Effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 20, Issue , 2013, Pages 19-28

  Özcan, Mutlu ^a   Melo, Renata M ^b   Souza, Rodrigo O A ^c   Machado, João P B ^d   Felipe Valandro, Luiz ^e   Botttino, Marco A ^b  

^a UNIVERSITY OF ZURICH   (Switzerland)

^b SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

^c FEDERAL UNIVERSITY OF PARAÍBA   (Brazil)

^d INSTITUTO NACIONAL DE PESQUISAS ESPACIAIS   (Brazil)

^e FEDERAL UNIVERSITY OF SANTA MARIA   (Brazil)

Author keywords

Air abrasion; Biaxial flexural strength; Silica coating; Y TZP; Zirconia

Indexed keywords

3D SURFACE; AIR ABRASION; BI-AXIAL FLEXURAL STRENGTH; CONTROL GROUPS; CYCLIC LOADINGS; MONOCLINIC PHASE; MONOCLINIC ZIRCONIA; ROCATEC; SILICA COATINGS; SURFACE CHARACTERISTICS; WEIBULL MODULUS; XRD; Y-TZP;

ABRASION; ALUMINUM; ALUMINUM COATINGS; BENDING STRENGTH; CYCLIC LOADS; PHASE TRANSITIONS; RAMAN SPECTROSCOPY; SILICA; SURFACE ROUGHNESS; TRIBOLOGY; WEIBULL DISTRIBUTION;

ZIRCONIA;

ALUMINUM OXIDE; SILICON DIOXIDE; ZIRCONIUM OXIDE;

AIR PARTICLE ABRASION PROTOCOL; ARTICLE; BIAXIAL FLEURAL STRENGTH; CONTROLLED STUDY; METHODOLOGY; PRESSURE; PRIORITY JOURNAL; RAMAN SPECTROMETRY; STRENGTH; X RAY DIFFRACTION;

AIR; DENTAL ETCHING; DENTAL MATERIALS; DENTAL STRESS ANALYSIS; ELASTIC MODULUS; HARDNESS; MATERIALS TESTING; PHASE TRANSITION; SILICON DIOXIDE; STRESS, MECHANICAL; SURFACE PROPERTIES; TENSILE STRENGTH; ZIRCONIUM;

EID: 84874581307     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2013.01.005     Document Type: Article

References (53)

1. Amaral R., Ozcan M., Valandro L.F., Balducci I., Bottino M.A. Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions. Journal of Biomedical Materials Research B Applied Biomaterials 2008, 85:1-9.
2. Attia A., Kern M. Effect of cleaning methods after reduced-pressure air abrasion on bonding to zirconia ceramic. Journal of Adhesive Dentistry 2011, 13:561-567.
3. Chevalier J. What future for zirconia as a biomaterial?. Biomaterials 2006, 27:535-543.
4. Curtis A.R., Wright A.J., Fleming G.J.P. The influence of simulated masticatory loading regimes on the biaxial flexure strength and reliability of a Y-TZP dental ceramic. Journal of Dentistry 2006, 34:317-325.
5. Curtis A.R., Wright A.J., Fleming G.J.P. The influence of surface modification techniques on the performance of a Y-TZP dental ceramic. Journal of Dentistry 2006, 34:195-206.
6. De Aza A.H., Chevalier J., Fantozzi G., Schehl M., Torrecillas R. Crack growth resistance of alumina, zirconia and zirconia toughened alumina ceramics for joint prostheses. Biomaterials 2002, 23:937-945.
7. Della Bona A., Donassollo T.A., Demarco F.F., Barrett A.A., Mecholsky J.J. Characterization and surface treatment effects on topography of a glass-infiltrated alumina/zirconia-reinforced ceramic. Dental Materials 2007, 23:769-775.
8. Denry I., Kelly J.R. State of the art of zirconia for dental applications. Dental Materials 2008, 24:299-307.
9. Deville S., Chevalier J., Gremillard L. Influence of surface finish and residual stresses on the ageing sensitivity of biomedical grade zirconia. Biomaterials 2006, 27:2186-2192.
10. Giordano R.A., Pelleiter L., Campbell S., Pober R. Flexural strength of an infused ceramic, glass ceramic, and feldspathic porcelain. Journal of Prosthetic Dentistry 1995, 73:411-418.
11. Guazzato M., Proos K., Quach L., Swain M.V. Strength, reliability and mode of fracture of bilayered porcelain/zirconia (Y-TZP) dental ceramics. Biomaterials 2004, 25:5045-5052.
12. Guazzato M., Albakry M., Ringer S.P., Swain M.V. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramic. Dental Materials 2004, 20:449-456.
13. Guazzato M., Quach L., Albakry M., Swain M.V. Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramic. Journal of Dentistry 2005, 33:9-18.
14. Guggenberger R. Rocatec system-adhesion by tribochemical coating. Deutsche zahnärztliche Zeitschrift 1989, 1989(44):874-876.
15. Hjerppe J., Vallittu P.K., Fröberg K., Lassila L.V. Effect of sintering time on biaxial strength of zirconium dioxide. Dental Materials 2009, 25:166-171.
16. Huang M., Thompson V.P., Rekow E.D., Soboyejo W.O. Modeling of water absorption induced cracks in resin-based composite supported ceramic layer structures. Journal of Biomedical Materials Research Part B: Applied Biomaterials 2008, 84:124-130.
17. International Organization for Standardization, 1998. Dental Ceramic: Amendment 1, ISO 6872. Geneva: ISO.
18. Itinoche M.K., Özcan M., Bottino M.A., Oyafuso D. Effect of mechanical cycling on the flexural strength of densely sintered ceramics. Dental Materials 2006, 22:1029-1034.
19. Kelly J.R. Perspectives on strength. Dental Materials 1995, 11:103-110.
20. Kelly J.R., Denry I. Stabilized zirconia as a structural ceramic: an overview. Dental Materials 2008, 24:289-298.
21. Kern M., Wegner S.M. Bonding to zirconia ceramic: adhesion methods and their durability. Dental Materials 1998, 14:64-71.
22. Kern M. Resin bonding to oxide ceramics for dental restorations. Journal of Adhesion Science and Technology 2009, 23:1097-1110.
23. 2. Journal of the American Ceramic Society 1981, 64:C72-C73.
24. Kosmac T., Oblak C., Jevnikar P., Funduk N., Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dental Materials 1999, 15:426-433.
25. Kosmac T., Oblak C., Jevnikar P., Funduk N., Marion L. Strength and reliability of surface treated Y-TZP dental ceramics. Journal of Biomedical Materials Research 2000, 53:304-313.
26. Larsson C., Holm L., Lovgren N., Kokubo Y., Von, S.Vult Fracture strength of four-unit Y-TZP FPD cores designed with varying connector diameter. An in-vitro study. Journal of Oral Rehabilitation 2007, 34:702-709.
27. Morena R., Beaudreau G.M., Lockwood P.E., Evans A.L., Fairhurst C.W. Fatigue of dental ceramics in a simulated oral environment. Journal of Dental Research 1986, 65:993-997.
28. Øilo M., Tvinnereim H.M., Gjerdet N.R. Qualitative and quantitative fracture analyses of high-strength ceramics. European Journal of Oral Sciences 2009, 117:187-193.
29. 4 all-ceramic crowns after chewing simulation. Journal of Oral Rehabilitation 2006, 33:827-832.
30. Özcan M., Pfeiffer P., Nergiz I. A brief history and current status of metal-and ceramic surface-conditioning concepts for resin bonding in dentistry. Quintessence International 1998, 29:713-724.
31. Özcan M. Evaluation of alternative intra-oral repair techniques for fractured ceramic-fused-to-metal restorations. Journal of Oral Rehabilitation 2003, 30:194-203.
32. Özcan M., Vallittu P.K. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dental Materials 2003, 19:725-731.
33. Papanagiotou H.P., Morgano S.M., Giordano R.A., Pober R. In vitro evaluation of low-temperature aging effects and finishing procedures on the flexural strength and structural stability of Y-TZP dental ceramics. Journal of Prosthetic Dentistry 2006, 96:154-164.
34. Pittayachawan P., McDonald A., Petrie A., Knowles J.C. The biaxial flexural strength and fatigue property of LavaTM Y-TZP dental ceramic. Dental Materials 2007, 23:1018-1029.
35. Sasse M., Eschbach S., Kern M. Randomized clinical trial on single retainer all-ceramic resin-bonded fixed partial dentures: influence of the bonding system after up to 55 months. Journal of Dentistry 2012, 40:783-786.
36. Sato H., Yamada K., Pezzotti G., Nawa M., Ban S. Mechanical properties of dental zirconia ceramics changed with sandblasting and heat treatment. Dental Materials Journal 2008, 27:408-414.
37. Sherrill C.A., O'Brien W.J. Transverse strength of aluminous and feldspathic porcelain. Journal of Dental Research 1974, 53:683-690.
38. Studart A.R., Filser F., Kocher P., Gauckler L.J. Fatigue of zirconia under cyclic loading in water and its implications for the design of dental bridges. Dental Materials 2007, 23:106-114.
39. Studart A.R., Filser F., Kocher P., Luthy H., Gauckler L.J. Cyclic fatigue in water of veneer-framework composites for all-ceramic dental bridges. Dental Materials 2007, 23:177-185.
40. Sundh A., Sjogren G. Fracture resistance of all-ceramic zirconia bridges with differing phase stabilizers and quality of sintering. Dental Materials 2006, 22:778-784.
41. Thompson J.Y., Stoner B.R., Piascik J.R., Smith R. Adhesion/cementation to zirconia and other non-silicate ceramics: where are we now?. Dental Materials 2011, 27:71-82.
42. 2 system by x-ray diffraction. Journal of the American Ceramic Society 1984, 67:C119-C121.
43. Tsukamoto R., Williams P.A., Clarke I.C., Pezzotti G., Shoji H., Akagi M., Yamamoto K. Y-TZP zirconia runs against highly crosslinked UHMWPE tibial inserts: Knee simulator wear and phase-transformation studies. Journal of Biomedical Materials Research Part B: Applied Biomaterials 2008, 86:145-153.
44. Vult von Steyern P., Ebbesson S., Holmgren J., Haag P., Nilner K. Fracture strength of two oxide ceramic crown systems after cyclic pre-loading and thermocycling. Journal of Oral Rehabilitation 2006, 33:682-689.
45. White S.N., Miklus V.G., McLaren E.A., Lang L.A., Caputo A.A. Flexural strength of a layered zirconia and porcelain dental all-ceramic system. Journal of Prosthetic Dentistry 2005, 94:125-131.
46. Wolfart S., Harder S., Eschbach S., Lehmann F., Kern M. Four-year clinical results of fixed dental prostheses with zirconia substructures (Cercon): end abutments vs. cantilever design. European Journal of Oral Sciences 2009, 117:741-749.
47. Yang B., Barloi A., Kern M. Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin. Dental Materials 2010, 26:44-50.
48. Yilmaz H., Aydin C., Gul B.E. Flexural strength and fracture toughness of dental core ceramics. Journal of Prosthetic Dentistry 2007, 98:120-128.
49. Zeng K., Oden A., Rowcliffe D. Flexure tests on dental ceramics. International Journal of Prosthodontics 1996, 9:434-439.
50. Zhang Y., Lawn B. Fatigue sensitivity of Y-TZP to microscale sharp-contact flaws. Journal of Biomedical Materials Research Part B: Applied Biomaterials 2005, 2B:388-392.
51. Zhang Y., Lawn B.R., Rekow D., Thompson V.P. Effect of sandblasting on the long-term performance of dental ceramics. Journal of Biomedical Materials Research Part B: Applied Biomaterials 2004, 71B:381-386.
52. Zhang Y., Lawn B.R., Malament K.A., Thompson V.P., Rekow D. Damage accumulation and fatigue life of particle-abraded ceramics. International Journal of Prosthodontics 2006, 19:442-448.
53. Zhou J., Mah J., Shrotriya P., Mercer C., Soboyejo W.O. Contact damage in an yttria stabilized zirconia: implications. Journal of Materials Science: Materials in Medicine 2007, 18:71-78.