Thermally induced fracture for core-veneered dental ceramic structures

Acta Biomaterialia

Volumn 9, Issue 9, 2013, Pages 8394-8402

  Zhang, Zhongpu ^a   Guazzato, Massimiliano ^b   Sornsuwan, Tanapon ^b   Scherrer, Susanne S ^c   Rungsiyakull, Chaiy ^a   Li, Wei ^a   Swain, Michael V ^b   Li, Qing ^a  

^a UNIVERSITY OF SYDNEY   (Australia)

^b UNIVERSITY OF SYDNEY   (Australia)

^c UNIVERSITY OF GENEVA   (Switzerland)

Author keywords

Bi layered ceramic; Dental prosthesis; Thermal fracture; Thermomechanical; XFEM

Indexed keywords

CERAMIC MATERIALS; COOLING; CRACKS; DENTAL PROSTHESES; FINITE ELEMENT METHOD; FRACTURE; FRACTURE MECHANICS; HEAT TRANSFER COEFFICIENTS; SCANNING ELECTRON MICROSCOPY; VENEERS; ZIRCONIA;

BI-LAYERED CERAMICS; CERAMICS STRUCTURE; COOLING RATES; DENTAL CERAMIC; THERMAL FRACTURE; THERMALLY INDUCED; THERMO-MECHANICAL; THERMO-MECHANICAL ANALYSIS; TRANSIENT THERMAL ANALYSIS; XFEM;

THERMOANALYSIS;

DENTAL CERAMICS; ZIRCONIUM OXIDE;

ARTICLE; COOLING; EXTENDED FINITE ELEMENT METHOD; FINITE ELEMENT ANALYSIS; HEAT TRANSFER; IN VITRO STUDY; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPY; TEMPERATURE; THERMAL ANALYSIS; TOOTH CROWN;

EID: 84880918860     PISSN: 17427061     EISSN: 18787568     Source Type: Journal    
DOI: 10.1016/j.actbio.2013.05.009     Document Type: Article

References (65)

1. G. Maccauro, and C. Piconi Zirconia as a ceramic biomaterial Biomaterials 20 1 1999 1 25 (Pubitemid 29002541)
2. M. Guazzato, K. Proos, L. Quach, and M.V. Swain Strength, reliabilty and mode of fracture of bilayered procelain/zirconia (Y-TZP) dental ceramics Biomaterials 25 20 2004 5045 5052 (Pubitemid 38520834)
3. S.D. Heintze, and V. Rousson Survival of zirconia- and metal-supported fixed dental prostheses: a systematic review Int J Prosthondont 23 6 2010 493 502
4. J.S. Schley, N. Heussen, S. Reich, J. Fischer, K. Haselhuhn, and S. Wolfart Survival probability of zirconia-based fixed dental prostheses up to 5 years: a systematic review of the literature Eur J Oral Sci 118 5 2010 443 450
5. B.E. Pjetursson, I. Sailer, M. Zwahlen, and C.H. Hämmerle A systematic review of the survival and complication rates of all-ceramic and metal-ceramic reconstructions after an observation period of at least 3 years. Part I: Single crowns Clin Oral Implants Res 18 Suppl 3 2007 73 85
6. P. Odman, and B. Andersson Procera AllCeram crowns followed for 5-10.5 years: a prospective clinical study Int J Prosthodont 14 6 2001 504 509 (Pubitemid 33671976)
7. I. Sailer, A. Feher, F. Filser, L.J. Gauckler, H. Luthy, and C.H.F. Hammerle Five-year clinical results of zirconia frameworks for posterior fixed partial dentures Int J Prosthodont 20 4 2007 383 388
8. P.G. Coelho, N.R. Silva, E.A. Bonfante, P.C. Guess, E.D. Rekow, and V.P. Thompson Fatigue testing of two porcelain-zirconia all-ceramic crown systems Dent Mater 25 9 2009 1122 1127
9. P.H. DeHoff, K.J. Anusavice, and N. Götzen Viscoelastic finite element analysis of an all-ceramic fixed partial denture J Biomech 39 1 2006 40 48 (Pubitemid 41585007)
10. G. Isgro, H. Wang, C.J. Kleverlaan, and A.J. Feilzer The effects of thermal mismatch and fabrication procedures on the deflection of layered all-ceramic discs Dent Mater 21 7 2005 649 655 (Pubitemid 40822783)
11. P.H. DeHoff, and K.J. Anusavice Viscoelastic finite element stress analysis of the thermal compatibility of dental bilayer ceramic systems Int J Prosthodont 22 1 2009 56 61
12. P. Benetti, A. Della Bona, and J.R. Kelly Evaluation of thermal compatibility between core and veneer dental ceramics using shear bond strength test and contact angle measurement Dent Mater 26 8 2010 743 750
13. K.J. Anusavice, P.H. DeHoff, B. Hojjatie, and A. Gray Influence of tempering and contraction mismatch on crack development in ceramic surfaces J Dent Res 68 7 1989 1182 1187
14. M. Toparli, and S. Sasaki Finite element analysis of the temperature and thermal stress in a postrestored tooth J Oral Rehabil 30 2003 921 926 (Pubitemid 37260141)
15. Q. Li, I. Ichim, J. Loughran, W. Li, M. Swain, and J. Kieser Numerical simulation of crack formation in all ceramic dental bridge Key Eng Mat 312 2006 293 298
16. W. Li, Q. Li, J. Loughran, M. Swain, I. Ichim, and N. Fujisawa Contact-driven crack formation in dental ceramic materials Key Eng Mat 324-325 2006 1257 1260 (Pubitemid 44728018)
17. I. Ichim, Q. Li, W. Li, M.V. Swain, and J. Kieser Modelling of fracture behaviour in biomaterials Biomaterials 28 7 2007 1317 1326 (Pubitemid 46001460)
18. I. Ichim, Q. Li, J. Loughran, M.V. Swain, and J. Kieser Restoration of non-carious cervical lesions: Part I. Modelling of restorative fracture Dent Mater 23 12 2007 1553 1561 (Pubitemid 350018868)
19. I.P. Ichim, P.R. Schmidlin, Q. Li, J.A. Kieser, and M.V. Swain Restoration of non-carious cervical lesions: Part II. Restorative material selection to minimise fracture Dent Mater 23 12 2007 1562 1569 (Pubitemid 350018869)
20. T. Belytschko, and T. Black Elastic crack growth in finite elements with minimal remeshing Int J Numer Methods Eng 45 1999 601 620
21. E. Budyn, G. Zi, N. Moes, and T. Belytschko A method for multiple crack growth in brittle materials without remeshing Int J Numer Methods Eng 61 2004 1741 1770 (Pubitemid 39459508)
22. P. Mariano, and F. Stazi Strain localization due to crack-microcrack interactions: X-FEM or a multifield approach Comput Methods Appl Mech Eng 193 2004 5035 5062 (Pubitemid 39408012)
23. N. Sukumar, D.L. Chopp, N. Moes, and T. Belyschko Modeling holes and inclusions by level sets in the extended finite-element method Comput Methods Appl Mech Eng 190 2001 6183 6200 (Pubitemid 32961904)
24. N. Sukumar, J. Srolovitz, T. Baker, and J. Prévost Brittle fracture in polycrystalline microstructures with the extended finite element method Int J Numer Methods Eng 56 2003 2015 2037 (Pubitemid 36551584)
25. T. Nagashima, T. Omoto, and S. Tani Stress intensity factor analysis of interface cracks using X-FEM Int J Numer Methods Eng 56 2003 1151 1173 (Pubitemid 36290345)
26. T. Hettich, and E. Ramm Interface material failure modelled by the extended finite-element method and level sets Comput Methods Appl Mech Eng 195 2006 4753 4767 (Pubitemid 43842583)
27. E. Vitali, and D. Benson An extended finite element formulation for contact in multi-material arbitrary Lagrangian-Eulerian calculations Int J Numer Methods Eng 67 2006 1420 1444 (Pubitemid 44323643)
28. E. Vitali, and D. Benson Contact with friction in multi-material arbitrary Lagrangian-Eulerian formulations using X-FEM Int J Numer Methods Eng 76 2008 893 921
29. T. Belytschko, H. Hao Chen, J. Xu, and G. Zi Dynamic crack propagation based on loss of hyperbolicity and a new discontinuous enrichment Int J Numer Methods Eng 58 2003 1873 1905 (Pubitemid 37481918)
30. J. Réthoré, A. Gravouil, and A. Combescure An energy-conserving scheme for dynamic crack growth using the extended finite element method Int J Numer Methods Eng 63 2005 631 659 (Pubitemid 40815370)
31. T. Elguedj, A. Gravouil, and A. Combescure Appropriate extended functions for X-FEM simulation of plastic fracture mechanics Comput Methods Appl Mech Eng 195 2006 501 515 (Pubitemid 41715342)
32. Y.H. Yan, and S.H. Park An extended finite element method for modeling near-interfacial crack propagation in a layered structure Int J Solids Struct 45 17 2008 4756 4765
33. G. Meschke, and P. Dumstorff Energy-based modeling of cohesive and cohesionless cracks via X-FEM Comput Methods Appl Mech Eng 196 21-24 2007 2338 2357 (Pubitemid 46508637)
34. S. Bordas, J.G. Conley, B. Moran, J. Gray, and E. Nichols A simulation based design paradigm for complex cast components Eng Comput 23 2007 25 27
35. E. Béchet, M. Scherzer, and M. Kuna Application of the X-FEM to the fracture of piezoelectric materials Int J Numer Methods Eng 77 2009 1535 1565
36. J. Xu, Y. Li, X. Chen, Y. Yan, D. Ge, and M. Zhu Characteristics of windshield cracking upon low-speed impact: numerical simulation based on the extended finite element method Comp Mater Sci 48 2010 582 588
37. R.R. Bhargava, and K. Sharma A study of finite size effects on cracked 2-D piezoelectric media using extended fintie element method Comp Mater Sci 50 6 2011 1834 1845
38. W. Li, C. Rungsiyakull, Z. Zhang, S.W. Zhou, M.V. Swain, and I. Ichim Computational fracture modelling in bioceramic structures Adv Mat Res 268-270 2011 853 856
39. A. Barani, A.J. Keown, M.B. Bush, J.J.W. Lee, H. Chai, and B.R. Lawn Mechanics of longitudinal cracks in tooth enamel Acta Biomater 7 2011 2285 2292
40. P.H. DeHoff, K.J. Anusavice, and B. Hojjatie Thermal incompatibility analysis of metal-ceramic systems based on flexural displacement data J Biomed Mater Res 41 4 1998 614 623 (Pubitemid 28355447)
41. P.H. DeHoff, A.A. Barrett, R.B. Lee, and K.J. Anusavice Thermal compatibility of dental ceramic systems using cylindrical and spherical geometries Dent Mater 24 6 2008 744 752 (Pubitemid 351626156)
42. V.F. Ferrario, C. Sforza, C.E. Poggio, G. Serrao, and A. Colombo Three-dimensional dental arch curvature in human adolescents and adults Am J Orthod Dentofacial Orthop 115 4 1999 401 405
43. P.H. Dehoff, K.J. Anusavice, and S.B. Vontivillu Analysis of tempering stresses in metal-ceramic disks J Dent Res 75 2 1996 743 751 (Pubitemid 32763608)
44. Z. Zhang, S. Zhou, Q. Li, W. Li, and M. Swain Residual stresses in fabrication of core-veneered ceramic prostheses Adv Mat Res 97-101 2010 2241 2244
45. W. Pabst, and E. Gregorová Effect thermal and thermelastic properties of alumina, zirconia and alumina-zirconia composite ceramics B.M. Caruta, I.N. Martsch, New developments in materials science research 2007 Nova Science Publishers Inc New York 90 100
46. Z. Zhang, S. Zhou, Q. Li, W. Li, and M. Swain Sensitivity analysis of bi-layered ceramic dental restorations Dent Mater 28 2012 e6 e14
47. M.J. Tholey, M.V. Swain, and N. Thiel Thermal gradients and residual stresses in veneered Y-TZP frameworks Dent Mater 27 11 2011 1102 1110
48. J. Wachtman, W. Cannon, and M. Matthewson Mechanical properties of ceramics 2009 Wiley New York p. 75-9
49. E. Giner, N. Sukumar, J.E. Tarancón, and F.J. Fuenmayor An Abaqus implementation of the extended finite element method Eng Fract Mech 76 2009 347 368
50. T.P. Fries, and T. Belytschko The extended/generalized finite element method: an overview of the method and its applications Int J Numer Meth Eng 00 2000 1 6
51. S. Mohammadi Extended finite element method for fracture analysis of structures 2008 Wiley-Blackwell Oxford p. 13-90
52. M. Guazzato, T.R. Walton, W. Franklin, G. Davis, C. Bohl, and I. Klineberg Influence of thickness and cooling rate on development of spontaneous cracks in porcelain/zirconia structures Aust Dent J 55 3 2010 306 310
53. S.S. Scherrer, J.B. Quinn, G.D. Quinn, and J.R. Kelly Failure analysis of ceramic clinical cases using qualitative fractography Int J Prosthodont 19 2 2006 185 192 (Pubitemid 43534190)
54. S.S. Scherrer, G.D. Quinn, and J.B. Quinn Fractographic failure analysis of a Procera AllCeram crown using stereo and scanning electron microscopy Dent Mater 24 8 2008 1107 1113
55. U. Lohbauer, G. Amberger, G.D. Quinn, and S.S. Scherrer Fractographic analysis of a dental zirconia framework: a case study on a design issues J Mech Behav Biomed Mater 3 8 2010 623 629
56. M.V. Swain Unstable cracking (chipping) of veneering porcelain on all-ceramic dental crowns and fixed partial dentures Acta Biomater 5 2009 1668 1677
57. R.P. Christensen, and B.J. Ploeger A clinical comparison of zirconia, metal and alumina fixed-prosthesis frameworks veneered with layered or pressed ceramic: a three-year report J Am Dent Assoc 141 11 2010 1317 1329
58. P. Benetti, F. Pelogia, L.F. Valandro, M.A. Bottino, and A.D. Bona The effect of porcelain thickness and surface linear application on the fracture behavior of a ceramic system Dent Mater 27 9 2011 948 953
59. Y.H. Liu, H.L. Feng, Y.W. Bao, Y. Qiu, N. Xing, and Z.J. Shen Fracture and interfacial delamination origins of bilayer ceramic composites for dental restorations J Eur Ceram Soc 30 6 2010 1297 1305
60. J.W. Kim, S. Bhowmick, I. Hermann, and B.R. Lawn Transverse fracture of brittle bilayers: relevance to failure of all-ceramic dental crowns J Biomed Mater Res B Appl Biomater 79 1 2006 58 65 (Pubitemid 44477474)
61. M.N. Aboushelib, A. Feilzer, N. de Jager, and C.J. Kleverlaan Prestresses in bilayered all-ceramic restorations J Biomed Mater Res B Appl Biomater 87 1 2008 139 145
62. R. Belli, S. Monteiro Jr, L.N. Baratieri, H. Katte, A. Petschelt, and U. Lohbauer A photoelastic assessment of residual stresses in zirconia-veneer crowns J Dent Res 91 3 2012 316 320
63. W. Li, M.V. Swain, Q. Li, and G.P. Steven Fibre reinforced composite dental bridge, Part I. Experimental investigation Biomaterials 25 2004 4897 4993
64. W. Li, M.V. Swain, Q. Li, and G.P. Steven Fibre reinforced composite dental bridge, Part II. Numerical investigation Biomaterials 25 2004 4995 5001 (Pubitemid 38520829)
65. I.V. Singh, B.K. Mishra, S. Bhattacharya, and R.U. Patil The numerical simulation of fatigue crack growth using extended finite element method Int J Fatigue 36 2012 109 119