Extended Finite Element Method: For Fracture Analysis of Structures

Extended Finite Element Method: For Fracture Analysis of Structures

Volumn , Issue , 2008, Pages 1-261

  Mohammadi, Soheil ^a  

^a UNIVERSITY OF TEHRAN   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84891312571     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9780470697795     Document Type: Book

References (244)

1. Adalsteinsson, D. and Sethian, J.A. (2003) Transport and diffusion of material quantities on propagating interfaces via level set methods. Journal of Computational Physics, 85 (1), 271-288.
2. Aliabadi, M.H. and Sollero, P. (1998) Crack growth analysis in homogeneous orthotropic laminates. Composites Science and Technology, 58, 1697-1703.
3. Anderson, T. (1995) Fracture Mechanics: Fundamentals and Applications, CRC Press, USA.
4. Areias, P.M.A. and Belytschko, T. (2005a) Non-linear analysis of shells with arbitrary evolving cracks using XFEM. International Journal for Numerical Methods in Engineering, 62, 384-415.
5. Areias, P.M.A. and Belytschko, T. (2005b) Analysis of three-dimensional crack initiation and propagation using the extended finite element method. International Journal for Numerical Methods in Engineering, 63 (55), 760-788.
6. Areias, P.M.A. and Belytschko, T. (2006) Two-scale shear band evolution by local partition of unity. International Journal for Numerical Methods in Engineering, 66, 878-910.
7. Areias, P.M.A., Song, J.H. and Belytschko, T. (2006) Analysis of fracture in thin shells by overlapping paired elements. Computer Methods in Applied Mechanics and Engineering, 195, 5343-5360.
8. Asadpoure, A. (2006) Analysis of layered composites by the extended finite element method. MSc thesis, Sharif University of Technology, Tehran, Iran.
9. Asadpoure, A. and Mohammadi, S. (2007) A new approach to simulate the crack with the extended finite element method in orthotropic media. International Journal for Numerical Methods in Engineering, 69, 2150-2172.
10. Asadpoure, A., Mohammadi, S. and Vafai, A. (2006) Modeling crack in orthotropic media using a coupled finite element and partition of unity methods. Finite Elements in Analysis and Design, 42 (13), 1165-1175.
11. Asadpoure, A., Mohammadi and S., Vafai, A. (2007) Crack analysis in orthotropic media using the extended finite element method. Thin Walled Structures, 44 (9), 1031-1038.
12. Atluri, S.N., Kobayashi, A.S. and Nakagaki, M.A. (1975) Finite element program for fracture mechanics analysis of composite material. Fracture Mechanics of Composites, ASTM STP, 593, 86-98.
13. Atluri, S.N. (1982) Path-independent integrals in finite elasticity and inelasticity, with body forces, inertiam and arbitrary crack-face conditions. Engineering Fracture Mechanics, 16 (3), 341-364.
14. Atluri, S.N. and Shen, S. (2002) The Meshless Local Petrov-Galerkin (MLPG) Method. Tech Science Press, USA.
15. Babuska, I. and Miller, A. (1984) The post-processing approach to finite element method - part II. International Journal for Numerical Methods in Engineering, 20, 1111-1129.
16. Barnett, D.M. and Asaro, R.J. (1972) The fracture mechanics of slit-like cracks in anisotropic elastic media. Journal of the Mechanics and Physics of Solids, 20, 353-66.
17. Barrenblatt, G.I. (1959) The formation of equilibrium cracks during brittle fracture: general ideas and hypotheses for axially symmetric cracks. Journal of Applied Mathematics and Mechanics, 23, 622-636.
18. Barsoum, R. (1974) Application of quadratic isoparametric finite elements in linear fracture mechanics. International Journal of Fracture, 10, 603-605.
19. Barsoum, R. (1975) Further application of quadratic isoparametric finite elements to linear fracture mechanics of plate bending and general shells. International Journal of Fracture, 11, 167-169.
20. Barsoum, R. (1976a) On the use of isoparametric finite elements in linear fracture mechanics. International Journal for Numerical Methods in Engineering, 10, 25-37.
21. Barsoum, R. (1976b) A degenerate solid element for linear fracture analysis of plate bending and general shells. International Journal for Numerical Methods in Engineering, 10, 551-564.
22. Barsoum, R. (1977) Triangular quarter point elements as elastic and perfectly plastic crack tip elements. International Journal for Numerical Methods in Engineering, 11, 85-98.
23. Barsoum, R. (1981) An assessment of the quarter-point elements in pressure vessel fracture analysis. Sixth International Conference on Structural Mechanics in Reactor Technology, Paris.
24. Bazant, Z.P. and Planas, J. (1997) Fracture and Size Effects in Concrete and Other Quasibrittle Materials. CRC Press, USA.
25. Béchet, E., Minnebo, H., Moës, N. and Burgardt, B. (2005) Improved implementation and robustness study of the X-FEM for stress analysis around cracks. International Journal for Numerical Methods in Engineering, 64, 1033-1056.
26. Bellec, J. and Dolbow, J.E. (2003) A note on enrichment functions for modelling crack nucleation. Communications in Numerical Methods in Engineering, 19, 921-932.
27. Belytschko, T. and Black, T. (1999) Elastic crack growth in finite elements with minimal remeshing. International Journal of Fracture Mechanics, 45, 601-620.
28. Belytschko, T. and Chen, H. (2004) Singular enrichment finite element method for elastodynamic crack propagation. International Journal of Computational Methods, 1 (1), 1-15.
29. Belytschko, T., Lu, Y.Y. and Gu, L. (1994) Element-free Galerkin methods. International Journal for Numerical Methods in Engineering, 37, 229-256.
30. Belytschko, T., Krongauz, Y., Organ, D., Fleming, M. and Krysl, P. (1996) Meshless methods: an overview and recent developments. Computer Methods in Applied Mechanics and Engineering, 139, 3-47.
31. Belytschko, T., Moës, N., Usui, S. and Parimik, C. (2001) Arbitrary discontinuities in finite elements. International Journal for Numerical Methods in Engineering, 50, 993-1013.
32. Belytschko, T., Daniel, W.J.T. and Ventura, G. (2002a) A monolithic smoothing-gap algorithm for contact-impact based on the signed distance function. International Journal for Numerical Methods in Engineering, 55, 101-125.
33. Belytschko, T., Xu, J.X., Chessa, J., Moës, N. and Gravouil, A. (2002b) Recent developments in meshless and extended finite element methods. Second International Conference on Advanced Computational Methods in Engineering, Eindhoven, The Netherlands.
34. Belytschko, T., Chen, H., Xu, J. and Zi, G. (2003) Dynamic crack propagation based on loss of hyperbolicity and a new discontinuous enrichment. International Journal for Numerical Methods in Engineering, 58, 1873-1905.
35. Bogy, D.B. (1972) The plane solution for anisotropic elastic wedges under normal and shear traction. Journal of Applied Mechanics, 39, 1103-9.
36. Bordas, S. and Legay, A. (2005) X-FEM Mini-Course. EPFL, Lausanne, Switzerland.
37. Bordas, S. and Moran, B. (2006) Enriched finite elements and level sets for damage tolerance assessment of complex structures. Engineering Fracture Mechanics, 73, 1176-1201.
38. de Borst, R., Remmers, J.J.C. and Needleman, A. (2004a) Computational aspects of cohesive-zone models. Fifteenth European Conference of Fracture, Sweden.
39. de Borst, R., Gutiérrez, M.A., Wells, G.N., Remmers, J.J.C. and Askes, H. (2004b) Cohesive-zone models, higher-order continuum theories and reliability methods for computational failure analysis. International Journal for Numerical Methods in Engineering, 60, 289-315.
40. de Borst, R., Remmers, J.J.C., Needleman A. and Abellan, M.A. (2004c) Discrete vs smeared crack models for concrete fracture: bridging the gap. International Journal for Numerical and Analytical Methods in Geomechanics, 28, 583-607.
41. Bowie, O.L. and Freese, C.E. (1972) Central crack in plane orthotropic rectangular sheet. International Journal of Fracture Mechanics, 8, 49-58.
42. Budyn, E., Zi, G., Moës, N. and Belytschko, T. (2004) A method for multiple crack growth in brittle materials without remeshing. International Journal for Numerical Methods in Engineering, 61, 1741-1770.
43. Carloni, C. and Nobile, L. (2002) Crack initiation behaviour of orthotropic solids as predicted by the strain energy density theory. Theoretical and Applied Fracture Mechanics, 38, 109-119.
44. Carloni, C., Piva, A. and Viola, E. (2003) An alternative complex variable formulation for an inclined crack in an orthotropic medium. Engineering Fracture Mechanics, 70, 2033-2058.
45. Carlsson, L.A. and Prasad, S. (1993) Interfacial fracture of sandwich beams. Engineering Fracture Mechanics, 44 (4) 581-590.
46. Carpinteri, A. and Colombo, G. (1989) Numerical analysis of catastrophic softening behaviour (snap-back instability). Computers and Structures, 31 (4), 607-636.
47. Chahine, E., Laborde, P. and Renard, Y. (2006) A quasi-optimal convergence result for fracture mechanics with XFEM. Academie des Sciences, Paris, Ser. I 342, 527-532.
48. Chan, S.K., Tuba, I.S. and Wilson, W.K. (1970) On the finite element method in liner fracture mechanics: Finite element method with first order displacement functions to compute crack tip stress intensity factors in various shapes under different loading conditions. Engineering Fracture Mechanics, 2, 1-17.
49. Chen, T., Minev, P.D. and Nandakumar, K. (2004) A projection scheme for incompressible multiphase flow using adaptive Eulerian grid. International Journal for Numerical Methods in Fluids, 45, 1-19.
50. Chessa, J. and Belytschko, T. (2003a) An enriched finite element method and level sets for axisymmetric two-phase flow with surface tension. International Journal for Numerical Methods in Engineering, 58, 2041-2064.
51. Chessa, J. and Belytschko, T. (2003b) An extended finite element method for two-phase fluids. Transactions of the ASME, 70, 10-18.
52. Chessa, J. and Belytschko, T. (2004) Arbitrary discontinuities in space-time finite elements by level sets and X-FEM. International Journal for Numerical Methods in Engineering, 61, 2595-2614.
53. Chessa, J. and Belytschko, T. (2006) A local space-time discontinuous finite element method. Computer Methods in Applied Mechanics and Engineering, 195, 1325-1343.
54. Chessa, J., Smolinski, P. and Belytschko, T. (2002) The extended finite element method (XFEM) for solidification problems. International Journal for Numerical Methods in Engineering, 53, 1959-1977.
55. Chessa, J., Wang, H. and Belytschko, T. (2003) On the construction of blending elements for local partition of unity enriched finite elements. International Journal for Numerical Methods in Engineering, 57, 1015-1038.
56. Chopp, D.L. (2001) Some improvements on the fast marching method. SIAM Journal of Scientific Computations, 23 (1), 230-244.
57. Chopp, D.L. and Sukumar, N. (2003) Fatigue crack propagation of multiple coplanar cracks with the coupled extended finite element/fast marching method. International Journal of Engineering Science, 41, 845-869.
58. Chorin, A. J. (1968) Numerical solution of the Navier-Stokes equation. Mathematical Computations, 23, 745-762.
59. Chow, W.T. and Atluri, S.N. (1998) Stress intensity factors as the fracture parameters for delamination crack growth in composite laminates. Computational Mechanics, 21, 1-10.
60. Chowdhury, S.R. and Narasimhan, R. (2000) A cohesive finite element formulation for modeling fracture and delamination in solids. Saadhana, 25 (6), 561-587.
61. Cottrell, A.H. (1961) Theoretical aspects of radiation damage and brittle fracture in steel pressure vessels. Iron and Steel Institute Special Report No. 69, pp. 281-296. Iron and Steel Institute, London, UK.
62. Cruse, T. (1988) Boundary Element Analysis in Computational Fracture Mechanics. Kluwer, Dordrecht, The Netherlands.
63. Daux, C., Moës, N., Dolbow, J., Sukumark, N. and Belytschko, T. (2000) Arbitrary branched and intersecting cracks with the extended finite element method. International Journal for Numerical Methods in Engineering, 48, 1741-1760.
64. Dolbow, J.E. (1999) An extended finite element method with discontinuous enrichment for applied mechanics. PhD dissertation, Theoretical and Applied Mechanics, Northwestern University, USA.
65. Dolbow, J.E. and Nadeau, J.C. (2002) On the use of effective properties for the fracture analysis of microstructured materials. Engineering Fracture Mechanics, 69, 1607-1634.
66. Dolbow, J.E. and Gosz, M. (2002) On the computation of mixed-mode stress intensity factors in functionally graded materials. International Journal of Solids and Structures, 39, 2557-2574.
67. Dolbow, J.E. and Devan, A. (2004) Enrichment of enhanced assumed strain approximations for representing strong discontinuities: addressing volumetric incompressibility and the discontinuous patch test. International Journal for Numerical Methods in Engineering, 59, 47-67.
68. Dolbow, J., Moës, N. and Belytschko, T. (2000a) Discontinuous enrichment in finite elements with a partition of unity method. Finite Elements in Analysis and Design, 36, 235-260.
69. Dolbow, J., Moës, N. and Belytschko, T. (2000b) Modeling fracture in Mindlin-Reissner plates with the extended finite element method. International Journal of Solids and Structures, 37, 7161-7183.
70. Dolbow, J., Moës, N. and Belytschko, T. (2000c) An extended finite element method for modeling crack growth with frictional contact. Finite Elements in Analysis and Design, 36 (3) 235-260.
71. Dolbow, J., Moës, N. and Belytschko, T. (2001) An extended finite element method for modeling crack growth with frictional contact. Computer Methods in Applied Mechanics and Engineering, 190, 6825-6846.
72. Dolbow, J., Fried, E. and Ji, H. (2004) Chemically induced swelling of hydrogels. Journal of the Mechanics and Physics of Solids, 52, 51-84.
73. Dolbow, J., Fried, E. and Ji, H. (2005) A numerical strategy for investigating the kinetic response of stimulus-responsive hydrogels. Computer Methods in Applied Mechanics and Engineering, 194, 4447-4480.
74. Duarte, C.A. and Oden, J.T. (1995) Hp clouds - a meshless method to solve boundary-value problems. TICAM Report 95-05.
75. Duarte, C.A. and Oden, J.T. (1996) An H-p adaptive method using clouds. Computer Methods in Applied Mechanics and Engineering, 139, 237-262.
76. Dugdale, D. (1960) Yielding of steel sheets containing slits. Journal of Mechanics and Physics of Solids, 8, 100-108.
77. Dumstorff, P. and Meschke, G. (2003) Finite element modelling of cracks based on the partition of unity method. Proceedings of Applied Mathematics and Mechanics (PAMM), 2, 226-227.
78. Ebrahimi, S.H. (2007) Extended finite element analysis of cracking with frictional contact. MSc thesis, University of Tehran, Tehran, Iran.
79. Elguedj, T., Gravouil, A. and Combescure, A. (2006) Appropriate extended functions for X-FEM simulation of plastic fracture mechanics. Computer Methods in Applied Mechanics and Engineering, 195, 501-515.
80. Erdogan, F. and Sih, G.C. (1963) On the crack extension in plates under plane loading and transverse shear. Journal of Basic Engineering, 85, 519-527.
81. Eshelby, J.D. (1956) The continuum theory of lattice defects. In: Solid State Physics, Vol. 3, (eds F. Seitz and D. Turnbull), pp. 79-141, Academic Press, New York.
82. Eshelby, J.D. (1974) Calculation of energy release rate. In: Prospect of Fracture Mechanics, pp. 69-84, Nordhoff, UK.
83. Evans, R.H. and Marathe, M.S. (1968) Microcracking and stress-strain curves for concrete in tension. Materials and Structures Research and Testing, 1 (1), 61-64.
84. Fagerström, M. and Larsson, R. (2006) Theory and numerics for finite deformation fracture modelling using strong discontinuities. International Journal for Numerical Methods in Engineering, 66, 911-948.
85. Fawkes, A., Owen, D.R.J. and Luxmoore, A. (1979) An assessment of crack tip singularity models for use with isoparamtreic elements. Engineering Fracture Mechanics, 11, 143-159.
86. Ferrie, E., Buffiere, J.Y., Ludwig, W., Gravouil, A. and Edwards, L. (2006) Fatigue crack propagation: In situ visualization using X-ray microtomography and 3D simulation using the extended finite element method. Acta Materialia, 54, 1111-1122.
87. Fish, J. and Yuan, Z. (2005) Multiscale enrichment based on partition of unity. International Journal for Numerical Methods in Engineering, 62, 1341-1359.
88. Forghani, A. (2005) Application of the extended finite element method for modeling cohesive crack problems. MSc thesis, Sharif University of Technology, Tehran, Iran.
89. Fries, T.P. and Belytschko, T. (2006) The intrinsic XFEM: a method for arbitrary discontinuities without additional unknowns. International Journal for Numerical Methods in Engineering, 68 (13) 1358-1385.
90. Gao, H. and Klein, P. (1998) Numerical simulation of crack growth in an isotropic solid with randomized internal cohesive bonds. Journal of the Mechanics and Physics of Solids, 42 (6), 187-218.
91. Gravouil, A., Moës, N. and Belytschko, T. (2002) Non-planar 3D crack growth by the extended finite element and level sets-Part II: Level set update. International Journal for Numerical Methods in Engineering, 53, 2569-2586.
92. Griffith, A.A. (1921) The phenomena of rupture and flow in solids. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering, 221, 163-197.
93. Griffith, A.A. (1924) The theory of rupture. Proceedings of International Congress on Applied Mechanics, Delft, pp. 55-62.
94. Gtoudos, E. (1993) Fracture Mechanics: An Introduction. Kluwer Academic Press, The Netherlands.
95. Guidault, P.A., Allix, O., Champaney, L. and Navarro, J.P. (2004) A micro-macro approach for crack propagation with local enrichment. In: Proceedings of the Seventh International Conference on Computational Structures Technology, (eds B.H.V. Toppings and C.A. Mota Soares), Paper 199, Civil-Comp Press, Scotland.
96. Gutierrez, L.M.G. and Bermejo, R. (2005) A semi-Lagrangian level set method for incompressible Navier-Stokes equations with free surface. International Journal for Numerical Methods in Fluids, 49, 1111-1146.
97. Haidar, K., Dube, J.F. and Pijaudier-Cabot, G. (2003) Modelling crack propagation in concrete structures with a two scale approach. International Journal for Numerical and Analytical Methods in Geomechanics, 27, 1187-1205.
98. Hellen, T.K. and Blackburn, W.S. (1975) The calculation of stress intensity factors for combined tensile and shear loading. International Journal of Fracture, 11 (4), 605-617.
99. Henshell, R.D. and Shaw, K.G. (1975) Crack tip elements are unnecessary. International Journal of Numerical Methods in Engineering, 9 (3), 495-509.
100. Hettich, T. and Ramm, E. (2006) Interface material failure modeled by the extended finite-element method and level sets. Computer Methods in Applied Mechanics and Engineering, 195, 4753-4767.
101. Hibbit, H. (1977) Some properties of singular isoparametric elements. International Journal for Numerical Methods in Engineering, 11, 180-184.
102. Hillerborg, A., Modeer, M. and Peterson, P.E. (1976) Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement and Concrete Research, 6, 733-782.
103. Hirari, I., Uchiyama, Y., Mizuta, Y. and Pilkey, W.D. (1985) An exact zooming method. Finite Elements in Analysis and Design, 1, 61-69.
104. Hong, S. and Kim, K.S. (2003) Extraction of cohesive-zone laws from elastic far-fields of a cohesive crack tip: a field projection method. Journal of the Mechanics and Physics of Solids, 51, 1267-1286.
105. Huang, R., Sukumar, N. and Prevost, J.H. (2003) Modeling quasi-static crack growth with the extended finite element method, Part II: Numerical applications. International Journal of Solids and Structures, 40, 7539-7552.
106. Hussain, M., Pu, S. and Underwood, J. (1974) Strain energy release rate for a crack under combined mode I and mode II. ASTM, STP, 560, 2-28.
107. Hutchinson, J. (1968) Singular behavior at the end of a tensile crack tip in a power-law hardening material. Journal of Mechanics and Physics of Solids, 16, 13-31.
108. Hutchinson, J. (1990) Mixed mode cracking in layered materials. Advances in Applied Mechanics, 29, 63-191.
109. Hutchinson, J.W. and Sue, Z. (1992) Mixed mode cracking in layered materials. In: Advances in Applied Mechanics, Vol. 29, (eds J.W. Hutchinson and T.Y. Wu), pp. 63-191. Academic Press, Orlando, USA.
110. Inglis, C.E. (1913) Stresses in a plate due to the presence of cracks and sharp corners. Transactions of Institute of Naval Architects, 55, 219-241.
111. Irwin, G.R. (1957) Analysis of stresses and strains near the end of a crack transversing a plate. Journal of Applied Mechanics, Transactions ASME, 24, 361-364.
112. Irwin, G.R. (1958) Fracture. In: Handbuch der Physik, Vol. 6, (ed. Flugge), pp. 551-590. Springer-Verlag, Berlin, Germany.
113. Irwin, G.R. (1960) Plastic zone near a crack tip and fracture toughness. Proceedings of the 7th Sagamore Conference, New York, USA, p. 63.
114. Irwin, G.R., Kies, G.A. and Smith, H.L. (1958) Fracture strength relative to the onset and arrest of crack propagation. Proceedings of ASTM, 58, 640-657.
115. Ishikawa, H. (1980) A finite element analysis of stress intensity factors for combined tensile and shear loading by only a virtual crack extension. International Journal of Fracture 16, (5) 243-246.
116. Jernkvist, L.O. (2001) Fracture of wood under mixed mode loading II, Experimental investigation of Picea abies. Engineering Fracture Mechanics, 68, 565-576.
117. Ji, H. and Dolbow, J.E. (2004) On strategies for enforcing interfacial constraints and evaluating jump conditions with the extended finite element method. International Journal for Numerical Methods in Engineering, 61, 2508-2535.
118. Ji, H., Chopp, D. and Dolbow, J.E. (2002) A hybrid extended finite element-level set method for modeling phase transformations. International Journal for Numerical Methods in Engineering, 54, 1209-1233.
119. Ji, H., Mourad, H., Fried, E. and Dolbow, J. (2006) Kinetics of thermally induced swelling of hydrogels. International Journal of Solids and Structures, 43, 1878-1907.
120. Jirásek, M. (2002) Numerical modeling of strong discontinuities. Revue Française de Génie Civil, 6 (6).
121. Jirásek, M. and Zimmermann, T. (2001a) Embedded crack model. Part I: Basic formulation. International Journal for Numerical Methods in Engineering, 50, 1269-1290.
122. Jirásek, M. and Zimmermann, T. (2001b) Embedded crack model. Part II: Combination with smeared cracks. International Journal for Numerical Methods in Engineering, 50, 1291-1305.
123. Kanninen, M. (1984) Application of fracture mechanics to fiber composite materials and adhesive joint, a review. Third International Conference on Numerical Methods in Fracture Mechanics, Swansea, UK.
124. Karihaloo, B.L. and Xiao, Q.Z. (2003) Modelling of stationary and growing cracks in FE framework without remeshing: a state-of-the-art review. Computers and Structures, 81, 119-129.
125. Karlsson, A. and Backlund, J. (1978) J-integral at loaded crack surfaces. International Journal of Fracture, 14 (6), R311-R314.
126. Khoei, A.R. and Nikbakht, M. (2006) Contact friction modeling with the extended finite element method (X-FEM). Journal of Materials Processing Technology, 177, 58-62.
127. Khoei, A.R., Shamloo, A. and Azami, A.R. (2006a) Extended finite element method in plasticity forming of powder compaction with contact friction. International Journal of Solids and Structures, 43 (18-19), 5421-5448.
128. Khoei, A.R., Shamloo, A., Anahid, M. and Shahim, K. (2006b) The extended finite element method (X-FEM) for powder forming problems. Journal of Materials Processing Technology, 177, 53-57.
129. Kim, J.H. and Paulino, G.H. (2002) Mixed-mode fracture of orthotropic functionally graded materials using finite elements and the modified crack closure method. Engineering Fracture Mechanics, 69, 1557-1586.
130. Kim, J.H. and Paulino, G.H. (2003) The interaction integral for fracture of orthotropic functionally graded materials: evaluation of stress intensity factors. International Journal of Solids and Structures, 40, 3967-4001.
131. Kolke, A., Walhorn, E., Hubner, B. and Dinkler, D. (2003) Numerical modeling of fluid-structure interaction with free surface flows. Proceedings of Applied Mathematics and Mechanics (PAMM), 3, 412-413.
132. Kuo, M.C. and Bogy, D.B. (1974) Plane solutions for the displacement and traction-displacement problem for anisotropic elastic wedges. Journal of Applied Mechanics, 41, 197-203.
133. Laborde, P., Pommier, J., Renard, Y. and Salaün, M. (2005) High-order extended finite element method for cracked domains. International Journal for Numerical Methods in Engineering, 64, 354-381.
134. Larsson, R. and Fagerström, M. (2005) A framework for fracture modelling based on the material forces concept with XFEM kinematics. International Journal for Numerical Methods in Engineering, 62, 1763-1788.
135. Lee, S.H., Song, J.H., Yoon, Y.C., Zi, G. and Belytschko, T. (2004) Combined extended and superimposed finite element method for cracks. International Journal for Numerical Methods in Engineering, 59, 1119-1136.
136. Legay, A., Wang, H.W. and Belytschko, T. (2005) Strong and weak arbitrary discontinuities in spectral finite elements. International Journal for Numerical Methods in Engineering, 64, 991-1008.
137. Legrain, G., Moës, N. and Verron, E. (2005) Stress analysis around crack tips in finite strain problems using the extended finite element method. International Journal for Numerical Methods in Engineering, 63, 290-314.
138. Lekhnitskii, S.G. (1968) Anisotropic Plates. Gordon and Breach Science Publishers, New York, USA.
139. Li, F.Z., Shih, C.F. and Needleman, A. (1985) A comparison of methods for calculating energy release rates. Engineering Fracture Mechanics, 21 (2), 405-421.
140. Lim, W.K., Choi, S.Y. and Sankar, B.V. (2001) Biaxial load effects on crack extension in anisotropic solids. Engineering Fracture Mechanics, 68, 403-416.
141. Lin, C.L., Lee, H., Lee, T. and Weber, L.J. (2005) A level set characteristic Galerkin finite element method for free surface flows. International Journal for Numerical Methods in Fluids, 49, 521-547.
142. Liu, W.K., Chen, Y., Jun, S., Chen, J.S., Belytschko, T., Pan, C., Uras, R.A. and Chang, C.T. (1996) Overview and applications of the reproducing kernel particle methods. Archives of Computational Methods in Engineering; State of the Art Reviews, 3, 3-80.
143. Liu, X.Y., Xiao, Q.Z. and Karihaloo, B.L. (2004) XFEM for direct evaluation of mixed mode SIFs in homogeneous and bi-materials. International Journal for Numerical Methods in Engineering, 59, 1103-1118.
144. Macneal, R.H. (1994) Finite Elements: Their Design and Performance. Marcell Dekker, Inc., USA.
145. Mariani, S. and Perego, U. (2003) Extended finite element method for quasi-brittle fracture. International Journal for Numerical Methods in Engineering, 58, 103-126.
146. Mariano, P.M. and Stazi, F.L. (2004) Strain localization due to crack-microcrack interactions: XFEM for a multifield approach. Computer Methods in Applied Mechanics and Engineering, 193, 5035-5062.
147. Meguid, S.A. (1989) Engineering Fracture Mechanics. Elsevier Applied Science, UK.
148. Melenk, J.M. and Babuska, I. (1996) The Partition of Unity Finite Element Method: Basic Theory and Applications. Seminar fur Angewandte Mathematik, Eidgenossische Technische Hochschule, Research Report No. 96-01, January, CH-8092 Zurich, Switzerland.
149. Menouillard, T., Réthoré, J., Combescure A. and Bung, H. (2006) Efficient explicit time stepping for the extended finite element method (X-FEM). International Journal for Numerical Methods in Engineering, 68 (9) 911-939.
150. Mergheim, J., Kuh, E. and Steinmann, P. (2005) A finite element method for the computational modelling of cohesive cracks. International Journal for Numerical Methods in Engineering, 63, 276-289.
151. Mergheim, J., Kuh, E. and Steinmann, P. (2006) Towards the algorithmic treatment of 3D strong discontinuities. Communications in Numerical Methods in Engineering, 23 (2) 97-108.
152. Moës, N. and Belytschko, T. (2002a) Extended finite element method for cohesive crack growth. Engineering Fracture Mechanics, 69, 813-833.
153. Moës, N. and Belytschko, T. (2002b) X-FEM: De nouvelles frontières pour les éléments finis. Revue Européenne des Éléments Finis, 11, 305-318.
154. Moës, N., Dolbow, J. and Belytschko, T. (1999) A finite element method for crack growth without remeshing. International Journal for Numerical Methods in Engineering, 46, 131-150.
155. Moës, N., Gravouil, A. and Belytschko, T. (2002) Non-planar 3D crack growth by the extended finite element and level sets-Part I: Mechanical model. International Journal for Numerical Methods in Engineering, 53, 2549-2568.
156. Moës, N., Cloirec, M., Cartraud, P. and Remacle, J.F. (2003) A computational approach to handle complex microstructure geometries. Computer Methods in Applied Mechanics and Engineering, 192, 3163-3177.
157. Moës, N., Béchet, E. and Tourbier, M. (2006) Imposing Dirichlet boundary conditions in the extended finite element method. International Journal for Numerical Methods in Engineering, 67 (12), 1641-1669.
158. Mohammadi, S. (2003) Discontinuum Mechanics by Combined Finite/Discrete Elements. WIT Press, UK.
159. Mohammadi, S. and Asadpoure, A. (2006) A novel approach to analyze a crack with XFEM in composite meida. International Conference on Computational Methods in Engineering (ICOME), Hefei, China.
160. Muskelishvili, N.I. (1953) Some Basic Problems on the Mathematical Theory of Elasticity. Translated by J.R.M. Radok, Noordhoof, Groningen, The Netherlands.
161. Nagashima, T. and Suemasu, H. (2004) Application of extended finite element method to fracture of composite materials. European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS), Jyväskylä, Finland.
162. Nagashima, T., Omoto, Y. and Tani, S. (2003) Stress intensity factor analysis of interface cracks using X-FEM. International Journal for Numerical Methods in Engineering, 56, 1151-1173.
163. Nikbakht, M. (2005) Application of the extended finite element method for numerical simulation of contact problems. MSc thesis, Sharif University of Technology, Tehran, Iran.
164. Nobile, L. and Carloni, C. (2005) Fracture analysis for orthotropic cracked plates. Composite Structures, 68 (33) 285-293.
165. Oliver, J., Huespe, A.E., Pulido, M.D.G. and Samaniego, E. (2003) On the strong discontinuity approach in finite deformation settings. International Journal for Numerical Methods in Engineering, 56, 1051-1082.
166. Onate, E., Idelsohn, S., Fischer, T. and Zienkiewicz, O.C. (1995) A finite point method for analysis of fluid flow problems. Ninth International Conference on Finite Elements in Fluids, Venice, Italy, pp. 15-21.
167. Osher, S. and Sethian, J.A. (1988) Fronts propagating with curvature-dependent speed: algorithms based on Hamilton-Jacobi formulations. Journal of Computational Physics, 79 (1), 12-49.
168. Owen, D.R.J. and Hinton, E. (1980) Finite Elements in Plasticity: Theory and Practice. Pineridge Press Ltd, Swansea, UK.
169. Owen, D.R.J. and Fawkes, A. (1983) Engineering Fracture Mechanics: Numerical Methods and Applications. Pineridge Press Ltd, Swansea, UK.
170. Parks, D. (1974) A stiffness derivative finite element technique for determination of crack tip stress intensity factors. International Journal of Fracture, 10 (4) 487-502.
171. Patrikalakis, N.M. (2003) Computational Geometry. Lecture Notes, Massachusetts Institute of Technology, USA.
172. Patzak, B. and Jirásek, M. (2003) Process zone resolution by extended finite elements. Engineering Fracture Mechanics, 70, 957-977.
173. Peerlings, R.H.J., de Borst, R., Brekelmans, W.A.M. and Geers, M.G.D. (2002) Localisation issues in local and nonlocal continuum approaches to fracture. European Journal of Mechanics -A: Solids, 21, 175-189.
174. Peters, M. and Hack, K. (2005) Numerical aspects of the extended finite element method. Proceedings of Applied Mathematics and Mechanics, 5, 355-356.
175. Peters, M., Hoppe, U. and Hack, K. (2004) Simulation of crack-propagation using embedded discontinuities. Proceedings of Applied Mathematics and Mechanics (PAMM), 4, 366-367.
176. Piva, A., Viola, E. and Tornabene, F. (2005) Crack propagation in an orthotropic medium with coupled elastodynamic properties. Mechanics Research Communications, 32, 153-159.
177. Qu, J. and Bassani, J.L. (1993) Interfacial fracture mechanics for anisotropic biomaterials, Journal of Applied Mechanics, 60, 422-431.
178. Rabczuk, T. and Wall, W.A. (2006) Extended finite element and meshfree methods. Technical University of Munich, Germany, WS200/2007.
179. Remmers, J.J.C., Wells, G.N. and de Borst, R. (2003) A solid-like shell element allowing for arbitrary delaminations. International Journal for Numerical Methods in Engineering, 58, 2013-2040.
180. Réthoré, J., Gravouil, A. and Combescure, A. (2005a) An energy-conserving scheme for dynamic crack growth using the extended finite element method. International Journal for Numerical Methods in Engineering, 63, 631-659.
181. Réthoré, J., Gravouil, A. and Combescure, A. (2005b) A combined space-time extended finite element method. International Journal for Numerical Methods in Engineering, 64, 260-284.
182. Rice, J.R. (1968) Path-independent integral and the approximate analysis of strain concentration by notches and cracks. Journal of Applied Mechanics, Transactions ASME, 35 (2), 379-386.
183. Rice, J.R. (1988) Elastic fracture mechanics concepts for interfacial cracks. Journal of Applied Mechanics, Transactions ASME, 55, 98-103.
184. Rice, J.R. and Rosengren, G.F. (1968) Plane strain deformation near a crack tip in a power-law hardening material. Journal of Mechanics and Physics of Solids, 16, 1-12.
185. Rice, J.R. and Levy, N. (1972) The part-through surface crack in an elastic plate. Journal of Applied Mechanics, Transactions ASME, 39, 185-194.
186. Sadeghirad, A. and Mohammadi, S. (2007) Equilibrium on the line method (ELM) for imposition of Neumann boundary conditions in the finite point method (FPM). International Journal for Numerical Methods in Engineering, 69, 60-86.
187. Saleh, A.L. and Aliabadi, M.A. (1995) Crack growth analysis in concrete using boundary element method. Engineering Fracture Mechanics, 51, 533-545.
188. Samaniego, E. and Belytschko, T. (2005) Continuum-discontinuum modelling of shear bands. International Journal for Numerical Methods in Engineering, 62, 1857-1872.
189. Saouma, V.E. (2000) Fracture mechanics. Lecture notes CVEN-6831, Univesity of Colorado, USA.
190. Saouma, V.E., Ayari, M. and Leavell, D. (1987) Mixed mode crack propagation in homogeneous anisotropic solids. Engineering Fracture Mechanics, 27 (2), 171-184.
191. Sethian, J.A. (1987) Numerical methods for propagating fronts. In: Variational Methods for Free Surface Interfaces, (eds P. Concus and R. Finn), pp. 155-164. Springer, New York, USA.
192. Sethian, J.A. (1996) A marching level set method for monotonically advancing fronts. Proceedings of National Academy of Science, 93 (4), 1591-1595.
193. Sethian, J.A. (1999a) Fast marching methods. SIAM Review, 41 (2), 199-235.
194. Sethian, J.A. (1999b) Level set methods and fast marching methods: evolving interfaces. Computational Geometry Fluid Mechanics Computer Vision and Materials Science. Cambridge University Press, Cambridge, UK.
195. Sethian, J.A. (2001) Evolution, implementation, and application of level set and fast marching methods for advancing fronts. Journal of Computational Physics, 169 (2), 503-555.
196. Sethian, J.A. (2006) Moving interfaces and boundaries: level set methods and fast marching methods. http://math.berkeley.edu/~sethian/Explanations/level_set_explain.html.
197. Sethian, J.A. and Wilkening, J. (2004) A numerical model of stress driven grain boundary diffusion. Journal of Computational Physics, 193 (1), 275-305.
198. Sha, G. (1984) On the virtual crack extension technique for stress intensity factors and energy release rate calculation for mixed fracture modes. International Journal of Fracture, 25 (2) 33-42.
199. Shamloo, A., Azami, A.R. and Khoei, A.R. (2005) Modeling of pressure-sensitive materials using a cap plasticity theory in extended finite element method. Journal of Materials Processing Technology, 164-165, 1248-1257.
200. Sharifabadi, H. (1990) Theory of Elasticity. Lecture Notes, University of Tehran, Iran.
201. Shih, C., de Lorenzi, H. and German, M. (1976) Crack extension modelling with singular quadratic isoparametric elements. International Journal of Fracture, 12, 647-651.
202. Sih, G.C. (1973) Handbook of Stress Intensity Factors for Researchers and Engineers. Lehigh University, Bethlehem, PA, USA.
203. Sih, G.C. (1974) Strain energy density factors applied to mixed mode crack problems. International Journal of Fracture, 10, 305-321.
204. Sih, G.C., Paris, P. and Irwin, G. (1965) On cracks in rectilinearly anisotropic bodies. International Journal of Fracture Mechanics, 1 (3) 189-203.
205. Song, J.H., Areias, P.M.A. and Belytschko, T. (2006) A method for dynamic crack and shear band propagation with phantom nodes. International Journal for Numerical Methods in Engineering, 67, 868-893.
206. Stazi, F.L., Budyn, E., Chessa, J. and Belytschko, T. (2003) An extended finite element method with higher-order elements for curved cracks. Computational Mechanics, 31, 38-48.
207. Stolarska, M. and Chopp, D.L. (2003) Modeling thermal fatigue cracking in integrated circuits by level sets and the extended finite element method. International Journal of Engineering Science, 41, 2381-2410.
208. Stolarska, M., Chopp, D.L., Moës, N. and Belytschko, T. (2001) Modelling crack growth by level sets in the extended finite element method. International Journal for Numerical Methods in Engineering, 51, 943-960.
209. Sukumar, N. and Prevost, J.H. (2003) Modeling quasi-static crack growth with the extended finite element method, Part I: Computer implementation. International Journal of Solids and Structures, 40, 7513-7537.
210. Sukumar, N., Moës, N., Moran, B. and Belytschko, T. (2000) Extended finite element method for three-dimensional crack modeling. International Journal for Numerical Methods in Engineering, 48, 1549-1570.
211. Sukumar, N., Chopp, D.L., Moës, N. and Belytschko, T. (2001) Modeling holes and inclusions by level sets in the extended finite-element method. Computer Methods in Applied Mechanics and Engineering, 190, 6183-6200.
212. Sukumar, N., Chopp, D.L. and Moran, B. (2003a) Extended finite element method and fast marching method for three-dimensional fatigue crack propagation. Engineering Fracture Mechanics, 70, 29-48.
213. Sukumar, N., Srolovitz, D.J., Baker, T.J. and Prevost, J.H. (2003b) Brittle fracture in polycrystalline microstructures with the extended finite element method. International Journal for Numerical Methods in Engineering, 56, 2015-2037.
214. Sukumar, N., Huang, Z., Prevost, J.H. and Suo, Z. (2004) Partition of unity enrichment for bimaterial interface cracks. International Journal for Numerical Methods in Engineering, 59, 1075-1102.
215. Swenson, D. and Ingraffea, A. (1988) Modeling mixed mode dynamic crack propagation using finite elements: Theory and applications. Computational Mechanics, 3, 381-397.
216. Tupholme, G.E. (1974) A study of cracks in orthotropic crystals using dislocations layers. Journal of Engineering and Mathematics, 8, 57-69.
217. Tvergaard, V. and Hutchinson, J. (1992) The relation between crack growth resistance and fracture process parameters in elastic-plastic solids. Journal of Mechanics and Physics of Solids, 40 (6) 1377-1397.
218. Ventura, G. (2006) On the elimination of quadrature subcells for discontinuous functions in the extended finite-element method. International Journal for Numerical Methods in Engineering, 66, 761-795.
219. Ventura, G., Budyn, E. and Belytschko, T. (2003) Vector level sets for description of propagating cracks in finite elements. International Journal for Numerical Methods in Engineering, 58, 1571-1592.
220. Ventura, G., Moran, B. and Belytschko, T. (2005) Dislocations by partition of unity. International Journal for Numerical Methods in Engineering, 62, 1463-1487.
221. Viola, A., Piva, A. and Radi, E. (1989) Crack propagation in an orthotropic medium under general loading. Engineering Fracture Mechanics, 34 (5), 1155-1174.
222. Wagner, G.J., Moës, N., Liu, W.K. and Belytschko, T. (2001) The extended finite element method for rigid particles in Stokes flow. International Journal for Numerical Methods in Engineering, 51, 293-313.
223. Wagner, G.J., Ghosal, S. and Liu, W.K. (2003) Particulate flow simulations using lubrication theory solution enrichment. International Journal for Numerical Methods in Engineering, 56, 1261-1289.
224. Wang, S.S., Yau, J.F. and Corten, H.T. (1980) A mixed mode crack analysis of rectilinear anisotropic solids using conservation laws of elasticity. International Journal of Fracture, 16, 247-259.
225. Wang, X. and Zhong, Z. (2003) A cracked sliding interface between anisotropic bimaterials. Mechanics Research Communications, 30, 387-393.
226. Wells, A. (1963) Application of fracture mechanics at and beyond general yielding. British Welding Research Association, Report M13, UK.
227. Wells, G.N. and Sluys, L.J. (2001) A new method for modeling cohesive cracks using finite elements. International Journal for Numerical Methods in Engineering, 50, 2667-2682.
228. Westergaard, H. (1939) Bearing pressures and cracks. ASME Journal of Applied Mechanics, 6, 49-53.
229. Whittaker, B.N. and Singh, R.N. (1992) Rock Fracture Mechanics, Principles, Design and Applications. Elsevier, The Netherlands.
230. Williams, M.L. (1952) Stress singularities resulting from various boundary conditions in angular corners of plates in extension. Journal of Applied Mechanics, Transactions ASME, 19, 526-528.
231. Willis, J.R. (1967) A comparison of the fracture criteria of Griffith and Barenblatt. Journal of Mechanics and Physics of Solids, 15, 151-162.
232. Wood, W.L. (1984) A further look at Newmark, Houbolt, etc., time-stepping formulae. International Journal for Numerical Methods in Engineering, 20, 1009-1017.
233. Wriggers, P. (2002) Computational Contact Mechanics. John Wiley and Sons, UK.
234. Wunk, M.P. (1974) Quasi-static extension of a tensile crack contained in a viscoelastic-plastic solid. Journal of Applied Mechanics, 41, 234-242.
235. Xiao, Q.Z. and Karihaloo, B.L. (2006) Improving the accuracy of XFEM crack tip fields using higher order quadrature and statically admissible stress recovery. International Journal for Numerical Methods in Engineering, 66, 1378-1410.
236. Xu, J. (2005) Meshfree methods and extended finite element methods for arbitrary discontinuities. PhD dissertation, Theoretical and Applied Mechanics, Northwestern University, USA.
237. Ying, L. (1982) A note on the singularity and the strain energy of singular elements. International Journal for Numerical Methods in Engineering, 18, 31-39.
238. Zabaras, N., Ganapathysubramanian, B. and Tan, L. (2006) Modelling dendritic solidification with melt convection using the extended finite element method. Journal of Computational Physics, 218 (1), 200-227.
239. Zi, G. and Belytschko, T. (2003) New crack-tip elements for XFEM and applications to cohesive cracks. International Journal for Numerical Methods in Engineering, 57, 2221-2240.
240. Zi, G., Song, J.H., Budyn, E., Lee, S.H. and Belytschko, T. (2004) A method for growing multiple cracks without remeshing and its application to fatigue crack growth. Modeling and Simulations for Matererial Science and Engineering, 12, 901-915.
241. Zi, G., Chen, H., Xu, J. and Belytschko, T. (2005) The extended finite element method for dynamic fractures. Shock and Vibration, 12, 9-23.
242. Zienkiewicz, O.C. (1977) A new look at Newmark, Houbolt and other time stepping formulae, a weighted residual approach. Earthquake Engineering and Structural Dynamics, 5, 413-418.
243. Zienkiewicz, O.C. and Codina, R. (1995) A general algorithm for compressible and incompressible flow, Part I. The split characteristic based scheme. International Journal for Numerical Methods in Fluids, 20, 869-885.
244. Zienkiewicz, O.C., Taylor, R.L. and Zhu, J.Z. (2005) The Finite Element Method, 6th edn. Elsevier, USA.