The effect of porcelain thickness and surface liner application on the fracture behavior of a ceramic system

Dental Materials

Volumn 27, Issue 9, 2011, Pages 948-953

  Benetti, Paula ^a   Pelogia, Fernanda ^a   Valandro, Luiz Felipe ^b   Bottino, Marco Antonio ^a   Bona, Alvaro Della ^c  

^a SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

^b FEDERAL UNIVERSITY OF SANTA MARIA   (Brazil)

^c UNIVERSITY OF PASSO FUNDO   (Brazil)

Author keywords

Ceramic; Flexural strength; Liner; Stress concentration; Thickness

Indexed keywords

3-POINT BENDING; CERAMIC; CERAMIC SYSTEMS; FRACTURE BEHAVIOR; FRACTURE INITIATION; LINER; MAXIMUM LOAD; ONE-WAY ANOVA; PORCELAIN VENEERS; THICKNESS; WEIBULL MODULUS; ZIRCONIA-BASED CERAMICS;

BENDING STRENGTH; PORCELAIN; STRESS CONCENTRATION; WEIBULL DISTRIBUTION; YTTRIA STABILIZED ZIRCONIA; ZIRCONIA;

FRACTURE;

ZIRCONIUM; ZIRCONIUM OXIDE;

ANALYSIS OF VARIANCE; ARTICLE; DENTAL PROCEDURE; DENTAL SURGERY; DENTURE; MATERIALS TESTING; PLIABILITY; SURFACE PROPERTY; SURVIVAL; TENSILE STRENGTH; TOOTH PROSTHESIS;

ANALYSIS OF VARIANCE; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; DENTAL VENEERS; MATERIALS TESTING; PLIABILITY; SURFACE PROPERTIES; SURVIVAL ANALYSIS; TENSILE STRENGTH; ZIRCONIUM;

EID: 80051470857     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2011.05.009     Document Type: Article

References (42)

1. I. Denry, and J.R. Kelly State of the art of zirconia for dental applications Dent Mater 24 3 2008 299 307
2. J.R. Kelly, and I. Denry Stabilized zirconia as a structural ceramic: an overview Dent Mater 24 3 2008 289 298
3. A. Della Bona Bonding to ceramics: scientific evidences for clinical dentistry first ed. 2009 Artes Médicas São Paulo
4. M. Guazzato, K. Proos, L. Quach, and M.V. Swain Strength, reliability and mode of fracture of bilayered porcelain/zirconia (Y-TZP) dental ceramics Biomaterials 25 20 2004 5045 5052 (Pubitemid 38520834)
5. P. Pittayachawan, A. McDonald, A. Petrie, and J.C. Knowles The biaxial flexural strength and fatigue property of Lava Y-TZP dental ceramic Dent Mater 23 8 2007 1018 1029 (Pubitemid 46907965)
6. A. Vichi, C. Louca, G. Corciolani, and M. Ferrari Color related to ceramic and zirconia restorations: a review Dent Mater 27 1 2011 97 108
7. C.J. Goodacre, G. Bernal, K. Rungcharassaeng, and J.Y. Kan Clinical complications in fixed prosthodontics J Prosthet Dent 90 1 2003 31 41 (Pubitemid 37304902)
8. Della Bona, and J.R. Kelly The clinical success of all-ceramic restorations JADA 139 2008 8S 13S
9. R.P. Christensen, and B.J. Ploeger A clinical comparison of zirconia, metal and alumina fixed-prosthesis frameworks veneered with layered or pressed ceramic: a three-year report J Am Dent Assoc 141 11 2010 1317 1329
10. M.J. Tholey, M.V. Swain, and N. Thiel SEM observations of porcelain Y-TZP interface Dent Mater 25 2009 857 862
11. M.V. Swain Unstable cracking (chipping) of veneering porcelain on all-ceramic dental crowns and fixed partial dentures Acta Biomater 5 5 2009 1668 1677
12. P. Benetti, J.R. Kelly, and A. Della Bona Evaluation of thermal compatibility between core and veneer dental ceramics using shear bond strength test and contact angle measurement Dent Mater 26 8 2010 743 750
13. A. Sundh, and G. Sjögren A comparison of fracture strength of yttrium-oxide-partially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics J Oral Rehabil 31 7 2004 682 688 (Pubitemid 38953624)
14. P.C. Guess, A. Kulis, S. Witkowski, M. Wolkewitz, Y. Zhang, and J.R. Strub Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling Dent Mater 24 11 2008 1556 1567
15. M.N. Aboushelib, C.J. Kleverlaan, and A.J. Feilzer Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: Zirconia veneering ceramics Dent Mater 22 9 2006 857 863 (Pubitemid 44148813)
16. M. Guazzato, T.R. Walton, W. Franklin, G. Davis, C. Bohl, and I. Klineberg Influence of thickness and cooling rate on development of spontaneous cracks in porcelain/zirconia structures J. Aust Dent 55 3 2010 306 310
17. A. Shirakura, H. Lee, A. Geminiani, C. Ercoli, and C. Feng The influence of veneering porcelain thickness of all-ceramic and metal ceramic crowns on failure resistance after cyclic loading J Prosthet Dent 101 2 2009 119 127
18. International Organization for Standardization. ISO 6872 Dental ceramics third ed 2008 International Organization for Standardization Geneva
19. W.C. Young, and R.G. Budynas Roark's formulas for stress and strain seventh ed 2002 McGraw-Hill Boston
20. A. Della Bona, J.K. Anusavice, and P.H. DeHoff Weibull analysis and flexural strength of hot-pressed core and veneer ceramic structures Dent Mater 19 7 2003 662 669
21. B.E. Pjetursson, W.C. Tan, K. Tan, U. Brägger, M. Zwahlen, and N.P. Lang A systematic review of the survival and complication rates of resin-bonded bridges after an observation period of at least 5 years Clin Oral Implant Res 19 2 2008 131 141
22. J.R. Kelly, J.A. Tesk, and J.A. Sorensen Failure of all ceramic fixed partial denture in vitro and in vivo: analysis and modeling J Dent Res 74 6 1995 1253 1258
23. S.N. White, V.G. Miklus, E.A. McLaren, L.A. Lang, and A.A. Caputo Flexural strength of a layered zirconia and porcelain dental all-ceramic system J Prosthet Dent 94 2 2005 125 131 (Pubitemid 41024900)
24. G. Göstemeyer, M. Jendras, M.P. Dittmer, F.W. Bach, M. Stiesch, and P. Kohorst Influence of cooling rate on zirconia/veneer interfacial adhesion Acta Biomater 6 12 2010 4532 4538
25. A. Sundh, M. Molin, and G. Sjögren Fracture resistance of yttrium oxide partially-stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing Dent Mater 21 5 2005 476 482 (Pubitemid 40467038)
26. P. Baldissara, A. Llukacej, L. Ciocca, F.L. Valandro, and R. Scotti Translucency of zirconia copings made with different CAD/CAM systems J Prosthet Dent 104 1 2010 6 12
27. M.J. Heffernan, S.A. Aquilino, A.M. Diaz-Arnold, D.R. Haselton, C.M. Stanford, and M.A. Vargas Relative translucency of six all-ceramic systems. Part II: Core and veneer materials J Prosthet Dent 88 1 2002 10 15 (Pubitemid 40433899)
28. J. Tinschert, D. Zwez, R. Marx, and K.J. Anusavice Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics J Dent 28 7 2000 529 535
29. F. Filser, P. Kocher, and F. Weibel Reliability and strength of all-ceramic dental restorations fabricated by direct ceramic machining (DCM) Int J Comput Dent 4 2 2001 89 106
30. B. Taskonak, G.A. Borges, J.J. Mecholsky, K.J. Anusavice, B.K. Moore, and J. Yan The effects of viscoelastic parameters on residual stress development in a zirconia/glass bilayer dental ceramic Dent Mater 24 9 2008 1149 1155
31. P.H. DeHoff, and J.K. Anusavice Shear relaxation of dental ceramics determined from creep behavior Dent Mater 20 8 2004 717 725
32. De Jager, M. de Kler, and J.M. Van Der Zel The influence of different core materials on the FEA-determined stress distribution in dental crowns Dent Mater 22 3 2006 234 242 (Pubitemid 43199612)
33. H.M. Al-Dohan, P. Yaman, J.B. Dennison, M.E. Razzoog, and B.R. Lang Shear strength of core-veneer interface in bi-layered ceramics J Prosthet Dent 91 2004 349 355 (Pubitemid 38515795)
34. G. Isgr, C.J. Kleverlaan, H. Wang, and A.J. Feilzer The influence of multiple firing on thermal contraction of ceramic materials used for the fabrication of layered all-ceramic dental restorations Dent Mater 21 6 2005 557 564 (Pubitemid 40655130)
35. P.H. DeHoff, K.J. Anusavice, and N. Gotzen Viscoelastic finite element analysis of an all-ceramic fixed partial denture J Biomech 39 1 2006 40 48 (Pubitemid 41585007)
36. P.H. DeHoff, A.A. Barrett, R.B. Lee, and K.J. Anusavice Thermal compatibility of dental ceramic systems using cylindrical and spherical geometries Dent Mater 24 6 2008 744 752 (Pubitemid 351626156)
37. P.H. DeHoff, and K.J. Anusavice Viscoelastic finite element stress analysis of the thermal compatibility of dental bilayer ceramic systems Int J Prosthet 22 1 2009 56 61
38. M. Tholey, N. Thiel, S. Schindler, S. Rues, and J. Lenz Temperaturgradienten in Kronen mit Gerüsten aus Zirkoniumdioxid (Y-TZP) Quintess Zahntech 36 9 2010 1184 1198
39. N.P. Bansal, and R.H. Doremus Handbook of glass properties 1986 Academic Press Orlando
40. G.W. Scherer Relaxation in glass and composites 1986 Wiley New York
41. S.M. Salazar Marocho, A.R. Studart, M.A. Bottino, and A. Della Bona Mechanical strength and subcritical crack growth under wet cyclic loading of glass-infiltrated dental ceramics Dent Mater 26 5 2010 483 490
42. American Society for Testing Materials ASTM C 1239-07: Standard practice for reporting uniaxial strength data and estimating Weibull distribution parameters for advanced ceramics ASTM Int 15 01 2007 1 19