Synthesis of nanostructured materials by mechanical milling: Problems and opportunities

Nanostructured Materials

Volumn 9, Issue 1-8, 1997, Pages 13-22

  Koch, C C ^a  

^a North Carolina State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 0347841576     PISSN: 09659773     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0965-9773(97)00014-7     Document Type: Article

References (56)

1. R. Birringer, H. Gleiter, H. P. Klein, and P. Marquardt Phys. Lett. A. 102, 356 (1984).
2. A. Inoue, Mater. Sci. Engg. A179/A180, 57 (1994).
3. R. O. Hughes, S. D. Smith, C. S. Pande, H. R. Johnson, and R. W. Armstrong, Scripta Metall. 20, 93 (1986).
4. Z. G. Li and D. J. Smith, Appl. Phys. Lett. 55, 919 (1989).
5. K. Lu, W. D. Wei, and J. T. Wang, Scr. Metall. Mater. 24, 2319 (1995).
6. B. H. Kear and P. R. Strutt, Nano-Structured Mater. 6, 227 (1995).
7. C. C. Koch, Nano-Structured Mater. 2, 109 (1993).
8. H. J. Fecht in "Nanophase Materials", G. C. Hadjipanayis and R. W. Siegel eds., Kluwer Acad. Pub. 125 (1994).
9. H. J. Fecht, Nano-Structured Materials, 6, 33 (1995).
10. E. Hellstern, H. J. Fecht, C. Garland, and W. L. Johnson, J. Appl. Phys. 65, 305 (1989).
11. E. Hellstern, H. J. Fecht, C. Garland, and W. L. Johnson, Mat. Res. Soc. Symp. Proc. 132, 137 (1989).
12. J. Eckert, J. C. Holzer, C. E. Krill, III, and W. L. Johnson, J. Mater. Res. 7, 1751 (1992).
13. E. Gaffet and M. Harmelin, J. Less. Comm. Met. 157, 201 (1990).
14. T. D. Shen, C. C. Koch, T. L. McCormick, R. J. Nemanich, J. Y. Huang, and J. G. Huang, J. Mater. Res. 10, 139 (1995).
15. T. D. Shen, W. Q. Ge, K. Y. Wang, M. X. Quan, J. T. Wang, W. D. Wei, and C. C. Koch, Nano-Structured Mater. 7, 393 (1996).
16. G. W. Nieman and J. R. Weertman, in "Morris E. Fine Symposium", ed. P. K. Liaw et al, TMS (1991) pp. 243-250.
17. D. Oleszak and P. H. Shingu, J. Appl. Phys. 79, 2975 (1996).
18. G. K. Williamson and W. H. Hall, Acta Metall. 1, 22 (1953).
19. K. Yamada and C. C. Koch, J. Mater. Res. 8, 1317 (1993).
20. G. Martin and E. Gaffet, J. Phys. France (Colloques) 51, C4-71 (1990).
21. N. Burgio, A. Iasonna, M. Magini, S. Martelli, F. Padella, Nuovo Cimento, 13, 459 (1991).
22. P. Pochet, L. Chaffron, and G. Martin, Mater. Sci. Forum, 179-181, 91 (1995).
23. V. A. Pavlov, O. V. Antonova, A. P. Adakhovskiy, A. A. Kuranov, V. M. Alya'ev, and A. I. Dergagin, Phys. Met. Metall. 58, 158 (1984).
24. V. A. Pavlov, Phys. Met. Metall. 59, 1 (1985).
25. M. Hatherly and A. S. Malin, Scripta Met. 18, 449 (1984).
26. D. A. Rigney, L. H. Chen, M. G. S. Naylor, and A. R. Rosenfield, Wear, 100, 195 (1984).
27. D. Turley, J. Inst. Metals, 99, 271 (1971).
28. R. Z. Valiev, A. V. Kornikov, and R. R. Mulyukov, Mater. Sci. Eng. A168, 141 (1993).
29. R. Z. Valiev, Nano-Structured Mater. 6, 73 (1995).
30. J. Languillaume, F. Chmelik, G. Kapelski, F. Bordeaux, A. A. Nazarov, G. Canova, C. Esling, R. Z. Valiev, and B. Bandelet, Acta. Metall. Mater. 41, 2953 (1993).
31. A. Belyakov, and R. Kaibyshev, Nano-Structured Mater. 6, 893 (1995).
32. R. W. Cahn, "Recovery and Recrystallization", Chapt. 25 in Physical Metallurgy, 3rd edition, ed. R. W. Cahn and P. Haasen, Elsevier Science Pub. (1983) p. 1613.
33. T. D. Shen and C. C. Koch, Materials Science Forum, 179-181, 17 (1995).
34. D. K. Pathak, PhD. Dissertation, North Carolina State University, 1995.
35. T. G. Nieb and J. Wadsworth, Scripta Metall. Mater. 25, 955 (1991).
36. J. Eckert, J. C. Holzer, C. E. Krill, III, and W. L. Johnson, J. Mater. Res. 7, 1980 (1992).
37. T. D. Shen and C. C. Koch, Acta Mater. 44, 753 (1996).
38. M. L. Trudeau, R. Schulz, L. Zaluski, S. Hosatte, D. H. Ryan, C. B. Doner, P. Tessier, J. D. Strom-Olsen, and A. Van Neste, Materials Science Forum, 88-90, 537 (1992).
39. W. W. Milligan, S. A. Hackney, M. Ke, and E. C. Aifantis, Nano-Structured Mater. 2, 269 (1993).
40. M. Ke, S. A. Hackney, W. W. Milligan, and E. C. Aifantis, Nano-Structured Mater. 5, 689 (1995).
41. S. A. Hackney, M. Ke, W. W. Milligan, and E. C. Aifantis, in "Processing and Properties of Nanocrystalline Materials", ed. C. Suryanarayana, J. Singh, and F. H. Froes, TMS, 1996, pp. 421-426.
42. T. Klassen, M. Oehring, and R. Bormann, J. Mater. Res. 9, 47 (1994).
43. U. Mizutani and C. H. Lee, J. Mat. Sci. 25, 399 (1990).
44. J. Eckert, L. Schultz, and E. Hellstem, J. Appl. Phys. 64, 3224 (1988).
45. M. L. Trudeau, R. Schulz, D. Dussault, and A. Van Neste, Phys. Rev. Lett. 64, 99 (1990).
46. M. L. Trudeau, J. Y. Huot, R. Schulz, D. Dussault, A. Van Neste, and G. L'Espérance, Phys. Rev. B 45, 4626 (1992).
47. M. L. Trudeau, L. Dignard-Bailey, R. Schulz, D. Dussault, and A. Van Neste, Nano-Struct. Mater. 2, 361 (1993).
48. B. Huang, R. J. Perez, P. J. Crawford, A. A. Sharif, S. R. Nutt, and E. J. Lavernia, Nano-Struct. Mater. 5, 545 (1995).
49. M. L. Trudeau, Appl. Phys. Lett. 64, 3661 (1994).
50. H. Chen, Y. He, G. J. Shiflet, and S. J. Poon, Nature, 367, 541 (1994).
51. J. Mishurda, C. Suryanarayana, and F. H. Froes, University of Idaho, 1994, unpublished results.
52. P. Goodwin and M. Ward-Close, "Mechanical Alloying of Ti-Based Materials", ISMANAM-96, Rome, Italy, May 20-24, 1996, to be published in the proceedings.
53. C. Suryanarayana, G. E. Korth, and F. H. Froes, in "Processing and Properties of Nanocrystalline Materials", ed. C. Suryanarayana, J. Singh, and F. H. Froes, TMS, Warrendale, Penn. (1996) pp. 291-302.
54. G. E. Korth and R. L. Williamson, Metall. Mater. Trans. A, 26A, 2571 (1995).
55. M. Jain and T. Christman, Acta Metall. Mater. 42, 1901 (1994).
56. S. Enzo, M. Sampoli, G. Cocco, L. Schiffini, and L. Battezzati, Phil. Mag. B 59, 169 (1989).