Two-body wear rate of CAD/CAM resin blocks and their enamel antagonists

Journal of Prosthetic Dentistry

Volumn 109, Issue 5, 2013, Pages 325-332

  Stawarczyk, Bogna ^a,c   Özcan, Mutlu ^a   Trottmann, Albert ^a   Schmutz, Felix ^a   Roos, Malgorzata ^b   Hämmerle, Christoph ^a  

^a UNIVERSITY OF ZURICH   (Switzerland)

^b UNIVERSITY OF ZURICH   (Switzerland)

^c UNIVERSITY OF MUNICH   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ACRYLIC ACID RESIN; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; CARBOPOL 940; DENTAL MATERIAL; DENTAL PORCELAIN; GLASS CERAMICS; METHACRYLIC ACID DERIVATIVE; METHACRYLIC ACID METHYL ESTER; POLY(METHYL METHACRYLATE); POLYURETHAN; RESIN; URETHANE DIMETHACRYLATE LUTING RESIN; VITA MARK II;

ARTICLE; CERAMICS; CHEMISTRY; COMPARATIVE STUDY; COMPUTER AIDED DESIGN; DENTAL RESTORATION WEAR; ENAMEL; HUMAN; MASTICATION; MECHANICAL STRESS; PATHOLOGY; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TEMPERATURE; TOOTH DISEASE;

ACRYLIC RESINS; BISPHENOL A-GLYCIDYL METHACRYLATE; BITE FORCE; CERAMICS; COMPOSITE RESINS; COMPUTER-AIDED DESIGN; DENTAL ENAMEL; DENTAL MATERIALS; DENTAL PORCELAIN; DENTAL RESTORATION WEAR; HUMANS; METHACRYLATES; METHYLMETHACRYLATES; MICROSCOPY, ELECTRON, SCANNING; POLYMETHYL METHACRYLATE; POLYURETHANES; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; TOOTH WEAR;

EID: 84877805195     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0022-3913(13)60309-1     Document Type: Article

References (21)

1. V Alt, M Hannig, B Wostmann, M Balkenhol Fracture strength of temporary fixed partial dentures: CAD/CAM versus directly fabricated restorations Dent Mater 27 2011 339 347
2. M Balkenhol, MC Mautner, P Ferger, B Wostmann Mechanical properties of provisional crown and bridge materials: chemical-curing versus dual-curing systems J Dent 36 2008 15 20
3. Basaran E Göncü, E Ayna, PK Vallittu, LV Lassila Load-bearing capacity of handmade and computer-aided design - computer-aided manufacturing-fabricated three-unit fixed dental prostheses of particulate filler composite Acta Odontol Scand 69 2011 144 150
4. B Stawarczyk, A Ender, A Trottmann, M Özcan, J Fischer, CHF Hämmerle Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: Effect of aging regimens Clin Oral Investig 16 2012 1669 1677
5. T Hooshmand, S Parvizi, A Keshvad Effect of surface acid etching on the biaxial flexural strength of two hot-pressed glass ceramics J Prosthodont 17 2008 415 419
6. J Fischer, S Roeske, B Stawarczyk, CH Hammerle Investigations in the correlation between Martens hardness and flexural strength of composite resin restorative materials Dent Mater J 29 2010 188 192
7. D Chaysuwan, K Sirinukunwattana, K Kanchanatawewat, G Heness, K Yamashita Machinable glass-ceramics forming as a restorative dental material Dent Mater J 30 2011 358 367
8. International Organization for Standardization ISO14569-2: Dental materials-Guidance on testing of wear-Part 2: Wear by two/or three body contact 2001 International Organization for Standardization Geneva, Switzerland http://www.iso.org/iso/store.htm
9. M Rosentritt, M Behr, R Gebhard, G Handel Influence of stress simulation parameters on the fracture strength of all-ceramic fixed-partial dentures Dent Mater 22 2006 176 182
10. M Rosentritt, G Siavikis, M Behr, C Kolbeck, G Handel Approach for valuating the significance of laboratory simulation J Dent 36 2008 1048 1053
11. M Rosentritt, M Behr, JM van der Zel, AJ Feilzer Approach for valuating the influence of laboratory simulation Dent Mater 25 2009 348 352
12. S Hahnel, M Behr, G Handel, M Rosentritt Two-body wear of artificial acrylic and composite resin teeth in relation to antagonist material J Prosthet Dent 101 2009 269 278
13. V Preis, M Behr, C Kolbeck, S Hahnel, G Handel, M Rosentritt Wear performance of substructure ceramics and veneering porcelains Dent Mater 27 2011 796 804
14. A Johansson, T Haraldson, R Omar, S Kiliaridis, GE Carlsson An investigation of some factors associated with occlusal tooth wear in a selected high-wear sample Scand J Dent Res 101 1993 407 415
15. A Johansson, S Kiliaridis, T Haraldson, R Omar, GE Carlsson Covariation of some factors associated with occlusal tooth wear in a selected high-wear sample Scand J Dent Res 101 1993 398 406
16. LH Mair, TA Stolarski, RW Vowles, CH Lloyd Wear: mechanisms, manifestations and measurement. Report of a workshop J Dent 24 1996 141 148
17. SK Kim, KN Kim, IT Chang, SJ Heo A study of the effects of chewing patterns on occlusal wear J Oral Rehabil 28 2001 1048 1055
18. SD Heintze How to qualify and validate wear simulation devices and methods Dent Mater 22 2006 712 734
19. P Lambrechts, E Debels, K Van Landuyt, M Peumans, Van Meerbeek How to simulate wear? Overview of existing methods Dent Mater 22 2006 693 701
20. B Stawarczyk, R Egli, M Roos, M Ozcan, CHF Hämmerle The impact of in vitro aging on the mechanical and optical properties of indirect veneering composite resins J Prosthet Dent 106 2011 386 398
21. B Stawarczyk, M Ozcan, F Schmutz, A Trottmann, M Roos, CHF Hämmerle Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists Acta Odont Scand 71 2013 102 112