hot working, cold working, and annealing of Al-containing steels Metall Trans A 24A 1993 1589 1596
80. T.M. Maccagno, and J.J. Jonas Correcting for the effects of static and metadynamic recrystallization during the laboratory simulation of rod rolling ISIJ Int 34 1994 607 614
81. S. Yue, C. Roucoules, T.M. Maccagno, and J.J. Jonas Dynamic recrystallization in rod rolling M. Korchynsky, Microalloying '95 conference proceedings 1995 Iron and Steel Society Pittsburgh (PA) 355 364
82. T.M. Maccagno, J.J. Jonas, and P.D. Hodgson Spreadsheet modelling of grain size evolution during rod rolling ISIJ Int 36 1996 720 728
83. Yue S, Roucoules C, Maccagno TM, Jonas JJ. Dynamic recrystallization in rod rolling. In: 37th MWSP conference proceedings, October 1995. Hamilton (Canada): Iron and Steel Society, Inc.; 1996. p. 651-60.
84. P.D. Hodgson, J.J. Jonas, and S. Yue Growth during and after the static and metadynamic recrystallization of austenite Mater Sci Forum 94-96 1992 715 722
85. F. Boratto, R. Barbosa, S. Yue, and J.J. Jonas Effect of chemical composition on the critical temperatures of microalloyed steels I. Tamura, Proc int conf on phys metall of thermomechanical processing of steels and other metals (Thermec-88) 1988 Iron and Steel Institute of Japan Tokyo (Japan) 383 390
86. F. Boratto, S. Yue, J.J. Jonas, and T.H. Lawrence Design of schedules for the production of high strength microalloyed steel strip in a hot steckel mill I. Tamura, Proc int conf on phys metall of thermomechanical processing of steels and other metals (Thermec-88) 1988 Iron and Steel Institute of Japan Tokyo (Japan) 519 526
87. nr) in HSLA steels Int Mater Rev 57 2012 187 207
88. T.M. Maccagno, J.J. Jonas, S. Yue, B.J. McCrady, R. Slobodian, and D. Deeks Determination of recrystallization stop temperature from rolling mill logs and comparison with laboratory simulation results ISIJ Int 34 1994 917 922
89. F.H. Samuel, S. Yue, J.J. Jonas, and K.R. Barnes Effect of dynamic recrystallization on microstructural evolution during strip rolling ISIJ Int 30 1990 216 225
90. Jonas JJ. Dynamic recrystallization in hot strip mills. In: Chandra T, editor. Proc recrystallization '90. Warrendale (PA): TMS-AIME; 1990. p. 27-36.
91. B. Debray, P. Teracher, and J.J. Jonas Simulation of the hot rolling and accelerated cooling of a C-Mn ferrite-bainite strip steel Metall Mater Trans A 26A 1995 99 111
92. Jonas JJ. Dynamic recrystallization in strip mills - industrial fact or metallurgical fiction? In: Proc on thermomechanical processing in theory, modelling and practice. Stockholm (Sweden): The Swedish Society for Materials Technology; 1997. p. 24-34.
93. J.J. Jonas Dynamic recrystallization in strip mills - industrial fact or metallurgical fiction? T. Chandra, T. Sakai, International conference on thermomechanical processing of steels and other materials, THERMEC '97 1997 TMS Warrendale (PA) 31 45
94. F. Siciliano Jr., and J.J. Jonas Modeling the critical strain for the initiation of dynamic recrystallization during the hot strip rolling of niobium microalloyed steels Mater Sci Forum 284-286 1998 377 384
95. P.L. Karjalainen, T.M. Maccagno, and J.J. Jonas Softening and flow stress behavior of Nb microalloyed steels during hot rolling simulation ISIJ Int 35 1995 1523 1531
96. F. Montheillet, and J.J. Jonas Recrystallization, dynamic G.L. Trigg, Encyclopedia of applied physics vol. 16 1996 American Institute of Physics New York (NY) 205 225
97. J.J. Jonas, M.R. Barnett, and P.D. Hodgson Thermomechanical processing J.R. Groza, J.F. Shackelford, E.J. Lavernia, M.T. Powers, Materials processing handbook. Handbook series 2007 Taylor & Francis London (UK) 29-1 29-26
98. P.D. Hodgson, J.J. Jonas, and C.H.J. Davies Modeling of hot and warm working of steels C. Hakan Gür, J. Pan, Handbook of thermal process modeling of steels 2009 Taylor & Francis London (UK) 225 264
99. F. Montheillet, and J.J. Jonas Models of recrystallization A.S.M. Handbook, Fundamentals of modeling for metals processing vol. 22A 2009 AMS International Materials Park (OH) 220 231
100. F.H. Samuel, S. Yue, and J.J. Jonas Dynamic and static recrystallization in plain carbon and microalloyed steels during hot rolling T. Chandra, Proc recrystallization '90 1990 TMS-AIME Warrendale (PA) 325 330
101. L.N. Pussegoda, and J.J. Jonas Comparison of dynamic recrystallization and conventional controlled rolling schedules by laboratory simulation ISIJ Int 31 1991 278 288
102. S. Yue, D.Q. Bai, and J.J. Jonas The influence of static and dynamic recrystallization on mean flow stress and grain size in steel Can Metall Quart 33 1994 145 154
103. J.J. Jonas Influence of dynamic recrystallization on the hot rolling behaviour of steel L.G. Kuhn, 33rd Mechanical working and steel processing conference vol. XXIX 1992 Iron and Steel Society of AIME Warrendale (PA) 359 362
104. A. Najafizadeh, J.J. Jonas, and S. Yue Effect of dynamic recrystallization on grain refinement of IF steels Mater Sci Forum 113-115 1993 441 446
105. J.J. Jonas Dynamic recrystallization - scientific curiosity or industrial tool? Mater Sci Eng A A184 1994 155 165
106. Jonas JJ, Maccagno TM, Yue S. The role of dynamic recrystallization in industrial hot working. In: Proc int symp on phase transformations during the thermomechanical processing of steel, 34th annual conference of metallurgists. Vancouver: CIM; 1995. p. 179-93.
107. Jonas JJ. Dynamic recrystallization scientific curiosity or industrial tool? In: Javier F Gil Mur, editor. Proc of congress of mechanical properties, Barcelona, Spain; 1996. p. 1-22.
108. J.J. Jonas Dynamic recrystallization: laboratory curiosity to industrial tool E.J. Palmiere, M. Mahfouf, C. Pinna, Int conf on thermomechanical processing 2002 BBR Solution Ltd Chesterfield (UK) 2 8
109. Wierzbinski SL, Guillet AM, Jonas JJ. Dynamic recrystallization of Cu-30Ni during hot compression. In: 5th Conf on plasticity of metals and alloys. Podbrezová: CSSR; 1988. p. 405-10.
110. L. Jiang, G. Huang, S. Godet, J.J. Jonas, and A.A. Luo Particle-stimulated nucleation of dynamic recrystallization in AZ31 alloy at elevated temperatures Mater Sci Forum 488-489 2005 261 264
111. Ph. Bocher, J.J. Jonas, and F. Montheillet Nucleation and growth during dynamic recrystallization of a 304 stainless steel H.J. McQueen, E.V. Konopleva, N.D. Ryan, Hot workability of steels and light alloys-composites 1996 The Metallurgical Society of CIM Montreal 443 450
112. Ph. Bocher, F. Montheillet, and J.J. Jonas Microstructural evolution during the dynamic recrystallization of a 304 stainless steel T.R. McNelley, Proc third international conference on recrystallization and related phenomena 1997 Monterey Institute of Advanced Studies Monterey (CA) 355 362
113. Ph. Bocher, and J.J. Jonas Characteristics of nucleation and growth during the dynamic recrystallization of a 304 stainless steel T. Sakai, H.G. Suzuki, The 4th international conference on recrystallization and related phenomena 1999 The Japan Institute of Metals Sendai (Japan) 25 35
114. Laasraoui A, Jonas JJ. Effect of dynamic recrystallization on the constitutive relations for flow during steel rolling. In: Lowe TC, Rollett AD, Follansbee PS, Daehn GS, editors. Modelling the deformation of crystalline solids. Warrendale (PA): The Minerals, Metals & Materials Society of AIME; 1991, p. 561-78.
115. A. Hildenbrand, L.S. Tóth, A. Molinari, J. Baczynski, and J.J. Jonas Self-consistent polycrystal modelling of dynamic recrystallization during the shear deformation of a Ti IF steel Acta Mater 47 1999 447 460
116. J.M. Cabrera, J.M. Prado, and J.J. Jonas The dynamic recrystallization kinetics of a medium carbon microalloyed steel T.R. McNelley, Proc third international conference on recrystallization and related phenomena 1997 Monterey Institute of Advanced Studies Monterey (CA) 381 388
117. S.N. Cho, K.B. Kang, and J.J. Jonas The dynamic, static and metadynamic recrystallization of a Nb-microalloyed steel ISIJ Int 41 2001 63 69
118. S.H. Cho, K.B. Kang, and J.J. Jonas Effect of manganese on recrystallization kinetics of niobium microalloyed steel Mater Sci Technol 18 2002 389 395
119. G.R. Stewart, J.J. Jonas, and F. Montheillet Kinetics and critical conditions for the initiation of dynamic recrystallization in 304 stainless steel ISIJ Int 44 2004 1581 1589
120. G.R. Stewart, Am. Elwazri, S. Yue, and J.J. Jonas Modeling of dynamic recrystallization kinetics in austenitic stainless and hypereutectoid steels Mater Sci Technol 22 2006 519 524
121. G.R. Stewart, A.M. Elwazri, S. Yue, and J.J. Jonas A kinetic model for dynamic recrystallization in austenitic stainless and hypereutectoid steels Mater Sci Technol 22 2006 519 524
122. S.H. Cho, K.B. Kang, and J.J. Jonas Mathematical modeling of the recrystallization kinetics of Nb microalloyed steels ISIJ Int 41 2001 766 773
123. J.J. Jonas, X. Quelennec, L. Jiang, and E. Martin The Avrami kinetics of dynamic recrystallization Acta Mater 57 2009 2748 2756
124. Quelennec X, Martin E, Jiang L, Jonas JJ. Work hardening and kinetics of dynamic recrystallization during the hot deformation of austenite. J Phys Conf Ser 2010;240:ID No. 012003/012082.
125. X. Quelennec, N. Bozzolo, J.J. Jonas, and R. Loge A new approach to modeling the flow curve of hot deformed austenite ISIJ Int 51 2011 945 950
126. X. Quelennec, and J.J. Jonas Simulation of austenite flow curves under industrial rolling conditions using a physical dynamic recrystallization model ISIJ Int 52 2012 1145 1152
127. J.J. Jonas, X. Quelennec, and L. Jiang Modeling the flow curve of hot deformed austenite Mater Sci Forum 715-716 2012 81 88
128. Mavropoulos T, Jonas JJ, Ruddle GE. Effect of boron on dynamic and static recrystallization in an ultra low carbon Nb steel. In: Proc conf on 'HSLA' steels '85', Beijing, China; 1985. p. 229-34.
129. R. Le Gall, and J.J. Jonas Solute drag effects during the dynamic recrystallization of nickel Acta Mater 47 1999 4365 4374
130. R. Le Gall, P. Bocher, B. Verlinden, and J.J. Jonas Effect of solutes on the dynamic recrystallization microstructure of nickel J Phys 11 2001 Pr477 Pr482
131. Le Gall R, Jonas JJ. Effects of solutes on kinetics, grain size and texture during the dynamic recrystallization of nickel. In: Chandra T, Higashi K, Suryanarayana C, Tome C, editors. Proceedings international conference on processing and manufacturing of advances materials. Special Issue of J Mater Process Technol on CD ROM; 2001, 117/3.
132. J.J. Jonas, and M.G. Akben Retardation of austenite recrystallization by solutes: a critical appraisal Metal Forum 4 1981 92 101
133. C. Roucoules, P.D. Hodgson, S. Yue, and J.J. Jonas Dynamic and post-dynamic recrystallization in a Mo-Ti steel A.J. DeArdo, Proc international conference on processing, microstructure and properties of microalloyed and other modern high strength low alloy steels 1991 AIME Warrendale (PA) 95 104
134. C. Roucoules, S. Yue, and J.J. Jonas Microstructural changes following dynamic recrystallization in microalloyed austenite Mater Sci Forum 113-115 1993 455 460
135. C. Roucoules, P.D. Hodgson, S. Yue, and J.J. Jonas Softening and microstructural change following the dynamic recrystallization of austenite Metall Mater Trans A 25A 1994 389 400
136. C. Roucoules, S. Yue, and J.J. Jonas Effect of alloying elements on metadynamic recrystallization in HSLA steels Metall Mater Trans A 26A 1995 181 190
137. C. Roucoules, S. Yue, and J.J. Jonas Effect of dynamic and metadynamic recrystallization on rolling load and microstructure J.H. Beynon, 2nd International conference on modelling of metal rolling processes 1993 The Institute of Materials London (UK) 165 179
138. J.J. Jonas, E.I. Poliak, and A. Najafizadeh The strain dependence of post-deformation softening during the hot compression of 304H stainless steel Mater Sci Forum 539-543 2007 100 107
139. P.D. Hodgson, J.J. Jonas, and S. Yue Strain accumulation and post-dynamic recrystallization in C-Mn steels Mater Sci Forum 113-115 1993 473 478
140. A. Najafizadeh, J.J. Jonas, G.R. Stewart, and E.I. Poliak The strain dependence of post-dynamic recrystallization in 304H stainless steel Metall Mater Trans A 37 2006 1899 1906
141. A. Najafizadeh, and J.J. Jonas The strain-independence of interpass softening during the hot compression of 304 H stainless steel Mater Sci Forum 539-543 2007 4932 4937
142. A. Dehghan-Manshadi, J.J. Jonas, P.D. Hodgson, and M.R. Barnett Correlation between the deformation and post-deformation behaviors of hot worked austenite ISIJ Int 48 2008 208 211
143. Mintz B, Jonas JJ, Yue S. The influence of dynamic recrystallization on the hot ductility of steels at low strain rates. In: Chandra T, editor. Proc recrystallization '90. Warrendale (PA): TMS-AIME; 1990. p. 553-8.
144. B. Mintz, R. Abushosha, and J.J. Jonas Influence of dynamic recrystallization on the tensile ductility of steels in the temperature range 700 to 1150 C ISIJ Int 32 1992 241 249
145. J. Baczynski, and J.J. Jonas Torsion textures produced by the dynamic recrystallization of a Ti IF steel Z. Liang, L. Zuo, Y. Chu, Proc of the 11th conference on textures of materials (ICOTOM-11). Textures of materials vol. 1 1996 International Academic Publishers Beijing (China) 387 392
146. J. Baczynski, and J.J. Jonas Torsion textures produced by dynamic recrystallization in α-iron and two interstitial-free steels Metall Mater Trans A 29A 1998 447 462
147. J.J. Jonas, L.S. Tóth, and T. Urabe Modelling the effects of static and dynamic recrystallization on texture development Mater Sci Forum 157-162 1994 1713 1730
148. J. Baczynski, and J.J. Jonas Effect of dynamic recrystallization on texture development in a Ti-Nb IF steel T.R. McNelley, Proc third international conference on recrystallization and related phenomena 1997 Monterey Institute of Advanced Studies Monterey (CA) 339 346
149. J. Baczynski, I. DeArdo, and J.J. Jonas Dynamic recrystallization textures in ferrite and ferritic stainless steels Mater Sci Forum 273-275 1998 465 470
150. Ph. Bocher, J. Azar, B.L. Adams, and J.J. Jonas Using OIM to interpret the dynamically recrystallized texture of a low stacking fault energy FCC material Mater Sci Forum 273-275 1998 249 254
151. J.J. Jonas Effect of austenite recrystallization on toughness of pipeline steels Mater Sci Forum 753 2013 546 553
152. J.J. Jonas, and L.S. Tóth Modelling oriented nucleation and selective growth during dynamic recrystallization Scripta Metall Mater 27 1992 1575 1580
153. L.S. Tóth, and J.J. Jonas Modelling the texture changes produced by dynamic recrystallization Scripta Metall Mater 27 1992 359 363
154. E.I. Poliak, and J.J. Jonas A one-parameter approach to determining the critical conditions for the initiation of dynamic recrystallization Acta Metall Mater 44 1996 127 136
155. E.I. Poliak, and J.J. Jonas Initiation of dynamic recrystallization in constant strain rate hot deformation ISIJ Int 43 2003 684 691
156. E.I. Poliak, and J.J. Jonas The critical strain for dynamic recrystallization E.J. Palmiere, M. Mahfouf, C. Pinna, Int conf on thermomechanical processing 2002 Institute of Metals London (UK) 405 412
157. J.J. Jonas, and E.I. Poliak The critical strain for dynamic recrystallization in rolling mills Mater Sci Forum 426-432 2003 57 66
158. E.I. Poliak, and J.J. Jonas Critical strain for dynamic recrystallization in variable strain rate hot deformation ISIJ Int 43 2003 692 700
159. A. Najafizadeh, and J.J. Jonas Predicting the critical stress for initiation of dynamic recrystallization ISIJ Int 46 2006 1679 1684
160. H. Yada, Y. Matsumura, and T. Senuma Massive type transformation induced by hot deformation in low carbon steels K. Shimizu, I. Tamura, Proc of the int conf on martensitic transformation 1986 Japan Institute of Metals Sendai (Japan) 515 520
161. H. Yada, Y. Matsumura, and T. Senuma A new thermomechanical heat treatment for grain refining in low carbon steels I. Tamura, Proc 1st conf physical metallurgy of thermomechanical processing of steels and other metals (THERMEC-88) 1988 Iron and Steel Institute of Japan Tokyo (Japan) 200 207
162. X. Sun, H. Luo, H. Dong, Q. Liu, and Y. Weng Microstructural evolution and kinetics for post-dynamic transformation in a plain low carbon steel ISIJ Int 48 2008 994 1000
163. J.K. Choi, D.H. Seo, J.S. Lee, K.K. Um, and W.Y. Choo Formation of ultrafine ferrite by strain-induced dynamic transformation in plain low carbon steel ISIJ Int 43 2003 746 754
164. J.J. Jonas, C. Ghosh, X. Quelennec, and V.V. Basabe The critical strain for dynamic transformation in hot deformed austenite ISIJ Int 53 2013 145 151
165. C. Ghosh, V.V. Basabe, and J.J. Jonas Determination of the critical strains for the initiation of dynamic transformation and dynamic recrystallization in four steels of increasing carbon contents Steel Res Int 84 2013 490 494
166. J.J. Jonas, C. Ghosh, and V.V. Basabe Effect of dynamic transformation on the mean flow stress Steel Res Int 84 2013 253 258
167. V.M. Segal, V.I. Reznikov, A.E. Drobyshevkij, and V.I. Kopylov Plastic metal working by simple shear Metally 1 1981 115 123
168. F.J. Humphreys, P.B. Prangnell, J.R. Bowen, A. Gholinia, and C. Harris Developing stable fine-grained microstructures by large strain deformation Philos Trans Roy Soc Lond A 357 1999 1663 1681
169. R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer, and Y.T. Zhu Producing bulk ultrafine-grained materials by severe plastic deformation JOM 58 2006 33 39
170. R.Z. Valiev, and T.G. Langdon The art and science of tailoring materials by nanostructuring for advanced properties using SPD techniques Adv Eng Mater 12 2010 677 691
171. S.C. Shrivastava, J.J. Jonas, and G. Canova Equivalent strain in large deformation testing: theoretical and practical considerations J Mech Phys Solids 30 1982 75 90
172. A.P. Zhilyaev, and T.G. Langdon Using high-pressure torsion for metal processing: fundamentals and applications Prog Mater Sci 53 2008 893 979
173. G.A. Salishchev, O.R. Valiakhmetov, and R.M. Galeyev Formation of submicrocrystalline structure in the titanium alloy VT8 and its influence on mechanical properties J Mater Sci 28 1993 2898 2902
174. S. Saito, N. Tsuji, H. Utsunomiya, T. Sakai, and R.G. Hong Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process Scripta Mater 39 1998 1221 1227
175. N. Tsuji, Y. Saito, S.H. Lee, and Y. Minamino ARB (accumulative roll-bonding) and other new techniques to produce bulk ultrafine grained materials Adv Eng Mater 5 2003 338 344
176. J. Richert, and M. Richert A new method for unlimited deformation of metals and alloys Aluminium 62 1986 604 607
177. Y. Kimura, and S. Takaki Microstructural changes during annealing of work-hardened mechanically milled metallic powders Mater Trans JIM 36 1995 289 296
178. C.C. Koch Synthesis of nanostructured materials by mechanical milling: problems and opportunities Nanostruct Mater 9 1997 13 22
179. Y. Takayama, T. Miura, H. Kato, and H. Watanabe Microstructural and textural evolution by continuous cyclic bending and annealing in a high purity titanium Mater Trans 45 2004 2826 2831
180. J.Y. Huang, Y.T. Zhu, H. Jiang, and T.C. Lowe Microstructures and dislocation configurations in nanostructured Cu processed by repetitive corrugation and straightening Acta Mater 49 2001 1497 1505
181. D.W. Suh, S. Torizuka, A. Ohmori, T. Inoue, and K. Nagai Dynamic restoration process of Ni-30Fe alloy during hot deformation ISIJ Int 42 2002 432 439
182. L.S. Toth, M. Arzaghi, J.J. Fundenberger, B. Beausir, O. Bouaziz, and R.
183. J.D. Embury, A.S. Keh, and R.S. Fisher Substructural strengthening in materials subjected to large plastic strains Trans AIME 236 1966 1252 1260
184. G. Langford, and M. Cohen Microstructural analysis by high-voltage electron diffraction of severely drawn iron wires Metall Trans A 6A 1975 901 910
185. J. Gil Sevillano, P. van Houtte, and E. Aernoudt Large strain work hardening and textures Prog Mater Sci 25 1980 69 412
186. V.V. Rybin Large plastic deformations and destruction of metals 1987 Metallurgia Moscow
187. B. Bay, N. Hansen, D.A. Hughes, and D. Kuhlmann-Wilsdorf Evolution of f.c.c. deformation structures in polyslip Acta Metall Mater 40 1992 205 219
188. Q. Liu, D. Juul Jensen, and N. Hansen Effect of grain orientation on deformation structure in cold-rolled polycrystalline aluminium Acta Mater 46 1998 5819 5838
189. A. Belyakov, and R. Kaibyshev Structural changes of ferritic stainless steel during severe plastic deformation Nanostruct Mater 6 1995 893 896
190. R.Z. Valiev, Yu.V. Ivanisenko, E.F. Rauch, and B. Baudelet Structure and deformation behavior of Armco iron subjected to severe plastic deformation Acta Mater 44 1996 4705 4712
191. A. Belyakov, Y. Sakai, T. Hara, Y. Kimura, and K. Tsuzaki Evolution of grain boundary assemblies in Fe-0.6%O under mechanical milling followed by consolidating rolling Scripta Mater 48 2003 1111 1116
192. M. Arzaghi, J.J. Fundenberger, L.S. Toth, R. Arruffat, L. Faure, and B. Beausir Microstructure, texture and mechanical properties of aluminum processed by high-pressure tube twisting Acta Mater 60 2012 4393 4408
193. A. Belyakov, Y. Kimura, Y. Adachi, and K. Tsuzaki Microstructure evolution in ferritic stainless steels during large strain deformation Mater Trans 45 2004 2812 2821
194. R.Z. Valiev, A.V. Korznikov, and R.R. Mulyukov Structure and properties of ultrafine-grained materials produced by severe plastic deformation Mater Sci Eng A A168 1993 141 148
195. A. Belyakov, T. Sakai, H. Miura, and R. Kaibyshev Strain-induced submicrocrystalline grains developed in austenitic stainless steel under severe warm deformation Philos Mag Lett 80 2000 711 718
196. C. Kobayashi, T. Sakai, A. Belyakov, and H. Miura Ultrafine grain development in copper during multidirectional forging at 195 K Philos Mag Lett 87 2007 751 766
197. G.I. Rosen, D. Juul Jensen, D.A. Hughes, and N. Hansen Microstructure and local crystallography of cold rolled aluminium Acta Metall Mater 43 1995 2563 2579
198. P.J. Hurley, and F.J. Humphreys The application of EBSD to the study of substructural development in a cold rolled single-phase aluminium alloy Acta Mater 51 2003 1087 1102
199. T. Morikawa, K. Higashida, and T. Sato Fine-grained structures developed along grain boundaries in a cold-rolled austenitic stainless steel ISIJ Int 42 2002 1527 1533
200. H. Miura, H. Nakao, and T. Sakai Enhanced grain refinement induced by deformation twinning during multi-directional forging of Cu and Cu-Zn alloy Trans Mater 48 2007 2539 2541
201. A. Belyakov, T. Sakai, H. Miura, R. Kaibyshev, and K. Tsuzaki Continuous recrystallization in austenitic stainless steel after large strain deformation Acta Mater 50 2002 1547 1557
202. T. Sakai, A. Belyakov, and H. Miura Ultrafine grain formation in ferritic stainless steel during severe plastic deformation Metall Maters Trans A 39A 2008 2206 2214
203. M.A. Meyers, and K.K. Chawla Mechanical behavior of materials 2009 Cambridge University Press New York
204. A. Belyakov, T. Sakai, and H. Miura Fine-grained structure formation in austenitic stainless steel under multiple deformation at 0.5 Tm Mater Trans, JIM 41 2000 476 484
205. O. Sitdikov, T. Sakai, A. Goloborodko, H. Miura, and R. Kaibyshev Grain refinement in coarse-grained 7475 Al alloy during severe hot forging Philos Mag 85 2005 1159 1175
206. K. Higashida, J. Takamura, and N. Narita The formation of deformation bands in f.c.c crystals Mater Sci Eng 81 1986 239 258
207. J. Xing, X. Yang, H. Miura, and T. Sakai Mechanical properties of magnesium alloy AZ31 after sever plastic deformation Mater Trans 49 2008 69 75
208. H. Miura, G. Yu, X. Yang, and T. Sakai Microstructure and mechanical properties of AZ61 Mg alloy prepared by multi directional forging Trans Nonferrous Met Soc China 20 2010 1294 1298
209. X. Yang, H. Miura, and T. Sakai Effect of initial grain size and strain path on grain refinement in magnesium alloy AZ31 Mater Sci Forum 539-543 2007 1632 1637
210. T. Sakai, and H. Miura Mechanical properties of fine-grained magnesium alloys processed by severe plastic forging F. Czerwinski, Magnesium alloys - design, processing and properties 2011 InTechk Rijeka (Croatia) 219 244
211. O.A. Kaibyshev Superplasticity of alloys, intermetallics and ceramics 1992 Springer Berlin
212. T. Sakai, X. Yang, and H. Miura Dynamic evolution of fine grained structure and superplasticity of 7075 aluminum alloy Mater Sci Eng A 234-236 1997 857 860
213. X. Yang, H. Miura, and T. Sakai Continuous dynamic recrystallization in a superplastic 7075 aluminum alloy Mater Trans 43 2002 2400 2407
214. W. Blum, Q. Zhu, R. Markel, and H.J. McQueen Geometric dynamic recrystallization in hot torsion of Al-5Mg-0.6Mn (AA5083) Mater Sci Eng A A205 1996 23 30
215. D.A. Hughes, and N. Hansen High angle boundaries formed by grain subdivision mechanism Acta Mater 45 1997 3871 3886
216. A.E. Romanov, and V.I. Vladimirov Disclinations in crystalline solids F.R.N. Nabarro, Dislocations in solids vol. 9 1992 Elsevier 191 402
217. V.V. Rybin, A.A. Zisman, and N.Y. Zolotorevsky Junction disclinations in plastically deformed crystals Acta Mater 41 1993 2211 2217
218. M. Zehetbauer Cold work hardening in stages IV and V of f.c.c. metals - II. Model fits and physical results Acta Mater 41 1993 589 599
219. P. Les, and M. Zehetbauer Evolution of microstructural parameters in large strain deformation: description by Zehetbauer's model Key Eng Mater 97-98 1994 335 340
220. Y. Estrin, L.S. Toth, A. Molinari, and Y. Brechet A dislocation-based model for all hardening stages in large strain deformation Acta Mater 46 1998 5509 5522
221. L.S. Toth, A. Molinari, and Y. Estrin Strain hardening at large strains as predicted by dislocation based polycrystal plasticity model J Eng Mater Technol 124 2002 71 77
222. O. Bouaziz, Y. Estrin, Y. Brechet, and J.D. Embury Critical grain size for dislocation storage and consequences for strain hardening of nanocrystalline materials Scripta Mater 63 2010 477 479
223. Y. Estrin, and A. Vinogradov Extreme grain refinement by severe plastic deformation: a wealth of challenging science Acta Mater 61 2013 782 817
224. H. Mughrabi Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals Acta Mater 31 1983 1367 1379
225. L.S. Toth, Y. Estrin, R. Lapovok, and C. Gu A model of grain fragmentation based on lattice curvature Acta Mater 58 2010 1782 1794
226. I. Mazurina, T. Sakai, H. Miura, O. Sitdikov, and R. Kaibyshev Grain refinement in aluminum alloy 2219 during ECAP at 250 C Mater Sci Eng A 473 2008 297 305
227. L.S. Toth, B. Beausir, C.F. Gu, Y. Estrin, N. Scheerbaum, and C.H.J. Davies Effect of grain refinement by severe plastic deformation on the next neighbor misorientation distribution Acta Mater 58 2010 6706 6716
228. E. Arzt Size effects in materials due to microstructural and dimensional constraints: a comparative review Acta Mater 46 1998 5611 5626
229. N. Dudova, A. Belyakov, T. Sakai, and R. Kaibyshev Dynamic recrystallization mechanisms operating in a Ni-20%Cr alloy under hot-to-warm working Acta Mater 58 2010 3624 3632
230. H. Beladi, P. Cizek, and P.D. Hodgson Dynamic recrystallization of austenite in Ni-30 Pct Fe model alloy: microstructure and texture evolution Metall Mater Trans A 40A 2009 1175 1189
231. I. Mazurina, T. Sakai, H. Miura, O. Sitdikov, and R. Kaibyshev Partial grain refinement in Al-3%Cu alloy during hot ECAP Mater Trans 50 2009 101 110
232. T. Sakai, and H. Miura Ultrafine grain formation in aluminum alloys during hot severe plastic deformation Mater Sci Forum 706-709 2012 1829 1834
233. A. Duckham, R.D. Knutsen, and O. Engler Influence of deformation variables on the formation of copper-type shear bands in Al-1Mg Acta Mater 49 2001 2739 2749
234. O. Sitdikov, E. Avtokratova, T. Sakai, and K. Tsuzaki Ultra fine-grain structure formation in an Al-Mg-Sc alloy during warm ECAP Metall Maters Trans A 44A 2013 1087 1100
235. T. Sakai, H. Miura, A. Goloborodko, and O. Sitdikov Continuous dynamic recrystallization during the transient severe deformation of aluminum alloy 7475 at high temperature Acta Mater 57 2009 153 162
236. T. Sakai, Y. Nagao, M. Ohashi, and J.J. Jonas Flow stress and structural change during the transient dynamic recrystallization of nickel Mater Sci Technol 2 1986 659 665
237. H. Watanabe, H. Tsutsui, T. Mukai, K. Ishikawa, Y. Okanda, and M. Kohzu Grain size control of commercial wrought Mg-Al-Zn alloys utilizing dynamic recrystallization Mater Trans 42 2001 1200 1205
238. R.Z. Valiev, I.V. Alexandrov, Y.T. Zhu, and T.C. Lowe Paradox of strength and ductility in metals processed by severe plastic deformation J Mater Res 17 2002 5 8
239. Salichshev GA, Galeyev RM, Valiakhmetov OA, Zherebtsov SV, Mironov SYu, Malysheva SP, et al. Submicrocrystalline titanium and titanium alloys: structure and mechanical properties. In: Gorynin IV, Ushkov SS, editors. Proc int conf titanium'99 science and technology. S-Peterburg (Russia): Central Research Institute of Structural Materials; 1999. p. 651-8.
240. S.V. Zherebtsov, G.A. Salishchev, and R.M. Galeyev Formation of submicrocrystalline structure in titanium and its alloy under severe plastic deformation Defect Diffus Forum 208-209 2002 237 240
241. S. Zherebtsov, G. Salishchev, R. Galeyev, and K. Maekawa Mechanical properties of Ti-6Al-4V titanium alloy with submicrocrystalline structure produced by severe plastic deformation Mater Trans 46 2005 2020 2025
242. G.A. Salichshev, R.M. Galeyev, S.P. Malysheva, S.V. Zherebtsov, SYu Mironov, and O.A. Valiakhmetov Formation of submicrocrystalline structure in titanium and titanium alloys and their mechanical properties Met Sci Heat Treat 48 2006 63 69
243. S. Zherebtsov, E. Kudryavtsev, S. Kostjuchenko, S. Malysheva, and G. Salishchev Strength and ductility-related properties of ultrafine grained two-phase titanium alloy produced by warm multiaxial forging Mater Sci Eng A 536 2012 190 196
244. A. Gholinia, P.B. Prangnell, and M.V. Markushev The effect of strain path on the development of deformation structures in severely deformed aluminium alloys processed by ECAE Acta Mater 48 2000 1115 1130
245. Z. Horita, T. Fujinami, M. Nemoto, and T.G. Langdon Equal-channel angular pressing of commercial aluminum alloys: grain refinement, thermal stability and tensile properties Metall Mater Trans A 31A 2000 691 701
246. T.G. Langdon, M. Furukawa, M. Nemoto, and Z. Horita Using equal-channel angular pressing for refining grain size JOM 52 2000 30 33
247. J.S. Hayes, R. Keyte, and P.B. Prangnell Effect of grain size on tensile behavior of a submicron grained Al-3wt-%Mg alloy produced by severe deformation Mater Sci Technol 16 2000 1259 1263
248. R. Kaibyshev, and A. Mogucheva Effect of ECAP on mechanical properties of an AA2014 alloy Mater Sci Forum 667-669 2011 931 936
249. A. Mogucheva, and R. Kaibyshev Effect of ECAP on microstructure and mechanical properties of an Al-Mg-Sc alloy Mater Sci Forum 667-669 2011 949 954
250. R. Kaibyshev, A. Mogucheva, and A. Dubina Strategy for achieving high strength in Al-Mg-Sc alloys by intence plastic straining Mater Sci Forum 706-709 2012 55 60
251. A. Mogucheva, D. Zyabkin, and R. Kaibyshev Effect of the thermomechanical processing on microstructure and properties of an Al-Ce alloy Mater Sci Forum 706-709 2012 361 366
252. M. Kamamichi, M. Furukawa, Z. Horita, and T.G. Langdon Equal-channel angular pressing using plate samples Mater Sci Eng A A361 2003 258 266
253. G.J. Raab, R.Z. Valiev, T.C. Lowe, and Y.T. Zhu Continuous processing of ultrafine grained Al by ECAP-Conform Mater Sci Eng A A382 2004 30 34
254. I. Nikulin, R. Kaibyshev, and T. Sakai Superplasticity in a 7075 alumimun alloy processed by ECAE and subsequent isothermal rolling Mater Sci Eng A A407 2005 62 70
255. C. Etherington Conform and the recycling of non-ferrous scrap metals Conserv Recycling 2 1978 19 29
256. A. Belyakov, Y. Kimura, and K. Tsuzaki Microstructure evolution in dual phase stainless steel during severe deformation Acta Mater 54 2006 2521 2532
257. S.V. Zherebtsov, G.S. Dyakonov, A.A. Salem, S.P. Malysheva, G.A. Salishchev, and S.L. Semiatin Mater Sci Eng A A528 2011 3474 3479
258. A. Belyakov, K. Tsuzaki, and R. Kaibyshev Nanostructure evolution in an austenitic stainless steel subjected to multiple forging at ambient temperature Mater Sci Forum 667-669 2011 553 558
259. I. Shakhova, V. Dudko, A. Belyakov, K. Tsuzaki, and R. Kaibyshev Effect of large strain cold rolling and subsequent annealing on microstructure and mechanical properties of an austenitic stainless steel Mater Sci Eng A A545 2012 176 186
260. Y. Nakao, and H. Miura Nano-grain evolution in austenitic stainless steel during multi-directional forging Mater Sci Eng A A528 2010 1310 1317
261. M. Tikhonova, Y. Kuzminova, A. Belyakov, and R. Kaibyshev Nanocrystalline S304H austenitic stainless steel processed by multiple forging Rev Adv Mater Sci 31 2012 68 73
262. I. Shakhova, A. Belyakov, R. Kaibyshev, Y. Kimura, and K. Tsuzaki Submicrocrystalline structures and tensile behaviour of stainless steels subjected to large strain deformation and subsequent annealing Adv Mater Res 409 2012 607 612
263. A. Belyakov, K. Tsuzaki, Y. Kimura, and Y. Mishima Tensile behaviour of submicrocrystalline ferritic steel processed by large-strain deformation Philos Mag Lett 89 2009 201 212
264. L. Chen, F.P. Yuan, P. Jiang, and X.L. Wu Mechanical properties and nanostructures in a duplex stainless steel subjected to equal channel angular pressing Mater Sci Eng A A551 2012 154 159
265. X. Yang, H. Miura, and T. Sakai Evolution of fine grained microstructure and superplasticity in warm-worked 7075 aluminum alloy Mater Trans JIM 37 1996 1379 1387
266. A. Mogucheva, D. Tagirova, and R. Kaibyshev Superplasticity in a 5024 aluminium alloy processed by severe plastic deformation Mater Sci Forum 735 2013 353 358
267. R. Kaibyshev, D. Zhemchuzhnikova, and A. Mogucheva Effect of Mg content on high strain rate superplasticity of Al-Mg-Sc-Zr alloys subjected to equal-channel angular pressing Mater Sci Forum 735 2013 265 270
268. R. Kaibyshev, D. Tagirov, and A. Mogucheva Cost-affordable technique involving equal channel angular pressing for the manufacturing of ultrafine grained sheets of an Al-Li-Mg-Sc alloy Adv Eng Mater 12 2010 735 739
269. M. Shagiev, Y. Motohashi, F. Musin, R. Kaibyshev, and G. Itoh Superplastic response of an advanced Al-Li-Mg-Cu-Sc alloy subjected to intense plastic deformation Mater Trans 44 2003 1698 1701
270. A. Vinogradov, T. Ishida, K. Kitagawa, and V.I. Kopylov Effect of strain path on structure and mechanical behavior of ultrafine grain Cu-Cr alloy produced by equal-channel angular pressing Acta Mater 53 2005 2181 2192
271. C.Z. Xu, Q.J. Wang, M.S. Zheng, J.W. Zhu, J.D. Li, and M.Q. Huang Microstructure and properties of ultra-fine grain Cu-Cr alloy prepared by equal-channel angular pressing Mater Sci Eng A A459 2007 303 308
272. S.V. Dobatkin, V.F. Terent'ev, W. Skrotzki, O.V. Rybalchenko, M.N. Pankova, and D.V. Prosvirin Structure and fatigue properties of 08Kh18N10T steel after equal-channel angular pressing and heating Russ Metall (Metally) 2012 2012 954 962
273. V.V. Stolyarov, R.Z. Valiev, and Y.T. Zhu Enhanced low-temperature impact toughness of nanostructured Ti Appl Phys Lett 88 2006 art.No.041905
274. Y. Kimura, T. Inoue, F. Yin, and K. Tsuzaki Inverse temperature dependence of toughness in an ultrafine grain-structure steel Science 320 2008 1057 1060
275. S.V. Divinski, G. Wilde, E. Rabkin, and Y. Estrin Ultra-fast atomic transport in severely deformed materials - a pathway to applications? Adv Eng Mater 12 2010 779 785
276. S.V. Divinski, G. Reglitz, H. Rosner, Y. Estrin, and G. Wilde Ultra-fast diffusion channels in pure Ni severely deformed by equal-channel angular pressing Acta Mater 59 2011 1974 1985
277. H. Ferkel, M. Glatzer, Y. Estrin, and R.Z. Valiev RF plasma nitriding of a severely deformed high alloyed steel Scripta Mater 46 2002 623 628
278. G. Salishchev, S. Zherebtsov, S. Malysheva, A. Smyslov, E. Saphin, and N. Izmaylova Mechanical properties of Ti-6Al-4V titanium alloy with submicrocrystalline structure produced by multiaxial forging Mater Sci Forum 584-586 2008 783 788
279. A. Takayama, X. Yang, H. Miura, and T. Sakai Continuous static recrystallization of ultrafine grained copper processed by multi-directional forging Mater Sci Eng A 478 2008 221 228
280. F.J. Humphreys A unified theory of recovery, recrystallization and grain growth of cellular microstuctures-1. The basic model Acta Mater 45 1997 4231 4240
281. V.Y. Gertsman, R. Birringer, R.Z. Valiev, and H. Gleiter On the structure and strength of ultrafine-grained copper produced by severe plastic deformation Scripta Mater 30 1994 229 234
282. X. Yang, Y. Zhu, H. Miura, and T. Sakai Static recrystallization behavior of hot-deformed magnesium alloy AZ31 during isothermal annealing Trans Nonferrous Met Soc China 20 2010 1269 1274
283. X. Yang, H. Miura, and T. Sakai Isochronal annealing behavior of magnesium alloy AZ31 after hot deformation Mater Trans 46 2005 2981 2987
284. A. Korznikov, O. Dimitrov, and G. Korznikova Thermal evolution of the structure of ultra fine grained materials produced by severe plastic deformation Ann Chim Sci Mater 21 1996 443 460
285. H. Jazaeri, and F.J. Humphreys The transition from discontinuous to continuous recrystallization in some aluminum alloys II - annealing behaviour Acta Mater 52 2004 3251 3262
286. T. Sakai, and Z. Xu Kinetics of static grain growth in dynamically recrystallized copper polycrystals with different purities Mater Trans JIM 37 1996 1422 1430
287. Z. Xu, and T. Sakai Kinetics of recovery and recrystallization in dynamically recrystallized austenite Mater Trans JIM 32 1991 174 180
288. T. Sakai, M. Ohashi, K. Chiba, and J.J. Jonas Recovery and recrystallization of polycrystalline nickel after hot working Acta Metall 36 1988 1781 1790
289. R.A.P. Djaic, and J.J. Jonas Recrystallization of high-carbon steel between intervals of high-temperature deformation Metall Trans 4 1973 621 624
290. R.A. Petkovic, M.J. Luton, and J.J. Jonas Recovery and recrystallization of polycrystalline copper after hot working Acta Metall 27 1979 1633 1648
291. S. Kato, A. Mori, H. Miura, and T. Sakai Ferrite refinement through transformation from a dynamically recrystallized IF steel E.J. Palmiere, M. Mahfoul, C. Pinna, Thermomechanical processing: mechanics, microstructure and control 2003 The Univ. Sheffield UK 17 21