Dissolved and colloidal substances (dcs) and the charge demand of papermaking process waters and suspensions: A review

BioResources

Volumn 7, Issue 4, 2012, Pages 6109-6193

  Hubbe, Martin A ^a   Sundberg, Anna ^b   Mocchiutti, Paulina ^c   Ni, Yonghao ^d   Pelton, Robert ^e  

^a NORTH CAROLINA STATE UNIVERSITY   (United States)

^b ÅBO AKADEMI UNIVERSITY   (Finland)

^c UNIVERSIDAD NACIONAL DEL LITORAL   (Argentina)

^d UNIVERSITY OF NEW BRUNSWICK   (Canada)

^e MCMASTER UNIVERSITY   (Canada)

Author keywords

Cationic demand; Charge demand; Dissolved and colloidal substances (DCS); Drainage; Fines; Interferences to polymeric retention aids; Polyelectrolyte complexes; Retention

Indexed keywords

DISSOLUTION; DRAINAGE; PAPER; PAPER PRODUCTS; PAPERMAKING; PAPERMAKING MACHINERY; POLYELECTROLYTES;

CATIONIC DEMAND; CHARGE DEMAND; DISSOLVED AND COLLOIDAL SUBSTANCES; FINES; POLYELECTROLYTE COMPLEXES; RETENTION; RETENTION AID;

SUSPENSIONS (FLUIDS);

DISSOLVING; DRAINAGE; PAPER MAKING; PAPER PRODUCTS; POLYELECTROLYTES; RETENTION;

EID: 84872856231     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.7.4.6109-6193     Document Type: Review

References (478)

1. th Ed., Wiley-Interscience.
2. Aimi, H., Tahara, K., Kurimoto, Y., and Yamauchi, S. (2010). "Formation of a complex with aluminum by ozone-treated kraft lignins and their low molecular weight fragments," J. Wood Sci. 56(2), 133-139.
3. Ajersch, M., and Pelton, R. (1999). "Modelling fibre loss by entrainment during flotation of flocculated pulps," J. Pulp Paper Sci. 25(1), 30-36.
4. 27Al nuclear magnetic resonance studies of the hydrolysis and polymerization of the hexa-aquo-aluminum(III) cation," J.C.S. Dalton (5), 604-610.
5. Alber, W., Erhard, K., and Frohberg, K. (1998). "Influence of different cooking and bleaching conditions on the residual lignin in chemical pulps and characterization of their impact on papermaking and paper properties," Wochenbl. Papierfabr. 126(19), 950-957.
6. Alén, R., and Hartus, T. (1988). "UV spectrophotometric determination of lignin from alkaline pulping liquors," Cellulose Chem. Technol. 22(6), 613-618.
7. Alén, R., and Vikkula, A. (1989). "Formation of lignin monomers during kraft pulping of birch wood," Cellulose Chem. Technol. 23(5), 579-583.
8. Allen, L. H. (1979). "Characterization of colloidal wood resin in newsprint pulps," Colloid Polym. Sci. 257(5), 533-538.
9. Allen, L. H. (1980). "Mechanisms and control of pitch deposition in newsprint mills," Tappi 63(2), 81-87.
10. Alince, B. (1987). "Effect of contaminants on filler retention in mechanical pulp," Paperi Puu 69(3), 230-233.
11. Alince, B. (2002). "Porosity of swollen pulp fibers revisited," Nordic Pulp Paper Res. J. 17(1), 71-73.
12. th Fund. Res. Symp., Cambridge, Sept. 1997, Vol. 2., Baker, C. F. (ed.), 771-788.
13. Andersson, K., and Lindgren, E. (1996). "Important properties of colloidal silica in microparticulate systems," Nordic Pulp Paper Res. J. 11(1), 15-21, 57.
14. Annenkov, V. V., Kruglova, V. A., and Mazyar, N. L. (1998). "Application of the neighbor effect theory to the potentiometric titration of polyelectrolytes," Vysokomolekulyarnye Soedineniya Seriya A&Seriya B 40(3), 466-471.
15. Argüelles-Monal, W., Gárciga, M., and Peniche-Covas, C. (1990). "Study of the stoichiometric polyelectrolyte complex between chitosan and carboxymethyl cellulose," Polymer Bull. 23, 307-313.
16. Arnson, T. R. (1982). "The chemistry of aluminum salts in papermaking," TAPPI J. 65(3), 125-130.
17. Arnson, T. R., and Stratton, R. A. (1983). "The adsorption of complex aluminum species by cellulosic fibers," TAPPI J. 66(12), 72-75.
18. Asselman, T., and Garnier, G. (2000). "The role of anioinic microparticles in a poly(acrylamide)-montomorillonite flocculation aid system," Colloids Surf. A: Physicochem. Eng. Aspects 170, 79-90.
19. Auhorn, W. J., and Melzer, J. (1979). "Improved efficiency of wet end additives in closed wet end systems through elimination of detrimental substances," TAPPI Papermakers Conf., 49-66.
20. Back, E. L., and Allen, L. H. (eds.) (2000). Pitch Control, Wood Resin and Deresination, TAPPI Press, Atlanta, Georgia.
21. Bai, L. K., Hu, H. R., and Xu, J. F. (2012). "Influences of configuration and molecular weight of hemicelluloses on their paper-strengthening effects," Carbohydrate Polymers 88(4), 1258-1263.
22. Balakshin, M. Y., Capanema, E. A., Chen, C. L., and Gracz, H. S. (2003). "Elucidation of the structures of residual and dissolved pine kraft lignins using an HMQC NMR technique," J. Agric. Food Chem. 51(21), 6116-6127.
23. Babineau, K., Ni, Y., and Sain, M. M. (2003). "Effect of acid treatment on removal of anionic trashes from bleached mechanical pulps and the characteristics," Pulp Pap. Can. 104(7), 31-34.
24. Barron, W., Murray, B. S., Scales, P. J. Healy, T. W., Dixon, D. R., and Pascoe, M. (1994). "The streaming current detector: A comparison with conventional electrokinetic techniques," Colloids Surf. A: Physicochem. Eng. Aspects 88(2-3), 129-139.
25. Beaudoin, R., Gratton, R., and Turcotte, R., (1995). "Performance of wet-end cationic starches in maintaining good sizing at high conductivity levels in alkaline fine paper," J. Pulp Paper Science 21(7), J238-J243 (1995).
26. Belosinschi, D., and Bobu, E. (2008). "Effects of coagulants on the DCS accumulation in process water of papermaking," Environ. Eng. Manag. J. 7(3), 269-276.
27. Ben, Y., Dorris, G., Hill, G., and Allen, J. (2003). "Contaminant removal from deinking process water, Part I: Mill benchmarking," Pulp Pap. Can. 104(1), 42-44.
28. Berthold, J., and Salmén, L. (1997). "Effects of mechanical and chemical treatments on the pore-size distribution in wood pulps examined by inverse size-exclusion chromatography," J. Pulp Paper Sci. 23(6), J245-J253.
29. Bhardwaj, N. K., Duong, T. D., and Nguyen, K. L. (2006). "Effects of Kappa number on fibre charge of radiata pine kraft pulps," APPITA J. 59(4), 321-325.
30. Bhardwaj, N. K., Hoang, V., Dang, V., and Nguyen, K. L. (2006). "Dissolution of ionisable groups and lignocellulosic components during low-temperature kraft pulping of Pinus radiata," Colloids Surf. A-Physicochem Eng. Aspects 290(1-3), 222-228.
31. Bhardwaj, N. K., Hoang, V., and Nguyen, K. L. (2007a). "Effect of refining on pulp surface charge accessible to polydadmac and FTIR characteristic bands of high yield kraft fibres," Bioresour. Technol. 98(4), 962-966.
32. Bhardwaj, N. K., Hoang, V., and Nguyen, K. L. (2007b). "A comparative study of the effect of refining on physical and electrokinetic properties of various cellulosic fibres," Bioresour. Technol. 98(8), 1647-1654.
33. Bhardwaj, N. K., Kumar, S., and Bajpai, P. K. (2004). "Effects of processing on zeta potential and cationic demand of kraft pulps," Colloids Surf. A-Physicochem. Eng. Aspects 246(1-3), 121-125.
34. Bhardwaj, N. K., Kumar, S., and Bajpai, P. K. (2005). "Effect of zeta potential on retention and drainage of secondary fibers," Colloids Surf. A. 260(1-3), 245-250.
35. Bhardwaj, N. K., and Nguyen, K. L. (2005). "Charge aspects of hydrogen peroxide bleached de-inked pulps," Colloids Surf. A.-Physicochem. Eng. Aspects 262(1-3), 232-237.
36. Bi, S., Wang, C., Cao, Q., and Zhang, C. (2004). "Studies on the mechanism of hydrolysis and polymerization of aluminum salts in aqueous solution: Correlations between the 'Core-links' model and 'Cage-like' Keggin-Al13 model," Coordination Chem. Revs. 248, 441-455.
37. Bikova, T., Klevinska, V., and Treimanis, A. (2000). "Monitoring of lignin and hemicelluloses in spent cooking liquor during kraft delignification," Holzforschung 54(1), 66-70.
38. Blanco, A., Negro, C., Diaz, L., Saarimaa, V., Sundberg, A., and Holmbom, B. (2009). "Influence of thermostable lipase treatment of thermomechanical pulp (TMP) on extractives and paper properties," Appita J. 62(1), 113-117.
39. Blazey, M. A., Grimsley, S. A., and Chen, G. C. (2002). "Indicators for forecasting 'pitch season'," Tappi J. 1(10), 28-30.
40. Bley, L. (1992). "Measuring the concentration of anionic trash-The PCD," Paper Technol. 33(4), 32-37.
41. Bley, L. (1998). "Latest experiences of on-line charge measurement: A process control concept-Optimized runnability is strongly related to the forces in the wet end of a paper machine," Pulp Paper Can. 99(5), T165-T169.
42. Bley, L., and Winter, E. (1997). "On-line charge monitoring-A wet-end strategy," Proc. TAPPI 1997 Engineering&Papermaking Conf., TAPPI Press, Atlanta, 297-301.
43. Bobu, E., Ciolacu, F., and Parpalea, R. (2002). "Effective use of FWAs in papermaking by controlling their interactions with other chemicals," Wochenbl. Papierfabr. 130(22), 1510-1523.
44. Bobu, E., Popa, V. I., and Moraru, T. (1999). "Control of colloidal dissolved materials in papermaking systems with high content of secondary fibers," Wochenbl. Papierfabr. 127(20), 1334-1341.
45. Böckenhoff, K., and Fischer, W. R. (2001). "Determination of electrokinetic charge with a particle-charge detector, and its relationship to the total charge," Fresenius J. Anal. Chem. 371(5), 670-674.
46. Boese, B. J., and Breaker R. R. (2007). "In vitro selection and characterization of cellulose-bonding DNA aptamers," Nucl. Acids Res. 35(19), 6378-6388.
47. Borukhov, I., Andelman, D., Borrega, R., Cloitre, M., Leibler, L., and Orland, H. (2000). "Polyelectrolyte titration: Theory and experiment," J. Phys. Chem. B 104(47), 11027-11034.
48. Bottero, J. Y., Cases, J. M., Fiessinger, F., and Poirier, J. E. (1980). "Studies of hydrolyzed aluminum chloride solutions. 1. Nature of aluminum species and composition of aqueous solution," J. Phys. Chem. 84(22), 2933-2939.
49. Bottero, J.-Y., and Fiessinger, F. (1989). "Aluminum chemistry in aqueous solution," Nordic Pulp Paper Res. J. 4(2), 81-89.
50. Bottéro, J. Y., Poirier, J. E., and Fiessinger, F. (1980). "Study of partially neutralized aqueous aluminum chloride solutions: Identification of aluminum species and relation between the composition of the solutions and their efficiency as a coagulant," Progress in Water Technology 13, 601-612.
51. Bourgogne, G., Oy, J. P., and Laine, J. E. (2001). "A review of the effects of reduced water consumption on the wet end of the paper machine and the quality of paper," Paperi Puu 83(3), 190-203.
52. nd Ed., Roberts, J. C. (ed.), Blackie Academic&Professional, London, Ch. 11, pp. 194-230.
53. Bráuer, P., Kappel, J., and Holler, M. (2001). "Anionic trash in mechanical pulping systems," Pulp Pap. Can. 102(4), 44-48.
54. Brouwer, P. H. (1991). "The relationship between zeta potential and ionic demand and how it affects wet-end retention," Tappi J. 74(1), 170-179.
55. Buchhammer, H. M., Mende, M., and Oelmann, M. (2003). "Formation of mono-sized polyelectrolyte complex dispersions: Effects of polymer structure, concentration and mixing conditions," Colloids Surf A-Physicochem Eng. Aspects 218(103), 151-159.
56. Buontempo, J. T., Sherman, L. M., and St. John, M. R. (1996). "The effects of salts on the performance of cationic flocculants used as retention aids for alkaline fine paper," TAPPI 1996 Papermakers Conf., 49-57.
57. Cadena, E. M., Garcia, J., Vidal, T., and Torres, A. L. (2009). "Determination of zeta potential and cationic demand in ECF and TCF bleached pulp from eucalyptus and flax. Influence of measuring conditions," Cellulose 16(3), 491-500.
58. Cardwell, P. H. (1966). "Adsorption studies using a streaming current detector," J. Colloid Interface Sci. 22(5), 430-437.
59. Carman, P. C. (1937). "Fluid flow through granular beds," Trans. I. Chem. E. 15, 150-166.
60. Carrasco, F., Mutjé, P., and Pèlach, M. A. (1996). "Refining of bleached cellulosic pulps: Characterization by application of the colloidal titration technique," Wood Sci. Technol. 30, 227-236.
61. Carrasco, F., Mutje, P., and Pelach, M. A. (1998). "Control of retention in paper-making by colloid titration and zeta potential techniques," Wood Sci. Technol. 32(2), 145-155.
62. Cesek, B., and Milichovsky, M. (1996). "Releasing of soluble and colloidal substances in pulp surries," Cellulose Chem. Technol. 30(3-4), 297-306.
63. Chang, M. Y., and Robertson, A. A. (1967). "Flocculation studies of fiber suspensions: Influence of zeta potential," Pulp Paper Mag. Can. 68(9), T438-T444.
64. Chen, H., Park, A., Heitmann, J. A., and Hubbe, M. A. (2009). "Importance of cellulosic fines relative to the dewatering rates of fiber suspensions," Ind. Eng. Chem. Res. 48(20), 9106-9112.
65. Chen, J., Hubbe, M. A., and Heitmann, J. A. (2001). "Measurement of colloidal charge in the paper mill by streaming current," Proc. TAPPI Papermakers Conf.
66. Chen, J., Heitmann, J. A., and Hubbe, M. A. (2003). "Dependency of polyelectrolyte complex stoichiometry on the order of addition. 1. Effect of salt concentration during streaming current titrations with strong poly-acid and poly-base," Colloids Surf. A 223(1-3), 215-230.
67. Chen, J., Hubbe, M. A., Heitmann, J. A., Argyropoulos, D. S., and Rojas, O. J. (2004). "Dependency of polyelectrolyte complex stoichiometry on the order of addition. 2. Aluminum chloride and poly-vinylsulfate," Colloids Surf. A 246(1-3), 71-79.
68. Chen, Q., Ni, Y., and He, Z. (2012a). "Substitution of high-yield pulp for hardwood bleached kraft pulp in paper production and its effect on alkenyl succinic anhydride sizing," BioResources 7(2), 1462-1473.
69. Chen, Q., Ni, Y., and He, Z. (2012b). "Using cationic polymers to improve alkenyl succinic anhydride (AKD) sizing efficiency in high-yield pulp containing furnish," BioResources 7(3), 3948-3959.
70. TH ISETPP), Sun, R. C., and Fu, S. Y. (eds.), SCUT, Guangzhou, China, 945-948.
71. Chung, D. K., Cantrell, J., and Lefevre, G. (1993). "Control of detrimental substances. Low molecular weight cationic polymers can help," Pulp Pap. Can. 94(12), T403-T408.
72. Claesson, P. M., Poptoshev, E., Blomberg, E., and Dedinaite, A. (2005). "Polyelectrolyte-mediated surface interactions," Advan. Colloid Interface Sci. 114, 173-187.
73. Clas, S.-D., Koller, E., and Allen, L. H. (1993). "Characterization of the effect of hemicellulose on the deposition of calcium soaps of tall oil using factorial design analysis," J. Pulp Paper Sci. 19(5), J177-J180.
74. Cohen Stuart, M. A., Scheutjens, J. M. H. M., and Fleer, G. J. (1980) "Polydispersity effects and the interpretation of polymer adsorption isotherms," J. Polymer Sci. 18, 559-573.
75. Cole, C. A., Hubbe, M. A., and Heitmann, J. A. (2008). "Water release from fractionated stock suspensions. 1. Effects of the amounts and types of fiber fines," TAPPI J. 7(7), 28-32.
76. Crawford, R. A., and Flood, T. A. (1989). "Preliminary NMR study on structure of polyaluminum chloride," TAPPI Papermakers Conf., TAPPI Press, 55-59.
77. Cui, Y. G., Pelton, R., and Ketelson, H. (2008). "Shapes of polyelectrolyte titration curves. 2. The deviant behavior of labile polyelectrolytes," Macromol. 41(21), 8198-8203.
78. Cundall, R. B., Lawton, J. F., Murray, D., and Phillips, G. O. (1979). "Polyelectrolyte complexes. 1. The effect of pH and ionic strength on the stoichiometry of model polycation-polyanion complexes," Makromol. Chem. 180, 2913-2922.
79. Dautzenberg, H., Hartmann, J., Grunewald, S., and Brand, F. (1996). "Stoichiometry and structure of polyelectrolyte complex particles in diluted solutions," Berichte der Bunsen-Gesellschaft-Phys. Chem. Chem. Phys. 100(6), 1024-1032.
80. Dautzenberg, H., and Karibyants, N. (1999). "Polyelectrolyte complex formation in highly aggregating system. Effect of salt: Response to subsequent addition of NaCl," Macromol. Chem. Phys. 200(1), 118-125.
81. Dickinson, E., and Eriksson, L. (1991). "Particle flocculation by adsorbing polymers," Adv. Colloid Interface Sci. 34, 1-29.
82. Donat, V., van de Ven, T. G. M., and Paris, J. (2003). "Distribution of dissolved and colloidal substances in the forming and press sections of a paper machine," J. Pulp Paper Sci. 29(9), 294-298.
83. Dragan, S., and Cristea, M. (2001). "Influence of low-molecular-weight salts on the formation of polyelectrolyte complexes based on polycations with quaternary ammonium salt groups in the main chain and poly(sodium acrylate)," Eur. Polymer J. 37, 1571-1575.
84. Dragan, S., and Cristea, M. (2002). "Polyelectrolyte complexes IV. Interpolyelectrolyte complexes between some polycations with N,N-dimethyl-2-hydroxypropylene-ammonium chloride units and poly(sodium styrenesulfonate) in dilute aqueous solution," Polymer 43(1), 55-62.
85. Duarte, R. M. B. O., Santos, E. B. H., and Duarte, A. C. (2003). "Spectroscopic characteristics of ultrafiltration fractions of fulvic and humic acids isolated from an eucalyptus bleached kraft pulp mill effluent," Water Res. 37(17), 4073-4080.
86. Dubin, P. L., and Davis, D. (1985). "Stoichiometry and coacervation of complexes formed between polyelectrolytes and mixed micelles," Colloids Surf. 13, 113-124.
87. Dunham, A. J., Sherman, L. M., and Alfano, J. C. (2002). "Effect of dissolved and colloidal substances on drainage properties of mechanical pulp suspensions," J. Pulp Paper Sci. 28(9), 298-304.
88. Dunlop-Jones, N., and Allen, L. H. (1989). "The influences of washing, defoamers and dispersants on pitch deposition from unbleached kraft pulps," J. Pulp Paper Sci. 15(6), J235-J241.
89. Eisenschmid, K., and Stetter, A. (1998). "Practical experiences in solving problems caused by disturbing substances," Wochenbl. Papierfabr. 126(17), 796-802.
90. Eklund, D., and Lindström, T. (1991). Paper Chemistry. An introduction, DT Paper Science Publications, Grankulla, Finland.
91. Ekman, R., Eckerman, C., and Holmbom, B. (1990). "Studies on the behaviour of extractives in mechanical pulp suspensions," Nordic Pulp Paper Res. J. 5, 96-102.
92. Exall, K. N., and van Loon, G. W. (2003). "Effects of raw water conditions on solution-sate aluminum speciation during coagulant dilution," Water Res. 37(14), 3341-3350.
93. Fang, H., and Ming, S. (2006). "Synthesis and application of P-DADMAC - Standard cationic polyelectrolyte in colloid titration," Research Progress in Pulping and Papermaking, He, B. et al. (eds.), 3rd International Symposium on Emerging Technologies of Pulping and Papermaking, SCUT, Guangzhou, 599-602.
94. Fardim, P., and Holmbom, B. (2005). "Origin and surface distribution of anionic groups in different papermaking fibers," Colloids Surf A.: Physicochem. Eng. Aspects 252(2-3), 237-242.
95. Fardim, P., Holmbom, B., Ivaska, A., Karhu, J., Mortha, G., and Laine, J. (2002). "Critical comparison and validation of methods for determination of anionic groups in pulp fibres," Nordic Pulp Paper Res. J. 17(3), 346-351.
96. Fardim, P., Moreno, T., and Holmbom, B. (2005). "Anionic groups on cellulosic fiber surfaces investigated by XPS, FTIR-ATR, and different sorption methods," J. Colloid Interface Sci. 290, 383-391.
97. Farley, C. E. (1997). "Factors influencing the rate of charge decay," Tappi J. 80(10), 177-183.
98. Fatehi, P., Qian, L. Y., Kititerakun, R., Rirksomboon, T., and Xiao, H. N. (2009). "Complex formation of modified chitosan and carboxymethyl cellulose and its effect on paper properties," TAPPI J. 8(6), 29-35.
99. Fatehi, P., Xiao, H. N., and van de Ven, T. G. M. (2011). "Quantitative analysis of cationic poly(vinyl alcohol) diffusion into the hairy structure of cellulose fiber pores: Charge density effect," Langmuir 27(22), 13489-13496 .
100. Feng, X., Leduc, M., and Pelton, R. (2008). "Polyelectrolyte complex characterization with isothermal titration calorimetry and colloid titration," Colloids Surf. A-Physicochem. Eng. Aspects 317(1-3), 535-542.
101. Feng, X., Pelton, R., Leduc, M., and Champ, S. (2007a). "Colloidal complexes from poly(vinyl amine) and carboxymethyl cellulose mixtures," Langmuir 23(6), 2970-2976.
102. Feng, X., Pouw, K., Leung, V., and Pelton, R. (2007b). "Adhesion of colloidal polyelectrolyte complexes to wet cellulose," Biomacromol. 8(7), 2161-2166.
103. Feng, Z. A., Alén, R., and Niemela, K. (2002). "Formation of aliphatic carboxylic acids during soda-AQ pulping of kenaf bark," Holzforschung 56(4), 388-394.
104. Feng, Z. N., Alén, R., and Louhelainen, J. (2001). "Characterisation of black liquors from soda-AQ pulping of wheat straw," APPITA J. 54(2), 234-238.
105. Fleer, G. J., Cohen-Stuart, M. A., Scheutjens, J. M. H. M., Cosgrove, T., and Vincent, B. (eds.), (1993). Polymers at Interfaces, Chapman and Hall, London.
106. Fras, L., Johansson, L.-S., Stenius, P., Laine, L., Stana-Kleinschek, K., and Ribitsch, V. (2005). "Analysis of the oxidation of cellulose fibres by titration and XPS," Colloids Surf. A-Physicochem Eng. Aspects 260(1-3), 101-108.
107. Freire, C. S. R., Pinto, P. C. R., Santiago, A. S., Silvestre, A. J. D., Evtuguin, D. V., and Neto, C. P. (2006). "Comparative study of lipophilic extractives of hardwoods and corresponding ECF bleached kraft pulps," BioResources 1(1), 3-17.
108. th Natl. ISA Anal. Instrum. Symp., Houston, TX, May 11-13, 1966, pp. 181-198.
109. Gernandt, R., Wågberg, L., Gardlund, L., and Dautzenberg, H. (2003). "Polyelectrolyte complexes for surface modification of wood fibres-I. Preparation and characterisation of complexes for dry and wet strength improvement of paper," Colloids Surf. A.-Physicochem. Eng. Aspects 213(1), 15-25.
110. Gess, J. M. (1991). "The fines sensitivity of papermaking furnishes," TAPPI 1991 Advanced Topics Wet-End Chem. Short Course Notes, TAPPI Press, Atlanta, 70-74.
111. Gill, R. I. S. (1996). "Chemical control of deposits-Scopes and limitations," Paper Technol. 37(6), 23-31.
112. Gliese, T. (2000). "Online-Ladungsmessung als Instrument zur White-Pitch-Kontrolle," Wochenbl. Papierfabr. 128(4), 202-205.
113. Glittenberg, D., Hemmes, J.-L., and Wahl, J. P. (1994). "Synergismen zwischen synthetischen Hilfsmitteln und kationischer Stärke in holzhaltigen Systemen," Wochenbl. Papierfabr. 122(14), 553-560.
114. Goddard, E. D. (1986). "Polymer-surfactant interaction. Part II. Polymer and surfactant of opposite charge," Colloids Surf. 19, 301-329.
115. Goossens, J. W. S., and Luner, P. (1976). "Flocculation of microcrystalline cellulose suspensions with cationic polymers-Effect of agitation," TAPPI 59(2), 89-94.
116. Gratton, R., and Pruszynski, P. (1995). "Cationic demand survey of paper machines-How we measure and use it," Pulp Paper Can. 96(3), 73-78.
117. Gregory, J. (1973). "Rates of flocculation of latex particles by cationic polymers," J. Colloid Interface Sci. 42(2), 448-456.
118. Gruber, E., and Ott, T. (1995). "Determination of ionic groups in cationic pulps-Colorimetric analysis and polyelectrolyte titration," Papier 49(6), 289-290, 292-294, 296.
119. Gruber, S., Berger, R., and Reichert, A. (2003). "Process optimisation and automatic chemical additive control through online charge determination and online consistency measurements," Wochenbl. Papierfabr. 131(11-12), 700-711.
120. Guyard, A., Daneault, C., and Chabot, B. (2006). "Use of modified silica nanoparticle for fixation and elimination of colloidal and dissolved substances from white water," Nordic Pulp Paper Res. J. 21(5), 620-628.
121. Hafren, J., and Daniel, G. (2005). "Chemoenzymatic modifications of charge in chemithermomechanical wood pulp," Nordic Pulp Paper Res. J. 20(2), 200-204.
122. Halabisky, D. D. (1977). "Wet-end control for the effective use of cationic starch," Tappi 60(12), 125-127.
123. Hannuksela, T., Fardim, P., and Holmbom, B. (2003). "Sorption of O-acetyl galactoglucomannans onto different pulp fibers," Cellulose 10(4), 317-324.
124. Hannuksela, T., and Holmbom, B. (2004). "Stabilization of wood resin emulsions by dissolved galactoglucomannans and galactomannans," J. Pulp Paper Sci. 30(6), 159-164.
125. Hannuksela, T., Holmbom, B., Mortha, G., and Lachenal, D. (2004). "Effect of sorbed galactoglucomannans and galactomannans on pulp and paper handsheet properties, especially strength properties," Nordic Pulp Pap. Res. J. 19(2), 237-244.
126. Hannuksela, T., Tenkanen, M., and Holmbom, B. (2002). "Sorption of dissolved galactoglucomannans and galactomannans to bleached kraft pulp," Cellulose 9(2-3), 251-261.
127. Haronska, P., Kötz, J., and Philipp, B. (1989). "Zur Interpretation einer vom Verhältnis 1:1: abseichenden Symblex-Stöchiometrie," Acta Polymerica 40(2), 110-112.
128. Hart, P. W. (2011). "The chemical versus energy cost tug of water: A pulp mill perspective," TAPPI J. 10(7), 37-42.
129. Hassler, T. (1988). "Pitch deposition in papermaking and the function of pitch-control agents," Tappi J. 71(6), 195-201.
130. Hattori, T., Hattori, S., and Kato, M. (1994). "The stoichiometric accuracy and formation constants of colloidal titration-Polyelectrolytes aggregate reaction of glycolchitosan-poly(vinyl sulfate) and glycolchitosan-docecylbenzene sulfonate," Bunseki Kagaku 43(10), 777-784.
131. Hayden, P. L., and Rubin, A. J. (1974). "Systematic investigation of the hydrolysis and precipitation of aluminum(III)," In: Aqueous-Environmental Chemistry of Metals, Rubin, A. J. (ed.), Ann Arbor Sci., Ann Arbor, Michigan, Ch. 9, 317-381.
132. He, Z. B., Ni, Y. H., and Zhang, E. (2004). "Further understanding on the cationic demand of dissolved substances during peroxide bleaching of a spruce TMP," J. Wood Chem. Technol. 24(2), 153-168.
133. Heermann, M. L., Welter, S. R., and Hubbe, M. A. (2006). "Effects of high treatment levels in a dry-strength additive program based on deposition of polyelectrolyte complexes: How much glue is too much?" Tappi J. 5(6), 9-14.
134. Helmerius, J., von Walter, J. V., Rova, U., Berglund, K. A., and Hodge, D. B. (2010). "Impact of hemicellulose pre-extraction for bioconversion on birch kraft pulp properties," Bioresour. Technol. 101(15), 5996-6005.
135. Herrington, T. M., and Petzold, J. C. (1992). "An investigation into the nature of charge on the surface of papermaking woodpulps. 2. Analysis of potentiometric titration data," Colloids Surf. 64(2), 109-118.
136. Hesselink, F. T. (1977). "On the theory of polyelectrolyte adsorption. The effect on adsorption behavior of the electrostatic contribution to the adsorption free energy," J. Colloid Interface Sci. 60(3), 448-466.
137. rd Ed., Marcel Dekker, New York.
138. Hoekstra, P. M. (1991). "Fundamentals of slime control," TAPPI 1991 Chemical Processing Aids, TAPPI Press, Atlanta.
139. Holmbom, B. (1997). "Analysis of dissolved and colloidal substances generated in deinking," Gatwik, UK: Wet End Chemistry Conference&Cost Workshop, pp. 121-125.
140. th ISWPC, Korea TAPPI, Seoul, South Korea, 120-124 (ISBN 89.950520-0-7 93580).
141. Holmbom, B., and Sundberg, A. (2003). "Dissolved and colloidal substances accumulating in papermaking process waters," Wochenbl. Papierfabr. 131(21), 1305-1311.
142. Horn, D. (1978). "Optisches Zweistrahlverfahren zur Bestimmung von Polyelectrolyten in Wasser und zur Messung de Polymeradsorption an Grenzflächen," Progr. Colloid Polymer Sci. 65, 251-264.
143. Horn, D. (1980). "Polyethylenimine-Physicochemical properties and applications," In: Polymeric Amines and Ammonium Salts, Goethals, E. J. (ed.), Pergamon Press, Oxford, 333-355.
144. Horn, D., and Linhart, F. (1996). "Retention aids," in: Paper Chemistry, Roberts, J. C. (ed.), Second Ed., Blackie Academic and Professional, Chapman and Hall, Glasgow, 64-82.
145. Horn, D., and Melzer, J. (1975). "The effect of high molecular cationic dewatering aids on the electrokinetic properties of pulp," Papier 29(12), 534-541.
146. Horvath, A. T., Horvath, A. E., Lindström, T., and Wågberg, L. (2008). "Diffusion of cationic polyelectrolytes into cellulosic fibers," Langmuir 24(19), 10797-10806.
147. Horvath, A. E., Lindström, T., and Laine, J. (2006). "On the indirect polyelectrolyte titration of cellulosic fibers. Conditions for charge stoichiometry and comparison with ESCA," Langmuir 22, 824-830.
148. Horvath, A. T., Horvath, A. E., Lindström, T., and Wågberg, L. (2008). "Adsorption of highly charged polyelectrolytes onto an oppositely charged porous substrate," Langmuir 24(15), 7857-7866.
149. Horvath, A. E., and Lindström, T. (2007). "Indirect polyelectrolyte titration of cellulosic fibers-Surface and bulk charges of cellulosic fibers," Nordic Pulp Paper Res. J. 22(1), 87-92.
150. Horvath, A. E., Lindström, T., and Laine, J. (2006). "On the indirect polyelectrolyte titration of cellulosic fibers. Conditions for charge stoichiometry and comparison with ESCA," Langmuir 22(2), 824-830.
151. Hostetler, R. E., and Swanson, J. W. (1974). "Diffusion into and adsorption of polyethyeneimine on porous silica gel," J. Polymer Sci. Pt. A-Polymer Chem. 12(1), 29-43.
152. Hou, Q. X., Yuan, W., Zhang, S. Y., Zhao, J. P., Yang, B., and Zhang, H. J. (2010). "Partially substituting MgO for NaOH as the alkali source in the second-stage impregnation of triploid poplar P-RC APMP," Indust. Eng. Chem. Res. 49(7), 3088-3093.
153. Howard, R. C., and Jowsey, C. J. (1999). "The effect of cationic starch on the tensile strength of paper," J. Pulp Paper Sci. 15(6), J225-J229.
154. Hu, K. T., Ni, Y. H., and Zou, X. J. (2004). "Substitution of aspen high-yield pulp for hardwood kraft pulp in fine papers and its effect on AKD sizing," TAPPI J. 3(8), 13-16.
155. Huang, Y. C., Sanders, N. D., Fowkes, F. M., and Lloyd, T. B. (1991). "The impact of surface chemistry on particle electrostatic charging and viscoelasticity of precipitated calcium carbonate slurries," TAPPI 1991 Coating Conf., TAPPI Press, Atlanta, 123-129.
156. Hubbe, M. A. (1979). "A modified reporting procedure for polyelectrolyte titrations," Tappi 62(8), 120-121.
157. Hubbe, M. A. (1999). "Difficult furnishes," Proc. TAPPI '99, 1353-1367.
158. Hubbe, M. A. (2000). "Selecting and interpreting colloidal charge measurements," in: Proc. Scientific&Technical Advances in Wet End Chemistry, Barcelona, Spain, PIRA Intl., Leatherhead.
159. Hubbe, M. A. (2001). "Method for determining electrokinetic properties of papermaking furnish," U.S. Patent 6,176,974, Jan. 23, 2001.
160. Hubbe, M. A. (2002). "Fines management for increased paper machine productivity," Proc. Sci. Tech. Advan. Wet End Chem., PIRA, Vienna, Paper 3.
161. Hubbe, M. A. (2005a). "Why different charge demand test procedures can give different endpoints for aqueous samples from paper mills," Proc. Pira 2005 Sci. Tech. Advan. Wet End Chemistry, Lisbon, Portugal, Pira International, Leatherhead, Surrey, UK.
162. Hubbe, M. A. (2005b). "Dry-strength development by polyelectrolyte complex deposition onto non-bonding glass fibers," J. Pulp Paper Sci. 31(4), 159-166.
163. Hubbe, M. A. (2005c). "Microparticle programs for drainage and retention," in Rodriguez, J. M. (ed.), Micro and Nanoparticles in Papermaking, TAPPI Press, Atlanta, Chapter 1, 1-36.
164. Hubbe, M. A. (2006). "Sensing the electrokinetic potential of cellulosic fiber surfaces," BioResources 1(1), 116-149.
165. Hubbe, M. A. (2007a). "Water and papermaking. 1. Fresh water components," Paper Technol. 48(1), 18-24.
166. Hubbe, M. A. (2007b). "Water and papermaking. 2. White water components," Paper Technol. 48(2), 31-40.
167. Hubbe, M. A. (2007c). "Flocculation and redispersion of cellulosic fiber suspensions: A Review of effects of hydrodynamic shear and polyelectrolytes," BioResources 2(2), 296-331.
168. Hubbe, M. A. (2008). "Accurate charge-related measurements of samples from the wet end: Testing at low electrical conductivity," Paper Technol. 49(6), 21-26.
169. Hubbe, M. A., and Chen, J. (2004). "Charge-related measurements-A reappraisal. Part 1: Streaming current," Paper Technol. 45(8), 17-23.
170. Hubbe, M. A., Chen, H., and Heitmann, J. A. (2009). "Permeability reduction phenomena in packed beds, fiber mats, and wet webs of paper exposed to flow of liquids and suspensions: A review," BioResources 4(1), 405-451.
171. Hubbe, M. A., and Heitmann, J. A. (2007). "Review of factors affecting the release of water from cellulosic fibers during paper manufacture," BioResources 2(3), 500-533.
172. Hubbe, M. A., Heitmann, J. A., and Cole, C. A. (2008). "Water release from fractionated stock suspensions. 2. Effects of consistency, flocculants, shear, and order of mixing," TAPPI J. 7(8), 14-19.
173. Hubbe, M. A., Moore, S. M., and Lee, S. Y. (2005). "Effects of charge ratios and cationic polymer nature on polyelectrolyte complex deposition onto cellulose," Indus. Eng. Chem. Res. 44(9), 3068-3074.
174. Hubbe, M. A., and Rojas, O. J. (2008). "Colloidal stability and aggregation of lignocellulosic materials in aqueous suspension: A review," BioResources 3(4), 1419-1491.
175. Hubbe, M. A., Rojas, O. J., Lee, S. Y., Park, S., and Wang, Y. (2007a). "Distinctive electrokinetic behavior of nanoporous silica particles treated with cationic polyelectrolyte," Colloids and Surfaces A 292(2), 271-278.
176. Hubbe, M. A., Nanko, H., and McNeal, M. R. (2009). "Retention aid polymer interactions with cellulosic surfaces and suspensions: A Review," BioResources 4(2), 850-906.
177. Hubbe, M. A., Rojas, O. J., Lucia, L. A., and Jung, T. M. (2007b). "Consequences of the nanoporosity of cellulosic fibers on their streaming potential and their interactions with cationic polyelectrolytes," Cellulose 14(6), 655-671.
178. Hubbe, M. A., Rojas, O. J., and Venditti, R. A. (2006). "Control of tacky deposits on paper machines-A review," Nordic Pulp Paper Res. J. 21(2), 154-171.
179. Ingmanson, W. L. (1952). "An investigation of the mechanisms of water removal from pulp slurries," Tappi 35(10), 439-448.
180. Jacobs, A., and Dahlman, O. (2001). "Characterization of the molar masses of hemicelluloses from wood and pulps employing size exclusion chromatography and matrix-assisted laser desorption ionization time-of-flight mass spectrometry," Biomacromol. 2(3), 894-905.
181. Jano, I., and Hardcastle, J. E. (1999). "General equation for determining the dissociation constant of polyprotic acids and bases from additive properties. Part 1. Theory," Analytica Chimica Acta 390, 261-266.
182. Jansson, Z. L., and Brännvall, E. (2011). "Characterisation of dissolved spruce xylan in kraft cooking," Nordic Pulp Paper Res. J. 26(4), 380-385.
183. Järnström, L. (1993). "The polyacrylate demand in suspensions containing ground calcium carbonate," Nordic Pulp Paper Res. J. 8(1), 27-33.
184. Jaycock, M. J. (1995). "Assumptions made in the measurement of zeta-potential by streaming current/potential detectors," Paper Technol. 36(6), 35-38.
185. Johnsen, I. A., Lenes, M., and Magnusson, L. (2004). "Stabilization of colloidal wood resin by dissolved material from TMP and DIP," Nordic Pulp Paper Res. J. 19(1), 22-28.
186. Johnsen, I. A., and Stenius, P. (2007). "Effects of selective wood resin adsorption on paper properties," Nordic Pulp Paper Res. J. 22(4), 452-461.
187. Kabanov, V. A., and Zezin, A. B. (1984). "Soluble interpolymeric complexes as a new class of synthetic polyelectrolytes," Pure Appl. Chem. 56(3), 343-354.
188. Kam, S. K., and Gregory, J. (1999). "Charge determination of synthetic cationic polyelectrolytes by colloid titration," Colloids Surf. A - Physicochem. Eng. Aspects 159(1), 165-179.
189. Kasper, D. R. (1971). "Theoretical and experimental investigations of the flocculation of charged particles in aqueous solutions by polyelectrolytes of opposite charge," Ph.D. Diss., CIT, Pasadena, CA, 201 pp.
190. Kaunonen, A. (1989). "On-line retention and cationic demand measurement and their utilization on a paper machine," Paperi Puu 71(1), 46-52.
191. Katz, S., Beatson, R. P., and Scallan, A. M. (1984). "The determination of strong and weak acidic groups in sulfite pulps," Svensk Papperstidning 87, 48-53.
192. Kekkonen, J., Lattu, H., and Stenius, P. (2001). "Adsorption kinetics of complexes formed by oppositely charged polyelectrolytes," J. Colloid Interface Sci. 234(2), 384-392.
193. Kekkonen, J., Lattu, H., and Stenius, R. (2002). "Formation, adsorption and interactions of poly-DADMAC/pectic acid complexes," J. Pulp Paper Sci. 28(1), 6-12.
194. Kenaga, D. L., Kindler, W. A., and Meyer, F. J. (1967). "Studies of adsorption of cationic polyelectrolytes on pulp using streaming current detection," Tappi 50(7), 381-387.
195. King, C. A. (1992). "Charge and papermachine operation," TAPPI Papermakers Conf., 507-508.
196. Kirbawy, A. (1992). "A comparison of colloidal titration and zeta potential in wet end monitoring," TAPPI Papermakers Conf., TAPPI Press, Atlanta, 473-477.
197. Kiseleva, T. I., Shandryuk, G. A., Khasbiullin, R. R., Shcherbina, A. A., Chalykh, A. E., and Feldstein, M. M. (2011). "Phase state of polyelectrolyte complexes based on blends of acrylic copolymers," J. Appl. Polymer Sci. 122(5), 2926-2943.
198. Kitaoka, T., and Tanaka, H. (2001). "Novel paper strength additive containing cellulose-binding domain of cellulose," J. Wood Sci. 47(4), 322-324.
199. Kitaoka, T., and Tanaka, H. (2002). "Fiber charge characteristics of pulp suspension containing aluminum sulfate," J. Wood Sci. 48(1), 38-45.
200. Kleeman, S. (committee member) (2008). Chemical Additives for the Production of Pulp and Paper, ZELLCHEMING Tech. Committee, "Chemical Additives (CHAD)," Deutscher Fachverlag.
201. Koethe, J. L., and Scott, W. E. (1993). "Polyelectrolyte interactions with papermaking fibers: The mechanism of surface-charge decay," Tappi J. 76(12), 123-133 (1993).
202. Koetz, J., Koepke, H., Schmidt-Naake, G., Zarras, P., and Vogl, O. (1996). "Polyanion-polycation complex formation as a function of the position of the functional groups," Polymer 37(13), 2775-2781.
203. Kokko, S., Niinimäki, J., Zabihian, M., and Sundberg, A. (2004). "Effects of white water treatment on the paper properties of mechanical pulp - A laboratory study," Nordic Pulp Paper Res. J. 19(3), 386-391.
204. Koljonen, K., Mustaranta, A., and Stenius, P. (2004). "Surface characterisation of mechanical pulps by polyelectrolyte adsorption," Nordic Pulp Paper Res. J. 19(4), 495-505.
205. Koljonen, K., Österberg, M., Kleen, M., Fuhrmann, A., and Stenius, P. (2004). "Precipitation of lignin and extractives on kraft pulp: Effect on surface chemistry, surface morphology and paper strength," Cellulose 11(2), 209-224.
206. Koljonen, K., Österberg, M., and Stenius, P. (2001). "Surface chemistry and morphology of mechanical pulp fibres," 2001 IMPC: Mechanical Pulps - Added Value for Paper and Board, Proc. International Mechanical Pulping Conference, Helsinki, 305-314.
207. Konn, J., Pranovich, A., Fardim, P., and Holmbom, B. (2007). "Characterisation and effects of new anionic groups formed during chemithermomechanical pulping of spruce," Colloids Surf. A - Physicochem. Eng. Aspects 296(1-3), 1-7.
208. Kötz, J., Linow, K.-J., Philipp, B., and Dautzenberg, H. (1986). "Zur Bildung wasserlösloicher Polysalze. 4. Mitt.: Untersuchungen zum übergang vom löslichen Symplex zur Polysalzfällung," Acta Polymerica 37(2), 108-114.
209. Kötz, J., Paulke, B., Philipp, B., Denkinger, P., and Burchard, W. (1992). "Polyanion-polycation-complex formation of charged microgels and lattices with oppositely charged polyelectrolytes in solution," Acta Polymer. 43(4), 193-194.
210. Kramer, G., Buchhammer, H. M., and Lunkwitz, K. (1997a). "Surface modification by polyelectrolyte complexes: Influence of different polyelectrolyte components and substrates," Colloids Surf. A - Physicochem. Eng. Aspects 122(1-3), 1-12.
211. Kramer, G., Buchhammer, H. M., and Lunkwitz, K. (1997b). "Surface modification by polyelectrolyte complexes: Influence of modification procedure, polyelectrolyte components, and substrates," J. Appl. Polymer Sci. 65(1), 41-50.
212. Kukkola, J., Knuutinen, J., Paasivirta, J., Herve, S., Pessala, P., and Schultz, E. (2011). "Size-exclusion chromatographic study of ECF and TCF softwood kraft pulp bleaching liquors," Environ. Sci. Pollution Res. 18(7), 1049-1056.
213. Kunzel, U., and Prinz, M. (2006). "Fixatives for controlling of detrimental substances in the production of mechanical printing papers," Wochenbl. Papierfab. 134(22), 1324-1328.
214. Laine, J. (1997). "Effect of ECF and TCF bleaching on the charge properties of kraft pulp," Paperi Puu 79(8), 551-559.
215. Laine, J., Buchert, J., Viikari, L., and Stenius, P. (1996). "Characterization of unbleached kraft pulps by enzymatic treatment, potentiometric titration, and polyelectrolyte adsorption," Holzforschung 50(3), 208-214.
216. th Fundamental Research Symposium in the Fundamentals of Papermaking Materials, Cambridge, England, 859-892.
217. Laine, J., and Lindström, T. (2000). "The colloid/polyelectrolyte titration technique - A review and an appraisal of the technique," Proc. EC/COST E14 Workshop: New Measurement Techniques for Monitoring White Water Chemistry in Papermaking, Lisbon.
218. Laine, J., and Stenius, P. (1997). "Effect of charge on the fibre and paper properties of bleached industrial kraft pulps," Paperi Puu 79(4), 257-266.
219. La Mer, V. K., and Healy, T. W. (1963). "Adsorption-flocculation reactions of macro-molecules at the solid-liquid interface," Rev. Pure Appl. Chem. 13(suppl.), 112-133.
220. Lappan, R. E., Hrymak, A. N., and Pelton, R. (1996). "Polymer enhanced brownstock washing: Mill trial," TAPPI J. 79(11), 170-178.
221. Larnicol, P., Cabanne, L., Cudelou, J., and Guillaume, J. P. (2001). "New insights in silicate chemistry during alkaline peroxide brightening of mechanical pulps," 2001 IMPC: Mechanical Pulps - Added Value for Paper and Board, FPPRI, TAPPI, SPCI, Helsinki, 73-79.
222. 27 Al solid state NMR investigation," Langmuir 13(2), 147-152.
223. Lee, S. Y., and Hubbe, M. A. (2008). "Polyelectrolyte titrations of synthetic mineral microparticle suspensions to evaluate charge characteristics," Colloids Surf. A - Physicochem. Eng. Aspects 331(3), 175-182.
224. Lehmonen, J., Houni, J., Raiskinmaki, P., Vahasalo, L., and Gronroos, A. (2009). "The effects of pH on the accumulation of fines, dissolved and colloidal substances in the short circulation of papermaking," J. Pulp Paper Sci. 35(2), 46-52.
225. Leiviskä, T., and Rämö, J (2008). "Coagulation of wood extractives in chemical pulp bleaching filtrate by cationic polyelectrolytes," J. Hazard. Mater. 153(1-2), 525-531.
226. Leung, P. S., and Goddard, E. D. (1985). "A study of polycation - anionic-surfactant systems," Colloids Surf. 13(1), 47-62.
227. Levy, I., Nussinovitch, A., Shpigel, E., and Shoseyov, O. (2002). "Recombinant cellulose crosslinking protein: A novel paper-modification biomaterial," Cellulose 9(1), 91-98.
228. Li, H., and Ni, Y. (2001). "Sizing behavior of BCTMP at neutral to alkaline pH - Good results are possible with a combination of alum and PAE, or PEI alone," Pulp Paper Canada 120(6), 45-48.
229. Li, H., Ni, Y., and Sain, M. (2002a). "The presence of dissolved and colloidal substances in BCTMP and their effect on sizing," J. Pulp Paper Sci. 28(2), 45-49.
230. Li, H., Ni, Y., and Sain, M. (2002b). "Characterization of BCTMP fines and their effect on sizing," TAPPI J. 1(7), 3-7.
231. Li, T.-Q., Hendriksson, U., and Ödberg, L. (1993). "Determination of pore sizes in wood cellulose fibers by 2H and 1H NMR," Nordic Pulp Paper Res. J. 8(3), 326-330.
232. nd Intl. Papermaking Environ. Conf., 531-534.
233. Li, Z.-Q., Zhan, H.-Y., and Qin, M.-H. (2006). "Effect of pectinase treatment of DCS in BCTMP on the efficiency of cationic polymers," China Pulp Paper 25(8), 23-26.
234. Liang, J. D., He, Y. L., Zhu, J. W., and Du, W. J. (2011). "Accumulation of dissolved and colloidal substances in water recycled during papermaking," Chem. Eng. J. 168(2), 604-609.
235. TH ISETPP), Sun, R. C., and Fu, S. Y. (eds.), 1730-1734.
236. Lind, M. (2011). "De-bottlenecking a washing constraint," APPITA J. 64(2), 121-125.
237. Lindberg, L. E., Holmbom, B. R., Vaisanen, O. M., Weber, A. M. L., and Salkinoja-Salonen, M. S. (2001). "Degradation of paper mill water components in laboratory tests with pure cultures of bacteria," Biodegradation 12(3), 141-148.
238. Lindgren, J., Öhman, L.-O., Gunnars, S., and Wågberg, L. (2002). "Charge determinations of cellulose fibers of different origin - Comparison between different methods," Nordic Pulp Paper Res. J. 17(1), 89-96.
239. Lindström, T., Ljunggren, S., de Ruvo, A., and Söremark, C. (1978). "Dissolution of carbohydrates and lignin during beating of kraft pulps," Svensk Papperstidning 81(12), 397-402.
240. Lindström, T., and Söremark, C. (1976). "Adsorption of cationic polyacrylamides on cellulose," J. Colloid Interface Sci. 55(2), 305-312.
241. Lindström, T., Söremark, C., Heinegård, C., and Martin-Löf, S. (1974). "The importance of electrokinetic properties of wood fiber for papermaking," Tappi 57(12), 94-96.
242. Lingström, R., Wågberg, L., and Larsson, P. T. (2006). "Formation of polyelectrolyte multilayers on fibres: Influence on wettability and fibre/fibre interaction," Journal of Colloid&Interf. Sci. 296(2), 396-408.
243. Linhart, F., Auhorn, W. J., Degen, H. J., and Lorz, R. (1987). "'Anionic trash': Controlling detrimental substances," Tappi J. 70(10), 79-85.
244. Linke, W. F. (1968). "Retention and bonding of synthetic dry strength resins," Tappi 51(11), 59A-65A.
245. Lips, H. A. (1981). "Dyeing," In: Pulp and Paper Chemistry and Chemical Technology, Casey, J. P. (ed.), Vol. 3, Ch. 19, 1627-1666.
246. Lisboa, S. A., Evtuguin, D. V., Neto, C. P., and Goodfellow, B. J. (2005). "Isolation and structural characterization of polysaccharides dissolved in Eucalyptus globulus kraft black liquors," Carbohydr. Poly. 60(1), 77-85.
247. TH ISETPP), Sun, R. C., and Fu, S.Y. (eds.), Guangzhou, China, SCUT, 941-944.
248. Liu, K., Li, X.-F., Li, X.-M., He, B.-H., and Zhao, G.-L. (2010b). "Lowering the cationic demand caused by PGA in papermaking by solute adsorption and immobilized pectinase on chitosan beads," Carbohydrate Polymers 82(3), 648-652.
249. Liu, T. Z., Hu, H. R., He, Z. B., and Ni, Y. H. (2011). "Treatment of poplar alkaline peroxide mechanical pulping (APMP) effluent with Aspergillus niger," Bioresour. Technol. 102(15), 7361-7365.
250. Liu, W., Ni, Y., and Xiao, H. (2003). "Cationic montmorillonite: Preparation and synergy with anionic polymer in filler flocculation," J. Pulp Paper Sci. 29(5), 145-149.
251. Liu, X. A., Whiting, P., Pande, H., and Roy, D. N. (2001). "The contribution of different fractions of fines to pulp drainage in mechanical pulps," J. Pulp Paper Sci. 27(4), 139-143.
252. Lloyd, J. A., and Horne, C. W. (1993). "The determination of fiber charge and acidic groups of radiate pine pulps," Nordic Pulp Paper Res. J. 8(1), 48-52, 67.
253. Lofton, M. C., Moore, S. M., Hubbe, M. A., and Lee, S. Y. (2005). "Deposition of polyelectrolyte complexes as a mechanism of developing paper dry strength," Tappi J. 4(9), 3-7.
254. Lorz, R., and Linhart, F. (1993). "Kationischer Bedarf, CSB-Wert un Leitfähigkeit - Meß- und Steurgrößen für optimale Papierherstellung," Wochenbl. Papierfabr. 124(23/24), 1011-1016.
255. Louhelainen, J. H., and Alén, R. J. (2009). "Multivariate characterisation of chemical composition and combustion behaviour of black liquors by FTIR," APPITA J. 62(1), 60-63.
256. Lu, J., Jiang, X.-L., Li, Z., Rohani, S., and Ching, C. B. (2011). "Solubility of a lysozyme in polyelectrolyte aqueous solutions," J. Chem. Eng. Data 56(12), 4808-4812.
257. Lüttgen, W., and Göttsching, L. (1979). "über die durch gelöste Substanzen verursachte Belastung des Fabrikationswassers bei der Papierherstellung. Teil II: Enfluß der Art und Verogeschichte des Schleifholzes," Papier 33(11), 504-510.
258. Madsen, L. (2002). "Surface charge of calcite," Encyclopedia of Surface and Colloid Science 4, 4982-4994.
259. Magaton, A. S., Colodette, J. L., Pilo-Veloso, D., and Gomide, J. L. (2011). "Behavior of eucalyptus wood xylans across kraft cooking," J. Wood Chem. Technol. 31(1), 58-72.
260. Maltesh, C., and Shing, J. (1998). "Effects of water chemistry on flocculant makedown and subsequent retention and drainage performance," Proc. TAPPI 1998 Intl. Environ. Conf., 227 (1998).
261. Mandel, M. (1985). "Polyelectrolytes," Encyclopedia of Polymer Science and Engineering, 2nd Ed., Mark, H. F. (ed.), Wiley, New York, Vol 11, 739-829.
262. Marton, J. (1980a). "The role of surface chemistry in fines-alum interactions," Tappi 63(2), 121-125
263. Marton, J (1980b). "The role of surface chemistry in fines-cationic starch interactions," Tappi J. 63(4), 87-91.
264. Marton, J. (1991). "Practical aspects of alkaline sizing: Alkyl ketene dimer in mill furnishes," Tappi J. 74(8), 187-191.
265. Matijevic, E., and Stryker, L. J. (1966). "Coagulation and reversal of charge of lyophobic colloids by hydrolyzed metal ions. III. Aluminum sulfate," J. Colloid Interface Sci. 22(1), 68-77.
266. Maximova, N., Stenius, P., and Salmi, J. (2004). "Lignin uptake by cellulose fibres from aqueous solutions," Nordic Pulp Paper Res. J. 19(2), 135-145.
267. McMahon, D. H. (1980). "Analysis of low-levels of fatty and resin acids in kraft mill process streams," Tappi 63(9), 101-103.
268. th Fundamental Research Symposium, Cambridge, Sept. 2005, 1225-1267.
269. Medvecz, P. J. (1993). "Review of the chemical composition, process implications, measurement techniques, and control strategies for interfering substances in the papermaking process," TAPPI 1993 Papermakers Conf., 451-459.
270. Mehta, A., Sain, M., Ni, Y., and Morneau, D. (2004). "Chemical additive optimization program: Short-cycle clarification of deinking mill alkaline-water loop," Pulp & Paper-Canada 105(3), 43-46.
271. Mende, M., Petzold, G., and Buchhammer, H.-M. (2002). "Polyelectrolyte complex formation between poly(diallyldimethyl-ammonium chloride) and copolymers of acrylamide and sodium-acrylate," Colloid Polymer Sci. 280(4), 342-351.
272. Miao, C., Leduc, M., and Pelton, R. (2008). "The influence of polyvinylamine microgels on paper strength," J. Pulp Paper Sci. 34(1), 69-75.
273. TH ISETPP), Sun, R.C., and Fu, S. Y. (eds.), 846-849.
274. Miao, Q. X., Qin, M. H., Li, Z. Q., Mou, H. Y., and Shen, Q. J. (2006). "Release of anionic trashes and the effect of them on drainage properties of old newsprint deinked pulp," New Technologies in Non-Wood Fiber Pulping and Papermaking, Zhan, H. et al., (eds.), SCUT, Guangzhou, China, 445-449.
275. Michaels, A. S., Mir, L., and Schneider, N. S. (1965). "A conductometric study of polycation-polyanion reactions in dilute aqueous solution," J. Phys. Chem. 69(5), 1447-1455.
276. Mikkonen, M., and Eklund, D. (1998). "Die Adsorption von verschiedenen Polyakrylamiden an thermomechanischem Hozstoff in Gegenwart von gelösten und kolloidalen Stoffen," ("Adsorption of various polyacrylamides on thermomechanical pulp in the presence of dissolved and colloidal materials"), Wochenbl. Papierfabr. 126(2), 50-53.
277. Miranda, R., Balea, A., Sanchez de la Blanca, E., Carrillo, I., and Blanco, A. (2008). "Identification of recalcitrant stickies and their sources in newsprint production," Indust. Eng. Chem. Res. 47(16), 6239-6250.
278. Miranda, R., Blanco, A., and Negro, C. (2009a). "Accumulation of dissolved and colloidal material in papermaking - Application to simulation," Chem. Eng. J. 148(2-3), 385-393.
279. Miranda, R., Negro, C., and Blanco, A. (2009b). "Internal treatment of process waters in paper production by dissolved air flotation with newly developed chemicals. 1. Laboratory tests," Indust. Eng. Chem. Res. 48(4), 2199-2205.
280. Miranda, R., Negro, C., and Blanco, A. (2009c). "Internal treatment of process waters in paper production by dissolved air flotation with newly developed chemicals. 2. Field trials," Indust. Eng. Chem. Res. 48(7), 3672-3677.
281. Mocchiutti, P., Galván, M. V., Inalbon, M. C., and Zanuttini, M. A. (2011). "Improvement of paper properties of recycled unbleached softwood kraft pulps by poly(allylamine hydrochloride)," BioResources 6(1), 570-583.
282. Mocchiutti, P., and Zanuttini, M. A. (2005). "A useful equation for estimating the surface charge of pulp fibers," Tappi J. 4(5), 18-22.
283. Mocchiutti, P., and Zanuttini, M. A. (2007). "Key considerations in the determination of polyelectrolyte concentration by the colloidal titration method," BioResources 2(3), 399-407.
284. Monte, M. C., Ordonez, R., Hermosilla, D., Sanchez, M., and Blanco, A. (2011). "Comparison of ultrafiltration and dissolved air flotation efficiencies in industrial units during the papermaking process," APPITA J. 64(3), 245-251.
285. Monte, M. C., MacNeil, D., Negro, C., and Blanco, A. (2010). "Interactions of dissolved and colloidal material during the mixing of different pulps," Holzforschung 64(3), 277-283.
286. Moormann-Schmitz, A. M., Levin, R. J., and Young, M. W. (1944). "The specific role of PEI in improving paper machine efficiency," TAPPI 1994 Papermakers Conf., San. Francisco, CA, TAPPI Press, Atlanta.
287. Mosbye, J., and Moe, S. (2002). "The charge and chemical composition of fines in mechanical pulp," Nordic Pulp Paper Res. J. 17(3), 352-356.
288. Mou, H., and Qin, M. (2006). "Research on release of lignin in peroxide bleaching of waste at alkaline conditions," Research Progress in Pulping and Papermaking, 3rd International Symposium on Emerging Technologies of Pulping and Papermaking, SCUT, Guangzhou, China, 396-398.
289. Mou, H. Y., Qin, M. H., and Zhan, H. Y. (2008). "Pectinase lowers cationic demand of peroxide bleached deinked pulp," 2nd Intl. Papermaking Environ. Conf., 524-527.
290. Mustranta, A., Buchert, J., Spetz, P., and Holmbom, B. (2001). "Treatment of mechanical pulp and process waters with lipase," Nordic Pulp Paper Res. J. 16(2), 125-129.
291. Mutje, P., Vilaseca, F., Gou, M., and Pelach, M. A. (2001). "Interactions between a cationic polyelectrolyte and cellulose fibres bleached for paper manufacture," Afinidad 57(491), 29-38.
292. Naderi, A., Claesson, P. M., Bergström, M., and Dedinaite, A. (2005). "Trapped non-equilibrium states in aqueous solutions of oppositely charged polyelectrolytes and surfactants: Effects of mixing protocol and salt concentration," Colloids Surf. A - Physicochem. Eng. Aspects 253, 83-93.
293. Näsman, J., Lindholm, J., and Eklund, D., (1998). "Influence of cationic retention aids on flocculation of thermomechanical pulp," PTS Symp: Chemical Technology of Papermaking, paper 23 (23-1 to 23-8).
294. Neimo, L. (1993) "Coagulation of anionic fines and colloids originating in LWC broke," Nordic Pulp Paper Res. J. 8(1), 170-175.
295. Neto, C. P., Belino, E., Evtuguin, D., and Silvestre, A. J. D. (1999). "Total fractionation and analysis of organic components of industrial Eucalyptus globulus kraft black liquor," APPITA J. 52(3), 213-217, 225.
296. Ni, Y. H., He, Z. B., Zhang, H. J., and Zhou, Y. J. (2011). "Characteristics of high yield pulp and its effect on some typical wet-end issues," J. Biobased Mater. Bioenergy 5(2), 181-186.
297. Nicke, R., Pensold, S., Tappe, M., and Hartmann, H.-J. (1992). "Polydiallyldimethyl-ammoniumchlorid als Flockungsmittel," Wochenbl. Papierfabr. 120(14), 559-562.
298. Nicu, R., Bobu, E., and Desbrieres, J. (2011). "Chitosan as cationic polyelectrolyte in wet-end papermaking systems," Cellulose Chem. Technol. 45(1-2), 105-111.
299. Nikkinen, J., Bley, L., and Berger, R. (2001). "Process optimisation by continuous charge measurements at different points in the thick stock," Wochenbl. Papierfabr. 129(13), 893-897.
300. Novakov, I. A., Radchenko, F. S., Ozerin, A. S., and Rybakova, E. V. (2011). "Interaction of aluminum polyhydroxochloride sol and poly(4-vinylbenzene sulfonic acid) sodium salt," Polymer Sci. Ser. A 53(5), 364-368.
301. Nuopponen, M., Willför, S., Jääskeläinen, A. S., Sundberg, A., and Vuorinen, T. (2004). "A UV resonance Raman (UVRR) spectroscopic study on the extractable compounds of Scots pine (Pinus sylvestris) wood Part I: Lipophilic compounds," Spectrochim. Acta Part A - Molec. Biomolec. Sectros. 60(13), 2953-2961.
302. Nuortila-Jokinen, J., Uusluoto, T., and Nyström, M. (1994). "Removal of disturbing substances by ultrafiltration of make-up waters in the pulp and paper-industry," Paperi Puu 76(4), 256-261.
303. Nurmi, M., Bykata, J., and Eklund, D. (2004). "On the interaction between cationic polyacrylamide and dissolved and colloidal substances in thermomechanical pulp," Paperi Puu 86(2), 109-112.
304. Nurmi, M., and Eklund, D. (2000). "Effect of cationic polyacrylamide on colloidal wood resin," Paperi Puu 82(5), 331-334.
305. Nylund, J., Sundberg, A., and Sundberg K. (2007). "Dissolved and colloidal substances from a mechanical pulp suspension - Interactions influencing the sterical stability," Colloids and Surfaces A, Physiochem. Eng. Aspects 301, 335-340.
306. Nyman, V., and Rose, G. (1986). "The colloidal behavior of kraft lignin and lignosulfonates," Colloids Surf. 21, 125-147.
307. Nyström, M., Pykalainen, J., and Lehto, J. (1993). "Peroxide bleaching of mechanical pulp using different types of alkali," Paperi Puu 75(6), 419-425.
308. Ödberg, L., Sandberg, S., Welin-Klintström, S., and Arwin, H. (1995). "Thickness of adsorbed layers of high molecular weight polyelectrolytes studied by ellipsometry," Langmuir 11, 2621-2625.
309. Orblin, E., and Fardim, P. (2011). "Interactions between cationic polyelectrolyte and pulp fines," BioResources 6(3), 2340-2355.
310. Ordonez, R., Hermosilla, E., de al Fuente, E., and Blanco, A. (2009). "Influence of water quality on the efficiency of retention aids system for the paper industry," Indust. Eng. Chem. Res. 48(23), 10247-10252.
311. Ojala, T. (1993). "Charge measurements of different furnishes using polyelectrolyte titration with a streaming current detector," TAPPI Papermakers Conf., TAPPI Press, Atlanta, 613-626.
312. Opedal, M. T., Stenius, P., Johansson, L., Hill, J., and Sandberg, C. (2011). "Removal of dissolved and colloidal substances in water from compressive pre-treatment of chips using dissolved air flotation. Pilot trial," Nordic Pulp Paper Res. J. 26(4), 364-385.
313. Orccotoma, J. A., Paris, J., and Perrier, M. (1999). "Dynamic analysis of fibrous material and dissolved solids distribution in the wet-end of a newspring mill," APPITA J. 52(2), 105-113.
314. Örså, F., and Holmbom, B. (1994). "A convenient method for the determination of wood extractives in papermaking process waters and effluents," J. Pulp Paper Sci. 20(12), J361-J365.
315. Örså, F., Holmbom, B., and Thornton, J. (1997). "Dissolution and dispersion of spruce wood components into hot water," Wood Sci. Technol. 31(4), 279-290.
316. Otero, D., Sundberg, K., Blanco, A., Negro, C., Tijero, J., and Holmbom, B. (2000). "Effects of wood polysaccharides on pitch deposition," Nordic Pulp Paper Res. J. 15(5), 607-613.
317. Pacheco, C. R. F., de Paiva, J. L., and Reynol, A. S. (2006). "Operational evaluation of rotary drum filters for brownstock washing using basic filtration parameters," TAPPI J. 5(3), 15-20.
318. Park, S., Venditti, R. A., Abrecht, D. G., Jameel, H., Pawlak, J. J., and Lee, J. M. (2007). "Surface and pore structure modification of cellulose fibers through cellulase treatment," J. Appl. Polymer Sci. 103(6), 3833-3839.
319. Patton, P. A., and Lee, D. T. (1993). "Charge analyses: Powerful tools in wet-end optimization," Tappi J. 76(8), 107-115.
320. Pelton, R. (2010). "The streaming current detector (SCD) - What does it really tell us?" APPITA J. 63(3), 196-198.
321. Pelton, R. H., Allen, L. H., and Nugent, H. M. (1980a). "Survey of potential retention aids for newsprint manufacture," Pulp Pap. Can. 81(1), 54-56, 58-60, 62.
322. Pelton, R. H., Allen, L. H., and Nugent, H. M. (1980b). "Factors affecting the effectiveness of some retention aids in newsprint pulp," Svensk Papperstidning 83(9), 251-258.
323. Pelton, R., Cabane, B., Cui, Y. G., and Ketelson, H. (2007). "Shapes of polyelectrolyte titration curves. 1. Well-behaved strong polyelectrolytes," Anal. Chem. 79(21), 8114-8117.
324. Pelzer, R. (2008). "Polyacrylamides (PAM) as retention aids," in Chemical Additives for the Production of Pulp and Paper, Zellcheming Technical Committee "Chemical Additives (CHAD)," Deutscher Fachverlag, Ch. 7.3, 139-151.
325. Penniman, J. G. (1992). "Comparison of pulp pad streaming potential measurement and mobility measurement," Tappi J. 75(8), 111-115.
326. Penniman, J. G., and Makhonin, A. G. (1993). "Optimizing microparticulate process efficiency," Proc. TAPPI 1993 Papermakers Conf., 129-140.
327. Petander, L., Ahlskog, T., and Juppo, A. J. (1998). "Strategies to reduce AKD deposits on paper machines," Paperi Puu 80(2), 100-103.
328. Petlicki, J., and van de Ven, T. G. M. (1994). "Adsorption of polyethyeneimine onto cellulose fibers," Colloids Surf. A: Physicochem. Eng. Aspects 83(1), 9-23.
329. Petrov, A. I., Antipov, A. A., and Sukhorukov, G. B. (2003). "Base-acid equilibria in polyelectrolyte systems: From weak polyelectrolytes to interpolyelectrolyte complexes and multilayered polyelectrolyte shells," Macromolecules 36(26), 10079-10086.
330. Petzold, G., Schwarz, S., Buchhammer, H. M., and Lunkwitz, K. (1997). "A very effective method for the cationic modification of cellulose," Angew. Makromol. Chem. 253(1), 1-15.
331. Phipps, J. S. (1999). "Some mechanistic insights for using the streaming current detector to measure wet-end charge," Tappi J. 82(8), 157-165.
332. Pierre, A., Lamarche, J. M., Mercier, R., and Foissy, A. (1990). "Calcium as potential determining ion in aqueous calcite suspensions," J. Dispersion Sci. Technol. 11(6), 611-635.
333. Pietschker, D. A. (1996). "The 100% closed water system - What to expect," TAPPI Papermakers Conf., TAPPI Press, 521-528.
334. Pirttinen, E., Stenius, P., and Kovasin, K. (2007). "Surfactant phase equilibria and separation of amphiphilic extractives from black liquor in kraft cooking of wood," J. Dispersion Sci. Technol. 28(1), 5-10.
335. Polderman, A. (1975). "Interaction between 2 oppositely charged polyelectrolytes," Biopolymers 14(10), 2181-2195.
336. Polverari, M., Allen, L., and Sithole, B. (2001). "Effects of system closure on retention and drainage aid performance in TMP newsprint manufacture. Part 2," Proc. TAPPI Papermakers Conf., TAPPI Press, Atlanta, 13-33.
337. Pranovich, A., Sundberg, K., and Holmbom, B. (2003). "Chemical changes in thermomechanical pulp at alkaline conditions," J. Wood Chem. Technol. 23(1), 89-112.
338. Pranovich, A.V., Reunanen, M., Sjöholm, R., and Holmbom, B. (2005). "Dissolved lignin and other aromatic substances in thermomechanical pulp waters," Journal of Wood Chemistry and Technology 25(3), 109-132.
339. Prinsen, P., Gutierrez, A., Rencoret, J., Nieto, L., Jimenez-Barbero, J., Burnet, A., Petit-Conil, M., Colodette, J. L., Martinez, A. T., and del Rio, J. C. (2012). "Morphological characteristics and composition of lipophilic extractives and lignin in Brazilian woods from different eucalypt hybrids," Industr. Crops Prod. 36(1), 572-583.
340. Pruszynski, P. (2012). Personal correspondence.
341. Pruszynski, P., and Jakubowski, R. (2002). "Impact of conductivity and cationic demand on drainage of TMP-based newsprint furnish," APPITA Ann. General Conf., 323-331.
342. Pruszynski, P., and Jakubowski, R. (2006). "Understanding sensitivity of retention programs to wet end chemical contamination in TMP-based newsprint furnish," APPITA J. 59(2), 114-119.
343. Pruszynski, P., Quinn, M., Kamlin, B., Sherman, L., Wong-Shing, J., and Govoni, S. (2011). "Managing anionic detrimental substances in peroxide bleached mechanical pulps - Unique benefits of enzymatic treatment," APPITA J. 64(2), 169-174.
344. Przybysz, K., and Szwarcsztajn, E. (1973). "Effect of crill on pulp freeness," Przeglad Papier 29(4), 105-108.
345. Puro, L., Kallioinen, M., Manttari, M., and Nystrom, M. (2011). "Evaluation of behavior and fouling potential of wood extractives in ultrafiltration of pulp and paper mill process water," J. Membrane Sci. 368(1-2), 150-158.
346. Rantala, T., Nokelainen, J., and Lang, D. (1999). "Wet end management by controlling consistencies and charge," Papier 53(10A), V29-V34.
347. Rautiainen, R., and Alén, R. (2010). "Characterization of black liquors from kraft pulping of first-thinning Scots pine (Pinus sylvestris L.)," Holzforschung 64(1), 7-12.
348. Reid, I., and Ricard, M. (2000). "Pectinase in papermaking: Solving retention problems in mechanical pulps bleached with hydrogen peroxide," Enzyme Microb. Technol. 26(2-4), 115-123.
349. Reiter, C., Reinhardt, B., and Westerkamp, M. (1998). "Umfassende Störstoffbestimmung eines Spezialpapierherstellers," Wochenbl. Papierfabr. 129(1), 7-14.
350. rd Ed., Casey, J. P. (ed.), Wiley-Interscience, New York, Vol. 3, Ch. 13, pp. 1447-1474.
351. Ribe, E., Lindblad, M. S., Dahlman, O., and Theliander, H. (2010). "Xylan sorption kinetics at industrial conditions. Part 1. Experimental results," Nordic Pulp Paper Res. J. 25(2), 138-149.
352. Ricard, M., Orccotoma, J. A., Ling, J., and Watson, R. (2005). "Pectinase reduces cationic chemical costs in peroxide-bleached mechanical grades," Pulp Paper Can. 106(12), 84-88.
353. Ricard, M., and Reid, I. D. (2004). "Purified pectinase lowers cationic demand in peroxide-bleached mechanical pulp," Enzyme Microb. Technol. 34(5), 499-504.
354. Ricard, M., Reid, I., and Orccotoma, J. A. (2005). "Pectinase reduces the cationic demand of peroxide-bleached TMP: A paper machine trial," Pulp Paper Can. 106(12), 78-83.
355. Rice, M., and Roeraade, J. (2003). "Continuous filtration and titration apparatus for real time monitoring of polyelectrolyte concentration and cationic demand of a paper furnish," Nordic Pulp Paper J. 18(1), 95-107.
356. Richardson, B. (2005). "Monitoring carryover at the brownstock washers," Pulp Paper Can. 106(6), 43-47.
357. Ringenbach, E., Chauveteau, G., and Pefferkorn, E. (1995). "Effect of soluble aluminum ions on polyelectrolyte-alumina interaction. Kinetics of polymer adsorption and colloid stabilization," Colloids Surf. A - Physicochem. Eng. Aspects 99(2-3), 161-173.
358. Ristolainen, M., and Alén, R. (1998). "Characterization of effluents from TCF bleaching of softwood kraft pulp," TAPPI J. 81(9), 195-198.
359. Ristolainen, M., Alen, R., and Knuutinen, J. (1996). "Characterization of TCF effluents from kraft pulp bleaching. 1. Fractionation of hardwood lignin-derived material by GPC and UF," Holzforschung 50(1), 91-96.
360. Roltsch, C. C., and Lloyd, T. A. (1987). "The efficient use of fluorescent whitening agents in the paper industry," TAPPI 1987 Papermakers Conf., TAPPI Press, Atlanta, 87-99.
361. Rowan, D. S., and Scott, W. E. (1992). "Colloidal properties of dissolved kraft lignin," TAPPI Papermakers Conf., Book 1, 59-62.
362. Rundlöf, M., Eriksson, M., Ström, H., and Wågberg, L. (2002). "Effect of mannanase and lipase on the properties of colloidal wood extractives and their interaction with mechanical pulp fines," Cellulose 9(2), 127-137.
363. Saarimaa, V. J., and Pranovich, A. V. (2007). "Isolation of pectic acids from bleached TMP water and aggregation of model and TMP pectic acids by calcium," BioResources 2(4), 638-651.
364. Saarimaa, V., Sundberg, A., Holmbom, B., Blanco, A., Negro, C., and Fuente, E. (2006a). "Purification of peroxide-bleached TMP water by dissolved air flotation," TAPPI J. 5(5), 15-21.
365. Saarimaa, V., Vähäsalo, L., Sundberg, A., Pranovich, A., Holmbom, B., Svedman, M., and Örså, F. (2006b). "Influence of pectic acids on aggregation and deposition of colloidal pitch," Nordic Pulp Paper Res. J. 21(5), 613-619.
366. Saastamoinen, S., Neimo, L., Korpela, M. S., and Paulapuro, H. (1996). "The effect of alum and two fixatives in reducing silicate residuals in the white water system of a paper machine," Paperi Puu 78(3), 108-112.
367. Samoshina, Y., Nylander, T., Shubin, V., Bauer, R., and Eskilsson, K. (2005). "Equilibrium aspects of polycation adsorption on silica surface: How the adsorbed layer responds to changes in bulk solution," Langmuir 21(13), 5872-5881.
368. Sandell, L. S., and Luner, P. (1974). "Flocculation of microcrystalline cellulose with cationic ionene polymers," J. Appl. Polymer Sci. 18(7), 2075-2083.
369. Sanders, N. D. (1992). "The effect of surface modification of pigments on colloidal stability and structural performance," J. Pulp Paper Sci. 18(5), J169-J175.
370. Sanders, N. D., and Schaefer, J. H. (1995). "Comparing papermaking wet-end charge-measuring techniques in kraft and groundwood systems," TAPPI J. 78(11), 142-150.
371. Sato, H., and Nakajima, A. (1975). "Formation of a polyelectrolyte complex from carboxymethyl cellulose and poly(ethylenimine)," Polymer J. 7(2), 241-247.
372. Sato, T., Ali, M. M., Pelton, R., and Cranston, E. D. (2012), "DNA stickers promote polymer adsorption onto cellulose," Biomacromolecules 13(10), 3173-3180.
373. Scallan, A. M., and Tigerström, A. C. (1992). "Swelling and elasticity of the cell walls of pulp fibers," J. Pulp Paper Sci. 18(5), J188-J193.
374. Schemp, W. (1988). "Polyelectrolyttitration - Zetapotential. Ein kritischer Vergleich," Wochenbl. Papierfabr. 116(20), 860-872.
375. Schindler, T., and Nordmeier, E. (1994). "Studies on the formation and aggregation of polyelectrolyte complexes formed between poly(styrenesulfonic acid) and poly(diallyl-N,N-dimethylammonium chloride)," Polymer J. 26(10), 1124-1131.
376. Shirazi, M., van de Ven, T. G. M., and Garnier, G. (2003). "Adsorption of modified starches on pulp fibers," Langmuir 19(26), 10835-10842.
377. Sihvonen, A. L., Sundberg, K., Sundberg, A., and Holmbom, B. (1998). "Stability and deposition tendency of colloidal wood resin," Nordic Pulp Paper Res. J. 13(1), 64-67.
378. Silvestre, A. J. D., Pereira, C. C. L., Neto, C. P., Evtuguin, D. V., and Cavaleiro, J. A. S. (2000). "An easy assessment of the composition of low-molecular-weight organic components of industrial Eucalyptus globulus kraft black liquor," J. Pulp Paper Sci. 26(12), 421-427.
379. SjÖdin, U., and Ödberg, L. (1996). "The influence of metal ions on polyelectrolyte titration," Colloids Surf. A-Physicochem. Eng. Aspects 116(3), 269-275.
380. Sjöholm, E., Norman, E., and Colmsjö, A. (2000). "Charge density of lignin samples from kraft cooking of birch wood," J. Wood Chem. Technol. 20(4), 337-356.
381. Sjöström, E. (1989). "The origin of charge on cellulosic fibers," Nordic Pulp Paper Res. J. 4(2), 90-93 (1989).
382. Sjöström, J. (1990). "Fractionation and characterization of organic substances dissolved in water during groundwood pulping of spruce," Nordic Pulp Paper Res. J. 5(1), 9-15.
383. Sjöström, L., Jacobs, A., Radeström, R., and Nordlund, M. (2006). "Effects of released organic substances on sizing efficiency-Influence of origin, composition and molecular properties of the organic material," Nordic Pulp Paper Res. J. 21(5), 575-585.
384. Sjöström, L., Laine, J., and Blademo, Å. (2000). "Release of organic substances from bleached sulfate pulps during slushing and refining," Nordic Pulp Paper Res. J. 15(5), 469-475.
385. Smith-Palmer, T., and Pelton, R. (2002). "Flocculation of particles," in: Encyclopedia of Surface and Colloid Science, Vol. 2, 2207-2224.
386. Sondi, I., Milat, O., and Pravdic, V. (1997). "Electrokinetic potentials of clay surfaces modified by polymers," J. Colloid Interface Sci. 189, 66-73.
387. Spence, G., Underwood, R., and Yarnell, J. (1997). "Titration procedure for determining the level of anionic impurities in a pulp furnish," PaperAge 113(7), 30-31.
388. Springer, A. M., and Taggart, T. E. (1986). "Quantitative evaluation of alternative methods of determining total charge," Tappi J. 69(5), 116-121.
389. St. John, M. R., and Gallagher, T. (1992). "Evaluation of the charge state of papermachine systems using the charge titration method," Proc. TAPPI 1992 Papermakers Conf., 479-502.
390. Stetter, A., and Eisenschmid, K. (1993). "Erfahrungen mit Meß- und Regelanlagen im Kreislauf der Altpapieraufbereitung," Wochenbl. Papierfabr. 121(23/24), 1018-1023.
391. Stitt, J. B. (1998). "Charge control helps tissue producers achieve quality, productivity benefits," Pulp Paper 72(5), 109-114.
392. Stone, J. E., and Scallan, A. M. (1968). "A structural model for the cell wall of water-swollen wood pulp fibres based on their accessibility to macromolecules," Cellulose Chem. Technol. 2(3), 343-358.
393. Stone, J. E., and Scallan, A. M. (1966). "Influence of drying on the pore structures of the cell wall," In: Consolidation of the Paper Web, Trans. Symp. Cambridge, Sept. 1965, Vol. 1, Bolam, F. (Ed.), Tech. Section British Paper and Board Makers Assoc., London, 145-174.
394. Strand, A., Sundberg, A., Vähäsalo, L., and Holmbom, B (2011). "Influence of pitch composition and wood substances on the phase distribution of resin and fatty acids at different pH levels," J. Dispersion Sci. Technol. 32(5), 702-709.
395. Stratton, R. A., and Swanson, J. W. (1981). "Electrokinetics in papermaking. A position paper," Tappi 64(1), 79-83.
396. Strazdins, E. (1972). "Factors affecting the electrokinetic properties of cellulose fibers," Tappi 55(12), 1691-1695.
397. Strazdins, E. (1977). "Optimization of the papermaking process by electrophoresis," Tappi 60(7), 113-114.
398. Strazdins, E. (1980). "New chemical approaches towards optimizing dry strength of stock furnishes containing waste paper," Papier 34(10A), V49-V55.
399. Strazdins, E. (1989). "Theoretical and practical aspects of alum use in papermaking," Nordic Pulp Paper Res. J. 4(2), 128-134.
400. Strazdins, E. (1994). "Application of electrokinetics in optimization of wet-end chemistry," In: Wet-Strength Resins and their Application, L. L. Chan (ed.), TAPPI Press, Ch. 4.
401. Ström, G., Barla, P., and Stenius, P. (1979). "The formation of lignin sulfonate-polyethyleneimine complexes and its influence on pulp drainage," Svensk Papperstidning 82(14), 408-413.
402. Ström, G., Barla, P., and Stenius, P. (1982). "The effect of pine xylan on the use of some polycations as retention and drainage aids," Svensk Papperstidning 85(12), R100-R106.
403. Ström, G., and Stenius, P. (1987). "Wechselwirkung zwischen kationischen Polymeren und anionischen Holzpolymeren sowie deren Einfluß auf die Papeirstoff-Entwässerung," Wochenbl. Papierfabr. 115(9), 383-388.
404. Sundberg, A., Ekman, R., Holmbom, B., Sundberg, K., and Thornton, J. (1993). "Interactions between dissolved and colloidal substances and a cationic fixing agent in mechanical pulp suspensions," Nordic Pulp Paper Res. J. 8(1), 226-231.
405. Sundberg, A., Ekman, R., Holmbom, B., and Grönfors, H. (1994a). "Interactions of cationic polymers with components in thermomechanical pulp suspensions," Paperi Puu 76(9), 593-598.
406. Sundberg, A., Sundberg, K., Lillandt, C., and Holmbom, B. (1996). "Determination of hemicelluloses and pectins in wood and pulp fibres by acid methanolysis and gas chromatography," Nordic Pulp Paper Res. J. 11(4), 216-219, 226.
407. Sundberg, A., Pranovich, A., and Holmbom, B. (2000a). "Distribution of anionic groups in TMP suspensions," J. Wood Chem. Technol. 20(1), 71-92.
408. Sundberg, A., Holmbom, B., Willför, S., and Pranovich, A. (2000b). "Weakening of paper strength by wood resin," Nordic Pulp Paper Res. J. 15(1), 46-53.
409. Sundberg, A., Pranovich, A., and Holmbom, B. (2003). "Chemical characterization of various types of mechanical pulp fines," J. Pulp Paper Sci. 29(5), 173-178.
410. Sundberg, A., Strand, A., Vähäsalo, L., and Holmbom, B. (2009). "Phase distribution of resin and fatty acids in colloidal wood pitch emulsions at different pH-levels," J. Dispersion Sci. Technol. 30(6), 912-919.
411. Sundberg, K. E., Sundberg, A. C., Thornton, J. W., and Holmbom, B. R. (1998). "Pectic acids in the production of wood-containing paper," Tappi J. 81(7), 131-136.
412. Sundberg, K., Thornton, J., Holmbom, B., and Ekman, R. (1994b). "Effects of wood polysaccharides on the stability of colloidal wood resin," J. Pulp Paper Sci. 22, J226-230.
413. Swerin, A., and Ödberg, L. (1993). "Flocculation of cellulosic fiber suspensions by model microparticulate retention aid systems," Nordic Pulp Paper Res. J. 8(4), 389-398.
414. th Fundamental Research Symposium, Cambridge, UK, Pira International, Leatherhead, Surrey, UK, Vol. 1, 265-350.
415. Swerin, A., and Wågberg, L. (1994). "Size-exclusion chromatography for characterization of cationic polyelectrolytes used in papermaking," Nordic Pulp Paper Res. J. 9(1), 18-25.
416. Taipale, T., Holappa, S., and Laine, J. (2011). "Isolation and characterization of cellulosic pulp fines and their interactions with cationic polyacrylamides," J. Dispersion Sci. Technol. 32(6), 863-873.
417. Tanaka, H. (1983). "The methods for rejection of salts interference on colloidal titration," Japan TAPPI J. (Kami pa Gikyoshi) 37(11), 39-44 (also numbered as 1005-1010).
418. Tanaka, H., and Ichiura, H. (1999). "A novel and simple method for determining the cationic demand of suspensions using chromophoric labeled cationic polymers," Colloids Surf. A-Physicochem. Aspects 159(1), 103-107.
419. Tanaka, H., Swerin, A., Ödberg, L., and Park, S. B. (1997). "Competitive adsorption of cationic polyacrylamides with different molecular weights onto polystyrene latex, cellulose beads and cellulose fibres," J. Pulp Paper Sci. 23(8), 359-365.
420. Tanase, M., Stenius, P., Johansson, L., Hill, J., and Sandberg, C. (2010). "Mass balance of lipophilic extractives around impressafiner in mill and pilot scale," Nordic Pulp Paper Research J. 25(2), 162-169.
421. TAPPI (1997). "Fines fraction of paper stock by wet screening," TAPPI Test Methods, T261 cm-94.
422. Terayama, H. J. (1952). "Method of colloid titration (a new titration between polymer ions)," Polymer Sci. 8, 243-153.
423. Thornton, J. W. (1994). "Enzymatic degradation of polygalacturonic acids released from mechanical pulp during peroxide bleaching," Tappi J. 77(3), 161-167.
424. Thornton, J. W., Eckermann, C. S., Eckman, R. O., and Holmbom, B. R. (1996). "Treatment of alkaline bleached mechanical wood pulp with pectinase," U.S. Patent 5,487,812.
425. Thornton, J., Ekman, R., Holmbom, B., and Eckerman, C. (1993). "Release of potential anionic trash in peroxide bleaching of mechanical pulp," Paperi Puu 75(6), 426-431.
426. Thornton J., Ekman, R., Holmbom, B., and Örså, F. (1994a). "Polysaccharides dissolved from Norway spruce in thermomechanical pulping and peroxide bleaching," J. Wood Chem. Technol. 14(2), 159-175.
427. Thornton J., Ekman, R., Holmbom, B., and Pettersson, C. (1994b). "Effects of alkaline treatment on dissolved carbohydrates in suspension of Norway spruce thermomechanical pulp," J. Wood Chem. Technol. 14(2), 176-194.
428. Tijero, A., Monte, M. C., and Blanco, A. (2012). "Use of talc to control problems associated with dissolved and colloidal material in papermaking," Tappi J. 11(2), 43-51.
429. Toledano, A., Serrano, L., Garcia, A., Mondragon, I., and Labidi, J. (2010). "Comparative study of lignin fractionation by ultrafiltration and selective precipitation," Chem. Eng. J. 157(1), 93-99.
430. Tripattharanan, T., Hubbe, M. A., Heitmann, J. A., and Venditti, R. A. (2004). "Effect of idealized flow conditions on retention aid performance. Part 2: Polymer bridging, charged patches, and charge neutralization," Appita J. 57(6), 448-454.
431. Trksak, R. M. (1990). "Aluminum compounds as cationic donors in alkaline papermaking systems," Proc. TAPPI 1990 Papermakers Conf., TAPPI Press, Atlanta, 229-237.
432. Ullner, M., and Jonsson, B. (1996). "A Monte Carlo study of titrating polyelectrolytes in the presence of salt" Macromol. 29(20), 6645-6655.
433. Unbehend, J. E. (1976). "Mechanisms of 'soft' and 'hard' floc formation in dynamic retention measurement" Tappi 59(10), 74-77.
434. Valto, P., Knuutinen, J., and Alén, R. (2009). "Evaluation of resin and fatty acid concentration levels by online sample enrichment followed by atmospheric pressure chemical ionization-mass spectrometry (APCI-MS)" Environ. Sci. Pollution Res. 16(3), 287-294.
435. Valto, P., Knuutinen, J., and Alén, R. (2011). "Direct injection analysis of fatty and resin acids in papermaking process waters by HPLC/MS" J. Separation Sci. 34(8), 925-930.
436. Valto, P., Knuutinen, J., Alén, R., Rantalankila, M., Lehmonen, J., Grönroos, A., and Houni, J. (2010). "Analysis of resin and fatty acids enriched in papermaking process waters," BioResources 5(1), 172-186.
437. van de Steeg, H. G. M., Cohen Stuart, M. A., de Keizer, A., and Bijsterbosch, B. H. (1992). "Polyelectrolyte adsorption: A subtle balance of forces," Langmuir 8, 2538-2546.
438. van de Steeg, H. G. M., de Keizer, A., Cohen Stuart, M. A., and Bijsterbosh, B. H. (1993). "Adsorption of cationic potato starch on microcrystalline cellulose" Colloids Surf. A: Physicochem. Eng. Aspects 70, 91-103.
439. van de Ven (2000). "A model for the adsorption of polyelectrolytes on pulp fibers: Relation between fiber structure and polyelectrolyte properties," Nordic Pulp Paper Res. J. 15(5), 494-501.
440. van der Gucht, J., Spruijt, E., Lemmers, M., and Cohen Stuart, M. A. (2011). "Polyelectrolyte complexes: Bulk phases and colloidal systems," J. Colloid Interface Sci. 361(2), 407-422.
441. Vanerek, A., and van de Ven, T. G. M. (2006). "Coacervate complex formation between cationic polyacrylamide and anionic sulfonated kraft lignin," Colloids Surf. A-Physicochem. Aspects 273(1-3), 55-62.
442. Vannerberg, N.-G. (1992). "The importance of YKI's support to Eka Nobel," Annual Report of Ytkemiska Institutet, KTH, Stockholm, Sweden.
443. Veal, C. R. (1997). "On-line cationic demand measurement for wet end papermaking," TAPPI Engineering&Papermakers: Forming Bonds for Better Papermaking, Nashville, TAPPI, 287-296.
444. Vercoe, D., Stack, K., Blackman, A., and Richardson, D. (2005). "A multicomponent insight into the interactions leading to wood pitch deposition," Appita J. 58(3), 208-213.
445. Vu, T. H. M., Alén, R., and Pakkanen, H. (2003). "Delignification of bamboo (Bambusa procera Acher)-Part 2. Characterisation of kraft black liquors from different cooking conditions," Holzforschung 57(6), 619-626.
446. Wackerberg, E., Johansson, K., and Wallin, S. (1994). "Microparticle technology in clay-filled groundwood specialty printing grades produced under neutral or alkaline conditions," Pulp Pap. Can. 95(7), 44-48.
447. Wågberg, L. (2000). "Polyelectrolyte adsorption onto cellulose fibres-A review," Nordic Pulp Pap. Res. J. 15(5), 586-597.
448. Wågberg, L., Björklund, M., Åsell, I., and Swerin, A. (1996). "On the mechanism of flocculation by microparticle retention-aid systems," Tappi J. 79(6), 157-164.
449. Wågberg, L. and Ödberg, L. (1991). "The action of cationic polyelectrolytes used for the fixation of dissolved and colloidal substances," Nordic Pulp Paper Res. J. 6(3), 127-135.
450. Wågberg, L., Ödberg, L., and Glad-Nordmark, G. (1989). "Charge determination of porous substrates by polyelectrolyte adsorption. Part 1. Carboxymethylated, bleached cellulosic fibers," Nordic Pulp Paper Res. J. 4(2), 71-76.
451. Wallace, W. G. III (1992). "Practical application of charge analysis in papermaking," TAPPI Papermakers Conf., TAPPI Press, Altanta, 445-456.
452. Wang, F., and Hubbe, M. A. (2001). "Development and evaluation of an automated streaming potential measurement device," Colloids and Surfaces A 194, 221-232 (2001).
453. Wang, F., and Hubbe, M. A. (2002). "Charge properties of fibers in the paper mill environment. 1. Effect of electrical conductivity," J. Pulp Paper Science 28(10), 347-353.
454. Wang, H. Z., Qian, C., and Roman, M. (2011). "Effects of pH and salt concentration on the formation and properties of chitosan-cellulose nanocrystal polyelectrolyte-macroion complexes," Biomacromol. 12(10), 3708-3714.
455. Webster, L., and Huglin, M. B. (1997). "Observations on complex formation between polyelectrolytes in dilute aqueous solution," Eur. Polymer J. 33(7), 1173-1177.
456. Webster, L., Huglin, M. B., and Robb, I. D. (1997). "Complex formation between polyelectrolytes in dilute aqueous solution," Polymer 38(6), 1373-1380.
457. Wen, Q., and Pelton, R. (2012a). "Microgel adhesives for wet cellulose: Measurements and modeling," Langmuir 28, 5450-5457.
458. Wen, Q., and Pelton, R. (2012b). "Design rules for microgel-supported adhesives," Indust. Eng. Chem. Res. 51, 9564-9570.
459. Wen, Q., Vincelli, A. M., and Pelton, R. (2012). "Cationic polyvinylamine binding to anionic microgels yields kinetically controlled structures," J. Colloid Interface Sci. 369, 223-230.
460. Willför, S., Pranovich, A., Tamminen, T., Puls, J., Laine, C., Suurnäkki, A., Saake, B., Uotila, K., Simolin, H., Hemming, J., and Holmbom, B., (2009). "Carbohydrate analysis of plant materials with uronic acid-containing polysaccharides-A comparison between different hydrolysis and subsequent chromatographic analytical techniques," Industrial Crops and Products 29(2-3), 571-580.
461. Willför, S., Sjöholm, R., Laine, C., and Holmbom, B. (2002). "Structural features of water-soluble arabinogalactans from Norway spruce and Scots pine heartwood," Wood Sci. Technol. 36(2), 101-110.
462. Willis, J. M., Yean, W. Q., and Goring, D. A. I. (1987). "Molecular weights of lignosulfonate and carbohydrate leached from sulfite chemimechanical pulp," J. Wood Chem. Technol. 7(2), 259-268.
463. Wu, N., Hubbe, M. A., Rojas, O. J., and Park, S. (2009). "Permeation of polyelectrolytes and other solutes into the pore spaces of water-swollen cellulose: A review," BioResources 4(3), 1222-1262.
464. Xu, E. C. (2001). "P-RC alkaline peroxide mechanical pulping of hardwood, Part 1: Aspen, beach, birch, cottonwood and maple-Birch gives the highest strength properties," Pulp&Paper-Canada 102(2), 44-47.
465. Xu, E. C., and Zhou, Y. (2007). "Synergistic effects between chemical mechanical pulps and chemical pulps from hardwoods," TAPPI J. 6(11), 4-9.
466. TH ISETPP), Sun, R. C., and Fu, S.Y. (eds.), 933-936.
467. Yokota, S., Matsuo, K., Kitaoka, T., and Wariishi, H. (2008). "Specific interaction acting at a cellulose-binding domain/cellulose interface for papermaking application," BioResources 3(4), 1030-1041.
468. Yuan, T. Q, He, J., Xu, F., and Sun, R. C. (2009). "Fractionation and physico-chemical analysis of degraded lignins from the black liquor of Eucalyptus pellita KP-AQ pulping," Polymer Degrad. Stability 94(7), 1142-1150.
469. Zhang, C. H., Zhan, H. Y., Fu, S. Y., and Li, B. Y. (2008). "Enzymatic control of detrimental substances in process waters from newsprint mills," Proc. Intl. Conf. Pulping, Papermaking and Biotechnology 2008: ICPPB '08, Vol. 2, 453-457.
470. TH ISETPP), Sun, R. C., and Fu, S. Y., (eds.), SCUT, Guangzhou, China, 961-964.
471. Zhang, H. J., He, Z. B., Ni, Y. H., Hu, H. R., and Zhou, Y. J. (2007). "Characteristics of dissolved and colloidal substances in high yield pulp and their impact on filler retention," APPITA J. 60(5), 390-395.
472. Zhang, H. J., Hu, H. R., He, Z. B., and Ni, Y. H. (2009). "Highly substituted cationic starch as an anionic trash catcher for high-yield pulp," TAPPI J. 8(7), 31-36.
473. Zhang, X. (2000). "The effects of white-water dissolved and colloidal fractions on paper properties and effects of various enzyme treatments on the removal of organic components-Laccase treatment results in the degradation of most extractives," Pulp Paper Can. 101(3), 59-62.
474. Zhang, X., Renaud, S., and Paice, M. (2005). "The potential of laccase to remove extractives present in pulp and white water from TMP newsprint mills," J. Pulp Paper Sci. 31(4), 175-180.
475. Zhang, X., Stebbing, D. W., Soong, G., Saddler, J. N., and Beatson, R. P. (2002). "A combined fungal and enzyme treatment system to remove TMP/newsprint mill white water substances," TAPPI J. 1(3), 26-32.
476. Zhang, Y. J., Sjogren, B., Engstrand, P., and Htun, M. (1994). "Determination of charged groups in mechanical pulp fibers and their influence on pulp properties," J. Wood Chem. Technol. 14(1), 83-102.
477. Zhao, G. L., He, B. H., Qian, L. Y., Wang, X. M., and Liu, H. B. (2002). "Feasibility of estimation on machine wet-end by using water quality parameters in newsprint mill," Emerging Technols. Pulping Papermaking, Liu, H. B., Zhan, H. Y., and Xie, Y. I. (eds.), 644-650.
478. Zheng, X. L., and Cao, W. X. (2001). "Interactions of main-chain polycationic with sodium dodecyl sulfate," Polymer Intl. 50(4), 484-486.