Characterization and surface treatment effects on topography of a glass-infiltrated alumina/zirconia-reinforced ceramic

Dental Materials

Volumn 23, Issue 6, 2007, Pages 769-775

  Della Bona, Alvaro ^a   Donassollo, Tiago A ^b   Demarco, Flávio F ^b   Barrett, Allyson A ^c   Mecholsky Jr , John J ^c  

^a UNIVERSITY OF PASSO FUNDO   (Brazil)

^b FEDERAL UNIVERSITY OF PELOTAS   (Brazil)

^c UNIVERSITY OF FLORIDA   (United States)

Author keywords

Ceramic; Composition; Microstructure; Physical properties; Surface topography

Indexed keywords

ALUMINA; GLASS; POISSON RATIO; REINFORCEMENT; SCANNING ELECTRON MICROSCOPY; SILANES; SURFACE TREATMENT; TOPOGRAPHY; ULTRASONIC WAVES; ZIRCONIA;

ALUMINA ABRASIVE; BACKSCATTERED IMAGING (BSI); DISPERSIVE SPECTROSCOPY (EDS); OPTICAL PROFILOMETER;

CERAMIC MATERIALS;

ALUMINUM OXIDE; BIOMATERIAL; GLASS; HYDROFLUORIC ACID; LANTHANUM; LANTHANUM OXIDE; OXIDE; SILICON DIOXIDE; ZIRCONIUM; ZIRCONIUM OXIDE;

ARTICLE; CHEMISTRY; CRYSTALLIZATION; DENTAL CARE; DENTAL ETCHING; ELASTICITY; ELECTRON PROBE MICROANALYSIS; METHODOLOGY; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TOOTH BRUSHING; TOOTH PROSTHESIS;

ALUMINUM OXIDE; COATED MATERIALS, BIOCOMPATIBLE; CRYSTALLIZATION; DENTAL ETCHING; DENTAL POLISHING; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; ELASTICITY; ELECTRON PROBE MICROANALYSIS; GLASS; HYDROFLUORIC ACID; LANTHANUM; MICROSCOPY, ELECTRON, SCANNING; OXIDES; SILICON DIOXIDE; SURFACE PROPERTIES; ZIRCONIUM;

EID: 34247381199     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2006.06.043     Document Type: Article

References (41)

1. Tinschert J., Zwez D., Marx R., and Anusavice K.J. Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics. J Dent 28 (2000) 529-535
2. Chong K.H., Chai J., Takahashi Y., and Wozniak W. Flexural strength of In-Ceram alumina and In-Ceram zirconia core materials. Int J Prosthodont 15 (2002) 183-188
3. Guazzato M., Albakry M., Swain M.V., and Ironside J. Mechanical properties of In-Ceram Alumina and In-Ceram Zirconia. Int J Prosthodont 15 (2002) 339-346
4. Guazzato M., Albakry M., Quach L., and Swain M.V. Influence of surface and heat treatments on the flexural strength of a glass infiltrated alumina/zirconia-reinforced dental ceramic. Dent Mater 21 (2005) 454-463
5. Apholt W., Bindl A., Luthy H., and Mormann W.H. Flexural strength of Cerec 2 machined and jointed In Ceram-Alumina and In Ceram-Zirconia bars. Dent Mater 17 (2001) 260-267
6. Tinschert J., Natt G., Mautsch W., Augthun M., and Spiekermann H. Fracture resistance of lithium disilicate-, alumina-, and zirconia-based three-unit fixed partial dentures: a laboratory study. Int J Prosthodont 14 (2001) 231-238
7. Borges G.A., Sophr A.M., de Goes M.F., Sobrinho L.C., and Chan D.C. Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics. J Prosthet Dent 89 (2003) 479-488
8. Guazzato M., Proos K., Sara G., and Swain M.V. Strength, reliability, and mode of fracture of bilayered porcelain/core ceramics. Int J Prosthodont 17 (2004) 142-149
9. Guazzato M., Albakry M., Ringer S.P., and Swain M.V. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dent Mater 20 (2004) 449-456
10. Pallis K., Griggs J.A., Woody R.D., Guillen G.E., and Miller A.W. Fracture resistance of three all-ceramic restorative systems for posterior applications. J Prosthet Dent 91 (2004) 561-569
11. Della Bona A., and Anusavice K.J. Microstructure, composition, and etching topography of dental ceramics. Int J Prosthod 15 (2002) 159-167
12. Fischer H., Maier H.R., and Marx R. Improved reability of leucite reinforced glass by ion exchange. Dent Mater 16 (2000) 120-128
13. Callister Jr. W.D. Materials science and engineering: an introduction. 5th ed. (2000), John Wiley & Sons Inc., New York p. 871
14. Anusavice K.J. Phillips' science of dental materials. 11th ed. (2003), Saunders, St. Louis p. 805
15. Richerson D.W. Modern ceramic engineering. 2nd ed. (1992), Marcel Dekker Inc., New York p. 860
16. Dérand P., and Dérand T. Bond strength of luting cements to zirconium oxide ceramics. Int J Prosthodont 13 (2000) 131-135
17. Valandro L.F., Della Bona A., Bottino M.A., and Neisser M.P. The effect of ceramic surface treatment on bonding to densely sintered alumina ceramic. J Prosthet Dent 93 (2005) 253-259
18. Wegner S.M., and Kern M. Long-term resin bond strength to zirconia ceramic. J Adhes Dent 2 (2000) 139-147
19. Kern M., and Wegner S.M. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 14 (1998) 64-71
20. Blixt M., Adamczak E., Linden L.A., Oden A., and Arvidson K. Bonding to densely sintered alumina surfaces: effect of sandblasting and silica coating on shear bond strength of luting cements. Int J Prosthodont 13 (2000) 221-226
21. Rizkalla A.S., and Jones D.W. Mechanical properties of commercial high strength ceramic core materials. Dent Mater 20 (2004) 207-212
22. Wegner S.M., Gerdes W., and Kern M. Effect of different artificial aging conditions on ceramic-composite bond strength. Int J Prosthodont 15 (2002) 267-272
23. Jones D.W. The strength and strengthening mechanisms of dental ceramics. In: McLean J.W. (Ed). Dental ceramic: proceeding of the first international symposium on ceramics (1983) 83-141
24. Callister Jr. W.D. Materials science and engineering: an introduction. 5th ed. (2000), John Wiley & Sons Inc., New York p. 871
25. Della Bona A., Anusavice K.J., and Shen C. Microtensile strength of composite bonded to hot-pressed ceramics. J Adhes Dent 2 (2000) 305-313
26. Awliya W., Oden A., Yaman P., Dennison J.B., and Razzoog M.E. Shear bond strength of resin cement to densely sintered high-purity alumina with various surface conditions. Acta Odontol Scand 56 (1998) 9-13
27. Bottino M.A., Valandro L.F., Scotti R., and Buso L. Effect of surface treatments on the resin bond to zirconium-based ceramic. Int J Prosthodont 18 (2005) 60-65
28. Kern M., and Thompson V.P. Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability. J Prosthet Dent 73 (1995) 240-249
29. Özcan M., Alkumru H.N., and Gemalmaz D. The effect of surface treatment on the shear bond strength of luting cement to a glass-infiltrated alumina ceramic. Int J Prosthodont 14 (2001) 335-339
30. Kern M., and Thompson V.P. Sandblasting and silica coating of a glass-infiltrated alumina ceramic: volume loss, morphology, and changes in the surface composition. J Prosthet Dent 71 (1994) 453-461
31. Isidor F., Stokholm R., and Ravnholt G. Tensile bond strength of resin luting cement to glass infiltrated porous aluminium oxide cores (In-Ceram). Eur J Prosthodont Res Dent 3 (1995) 199-202
32. Sun R., Suansuwan N., Kilpatrick N., and Swain M. Characterization of tribochemically assisted bonding of composite resin to porcelain and metal. J Dent 28 (2000) 441-445
33. Frankenberger R., Krämer N., and Sindel J. Repair strength of etched vs silica-coated metal-ceramic and all-ceramic restorations. Oper Dent 25 (2000) 209-215
34. Jedynakiewicz N.M., and Martin N. The effect of surface coating on the bond strength of machinable ceramics. Biomaterials 22 (2001) 749-752
35. Chen J.H., Matsumura H., and Atsuta M. Effect of etchant, etching period, and silane priming on bond strength to porcelain of composite resin. Oper Dent 23 (1998) 250-257
36. Della Bona A., Anusavice K.J., and Hood J.A.A. Effect of ceramic surface treatment on tensile bond strength to resin cement. Int J Prosthod 15 (2002) 248-253
37. Della Bona A., Anusavice K.J., and Mecholsky Jr. J.J. Failure analysis of resin composite bonded to ceramic. Dent Mater 19 (2003) 693-699
38. Della Bona A., and Van Noort R. Shear vs. tensile bond strength of resin composite bonded to ceramic. J Dent Res 74 (1995) 1591-1596
39. Della Bona A., Shen C., and Anusavice K.J. Work of adhesion of resin on treated lithia disilicate-based ceramic. Dent Mater 20 (2004) 338-344
40. Della Bona A., and van Noort R. Ceramic surface preparations for resin bonding. Am J Dent 11 (1998) 276-280
41. Thurmond J.W., Barkmeier W.W., and Wilwerding T.M. Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain. J Prosthet Dent 72 (1994) 355-359