Continuous filtration and titration apparatus for real time monitoring of polyelectrolyte concentration and cationic demand of a paper furnish

Nordic Pulp and Paper Research Journal

Volumn 18, Issue 1, 2003, Pages 95-107

  Rice, Matthew ^a,b   Roeraade, Johan ^a  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

^b Eka Chemicals AB   (Sweden)

Author keywords

Cationic demand; Chemical monitoring; Colloidal titration; Colorimetry; Cross flow filtration; Dissolved and colloidal components; On line system; Pitch problems; Polyelectrolyte titration; Toluidine blue; Zeta potential

Indexed keywords

BLEACHING; FILTRATION; KRAFT PULP; PAPERMAKING; PH EFFECTS; POSITIVE IONS; TITRATION;

CATIONIC DEMAND;

POLYELECTROLYTES;

BLEACHING; CATIONS; EQUIPMENT; FILTRATION; FURNISH; PAPER; POLYELECTROLYTES; VOLUMETRY;

EID: 0038004018     PISSN: 02832631     EISSN: None     Source Type: Journal    
DOI: 10.3183/npprj-2003-18-01-p095-107     Document Type: Article

References (71)

1. Anon (1995): Advances in sensor and control technologies, Pulp Pap. Internl., Editorial Suppliment:S11.
2. Back, E. (1960): The mechanism of pulp resin accumulation at solid surfaces, Svensk Papperstidn. 63:17, 556.
3. Barron, W., Murray, B.S., Scales, P.J., Healy, T.W., Dixon, D.R. and Pascoe, M. (1994): The streaming current detector: a comparison with conventional electrokinetic techniques, Colloids Surf. A, 88:2-3, 129.
4. Bley, L. (1992): Measuring the concentration of anionic trash - the PCD, Pap. Tech., 33:4, 32.
5. Bley, L. and Bischof, P. (1995): Practical experiences with on-line charge titration in paper mills, 1995 Papermakers Conference, Chicago, IL, 445.
6. Bley, L. and Winter, E. (1997): On-line charge monitoring - a wet-end strategy, 1997 Engineering & Papermakers Conference, Nashville, TN, 297.
7. Carrasco, F., Mutje, P. and Pelach, M.A. (1998a): Control of retention in paper-making by colloid titration and zeta potential techniques, Wood Sci. Technol., 32:2, 145.
8. Carrasco, F., Mutjé, P. and Pelach, M.A. (1998b): Control of retention in paper-making by colloid titration and zeta potential techniques, Wood Sci. Technol., 32:2, 145.
9. Cesek, B. and Milichovsky, M. (1996): Releasing of soluble and colloidal substances in pulp slurries, Cellulose Chem. Technol., 30, 297.
10. Conyngham, M. and Assad, R. (1995): Coordinated chemical dosing and charge monitoring for treating water systems, Pap. Southern Africa, 15:5, 14.
11. Crill, M. (1991): Fiber charge analyzers monitor furnish to optimize production, Pulp Paper, 65:11, 92.
12. Denbrok, C.A. and Peacock, B. (1999): Wet-end charge measurement using streaming current online titrators, Tappi J., 82:10, 57.
13. Denoyel, R., Durand, G., Lafuma, F. and Audbert, R. (1990): Adsorption of cationic polyelectrolytes onto montmorillonite and silica: microcalotimetric study of their conformation, J. Colloid Interface Sci., 139:1, 281.
14. Dexter, R.J. (1996): Industry's efforts at effluent closure must focus on competitive innovation, Pulp Paper, 70:2, 55.
15. Doren, A., Lemaitre, J. and Rouxhet, P.G. (1989): Determination of the zeta potential of macroscopic specimens using microelectrophoresis, J. Colloid Interface. Sci., 130:1, 146.
16. Farley, C.A. (1992): Microelectrophoresis as a wet end teaching tool, Proceedings of the 1992 TAPPI Papermakers Conference, Nashville, TN, 509.
17. Ferguson, K. (1994): "Process technology developments", New trends and developments in papermaking, Miller Freeman, San Francisco, CA.
18. Galetti, B.J. (1969): Application of the streaming current detector to the continuous measurement and control of colloidal systems, Anal. Instrum, 7, 247.
19. Gerdes, W.F. (1966a): New Instrument, the streaming current detector, Anal. Instrum., 4, 181.
20. Gerdas, W.F. (1966b): Streaming current detector measures colloid stability, ISA J., 13:12, 38.
21. Gratton, R. and Pruszynski, P. (1994): Cationic demand survey of papermachines: How can we measure it and use it?, 80th Annual Meeting, Technical Section, Canadian Pulp & Paper Association, Montréal, Québec, B79.
22. Guest, D. (1996): On-line sensors stimulate chemical suppliers, Pulp Pap. Internl., 38:1, 48.
23. Hand, V., Koethe, J., Kuchibhotla, S. and Scott, W. (1993): An Evaluation of two pad-forming paper stock charge analyzers, Proceedings of the 1993 TAPPI Papermakers Conference, Atlanta, GA, 591.
24. Hendrickson, E.R. and Neuman, R.D. (1986): Polyacrylamide adsorption from very dilute solutions, J. Colloid Interface Sci., 110:1, 242.
25. Kaunonen, A. (1998): Studies on on-line retention and cationic demand measurement and their utilization on a paper machine (Doctoral discertation) Tampere University of Technology, Tampere, Finland.
26. Kawamura, S. and Hanna, G.P. (1967): Application of colloidal titration technique to flocculation control, J. Am. Water Works Assoc., 59:8, 1003.
27. King, C.A. (1992): Charge and paper machine application, Proceedings of the 1992 TAPPI Papermakers Conference, Nashville, TN, 507.
28. Kortelainen, H. (1992): Tools for successful wet-end chemistry control, Tappi J., 75:12, 112.
29. Laine, J., Buchert, J., Viikari, L. and Stenius, P. (1996): Characterization of unbleached kraft pulps by enzymatic treatment, potentiometric titration and polyelectrolyte adsorption, Holzforschung, 50:3, 208.
30. Lindström, T. and Soremark, C. (1976): Adsorption of cationic polyacrylamides on cellulose, J. Colloid Interface Sci., 55:2, 305.
31. Lindström, T. and Wågberg, L. (1983): Effects of pH and electrolyte concentration on the adsorption of cationic polyacrylamides on cellulose, Tappi J., 66:6, 83.
32. Miyanishi, T. (1994): On-line zeta potential analysis of a fine paper machine and a newsprint machine, Proceedings of the 1994 TAPPI Papermakers Conference, San Francisco, CA, 313.
33. Ojala, T. (1993): Charge measurement of different furnishes using polyelectrolyte titration with a streaming current detector, Proceedings of the 1993 TAPPI Papermakers Conference, Atlanta, GA, 613.
34. Onabe, F. (1978): Studies on interfacial properties of polyelectrolyte-cellulose systems. I. Formation and structure of adsorbed layers of cationic polylectrolyte (poly-DMDAAC) on cellulose fibers, J. Appl. Polym. Sci., 22:12, 3495.
35. Patten, P. and Lee, D.T. (1993b): Charge analysis: powerful tools in wet end optimization, Tappi J., 76:8, 107.
36. Patten, P. and Lee, D.T. (1993a): Charge analysis: powerful tools in wet end optimization, Proceedings of the 1993 TAPPI Papermakers Conference, Atlanta, GA, 555.
37. Patten, P.A. and Hibble, B.J. (1992): Understanding and optimizing wet end chemistry through particle charge characterization, Proceedings of the 1992 TAPPI Papermakers Conference, Nashville, TN, 5.
38. Penniman, J.G. (1994): On-line monitoring of microparticulate papermaking process chemistry, Proceedings of the 1994 TAPPI Papermakers Conference, San Francisco, CA, 229.
39. Phipps, J.S. (1999): Some mechanistic insights for using the streaming current detector to measure wet-end charge, Tappi J. 82:8, 157.
40. Rice, M. (2001): New techniques for continuous chemical analysis in the pulp and paper industry (Doctoral discertation) Department of Chemistry, Division of Analytical Chemistry, Royal Institute of Technology, Stockholm, Sweden.
41. Rice, M., Roeraade, J. and Holmbom, B. (1999): High-shear turbulent flow filtration for chemical monitoring of pulp and paper process waters, Nordic Pulp Pap. Res. J., 14:4, 292.
42. Rouger, J. and Mutje, P. (1984): Correlation between cellulosic fibres beating and the fixation of soluble cationic polymer, Brit. Poly. J., 16:2, 83.
43. Sanders, N.D. and Schaefer, J.H. (1995): Comparing papermaking wet-end charge-measuring techniques in kraft and ground-wood systems, Tappi J., 78:11, 142.
44. Scott, W.E. (1984): A review of wet-end chemistry process control instrumentation, Tappi J., 67:11, 72.
45. Scott, W.E. (1996): Principles of wet end chemistry, 2nd ed., Tappi Press, Atlanta, GA.
46. Shapiro, S.I. and Shearin, R.H. (1995): On-line sensors: exploring the trends, Tappi J., 78:9, 83.
47. Sihvonen, A., Sundberg, K., Sundberg, A. and Holmbom, B. (1998): Stability and deposition tendency of colloidal wood resin, Nordic Pulp Pap. Res. J., 13:1, 64.
48. Simpson, J. (1992): A window onto the wet-end - the fibre charge analyser, Paper Technol., 33:6, 26.
49. Sjödin, U. and Ödberg, L. (1995): The influence of metal ions on polyelectrolyte titration, Colloids Surf., 116:3, 269.
50. Sjöström, E. (1981): Wood Chemistry, fundamentals and applications, Academic Press, Inc., London.
51. Sopenlehto, T. (1995): On-line monitoring and control in the wet-end, in "Applications of wet-end paper chemistry", Chapman & Hall, London.
52. Spence, G.G. (1997): A titration procedure for determining the level of anionic impurities in a pulp furnish, Paper Age, 113:7, 30.
53. StJohn, M.R. and Gallagher, T.M. (1992): Evaluation of the charge state of papermachine systems using the charge titration method, Proceedings of the 1992 TAPPI Papermakers Conference, Nashville, TN, 479.
54. Strazdins, E. (1992): Microelectrophoresis theory and praxis, Proceedings of the 1992 TAPPI Papermakers Conference, Nashville, TN, 503.
55. Tanaka, H. and Sakamoto, Y. (1993a): Polyelectrolyte titration using fluorescent indicator. I. Direct titration of anionic and cationic polyelectrolytes with 10∧-4N standard solutions., J. Polym. Sci. Part A: Polym. Chem. 31:11, 2697.
56. Tanaka, H. and Sakamoto, Y. (1993b): Polyelectrolyte titration using fluorescent indicator. II. Analysis of cationic starches and flocculents, J. Polym. Sci. Part A: Polym. Chem. 31:11, 2693.
57. Tanaka, H., Tachiki, K. and Sumimoto, M. (1979): Adsorption of cationic polymers onto bleached kraft pulp, Tappi, 62:1, 41.
58. Terayama, H. (1952): Method of colloid titration (a new titration between polymer ions), J. Polym. Sci., 8:2, 243.
59. Thomas, S. and Latva, M. (1999): The robotic laboratory - a wet end information centre. Paper Tech., Sept., 57.
60. Toei, K. and Kohara, T. (1976): A conductometric method for colloid titrations, Anal. Chim. Acta, 83:1, 59.
61. Toei, K. and Sawada, M. (1976): A turbidimetric method for colloid titrations, Anal. Chim. Acta, 89:2, 383.
62. Ueno, K. and Kina, K. (1985): Colloid titration - A rapid method for the determination of charged colloid, J. Chem. Educ., 62:7, 627.
63. Veal, C.R. (1997): On-line cationic demand measurement for wet end papermaking, 1997 Engineering & Papermakers Conference, Nashville, TN, 287.
64. Wågberg, L. and Ödberg, L. (1989): Polymer adsorption on cellulosic fibers, Nordic Pulp Pap. Res. J., 4:2, 135.
65. Wågberg, L. and Ödberg, L. (1998): Short introduction to the art of polyelectolyte titration, (Internal report A 982), STFI, Stockholm, Sweden.
66. Wågberg, L., Ödberg, L. and Glad-Nordmark, G. (1989): Charge determination of porous substrates by polyelectrolyte adsorption Part 1. Carboxymethylated, bleached cellulosic fibers, Nordic Pulp Pap. Res. J., 4:2, 71.
67. Wågberg, L., Ödberg, L., Lindström, T. and Aksberg, R. (1988): Kinetics of adsorption and ion-exchange reactions during adsorption of cationic polyelectrolytes onto cellulosic fibers, J. Colloid. Interface Sci., 123:1, 287.
68. Wågberg, L., Winter, L., Ödberg, L. and Lindström, T. (1987): On the charge stoichiometry upon adsorption of a cationic polyelectrolyte on cellulosic materials, Colloids Surf. 27:1-3, 163.
69. Walker, C.A., Kirby, J.T. and Dentel, S.K. (1996): The streaming current detector: A quantitative model, J. Colloid Interface Sci., 182:1, 71.
70. Wallace, W.G. (1992): Practical applications of charge analysis in papermaking, Proceedings of the 1992 TAPPI Papermakers Conference, Nashville, TN, 445.
71. Winter, L., Wågberg, L., Ödberg, L. and Lindström, T. (1986): Polyelectrolytes adsorbed on the surface of cellulosic materials, J. Colloid Interface Sci., 111:2, 537.