Long range internal stresses in single-phase crystalline materials

International Journal of Plasticity

Volumn 45, Issue , 2013, Pages 44-60

  Kassner, M E ^a   Geantil, P ^a   Levine, L E ^b  

^a University of Southern California   (United States)

^b NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

Author keywords

Bauschinger effect cyclic deformation; Long range internal stress; X ray microbeam

Indexed keywords

DEFORMATION; EDGE DISLOCATIONS; PILES; PLASTICITY;

CYCLIC DEFORMATIONS; DEFORMED MICROSTRUCTURE; DISLOCATION DENSITIES; DISLOCATION DIPOLE; ELEVATED STRESS; MICRO BEAMS; MONOTONIC DEFORMATION; SINGLE PHASE;

CRYSTALLINE MATERIALS;

EID: 84875823586     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2012.10.003     Document Type: Conference Paper

References (67)

1. Argon, A.S., Takeuchi, S., 1981. Internal stresses in power-law creep. Acta Metall. 29, 1877.
2. Basinski, Z.S., Basinski, S.J., 1992. Fundamental aspects of low amplitude cyclic deformation in face-centered cubic crystals. Prog. Mater. Sci. 36, 89-148.
3. Biermann, H., Ungar, T., Pfannenmüller, T., Hoffmann, G., Borbély, A., Mughrabi, H., 1993. Local variations of lattice parameter and long-range internal stresses during cyclic deformation of polycrystalline copper. Acta Metal. Mater. 41, 2743-2753.
4. Blum W., 2012. Personal Communication.
5. Borbély, A., Hoffmann, G., Aernoudt, E., Ungar, T., 1997. Dislocation arrangement and residual long-range internal stresses in copper single crystals at large deformations. Acta Mater. 45, 89-98.
6. Borbély, A., Blum, W., Ungar, T., 2000. On the relaxation of the long-range internal stresses of deformed copper upon unloading. Mater. Sci. Eng. 276, 186-194.
7. Bretschneider, J., Holste, C., Tippelt, B., 1997. Cyclic plasticity of nickel single crystals at elevated temperatures. Acta Mater. 45, 3775-3783.
8. Bretschneider, J., 1998. Private communication. Grenada, Spain.
9. Delos-Reyes, M.A., Kassner, M.E., Levine, L.E., 2003. X-ray diffraction and the existence of long-range internal stresses. In: Kahn, A.S., Kazmi, R., Zhou, J. (Eds.), Dislocations, Plasticity and Metal Forming. Neat Press, Fullerton, MD, p. 264.
10. Gaal, I., 1984. In: Hessel Andersen, N., Eldrup, M., Hansen, N., Juul Jensen, D., Leffers, T., Lilholt, H., Pedersen, O.B., Singh, B.N. (Eds.), Proc. Fifth Riso Int. Symp. on Metallurgy and Mat. Sci. Riso Nat. Lab, Roskilde, DK, pp. 249-254.
11. Gibeling, J.C., Nix, W.D., 1980. A numerical study of long range internal stresses associated with subgrain boundaries. Acta Metall. 28, 1743-1752.
12. Gibeling, J.C., Nix, W.D., 1981. Observations of anelastic backflow following stress reductions during creep of pure metals. Acta Metall. 29, 1769.
13. Groma, I., 1998. X-ray line broadening due to an inhomogeneous dislocation distribution. Phys. Rev. B 57, 7535-7542.
14. Hansen, N., 1999. Private Communication. Cincinnati, OH.
15. Hecker, M., Thiele, E., Holste, C., 1997. X-ray diffraction analysis of internal stresses in the dislocation structure of cyclically deformed nickel single crystals. Mater. Sci. Eng. A234-236, 806-809.
16. Jakobsen, B., Poulsen, H.F., Lienert, U., Almer, J., Shastri, S.D., Sørensen, H.O., Gundlach, C., Pantleon, W., 2006. Formation and subdivision of deformation structures during plastic deformation. Science 32, 889-892.
17. Kassner, M.E., Ziaai-Moayyed, A.A., Miller, A.K., 1985. Some trends observed in the elevated-temperature kinematic and isotropic hardening of type 304 stainless steel. Metall. Trans. 16A, 1069-1076.
18. m. Metall. Trans. 20, 2001-2010.
19. Kassner, M.E., Wall, M.A., Sleeswyk, A.W., 1991. Some observations during in-situ reversed deformation of aluminum single crystals in the HVEM using the X-Y method. Scripta Metall. Mater. 25, 1701-1706.
20. Kassner, M.E., McQueen, H.J., Pollard, J., Evangelista, E., Cerri, E., 1994a. Restoration mechanisms in large-strain deformation of high purity aluminum at ambient temperature. Scripta Metall. Mater. 31, 1331-1336.
21. Kassner, M.E., Pollard, J., Evangelista, E., Cerre, E., 1994b. Restoration mechanisms in large-strain deformation of high purity aluminum at ambient temperature and the determination of the existence of "steady-state". Acta Metall. Mater. 42, 3223-3230.
22. Kassner, M.E., Wall, M.A., Delos-Reyes, M.A., 1997. Microstructure and mechanisms of cyclic deformation of aluminum single crystals at 77 K. Metall. Mater. Trans. 28A, 595-609.
23. Kassner, M.E., Wall, M.A., 1999. Microstructure and mechanisms of cyclic deformation in aluminum single crystals at 77 K: Part II. Edge dislocation dipole heights. Metall. Mater. Trans. 30A, 777-779.
24. Kassner, M.E., Perez-Prado, M.-T., Vecchio, K.S., Wall, M.A., 2000. Determination of internal stresses in cyclically deformed Cu single crystals using CBED and dislocation dipole separation measurements. Acta Mater. 48, 4247-4254.
25. Kassner, M.E., Perez-Prado, M.T., Long, M., Vecchio, K.S., 2002. Dislocation microstructure and internal-stress measurements by convergent-beam electron diffraction on creep-deformed Cu and Al. Metall. Mater. Trans. 33A, 311-318.
26. Kassner, M.E., Geanti, P., Levine, L.E., Larson, B.C., 2009. Long range internal stresses in monotonically and cyclically deformed single crystals. Int. J. Mater. Res. 100, 33.
27. Kassner, M.E., 2009. Fundamentals of Creep in Metals and Alloys. Elsevier, Oxford.
28. Khan, S.M.A., Zbib, H.M., Hughes, D.A., 2004. Modeling planar dislocation boundaries using multi-scale dislocation dynamics plasticity. Int. J. Plasticity 20, 1059.
29. Krivoglaz, M.A., Ryaboshapka, K.P., 1963. Order-disorder phenomena in alloys. Phys. Met. Metall. 12, 465.
30. Kuhlmann-Wilsdorf, D., 1999. Deformation bands, the LED theory and their importance in texture development: Part II. Theoretical conclusions. Metall. Mater. Trans. 30A, 2391.
31. Laird, C., 1983. In: Nabarro, F.R.N. (Ed.), Dislocations in Solids, vol. 6. North Holland, pp. 1-120.
32. Larson, B.C., Yang, W., Ice, G.E., Budai, J.D., Tischler, J.S., 2002. Three-dimensional X-ray structural microscopy with submicrometre resolution. Nature 415, 887-890.
33. Legros, M., Ferry, O., Houdellier, F., Jacques, A., George, A., 2008. Fatigue of single crystalline silicon: mechanical behaviour and TEM observations. Mater. Sci. Eng. A483-484, 353-364.
34. Lepinoux, J., Kubin, L.P., 1985. In situ TEM observations of the cyclic dislocation behaviour in persistent slip bands of copper single crystals. Philos. Mag. 57, 675-696.
35. Levine, L.E., Larson, B.C., Yang, W., Kassner, M.E., Tischler, J.Z., Delos-Reyes, M.A., Fields, R.J., Liu, W., 2006. X-ray microbeam measurements of individual dislocation cell elastic strains in deformed single-crystal copper. Nat. Mater. 5, 619-622.
36. Levine, L.E., Geantil, P., Larson, B.C., Tischler, J., Kassner, M.E., Liu, W., Stoudt, M.R., Tavazza, F., 2011. Impact of dislocation cell elastic strain variations on line profiles from deformed copper. Acta Mater. 59, 5803-5811.
37. Levine, L.E., Geantil, P., Larson, B.C., Tischler, J.Z., Kassner, M.E., Liu, W., 2012. Validating classical line profile analyses using microbeam diffraction from individual dislocation cell walls and cell interiors. J. Appl. Cryst. 45, 157-165.
38. McQueen, H.J., Blum, W., Straub, S., Kassner, M.E., 1993. Dynamic grain growth: a restoration mechanism in 99.999 Al. Scripta Metall. Mater. 28, 1299-1304.
39. Morris, M.A., Martin, J.L., 1984. Evolution of internal stresses and substructure during creep at intermediate temperatures. Acta Metall. 32, 1609-1623.
40. Mott, N.F., 1952. A theory of work-hardening of metal crystals. Philos. Mag. A 43, 1151.
41. Mughrabi, H., 1983. Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals. Acta Metall. 31, 1367-1379.
42. Mughrabi, H., Ungar, T., Kienle, W., Wilkens, M., 1986. Long-range internal stresses and asymmetric X-ray line-broadening in tensile-deformed [001]-orientated copper single crystals. Philos. Mag. A 53, 793-813.
43. Mughrabi, H., 1987. A two-parameter description of heterogeneous dislocation distributions in deformed metal crystals. Mater. Forum 10, 1.
44. Mughrabi, H., Ungar, T., 2002. Long range internal stresses in deformed single-phase materials: the composite model and its consequences. Dislocations in Solids. Elsevier, Amsterdam, p. 345.
45. Mughrabi, H., Pschenitzka, F., 2005. Constrained glide and interaction of bowed-out screw dislocations in confined channels. Philos. Mag. 85, 3029-3045.
46. Mughrabi, H., 2006a. Deformation-induced long-range internal stresses and lattice plane misorientations and the role of geometrically necessary dislocations. Philos. Mag. A 86, 4037-4054.
47. Mughrabi, H., 2006b. Dual role of deformation-induced geometrically necessary dislocations with respect to lattice plane misorientations and/or long-range internal stresses. Acta Mater. 54, 3417-3427.
48. Nabarro, F.R.N., de Villiers, H., 1995. Physics of Creep. Taylor and Francis, Belfast.
49. Neumann, P., 1999. Private Communication. San Diego, CA.
50. Nix, W.D., Ilschner, B., 1980. Mechanisms controlling creep of single phase metals and alloys. In: Haasen, P., Gerold, V., Kostorz, G. (Eds.), Strength of Metals and Alloys. Pergamon Press, Oxford, p. 1503.
51. Orowan, E., 1959. Causes and effects of internal stresses. In: Rassweiler, G.M., Grube, W.L. (Eds.), Internal Stresses and Fatigue in Metals. General Motors Symposium. Elsevier, Amsterdam, pp. 59-80.
52. Pantleon, W., Poulsen, H., Almer, J., Lienert, U., 2004. In situ X-ray peak shape analysis of embedded individual grains during plastic deformation of metals. Mater. Sci. Eng. 387-389A, 339-342.
53. Pedersen, O., Brown, L., Stobbs, W., 1981. The Bauschinger effect in copper. Acta Metall. 29, 1843-1850.
54. Schafler, E., Simon, K., Bernstorff, S., Hanak, P., Tichy, G., Ungar, T., Zehetbauer, M.J., 2005. A second-order phase-transformation of the dislocation structure during plastic deformation determined by in situ synchrotron X-ray diffraction. Acta Mater. 53, 215-322.
55. Sedlacek, R., Blum, W., Kratochvil, J., Forest, S., 2002. Subgrain formation during deformation: physical origin and consequences. Metall. Mater. Trans. 33A, 319-327.
56. Seeger, A., Diehl, J., Mader, S., Rebstock, H., 1957. Work-hardening and work-softening of face-centred cubic metal crystals. Philos. Mag. 2, 323-350.
57. Sleeswyk, A.W., James, M.R., Plantinga, D.H., Maathius, W.S.T., 1978. Reversible strain in cyclic plastic deformation. Acta Metall. 26, 1265-1271.
58. Straub, S., Blum, W., Maier, H.J., Ungar, T., Borbély, A., Renner, H., 1996. Long-range internal stresses in cell and subgrain structures of copper during deformation at constant stress. Acta Mater. 44, 4337-4350.
59. Thiehsen, K.E., Kassner, M.E., Pollard, J., Hiatt, D.R., Bristow, B.M., 1993a. The effect of nickel, chromium, and primary. Metall. Trans. 24, 1819-1826.
60. Thiehsen, M.E., Kassner, M.E., Hiatt, D.R., Bristow, B., 1993b. Titanium 92. TMS, Warrendale, PA, pp. 1717-1724.
61. Tippelt, B., Bretschneider, J., Hahner, P., 1997. The dislocation microstructure of cyclically deformed nickel single crystals at different temperatures. Phys. Stat. Sol. A 163, 11-26.
62. Ungar, T., Mughrabi, H., Rönnpagel, D., Wilkens, M., 1984. X-ray line-broadening study of the dislocation cell structure in deformed [001]-orientated copper single crystals. Acta Metall. 32, 333.
63. Ungar, T., Mughrabi, H., Wilkens, M., Hilscher, A., 1991. Long-range internal stresses and asymmetric X-ray line-broadening in tensile-deformed [001]-oriented copper single crystals: the correction of an erratum. Philos. Mag. A 64, 495-496.
64. Vogerand, S., Blum, W., 1990. In: Wilshire, B., Evans, R.W. (Eds.), Fracture of Engineering Materials and Structures. Inst. Metals, London, pp. 67-79.
65. Weertman, J., Weertman, J.D., 1992. Elementary Dislocation Theory. Oxford Press, Oxford, p. 127.
66. Wilkins, M., 1970. The determination of density and distribution of dislocations in deformed single crystals from broadened X-ray diffraction profiles. Phys. Stat. Sol. A 2, 359-370.
67. Yan, J., 1998. Study of the Bauschinger effect in various spring steels. Thesis, Univ. Toronto, Dept. Metallurgy and Materials Sci.