Study of high-frequency sound signals for tool wear monitoring in micromilling

International Journal of Advanced Manufacturing Technology

Volumn 66, Issue 9-12, 2013, Pages 1785-1792

  Lu, Ming Chyuan ^a   Wan, Bing Syun ^a  

^a NATIONAL CHUNG HSING UNIVERSITY   (Taiwan)

Author keywords

Hidden Markov model (HMM); Micromilling; Sound signals; Tool wear monitoring

Indexed keywords

FEATURE SELECTION ALGORITHM; HIDDEN MARKOV MODEL(HMM); HIGH-FREQUENCY SOUNDS; MICRO MILLING; MICROMILLING PROCESS; SELECTION ALGORITHM; SOUND SIGNAL; TOOL WEAR MONITORING;

ALGORITHMS; BANDWIDTH; HIDDEN MARKOV MODELS; MICROMACHINING; MILLING (MACHINING);

WEAR OF MATERIALS;

EID: 84879118858     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-012-4458-8     Document Type: Article

References (39)

1. Masuzawa T (2000) State of the art of micromachining. Annals of CIRP 49(2):473-488
2. Dornfeld D, Min S, Takeuchi Y (2006) Recent advances in mechanical micromachining. Annals of CIRP 55:745-768
3. Chae J, Park S, Freiheit T (2006) Investigation of micro-cutting operations. Int J Mach Tool Manu 46:313-332
4. Jáuregui AL, Siller HR, Rodríguez CA, Elías- Zúñiga A (2010) Evaluation of micromechanical manufacturing processes for microfluidic devices. Int J Adv Manuf Technol 48:963-972
5. Byrne G, Dornfeld D, Inasaki I, Ketteler G, König W, Teti R (1995) Tool condition monitoring (TCM) - the status of research and industrial application. Annals of CIRP 44(2):541-567
6. Rehorn A, Jiang J, Orban P (2005) State-of-the-art methods and results in tool condition monitoring: a review. Int J Adv Manuf Technol 26:693-710
7. Jemielniak K, Urbanski T, Kossakowska J, Bombinski S (2012) Tool condition monitoring based on numerous signal features. Int J Adv Manuf Technol 59(1-4):73-81
8. Dimla DE, Dimla DE Snr (2000) Sensor signals for tool-wear monitoring in metal cutting operations - a review of methods. Int J Mach Tool Manu 40:1073-1098
9. Heinemann R, Hinduja S, Barrow G (2007) Use of process signals for tool wear progression sensing in drilling small deep holes. Int J Adv Manuf Technol 33(3-4):1-6
10. Hsieh WH, Lu MC, Chiou SJ (2012) Application of backpropagation neural network for spindle vibration-based tool wear monitoring in micro-milling. Int J Adv Manuf Technol 61(1-4):53-61
11. Chen T, Lu M, Chiou S, Lin C, Lee, M (2009) Study of sound signal for tool wear monitoring system in micro-milling processes. ASME 2009 International Manufacturing Science and Engineering Conference, October, West Lafayette, Indiana, USA, 2009-84178
12. Weller EJ, Schrier HM, Weichbrodt B (1969) What sound can be expected from a worn tool. ASME J Eng Ind 91:525-534
13. Takata S, Ahn JH, Miki M, Miyao Y, Sata T (1986) A sound monitoring system for fault detection of machine and machining states. Annals of CIRP 35(1):289-292
14. Sadat AB, Raman S (1987) Detection of tool flank wear using acoustic signature analysis. Wear 115:265-272
15. Delio T, Tlusty J, Smith S (1992) Use of audio signals for chatter detection and control. ASME J Eng Ind 114(2):146-157
16. Ahn J, Lim H, Takata S, Sata T (1994) Machining process/tool wear monitoring system based on real-time sound recognition. J Jpn Soc Precis Eng 60(8):1144-1148
17. Kopac J, Sali S (2001) Tool wear monitoring during the turning process. J Mater Process Technol 113:312-316
18. Samraj A, Sayeed S, Raja JE, Hossen J, Rahman A (2011) Dynamic clustering estimation of tool flank wear in turning process using SVD models of the emitted sound signals. Proc World Acad Sci Eng Tech 80:1322-1326
19. Dong Q, Ai C, Wang N (2006) The study of tool wear and breakage based on the characteristic analysis of acoustic spectrum. Mater Sci Forum 532-533:197-200
20. Ai CS, Sun YJ, He GW, Ze XB, Li W, Mao K (2012) The milling tool wear monitoring using the acoustic spectrum. Int J Adv Manuf Technol 61(5-8):457-463
21. Boutros T, Liang M (2011) Detection and diagnosis of bearing and cutting tool faults using hidden Markov models. Mech Syst Signal Process 25(6):2102-2124
22. Salgado D, Alonso F (2007) An approach based on current and sound signals for in-process tool wear monitoring. Int J Mach Tool Manu 47:2140-2152
23. Kandili I, Sönmez M, Ertunc HM, Çakir B (2007) Online monitoring of tool wear in drilling and milling by multi-sensor neural network fusion. Proceedings of the 2007 IEEE International Conference on Mechatronics and Automation, August, Harbin, China 1388-1394
24. Tangjitsitcharoen S, Rungruang C, Pongsathornwiwat N (2011) Advanced monitoring of tool wear and cutting states in CNC turning process by utilizing sensor fusion. Adv Mater Res 189-193:377-384
25. Aliustaoglu C, Ertunc H, Ocak H (2009) Tool wear condition monitoring using a sensor fusion model based on fuzzy inference system. Mech Syst Signal Process 23:539-546
26. Tekiner Z, Yesilyurt S (2004) Investigation of the cutting parameters depending on process sound during turning of AISI 304 austenitic stainless steel. Mater Des 25:507-513
27. Lu M, Kannatey-Asibu E Jr (2002) Analysis of sound signal generation due to flank wear in turning. Trans ASME J Manuf Sci Engin 124:779-808
28. Lu M, Kannatey-Asibu E Jr (2004) Flank wear and process characteristic effect on system dynamics in turning. Trans ASME J Manuf Sci Engin 126:131-140
29. Johnson MT (2005) Capacity and complexity of HMM duration modeling techniques. IEEE Signal Processing Letters 12(5):407-410
30. Baruah P, Chinnam R (2005) HMMs for diagnostics and prognostics in machining processes. Int J Prod Res 43(6):1275-1293
31. Vallejo A Jr, Nolazco-Flores J, Morales-Menendez R, Enrique Sucar L, RodrIguez C (2005) Tool-wear monitoring based on continuous hidden Markov models. Lect Notes Comput Sci 3773:880-890
32. Jing K, Ni, K (2008) Pattern recognition of tool wear and failure prediction. Proceedings of the World Congress on Intelligent Control and Automation (WCICA) 6000-6005
33. Zhu K, Wong Y, Hong G (2009) Multi-category micro-milling tool wear monitoring with continuous hidden Markov models. Mech Syst Signal Process 23(2):547-560
34. Ertunc H, Loparo K, Ocak H (2001) Tool wear condition monitoring in drilling operations using hidden Markov models (HMMs). Int J Adv Manuf Technol 41(9):1363-1384
35. Zhu K, Wong Y, Hong G (2008) A comparative study of feature selection for hidden Markov model-based micro-milling tool wear monitoring. Mach Sci Technol 12(3):348-369
36. Zhang C, Yue X, ZhangX (2009) Cutting chatter monitoring using hidden Markov models. International Conference on Control. Automation and Systems Engineering (CASE 2009) 504-507
37. Atlas L, Mari O, Gary D (2000) Hidden Markov models for monitoring machine tool-wear. Int Conf Acoust Speech Signal Process Proceed 6:3887-3890
38. Vaseghi S (1996) Advanced signal processing and digital noise reduction. Wiley, Chichester
39. Emel E, Kannatey-Asibu E Jr (1988) Tool failure monitoring in turning by pattern recognition analysis of AE signals. ASME J Eng Ind 110:137-145