Knowledge-based technologies for future factory engineering and control

Studies in Computational Intelligence

Volumn 472, Issue , 2013, Pages 355-374

  Legat, Christoph ^a   Lamparter, Steffen ^a   Vogel Heuser, Birgit ^b  

^a SIEMENS AG   (Germany)

^b TECHNICAL UNIVERSITY OF MUNICH   (Germany)

Author keywords

Diagnostics; Disruption detection; Flexible field control software; Future production systems; Knowledge based systems; Production control; Rescheduling

Indexed keywords

EID: 84881074956     PISSN: 1860949X     EISSN: None     Source Type: Book Series    
DOI: 10.1007/978-3-642-35852-4_23     Document Type: Conference Paper

References (126)

1. European Commission: MANUFUTURE strategic research agenda-assuring the future of manufacturing in Europe (September 2006)
2. European Factory of the Future Research Association: Factories of the future PPP FoF 2020 roadmap (2012) Consultation Document
3. Geisberger, E., Cengarle, M. V., Keil, P., Niehaus, J., Thiel, C., Thönnissen-Fries, H. J.: Cyber-physical systems-driving force for innovation in mobility, health, energy and production (December 2011) Position Paper
4. Russell, R., Hall, D.: Manufacturing the future: Federal priorities for manufacturing R&D. National Science and Technology Council (March 2008) Report of the Interagency Working Group on Manufacturing R&D Committee on Technology
5. Vogel-Heuser, B., Kegel, G., Bender, K., Wucherer, K.: Global information architecture for industrial automation. ATP International-Automation Technology in Practice 51(1), 108-115 (2009)
6. Westkämper, E.: Adaptable production structures. In: Manufacturing Technologies for Machines of the Future (21st Century Technologies), pp. 87-120. Springer (2003)
7. Chryssolouris, G.: Manufacturing Systems: Theory and Practice, 2nd edn. Mechanical Engineering Series. Springer (2006)
8. Da Silveira, G., Borenstein, D., Fogliatto, F.: Mass customization: Literature review and research directions. Int. J. Prod. Econ. 72(1), 1-13 (2001)
9. El Maraghy, H. A., Wiendahl, H. P.: Changeability - an introduction. In: Changeable and Reconfigurable Manufacturing Systems. Advanced Manufacturing, pp. 3-24. Springer (2009)
10. Wiendahl, H. P., El Maraghy, H. A., Nyhuis, P., Zäh, M. F., Wiendahl, H. H., Duffie, N. A., Brieke, M.: Changeable manufacturing- classification, design and operation. Annuals of the CIRP-Manufacturing Technology 56(2), 783-809 (2007)
11. European Commission: ICT and energy efficiency-the case for manufacturing (February 2009) Recommendations of the Consultation Group
12. European Technology Platform SmartGrids: Smartgrids SRA 2035 strategic research agenda-update of the smartgrids SRA 2007 for the needs by the year 2035 (March 2012) European Commission
13. Tasso, C., Arantes E Oliveira, E. R. (eds.): Development of Knowledge-Based Systems for Engineering. CISM International Centre for Mechanical Sciences, vol. 333. Springer (1998)
14. Legat, C., Neidig, J., Roshchin, M.: Model-based knowledge extraction for automated monitoring and control. In: Proceedings of the 18th IFAC World Congress, Milan (2011)
15. Carrillo, J., Franza, R.: Investing in product development and production capabilities: The crucial linkage between time-to-market and ramp-up time. Eur. J. Oper. Res. 171(2), 536-556 (2006)
16. Bracht, U., Masurat, T.: The digital factory between vision and reality. Comput. Ind. 56(4), 325-333 (2005)
17. Chryssolouris, G., Mavrikios, D., Papakostas, N., Mourtzis, D., Michalos, G., Georgoulias, K.: Digital manufacturing: history, perspectives, and outlook. Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 223(5), 451-462 (2009)
18. Rocca, G.: Knowledge based engineering: Between AI and CAD. Review of a language based technology to support engineering design. Adv. Eng. Inform. (2012)
19. Gaonkar, R., Viswanadham, N.: A conceptual and analytical framework for the management of risk in supply chains. In: IEEE Int. Conf. on Robotics and Automation, pp. 2699-2704 (2004)
20. Straube, F., Vogeler, S., Bensel, P.: RFID-based supply chain event management. RFID Eurasia, 1-5 (2007)
21. Jüttner, U.: Supply chain risk management: Understanding the business requirements from a practitioner perspective. Int. J. Logist. Manag. 16(1), 120-141 (2005)
22. Perrow, C.: Normal Accidents. Basic Books, New York (1984)
23. Wagner, S. M., Bode, C.: An empirical investigation into supply chain vulnerability. J. Purch. Supply Manag. 12(6), 301-312 (2006)
24. Bose, I., Pal, R.: Auto-ID: Managing Anything, Anywhere, Anytime in the Supply Chain. Comm. of ACM 48(8), 100-106 (2005)
25. Gaukler, G.: Item-level RFID in a retail supply chain with stock-out-based substitution. IEEE Trans. Ind. Informat. 7(2), 362-370 (2011)
26. Ngai, E., Moon, K. K., Riggins, F. J., Yi, C.: RFID research: An academic literature review (1995-2005) and future research directions. Int. J. Prod. Econ. 112(2), 510-520 (2008)
27. EPCglobal: EPC Information Services (EPCIS) Version 1.0.1 Specification (September 2007)
28. Guarino, N.: Formal ontology, conceptual analysis and knowledge representation. Int. J. Hum.-Comput. St. 43 (5/6), 625-640 (1995)
29. Lamparter, S., Legat, C., Lepratti, R., Scharnagl, J., Jordan, L.: Event-based reactive production order scheduling for manufacturing execution systems. In: 18th IFAC World Congress, Milan (2011)
30. Luckham, D. C., Vera, J.: An event-based architecture definition language. IEEE Trans. Softw. Eng. 21(9), 717-734 (1995)
31. Wu, E., Diao, Y., Rizvi, S.: High-performance complex event processing over streams. In: 2006 ACM SIGMOD Int. Conf. on Management of Data, pp. 407-418 (2006)
32. Wang, F., Liu, S., Liu, P.: Complex RFID event processing. VLDB Journal 18(4), 913-931 (2009)
33. Isermann, R.: Fault-Diagnosis Systems: An Introduction from Fault Detection to Fault Tolerance. Springer (2005)
34. Ligeza, A.: Selected methods of knowledge engineering in systems diagnosis. In: Korbicz, J., Koscielny, J., Kowalczuk, Z., Cholewa, W. (eds.) Fault Diagnosis-Models, Artificial Intelligence, Applications. Springer (2004)
35. Debouk, R., Lafortune, S., Teneketzis, D.: Coordinated decentralized protocols for failure diagnosis of discrete event systems. Discrete Event Dynamic Systems: Theory and Applications 10, 33-86 (2000)
36. Ferrarini, L., Allevi, M., Dedè, A.: A methodology for fault isolation and identification in automated equipments. In: 9th IEEE Int. Conf. on Industrial Informatics, Caparica, Lisbon, Portugal, July 26-29, pp. 157-162 (2011)
37. Flad, S., Struss, P., Voigt, T.: Automatic detection of critical points in bottling plants with a model-based diagnosis algorithm. J. I. Brewing 116(4), 354-359 (2010)
38. Lo, C. H., Wong, Y., Rad, A.: Intelligent system for process supervision and fault diagnosis in dynamic physical systems. IEEE Trans. Ind. Electron. 53(2), 581-592 (2006)
39. Lo, C. H., Fung, E. H. K., Wong, Y. K.: Intelligent automatic fault detection for actuator failures in aircraft. IEEE Trans. Ind. Information 5(1), 50-55 (2009)
40. Baader, F., Calvanese, D., McGuinness, D., Nardi, D., Patel-Schneider, P.: The Description Logic Handbook: Theory, Implementation and Applications. Cambridge University Press, New York (2003)
41. Merdan, M., Vallee, M., Lepuschitz, W., Zoitl, A.: Monitoring and diagnostics of industrial systems using automation agents. Int. J. Prod. Res. 49(5), 1497-1509 (2011)
42. Geramifard, O., Xu, J. X., Zhou, J. H., Li, X.: A physically segmented hidden Markov model approach for continuous tool condition monitoring: Diagnostics & Prognostics. IEEE Trans. Ind. Informat. (2012)
43. Jirkovsky, V., Kadera, P., Obitko, M., Vrba, P.: Diagnostics of distributed intelligent control systems: Reasoning using ontologies and hidden Markov models. In: 14th IFAC Symposium on Information Control Problems in Manufacturing, INCOM 2012 (2012)
44. McIlraith, S. A.: Logic-based abductive inference. Technical Report KSL-98-19, Knowledge Systems Laboratory, University of Toronto (July 6, 1998)
45. Hubauer, T., Lamparter, S., Pirker, M.: Automata-based abduction for tractable diagnosis. In: 23rd International Workshop on Description Logics, DL 2010 (2010)
46. Hubauer, T. M., Lamparter, S., Pirker, M.: Relaxed abduction: Robust information interpretation for incomplete models. In: DL Home 24th Int. Workshop on Description Logics. CEUR Workshop Proceedings, vol. 745 (2011)
47. Hubauer, T. M., Grimm, S., Lamparter, S., Roshchin, M.: A diagnostics framework based on abductive description logic reasoning. In: 2012 IEEE Int. Conf. on Industrial Technology (2012)
48. Seitz, C., Legat, C., Neidig, J.: Querying sensor data for semantic product memories. In: Schneider, M., Kröner, A., Alvarado, J. E., Higuera, A. G., Augusto, J., Cook, D., Ikonen, V., Cech, P., Mikulecky, P., Kameas, A., Callaghan, V. (eds.) 5th Int. Conf. on Intelligent Environments Workshops, pp. 51-57 (2009)
49. Legat, C., Seitz, C., Vogel-Heuser, B.: Unified sensor data provisioning with semantic technologies. In: 16th IEEE Int. Conf. on Emerging Technologies and Factory Automation (2011)
50. Meyer, G. G., Främling, K., Holmström, J.: Intelligent products: A survey. Comput. Ind. 60(3), 137-148 (2009)
51. Seitz, C., Legat, C., Liu, Z.: Flexible manufacturing control with autonomous product memories. In: 2010 IEEE Int. Conf. on Emerging Technology and Factory Automation, Bilbao, Spain (2010)
52. Hubauer, T. M., Legat, C., Seitz, C.: Empowering adaptive manufacturing with interactive diagnostics: A multi-agent approach. In: 9th Int. Conf. on Practical Applications of Agents and Multi-Agent Systems, pp. 47-56 (2011)
53. Seitz, C., Schönfelder, R.: Rule-Based OWL Reasoning for Specific Embedded Devices. In: Aroyo, L., Welty, C., Alani, H., Taylor, J., Bernstein, A., Kagal, L., Noy, N., Blomqvist, E. (eds.) ISWC 2011, Part II. LNCS, vol. 7032, pp. 237-252. Springer, Heidelberg (2011)
54. Seitz, C., Lamparter, S., Schöler, T., Pirker, M.: Embedded rule-based reasoning for digital product memories. In: 2010 AAAI Spring Symposium (2010)
55. Seitz, C., Fischer, J. G., Legat, C.: Flexible product-life-cycle management with digital product memories. In: IFIP WG5.1 7th Int. Product Lifecycle Management Conference, Bremen, Germany. IFIP (July 2010)
56. Legat, C., Hubauer, T. M., Seitz, C.: Integrated diagnosis for adaptive service-oriented manufacturing control with autonomous products. In: 2011 Int. Conf. on Industrial Engineering and Systems Management (2011)
57. International Electronic Commission: IEC 62264-Enterprise-control system integration (2003)
58. Ghallab, M., Nau, D. S., Traverso, P.: Automated Planning: Theory and Practice. Morgan Kaufmann (2004)
59. Pinedo, M.: Scheduling: theory, algorithms, and systems. Springer (2012)
60. Hillier, F. S., Lieberman, G. J.: Introduction to Operations Research, 7th edn. McGraw-Hill College (2001)
61. Barbati, M., Bruno, G., Genovese, A.: Applications of agent-based models for optimization problems: A literature review. Expert Syst. Appl. 39(5), 6020-6028 (2011)
62. Onori, M., Barata, J.: Evolvable production systems: new domains within mechatronic production equipment. In: 2010 IEEE Int. Symposium on Industrial Electronics, Bari, July 4-7, pp. 2653-2657 (2010)
63. Frei, R., Serugendo, G. D. M.: Self-organizing assembly systems. IEEE Trans. Syst., Man, Cybern. C, Appl. Rev. 41(6), 885-897 (2011)
64. Chrwan-Jyh, H.: Evaluating the impact of operating environments on mrp system nervousness. Int. J. Prod. Res. 27(7), 1115-1135 (1989)
65. Li, Z., Ierapetritou, M.: Process scheduling under uncertainty: Review and challenges. Computers & Chemical Engineering 32(4), 715-727 (2001)
66. Ouelhadj, D., Petrovic, S.: A survey of dynamic scheduling in manufacturing systems. J. Sched. 12(4), 417-431 (2009)
67. Vieira, G., Herrmann, J., Lin, E.: Rescheduling manufacturing systems: a framework of strategies, policies, and methods. J. Sched. 6(1), 39-62 (2003)
68. Reisman, A., Kumar, A., Motwani, J.: Flowshop scheduling/sequencing research: a statistical review of the literature, 1952-1994. IEEE Trans. Eng. Management 44(3), 316-329 (2003)
69. Lawler, E., Lenstra, J., Kan, A., Shmoys, D.: Sequencing and scheduling: Algorithms and complexity. Handbooks in Operations Research and Management Science 4, 445-522 (1993)
70. Karageorgos, A., Mehandjiev, N., Weichhart, G., Hämmerle, A.: Agent-based optimisation of logistics and production planning. Eng. Appl. Artif. Intel. 16(4), 335-348 (2003)
71. Shen, W., Hao, Q., Yoon, H., Norrie, D.: Applications of agent-based systems in intelligent manufacturing: An updated review. Advanced Engineering Information 20(4), 415-431 (2006)
72. Leitão, P., Restivo, F.: A holonic approach to dynamic manufacturing scheduling. Robotics and Computer-Integrated Manufacturing 24(5), 625-634 (2008)
73. Lüder, A., Klostermeyer, A., Peschke, J., Bratoukhine, A., Sauter, T.: Distributed automation: Pabadis versus hms. IEEE Trans. Ind. Informat. 1(1), 31-38 (2005)
74. Trentesaux, D.: Distributed control of production systems. Eng. Appl. Artif. Intel. 22(7), 971-978 (2009)
75. Leitão, P.: Self-organization in manufacturing systems: challenges and opportunities. In: Second IEEE International Conference on Self-Adaptive and Self-Organizing Systems Workshops, SASOW 2008, pp. 174-179. IEEE (2008)
76. Legat, C., Heinecke, G.: Dynamic reconfiguration of manufacturing systems using its control capabilities. In: 21st Int. Conf. on Production Research (2011)
77. Heinecke, G., Köber, J., Lepratti, R., Lamparter, S., Kunz, A.: Event-driven order rescheduling model for just-in-sequence deliveries to a mixed-model assembly line. In: Advances in Production Management Systems 2012 International Conference (2012)
78. Heinecke, G., Köber, J., Kunz, A., Lamparter, S.: Modeling the basic cause-effect relationship between supply chain events and performance. In: 3rd Int. Conf. on Dynamics in Logistics (2012)
79. Heinecke, G., Migge, B., Kunz, A., Lamparter, S., Lepratti, R.: Measuring the performancerelated effect of supply chain events on manufacturing operations. In: P&OM World Conference 2012 (2012)
80. Brennan, R., Vrba, P., Tichy, P., Zoitl, A., Sünder, C., Strasser, T., Marik, V.: Developments in dynamic and intelligent reconfiguration of industrial automation. Comput. Ind. 59, 533-547 (2008)
81. Brennan, R. W.: Toward real-time distributed intelligent control: A survey of research themes and applications. IEEE Trans. Syst., Man, Cybern. C, Appl. Rev. 37(5), 744-765 (2007)
82. International Electronic Commission: IEC 61131-3: Programmable Controllers-Part 3: Programming Languages (December 2009)
83. Metzger, M., Polaków, G.: A survey on applications of agent technology in industrial process control. IEEE Trans. Ind. Informat. 7(4), 570-581 (2011)
84. Jammes, F., Smit, H.: Service-oriented paradigms in industrial automation. IEEE Trans. Ind. Informat. 1(1), 62-70 (2005)
85. Vrba, P., Tichy, P., Marik, V., Hall, K. H., Staron, R. J., Maturana, F. P., Kadera, P.: Rockwell automation's holonic and multi-agent control systems compendium. IEEE Trans. Syst., Man, Cybern. C, Appl. Rev. 41(1), 14-30 (2011)
86. Colombo, A. W., Schoop, R., Neubert, R.: An agent-based intelligent control platform for industrial holonic manufacturing systems. IEEE Trans. Ind. Electron. 53(1), 322-337 (2006)
87. Borangiu, T., Gilbert, P., Ivanescu, N. A., Rosu, A.: An implementation framework for holonic manufacturing control with multiple robot-vision stations. Eng. Appl. Artif. Intel. 22, 505-521 (2009)
88. Shen, W., Hao, Q., Yoon, H. J., Norrie, D. H.: Applications of agent-based systems in intelligent manufacturing: An updated review. Adv. Eng. Inform. 20(4), 415-431 (2006)
89. Leitao, P.: Agent-based distributed manufacturing control: A state-of-the-art survey. Eng. Appl. Artif. Intel. 22(7), 979-991 (2009)
90. Vrba, P., Marik, V.: Capabilities of dynamic reconfiguration of multiagent-based industrial control systems. IEEE Trans. Syst., Man, Cybern. A, Syst., Humans 40(2), 213-223 (2010)
91. International Electronic Commission: IEC 61499-Function Blocks for industrial control systems (June 2005)
92. Lepuschitz, W., Zoitl, A., Vallée, M., Merdan, M.: Toward self-reconfiguration of manufacturing systems using automation agents. IEEE Trans. Syst., Man, Cybern. C, Appl. Rev. 41(1), 52-69 (2011)
93. Black, G., Vyatkin, V.: Intelligent component-based automation of baggage handling systems with IEC 61499. IEEE Trans. Autom. Sci. Eng. 7(2), 337-351 (2010)
94. Romanenko, A., Santos, L. O., Afonso, P. A.: Application of agent technology concepts to the design of a fault-tolerant control system. Control Eng. Pract. 15(4), 459-469 (2007)
95. Wannagat, A., Vogel-Heuser, B.: Increasing flexibility and availability of manufacturing systems-dynamic reconfiguration of automation software at runtime on sensor faults. In: 9th IFAC Workshop on Intelligent Manufacturing Systems (2008)
96. Wannagat, A., Vogel-Heuser, B.: Agent oriented software-development for networked embedded systems with real time and dependability requirements the domain of automation. In: Proceedings of the 17th IFAC World Congress, Seoul (2008)
97. De Souza, L. M. S., Spiess, P., Guinard, D., Köhler, M., Karnouskos, S., Savio, D.: SOCRADES: A Web Service Based Shop Floor Integration Infrastructure. In: Floerkemeier, C., Langheinrich, M., Fleisch, E., Mattern, F., Sarma, S. E. (eds.) IOT 2008. LNCS, vol. 4952, pp. 50-67. Springer, Heidelberg (2008)
98. Cândido, G., Colombo, A. W., Barata, J., Jammes, F.: Service-oriented infrastructure to support the deployment of evolvable production systems. IEEE Trans. Ind. Informat. 7(4), 759-767 (2011)
99. Zühlke, D., Ollinger, L.: Agile Automation Systems Based on Cyber-Physical Systems and Service-Oriented Architectures. In: Lee, G. (ed.) ICAR 2011. LNEE, vol. 122, pp. 567-574. Springer, Heidelberg (2011)
100. Legat, C., Schütz, D., Vogel-Heuser, B.: Automatic generation of field control strategies for supporting (re-) engineering of manufacturing systems. In: 14th IFAC Symposium on Information Control Problems in Manufacturing INCOM 2012, Bucharest (2012)
101. Schäfer, C.: On the modularity of manufacturing systems. IEEE Industrial Electronics Magazine 1(3), 20-27
102. Jazdi, N., Maga, C., Göhner, P.: Reusable models in industrial automation: experiences in defining appropriate levels of granularity. In: Proc. of the 18th IFAC World Congress, pp. 9145-9150 (2011)
103. Koren, Y., Heisel, U., Jovane, F., Moriwaki, T., Pritschow, G., Ulsoy, G., Van Brussel, H.: Reconfigurable manufacturing systems. CIRP Annals-Manufacturing Technology 48(2), 527-540 (1999)
104. Feldmann, S., Fuchs, J., Vogel-Heuser, B.: Modularity, variant and version management in plant automation-future challenges and state of the art. In: Design Conference, Dubrovnik, Croatia, pp. 1689-1698 (2012)
105. Rösch, S., Schütz, D., Bayrak, G., Vogel-Heuser, B.: Supporting integrated development of closed-loop PLC control software for production systems. In: 38th Conference of the IEEE Industrial Electronics Society, IECON (2012)
106. Lüder, A., Estevez, E., Hundt, L., Marcos, M.: Automatic transformation of logic models within engineering of embedded mechatronic units. Int. J. Adv. Manuf. Tech. 54(9-12), 1077-1039 (2011)
107. Thramboulidis, K.: The 3+1 SysML view-model in model integrated mechatronics. Journal of Software Engineering and Applications 3, 109-118 (2010)
108. Secchi, C., Bonfe, M., Fantuzzi, C.: On the use of UML for modelling mechatronic systems. IEEE Trans. Autom. Sci. Eng. 4(1), 105-113 (2007)
109. Bassi, L., Secchi, C., Bonfé, M., Fantuzzi, C.: A SysML-based methodology for manufacturing machinery modelling and design. IEEE/ASME Trans. Mechatronics 16(6), 1049-1062 (2011)
110. Mendes, J. M., Leitao, P., Colombo, A. W., Restivo, F.: High-level Petri nets for the process description and control in service-oriented manufacturing systems. Int. J. Prod. Res. 50(6), 1650-1665 (2012)
111. Estevez, E., Marcos, M.: Model based validation of industrial control systems. IEEE Trans. Ind. Informat. 8(2), 302-310 (2012)
112. Soliman, D., Thramboulidis, K., Frey, G.: Function block diagram for timed automata transformation based on formal models. In: 14th IFAC Symposium on Information Control Problems in Manufacturing, vol. 14, pp. 1653-1659 (2012)
113. Witsch, D., Vogel-Heuser, B.: PLC-state charts: An approach to integrate UML-state charts in open-loop control engineering-aspects on behavioural semantics and modelchecking. In: 18th IFAC World Congress (2011)
114. Vyatkin, V., Hanisch, H. M., Pang, C., Yang, C. H.: Closed-loop modelling in future automation system engineering and validation. IEEE Trans. Syst., Man, Cybern. C, Appl. Rev. 39(1), 17-28 (2009)
115. Sünder, C., Vyatkin, V., Zoitl, A.: Formal validation of downtimeless system evolution in embedded automation controllers. ACM T. Embed. Comput. S. (2011)
116. Estevez, E., Marcos, M., Orive, D.: Automatic generation of PLC automation projects from component-based models. Int. J. Adv. Manuf. Tech. 35(5-6), 527-540 (2007)
117. Vogel-Heuser, B., Witsch, D., Katzke, U.: Automatic code generation from a UML model to IEC 61131-3 and system configuration tools. In: International Conference on Control and Automation, ICCA 2005, vol. 2, pp. 1034-1039. IEEE (2005)
118. Brecher, C., Kempf, T., Herfs, W.: Cognitive control technology for a self-optimizing robot based assembly cell. In: ASME 2008 Int. Design Engineering Technical Conf. and Computers and Information in Engineering Conf., pp. 1423-1431 (August 2008)
119. Mosemann, H., Wahl, F. M.: Automatic decomposition of planned assembly sequences into skill primitives. IEEE Trans. Robot. Autom. 17(5), 709-717 (2001)
120. Bengtsson, K., Bergegard, P., Thorstensson, C., Lennartson, B., Akesson, K., Yuan, C., Miremadi, S., Falkman, P.: Sequence planning using multiple and coordinated sequences of operations. IEEE Trans. Autom. Sci. Eng. 9(2), 308-318 (2012)
121. Martinez Lastra, J. L., Delamer, I. M.: Ontologies for Production Automation. In: Dillon, T. S., Chang, E., Meersman, R., Sycara, K. (eds.) Advances in Web Semantics I. LNCS, vol. 4891, pp. 276-289. Springer, Heidelberg (2009)
122. Orozco, O. J. L., Martinez Lastra, J. L.: Using semantic web technologies to describe automation objects. International Journal of Manufacturing Research 1(4), 482-503 (2007)
123. Dibowski, H., Kabitzsch, K.: Ontology-based device descriptions and triple store based device repository for automation devices. In: 2010 IEEE Conf. on Emerging Technologies and Factory Automation. IEEE (2010)
124. Lin, H., Harding, J., Shahbaz, M.: Manufacturing system engineering ontology for semantic interoperability across extended project teams. Int. Journal of Production Research 42(24), 5099-5118 (2004)
125. Obermeier, M., Braun, S., Sommer, K., Vogel-Heuser, B.: Fundamental Aspects Concerning the Usability Evaluation of Model-Driven Object Oriented Programming Approaches in Machine and Plant Automation. In: Marcus, A. (ed.) HCII 2011 and DUXU 2011, Part II. LNCS, vol. 6770, pp. 497-506. Springer, Heidelberg (2011)
126. Schütz, D., Legat, C., Vogel-Heuser, B.: On modelling the state-space of manufacturing systems using UML. In: Proc. of 14th IFAC Symposium on Information Control Problems in Manufacturing, Bucharest, IFAC PapersOnLine (2012)