Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin

Dental Materials

Volumn 26, Issue 1, 2010, Pages 44-50

  Yang, B ^a   Barloi, A ^a   Kern, M ^a  

^a UNIVERSITY OF KIEL   (Germany)

Author keywords

Air abrasion; Bonding; Self adhesive luting resin composite; Zirconia ceramic

Indexed keywords

ABRASION PRESSURES; BOND STRENGTH; COMPOSITE RESINS; CROSSHEAD SPEED; LOW PRESSURES; LUTING COMPOSITES; LUTING RESINS; MECHANICAL STRENGTH; PARTICLE ABRASION; PLEXIGLAS TUBE; REDUCED PRESSURE; RESIN-BOND; SELF-ADHESIVE; SURFACE CONDITIONING; SURFACE CONDITIONS; TENSILE BOND STRENGTH; THERMOCYCLING; UNIVERSAL TESTING MACHINES; ZIRCONIA CERAMIC;

ABRASION; BOND STRENGTH (MATERIALS); CERAMIC MATERIALS; DISKS (MACHINE COMPONENTS); DISKS (STRUCTURAL COMPONENTS); RESINS; TENSILE STRENGTH; TENSILE TESTING; TRIBOLOGY;

ZIRCONIA;

ALLOY PRIMER; ALUMINUM OXIDE; METAL PRIMER; METHACRYLIC ACID DERIVATIVE; METHACRYLOYLOXYDECYL DIHYDROGEN PHOSPHATE; RELY X UNICEM; RESIN; RESIN CEMENT; THIOKETONE; WATER; ZIRCONIUM; ZIRCONIUM OXIDE;

AIR; ARTICLE; CHEMISTRY; DENTAL BONDING; DENTAL CARE; DENTAL ETCHING; HUMAN; INSTRUMENTATION; MATERIALS TESTING; MECHANICAL STRESS; METHODOLOGY; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TEMPERATURE; TENSILE STRENGTH; TIME; TOOTH BRUSHING; TOOTH PROSTHESIS;

AIR; ALUMINUM OXIDE; COMPOSITE RESINS; DENTAL BONDING; DENTAL ETCHING; DENTAL POLISHING; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; HUMANS; MATERIALS TESTING; METHACRYLATES; MICROSCOPY, ELECTRON, SCANNING; RESIN CEMENTS; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; TENSILE STRENGTH; THIONES; TIME FACTORS; WATER; ZIRCONIUM;

EID: 71349083001     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2009.08.008     Document Type: Article

References (34)

1. Blatz M.B., Sadan A., and Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent 89 (2003) 268-274
2. Kern M. Resin bonding to oxide ceramics for dental restorations. J Adhes Sci Technol 23 (2009) 1097-1111
3. Blatz M.B., Chiche G., Holst S., and Sadan A. Influence of surface treatment and simulated aging on bond strengths of luting agents to zirconia. Quintessence Int 38 (2007) 745-753
4. Lüthy H., Loeffel O., and Hämmerle C.H. Effect of thermocycling on bond strength of luting cements to zirconia ceramic. Dent Mater 22 (2006) 195-200
5. Piwowarczyk A., Lauer H.C., and Sorensen J.A. The shear bond strength between luting cements and zirconia ceramics after two pre-treatments. Oper Dent 30 (2005) 382-388
6. Radovic I., Monticelli F., Goracci C., Vulicevic Z.R., and Ferrari M. Self-adhesive resin cements: a literature review. J Adhes Dent 10 (2008) 251-258
7. Kern M., and Wegner S.M. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 14 (1998) 64-71
8. Matinlinna J.P., Heikkinen T., Özcan M., Lassila L.V., and Vallittu P.K. Evaluation of resin adhesion to zirconia ceramic using some organosilanes. Dent Mater 22 (2006) 824-831
9. Özcan M., and Vallittu P.K. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater 19 (2003) 725-731
10. Heikkinen T.T., Lassila L.V., Matinlinna J.P., and Vallittu P.K. Effect of operating air pressure on tribochemical silica-coating. Acta Odontol Scand 65 (2007) 241-248
11. Al-Dohan H.M., Yaman P., Dennison J.B., Razzoog M.E., and Lang B.R. Shear strength of core-veneer interface in bi-layered ceramics. J Prosthet Dent 91 (2004) 349-355
12. Blatz M.B. Cementation of zirconium-oxide ceramic restorations. Pract Proced Aesthet Dent 16 (2004) 14
13. Oh W.S., and Shen C. Effect of surface topography on the bond strength of a composite to three different types of ceramic. J Prosthet Dent 90 (2003) 241-246
14. Valandro L.F., Della Bona A., Antonio Bottino M., and Neisser M.P. The effect of ceramic surface treatment on bonding to densely sintered alumina ceramic. J Prosthet Dent 93 (2005) 253-259
15. Blatz M.B. Adhesive cementation of high-strength ceramics. J Esthet Restor Dent 19 (2007) 238-239
16. Wegner S.M., and Kern M. Long-term resin bond strength to zirconia ceramic. J Adhes Dent 2 (2000) 139-147
17. Wolfart M., Lehmann F., Wolfart S., and Kern M. Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dent Mater 23 (2007) 45-50
18. Yang B., Lange-Jansen H.C., Scharnberg M., Wolfart S., Ludwig K., Adelung R., et al. Influence of saliva contamination on zirconia ceramic bonding. Dent Mater 24 (2008) 508-513
19. Yang B., Wolfart S., Scharnberg M., Ludwig K., Adelung R., and Kern M. Influence of contamination on zirconia ceramic bonding. J Dent Res 86 (2007) 749-753
20. Chang J.C., Hurst T.L., Hart D.A., and Estey A.W. 4-META use in dentistry: a literature review. J Prosthet Dent 87 (2002) 216-224
21. Burke F.J., Fleming G.J., Nathanson D., and Marquis P.M. Are adhesive technologies needed to support ceramics? An assessment of the current evidence. J Adhes Dent 4 (2002) 7-22
22. Quaas A.C., Yang B., and Kern M. Panavia F 2.0 bonding to contaminated zirconia ceramic after different cleaning procedures. Dent Mater 23 (2007) 506-512
23. Guazzato M., Albakry M., Quach L., and Swain M.V. Influence of surface and heat treatments on the flexural strength of a glass-infiltrated alumina/zirconia-reinforced dental ceramic. Dent Mater 21 (2005) 454-463
24. Uo M., Sjogren G., Sundh A., Goto M., Watari F., and Bergman M. Effect of surface condition of dental zirconia ceramic (Denzir) on bonding. Dent Mater J 25 (2006) 626-631
25. Zhang Y., Lawn B.R., Rekow E.D., and Thompson V.P. Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res B: Appl Biomater 71 (2004) 381-386
26. Kosmac T., Oblak C., Jevnikar P., Funduk N., and Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater 15 (1999) 426-433
27. Kern M., and Thompson V.P. Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability. J Prosthet Dent 73 (1995) 240-249
28. Bott B., and Hannig M. Effect of different luting materials on the marginal adaptation of Class I ceramic inlay restorations in vitro. Dent Mater 19 (2003) 264-269
29. Özcan M., Nijhuis H., and Valandro L.F. Effect of various surface conditioning methods on the adhesion of dual-cure resin cement with MDP functional monomer to zirconia after thermal aging. Dent Mater J 27 (2008) 99-104
30. Roulet J.F., Söderholm K.J., and Longmate J. Effects of treatment and storage conditions on ceramic/composite bond strength. J Dent Res 74 (1995) 381-387
31. Pisani-Proenca J., Erhardt M.C., Valandro L.F., Gutierrez-Aceves G., Bolanos-Carmona M.V., Del Castillo-Salmeron R., et al. Influence of ceramic surface conditioning and resin cements on microtensile bond strength to a glass ceramic. J Prosthet Dent 96 (2006) 412-417
32. Kern M. Bond strength of luting cements to zirconium oxide ceramics. Int J Prosthodont 13 (2000) 350
33. Atsu S.S., Kilicarslan M.A., Kucukesmen H.C., and Aka P.S. Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin. J Prosthet Dent 95 (2006) 430-436
34. Kern M., and Strub J.R. Bonding to alumina ceramic in restorative dentistry: clinical results over up to 5 years. J Dent 26 (1998) 245-249