Colloidal stability and aggregation of Lignocellulosic materials in aqueous suspension: A review

BioResources

Volumn 3, Issue 4, 2008, Pages 1419-1491

  Hubbe, Martin A ^a   Rojas, Orlando J ^a  

^a NORTH CAROLINA STATE UNIVERSITY   (United States)

Author keywords

Cellulose; Coagulation; Colloidal stability; Dispersions; Electrolyte concentration; Extractives; Flocculation; Hemicellulose; Lignin; Lignocellulose; Polyelectrolytes; Suspensions; Zeta potential

Indexed keywords

AQUEOUS CONDITION; AQUEOUS DISPERSIONS; AQUEOUS SUSPENSIONS; CHARGED SURFACES; COLLOIDAL STABILITY; DISPERSION STABILITY; ELECTROLYTE CONCENTRATION; ELECTROSTATIC DOUBLE LAYER; EXTRACTIVES; HEMICELLULOSE; LIGNO-CELLULOSICS; LIGNOCELLULOSIC MATERIAL; OSMOTIC PRESSURE; PARTICLE DISPERSION; SALT IONS; SUPPORTING ELECTROLYTE; WELL-DISPERSED;

CELLULOSE; COAGULATION; FLOCCULATION; LIGNIN; NANORODS; POLYELECTROLYTES; STABILITY; SURFACE ACTIVE AGENTS; SURFACE PROPERTIES; ZETA POTENTIAL;

SUSPENSIONS (FLUIDS);

CELLULOSE; COAGULATION; DISPERSIONS; ELECTROLYTES; EXTRACTIVES; FIBERS; FLOCCULATION; HEMICELLULOSES; LIGNINS; LIGNOCELLULOSE; PAPER MAKING; POLYELECTROLYTES; SURFACE PROPERTIES; SURFACTANTS; ZETA POTENTIAL;

EID: 77950545777     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Review

References (472)

1. Ahola, S., Salmi, J., Johansson, L. S., Laine, J., and Österberg, M. (2008a). "Model films from native cellulose nanofibrils. Preparation, swelling, and surface interactions," Biomacromolecules 9(4), 1273-1282.
2. Ahola, S., Myllytie, P., Österberg, M., Teerinen, T., and Laine, J. (2008b). "Effect of polymer adsorption on cellulose nanofibril water binding capacity and aggregation," BioResources 3(4), 1315-1328.
3. Ahrens, F., Alaimo, N., Nanko, H., and Patterson, T. (1999). "Initial development of an improved water retention value test and its application to the investigation of water removal potential," TAPPI 1999 Proc., 37.
4. Alfano, J. C., Carter, P. W., Dunham, A. J., Nowak, M. J., and Tubergen, K. R. (2000). "Polyelectrolyte-induced aggregation of microcrystalline cellulose: Reversibility and shear effects," J. Colloid Interface Sci. 223(2), 244-254.
5. Alila, S., Aloulou, F., Beneventi, D., and Boufi, S. (2007). "Self-aggregation of cationic surfactants onto oxidized cellulose fibers and coadsorption of organic compounds," Langmuir 23(7), 3723-3731.
6. Alila, S., Boufi, S., Belgacem, M. N., and Beneventi, D. (2005). "Adsorption of a cationic surfactant onto cellulosic fibers - I. Surface charge effects," Langmuir 21(18), 8106-8113.
7. Alince, B. (1975). "Development of paper tensile strength by periodate oxidation," Svensk Papperstidning 78(7), 253-257.
8. Alince, B. (2002). "Porosity of swollen pulp fibers revisited," Nordic Pulp Paper Res. J. 17(1), 71-73.
9. Alince, B., Petlicki, J., and van de Ven, T. G. M. (1991). "Kinetics of colloidal particle deposition on pulp fibers. 1. Deposition of clay on fibers of opposite charge," Colloids Surf. 59, 265-277.
10. Alince, B., and van de Ven, T. G. M. (1993). "Kinetics of colloidal particle depsoition on pulp fibers. 2. Deposition of clay on fibers in the presence of poly(ethyleneimine)," Colloids Surf. A 71(1), 105-114.
11. Alince, B., and Robertson, A. A. (1974). "Aggregation of microcrystalline cellulose with polyethylenimine," Colloid Polymer Sci. 252(11), 920-927.
12. Alince, B., and van de Ven, T. G. M. (1997). "Porosity of swollen pulp fibers evaluated by polymer adsorption," in C. F. Baker, ed., The Fundamentals of Papermaking Materials, Pira Intl., Leatherhead, Surrey, UK, 771-788.
13. Allan, G. G., and Reif, W. M. (1971). "Fiber surface modification - Stereochemistry of ionic bonding in paper," Svensk Papperstidning 74(18), 563-570.
14. Allen, L. H., and Yaraskavitch, I. M. (1991). "Effects of retention and drainage aids on paper machine drainage: A review," Tappi J. 74 (7), 79-84.
15. Amelina, E. A., Shchukin, E. D., Parfenova, A. M., Pelekh, V. V., Vidensky, I. V., Bessonov, A. I., Aranovich, G., and Donohue, M. (2000). "Effect of cationic polyelectrolyte and surfactant on cohesion and friction in contacts between cellulose fibers," Colloids Surf. A 167(3), 215-227.
16. Andersson, K., and Lindgren, E. (1996). "Important properties of colloidal silica in microparticulate systems," Nordic Pulp Paper Res. J. 11(1), 15-21, 57.
17. Andreasson, B., Forsström, J., and Wågberg, L. (2003). "The porous structure of pulp fibers with different yields and its influence on paper strength," Cellulose 10, 111-123.
18. Andresen, M., and Stenius, P. (2007). "Water-in-oil emulsions stabilized by hydrophobized microfibrillated cellulose," J. Dispersion Sci. Technol. 28(6), 837-844.
19. Anon. (1981). "Water retention value," TAPPI Useful Method UM 256.
20. Arnson, T. R., and Stratton, R. A. (1983). "The adsorption of complex aluminum species by cellulosic fibers," Tappi J. 66(12), 72-75.
21. Athley, K., Ulmgren, P., and Ohman, L. O. (2001). "Acid-base properties of oxygendelignified kraft pulps," Nordic Pulp Paper Res. J. 16(3), 195-203.
22. Back, E. L., and Allen, L. H. (2000). Pitch Control, Wood Resin and Deresination, TAPPI Press, Atlanta, 392 pp.
23. Back, E. L., and Salmén, N. L. (1982). "Glass transition of wood components hold implications for molding and pulping processes," Tappi 65(7), 107-110.
24. Baker, C. F. (1995). "Good practice for refining the types of fiber found in modern paper furnishes," Tappi J. 78(2), 147-153.
25. Baltazar-Y-Jimenez, A., and Bismarck, A. (2007). "Wetting behaviour, moisture up-take and electrokinetic properties of lignocellulosic fibres," Cellulose 14(2), 115-127.
26. Baltazar-Y-Jimenez, A., Bistritz, M., Schulz, E., and Bismarck, A. (2008). "Atmospheric air pressure plasma treatment of lignocellulosic fibres: Impact on mechanical properties," Composites Sci. Technol. 68(1), 215-227.
27. Barzyk, D., Page, D. H., and Ragauskas, A. (1997). "Acidic group topochemistry and fiber-to-fiber specific bond strength," J. Pulp Paper Sci. 23(2), J59-J61.
28. Bastidas, J. C., Pawlak, J. J., Venditti, R. A., Heitmann, J. A., Hubbe, M. A., and Kadla, J. F. (2008). "A colloidal probe microscopy study of cellulose/gypsum interactions," Materials Characterization 59(2), 144-150.
29. Baumgartner, H., and Bley, L. (1994). "Practical experiences with online charge titration on a paper machine," Wochbl. Papierfabr. 122(22), 894-898.
30. Baur, R., Macholdt, H. T., and Michel, E. (1999). "Streaming current charge versus tribo charge," Electrostatics 1999, Inst. Phys. Conf. Ser. 163, 285-288.
31. Beck, U., Müller, F., Rohloff, E., and Tretter, H. (1987). "Ladungsmessungen in Papierstoff-Systemen - Methoden und Möglichkeiten," Papier 41(10A), V44-V51.
32. Beck-Candanedo, S., Roman, M., and Gray, D. G. (2005). "Effect of reaction conditions on the properties and behavior of wood cellulose nanocrystal suspensions," Biomacromolecules 6(2), 1048-1054.
33. Bednar, F., Perin-Levasseur, Z., van de Ven, T. G. M., and Paris, J. (2004). "Polyethylene oxide disentanglement," J. Pulp Paper Sci. 30(2), 49-52.
34. Beghello, L., and Lindström, T. (1998). "The influence of carboxymethylation on the fiber flocculation process," Nordic Pulp Paper Res. J. 13(4), 269-273.
35. Bellissent-Funel, M.-C. (2002). "Water near hydrophilic surfaces," J. Molecular Liquids 96-97, 287-304.
36. Bennington, C. P. J., Kerekes, R. J., and Grace, J. R. (1990). "The yield stress of fiber suspensions," Can. J. Chem. Eng. 68, 746-757.
37. Bergenstrahle, M., Wohlert, J., Larsson, P. T., Mazeau, K., and Berglund, L. A. (2008). "Dynamics of cellulose-water interfaces: NMR spin-lattice relaxation times calculated from atomistic computer simulations," J. Phys. Chem. B 112(9), 2590-2595.
38. Bergström, L., Stemme, S., Dahlfors, T., Arwin, H., and Ödberg, L. (1999). "Spectroscopic ellipsometry characterization and estimation of the Hamaker constant of cellulose," Cellulose 6, 1-13.
39. Berthold, J., and Salmén, L. (1997). "Effects of mechanical and chemical treatments on the pore-size distribution in wood pulps examined by inverse size-exclusion chromatography (ISEC)," J. Pulp Paper Sci. 23(6), J245-253.
40. Bhardwaj, N. K., Kumar, S., and Bajpai, P. K. (2005). "Effect of zeta potential on retention and drainage of secondary fibers," Colloids Surf. A. 260(1-3), 245-250.
41. 13 model," Coordination Chem. Rev. 248, 441-455.
42. Biefer, G. J., and Mason, S. G. (1954). "Electroosmosis and streaming in natural and synthetic fibers," J. Colloid Sci. 9, 20-35.
43. Biermann, O., Hadicke, E., Koltzenburg, S., and Muller-Plathe, F. (2001). "Hydrophilicity and lipophilicity of cellulose crystal surfaces," Angew. Chemie-Intl. Ed. 40(20), 3822-3825.
44. Bischof, P., "Relationship of zeta-potential and particle charge detection in colloidal system relating to paper manufacturing," Proc. TAPPI 1997 Nonwovens Conf., 115.
45. Biswas, S. C., and Chattoraj, D. K. (1997). "Polysaccharide-surfactant interaction. 1. Adsorption of cationic surfactants at the cellulose-water interface," Langmuir 13(17), 4505-4511.
46. Bleier, A., and Matijević, E. (1976). "Heterocoagulation. I. Interactions of monodispersed chromium hydroxide with polyvinyl chloride latex," J. Colloid Interface Sci. 55(3), 510-524.
47. Bletzinger, J. C. (1943). "Effect of acetylation on water-binding properties of cellulose," Ind. Eng. Chem. 35(4), 474-480.
48. Bley, L. (1992). "Measuring the concentration of anionic trash - the PCD," Paper Technol. 33(4), 32-37.
49. Bley, L., and Kästner, M., "On-line process charge control in papermaking," in The Chemistry of Papermaking, Proc. PIRA Conf. ̧ Jan. 28-29, 1992, paper 17.
50. Bloom, F., and Heindel, T. (1997). "Theoretical model of flotation deinking efficiency," J. Colloid Interface Sci. 190(1), 182-197.
51. Bobacka, V., Näsman, J., and Eklund, D. (1998). "Interactions between cationic starch and anionic trash of a peroxide-bleached TMP at different salt concentrations," J. Pulp Paper Sci. 24(3), 78-81.
52. Bondeson, D., Mathew, A., and Oksman, K. (2006). "Optimization of the isolation of nanocrystals from microcrystalline cellulose by acid hydrolysis," Cellulose 13(2), 171-180.
53. Bordel, D., Putaux, J. L., and Heux, L. (2006). "Orientation of native cellulose in an
54. Bottéro, J.-Y., and Fiessinger, F. (1989). "Aluminum chemistry in aqueous solution," Nordic Pulp Paper Res. J. 4(2), 81-89.
55. Bottéro, J. Y., Poirier, J. E., and Fiessinger, F. (1980). "Study of partially neutralized aqueous aluminum chloride solutions: Identification of aluminum species and relation between the composition of the solutions and their efficiency as a coagulant," Prog. Water Tech. 13(1), 601-612.
56. Bowen, W. R., and Jenner, F. (1995). "The calculation of dispersion forces for engineering applications," Adv. Colloid Interface Sci. 56, 201-243.
57. Brace, R., and Matijević, E. (1973). "Aluminum hydrous oxide sols. I. Spherical particles of narrow size distribution," J. Inorg. Nucl. Chem. 35, 3691-3705.
58. Briggs, D. R. (1928). "The determination of the zeta potential on cellulose - A Method," J. Phys. Chem. 33(5), 641-675.
59. Britt, K. W. (1973). "Mechanisms of retention during paper formation," Tappi 56(10), 46-50.
60. Britt, K. W., and Unbehend, J. E. (1974). "Electrophoresis in paper stock suspensions as measured by mass transport analysis," Tappi 57(12), 81-84.
61. Buchhammer, H.-M., Petzold, G., and Lunkwitz, K. (1993). "The interaction between oppositely charge polyelectrolytes in the presence of solid surfaces," Colloids Surf. A 76, 81-85.
62. Buchhammer, H.-M., Kramer, G., and Lunkwitz, K. (1994). "Interaction of colloidal dispersions of non-stoichiometric polyelectrolyte complexes and silica particles," Colloids Surf. A 95, 299-304.
63. Budd, J., and Herrington, T. M. (1989). "Surface charge and surface area of cellulose fibers," Colloids Surf. 36(3), 273-288.
64. Bygrave, G., and Englezos, P. (1998). "Fiber charge from potentiometric titration of kraft pulp and Donnan equilibrium theory," Nordic Pulp Paper Res. J. 13(3), 220-224.
65. Carambassis, A., and Rutland, M. W. (1999). "Interactions between cellulose surfaces: Effect of electrolyte," Langmuir 9, 5584-5590.
66. Carr, M. E., Hamerstrand, G. E., Hofreiter, B. T., and Russell, C. R. (1977). "A polysalt complex for wet-end addition," Tappi 60(12), 148-149.
67. Carrasco, F., Mutje, P., and Pelach, M. A. (1996). "Refining of bleached cellulosic pulps: Characterization by application of the colloidal titration technique," Wood Sci. Technol. 30(4), 227-236.
68. Cathala, B., Saake, B., Faix, O., and Monties, B. (2003). "Association behaviour of lignins and lignin model compounds studied by multidetector size-exclusion chromatography," J. Chromatography A 1020(2), 229-239.
69. Chan, D., Perram, J., White, L., and Healy, T. W. (1976). "Regulation of surface potential at amphoteric surfaces during particle-particle interactions," J. Chem. Soc., Faraday Trans. I 71(5), 1046-1057.
70. Chang, M. Y., and Robertson, A. A. (1967a). "Flocculation studies of fiber suspensions: Influence of zeta potential," Pulp Paper Mag. Can. 68(9), T438-T444.
71. Chang, M. Y. and Robertson, A. A. (1967b). "Zeta potential measurements of fibers. DC streaming current method," Can. J. Chem. Eng. 45(2), 66-71.
72. Chen, J., Hubbe, M. A., and Heitmann, J. A. (2001). "Measurement of colloidal charge in the paper mill by streaming current," TAPPI 2001 Papermakers Conf., electronic document, TAPPI Press, Atlanta.
73. Chen, S.-L., Wang, S., and Lucia, L. A. (2004). "New insights into the fundamental nature of lignocellulosic fiber surface charge," J. Colloid Interface Sci. 275(2), 392-397.
74. Claesson, P. M., Dedinaite, A., and Rojas, O. J. (2003). "Polyelectrolytes as adhesion modifiers," Advances in Colloid and Interface Science 104, 53-74.
75. Claesson, P. M., Poptoshev, E., Blomberg, E., and Dedinaite, A. (2005). "Polyelectrolytemediated surface interactions," Adv. Colloid Interface Sci. 114, 173-187.
76. Claesson, P. M., and Rutland, M. W. (2001). "Measuring interactions between surfaces," in Holmberg, K. (ed.), Handbook of Applied Surface and Colloid Chem., Wiley, New York, Ch. 20, 383-414.
77. nd Ed., Miller Freeman, San Francisco, Ch. 8, pp. 160-180.
78. Dahlgren, M. A. G., and Leermakers, F. A. M. (1995). "Depletion zones in polyelectrolyte systems - polydispersity effects and colloidal stability," Langmuir 11(8), 2996-3006.
79. Danovich, T. A., and Hsieh, Y.-L. (2007). "Surface modification of cellulose with plant triglycerides for hydrophobicity," Cellulose 14, 469-480.
80. Das, B. S., and Lomas, H. (1973). "Flocculation of paper fines. I. Adsorption of and flocculation by polyelectrolytes. II. Study of the nature of the solid surface and soluble impurities," Pulp Paper Mag. Can. 74(8), 95-100.
81. Davison, R. W., and Cates, R. E. (1975). "Electrokinetic effects in papermaking systems: Theory and practice," Paper Technol. Ind. 16(2), 107-114.
82. de Gennes, P. G. (1987). "Polymers at an interface; A simplified view," Advances in Colloid and Interface Science 27(3-4), 189-209.
83. Deodhar, S., and Luner, P. (1980). "Measurement of bound (nonfreezing) water by differential scanning calorimetry," ACS Symp. Ser. 127, Water in Polymers, S. P. Rowland (ed.), Ch. 16, 273-286.
84. Derjaguin, B. V., and Landau, L. D. (1941). "Theory of the stability of strongly charged lyophobic sols and the adhesion of strongly charged particles in solution of electrolytes," Acta Pysicochim. URSS 14, 633-662.
85. de Souza Lima, M. M. D., and Borsali, R. (2002). "Static and dynamic light scattering from polyelectrolyte microcrystal cellulose," Langmuir 18(4), 992-996.
86. Dong, D., Fricke, A. L., Moudgil, B. M., and Johnson, H. (1996). "Electrokinetic study of kraft lignin," Tappi J. 79(7), 191-197.
87. Donnan, M. B., Healy, T. W., and Nelson, P. F. (1981). "An electrokinetic study of alum coagulation and polymer flocculantion of cellulose pulp fines," Colloids Surf. 2(2), 133-143.
88. Duchesne, I., Daniel, G., Van Leerdam, G. C., and Basta, J. (2003). "Surface chemical composition and morphology of ITC kraft fibers as determined by XPS and FESEM," J. Pulp Paper Sci. 29(3), 71-76.
89. Dugal, H. S., and Swanson, J. W. (1972). "Effect of polymer mannan content on the effectiveness of modified guar gum as a beater adhesive," Tappi 55(9), 1362-1367.
90. Dzyaloshinskii, I. E., Lifshitz, E. M., and Pitaevskii, L. P. (1961). "The general theory of van der Waals forces," Advances in Physics 10(38), 165-209.
91. Edgar, C. D., and Gray, D. G. (2003). "Smooth model cellulose I surfaces from nanocrystal suspensions," Cellulose 10, 299-309.
92. Ehrnrooth, E., Htun, M., and de Ruvo, A. (1977). "Esterification as a means of improving the properties of once-dried fibers," Trans. Symp. Fiber-Water Interactions in Papermaking, Oxford, British Paper and Board Industry Federation, 899-915.
93. Eisenlauer, J., Horn, D., Linhart, F., and Hemel, R. (1987). "Fiber-optic flocculation sensor for on-line control of retention and drainage aids efficiency," Nordic Pulp Paper Res. J. 4(4), 132-138.
94. Eriksson, M., Notley, S. M., and Wågberg, L. (2005a). "The influence on paper strength properties when building multilayers of weak polyelectrolytes onto wood fibers," J. Colloid Interface Sci. 292(1), 38-45.
95. Eriksson, M., Pettersson, G., and Wågberg, L. (2005b). "Application of polymeric multilayers of starch onto wood fibers to enhance strength properties of paper," Nordic Pulp Paper Res. J. 20(3), 270-276.
96. Espinosa-Jimenez, M., and Gonzalez-Caballero, F. (1991). "The electrokinetic properties of cellulose fabrics and their significance in dyeing processes," Cellulose Chem. Technol. 25(1-2), 65-77.
97. Exall, K. N., and vanLoon, G. W. (2003). "Effects of raw water conditions on solutionstate aluminum speciation during coagulant dilution," Water Res. 37(4), 3341-3350.
98. Fält, S., and Wågberg, L. (2003). "Influence of electrolytes on the swelling and strength of kraft-liner pulps," Nordic Pulp Paper Res. J. 18(1), 69-73.
99. Fardim, P., and Duran, N. (2005). "Effects of kraft pulping on the interfacial properties of eucalyptus pulp fibres," J. Brazilian Chem. Soc. 16(5), 915-921.
100. Fardim, P. and Holmbom, B. (2003). "Fast determination of anionic groups in different pulp fibers by methylene blue sorption," Tappi J. 2(10), 28-32.
101. Fardim, P. and Holmbom, B. (2005). "Origin and surface distribution of anionic groups in different papermaking fibers," Colloids Surf. A 252, 237-242.
102. Fardim, P., Hullten, A. H., Boisvert, J. P., Johansson, L. S., Ernstsson, M., Campbell, J. M., Lejeune, A., Holmbom, B., Laine, J., and Gray, D. (2006). "Critical comparison of methods for surface coverage by extractives and lignin in pulps by X-ray photoelectron spectroscopy (XPS)," Holtzforschung 60(2), 149-155.
103. Farley, C. E. (1997). "Factors influencing the rate of charge decay," Tappi J. 80(10), 177-183
104. Farnood, R. R., Loewen, S. R., and Dodson, C. T. J. (1994). "Estimation of intra-floc forces," Appita 47(5), 391-396.
105. Feng, X. H., Pelton, R., Leduc, M., and Champ, S. (2007a). "Colloidal complexes from poly(vinyl amine) and carboxymethyl cellulose mixtures," Langmuir 23(6), 2970-2976.
106. Feng, X., Pouw, K., Leung, V., and Pelton, R. (2007b). "Adhesion of colloidal polyelectrolyte complexes to wet cellulose," Biomacromol. 8(7), 2161-2166.
107. Fernandez Diniz, J. M. B. (1995). "Distribution of Charge in Wood Pulps," Langmuir 11(10), 3617-3619.
108. Fleer, G. J., Cohen-Stuart, M. A., Scheutjens, J. M. H. M., Cosgrove, T., and Vincent, B. (eds.), (1993). Polymers at Interfaces, Chapman and Hall, London, see 343-375.
109. Forsström, J., Eriksson, M., and Wågberg, L. (2005). "A new technique for evaluating ink-cellulose interactions: Initial studies of the influence of surface energy and surface roughness," J. Adhesion Sci. Technol. 19(9), 783-798.
110. Freudenberg, U., Zimmermann, R., Schmidt, K., Behrens, S. H., and Werner, C. (2007). "Charging and swelling of cellulose films," J. Colloid Interface Sci. 309(2), 360-365.
111. Fröberg, J. C., Rojas, O. J., and Claesson, P. M. (1999). "Surface forces and measuring techniques," Int. J. Miner. Process. 56, 1-30.
112. nd Ed., D. N.-S. Hon and N. Shiraishi (eds.), Dekker, New York, Ch. 1, 1-49.
113. Gärdlund, L., Forsström, J., Andreasson, B., and Wågberg, L. (2005). "Influence of polyelectrolyte complexes on the strength properties of papers from unbleached kraft pulps with different yields," Nordic Pulp Paper Res. J. 20(1), 71-77.
114. Gärdlund, L., Wågbberg, L., and Gernandt, R. (2003). "Polyelectrolyte complexes for surface modification of wood fibers. 2. Influence of complexes on wet and dry strength of paper," Colloids Surf. A 218(1-3), 137-149.
115. th Natl. ISA Analysis Inst. Symp., Houston, TX, 181-198.
116. Gernandt, R., Wågberg, L., Gärdlund, L., and Dauzenberg, H. (2003). "Polyelectrolyte complexes for surface modification of wood fibers. 1. Preparation and characterization of complexes for dry and wet strength improvement of paper," Colloids Surf. A 213(1), 15-25.
117. Gert, E. V. (1996). "Possibilities of nitric acid preparation of powder cellulose forms," Cellulose 3(4), 217-228.
118. Ghosh, B. N., and Pal, P. K. (1961). "Evaluation of zeta potential with correction of cell constant and surface conductance," Trans. Faraday Soc. 57, 116-122.
119. Giri, M., Simonsen, J., and Rochefort, W. E. (2000). "Dispersion of pulp slurries using carboxymethylcellulose," Tappi J. 83(10), 58 [electronic document].
120. Goossens, J. W. S., and Luner, P. (1976). "Flocculation of microcrystalline cellulose suspensions with cationic polymers - Effect of agitation," Tappi 59(2), 89-94.
121. Goring, D. A. I., and Mason, S. G. (1950a). "Electrokinetic properties of cellulose fibers. 1. Stream potential and electro-osmosis," Can. J. Res. B 28(6), 307-322.
122. Goring, D. A. I., and Mason, S. G. (1950b). "Electrokinetic properties of cellulose fibers. 2. Zeta-potential measurements by the stream-compression method," Can. J. Res.-Sec. B 28(6), 323-338.
123. Goulet, M. T. and Stratton, R. A. (1990). "The effect of pulping, bleaching, and refining operations on the electrokinetic properties of wood fines," Nordic Pulp Paper Res. J. 5(3), 118-125.
124. Grancaric, A. M., Pusic, T., Soljacic, I., and Ribitsch, V. (1997). "Influence of electrokinetic potential on adsorption of cationic surfactants," Textile Chemist Colorist 29(12), 33-35.
125. Grancaric, A. M., Tarbuk, A., and Pusic, T. (2005). "Electrokinetic properties of textile fabrics," Coloration Technol. 121(4), 221-227.
126. Grignon, J., and Scallan, A. M. (1980). "Effect of pH and neutral salts upon the swelling of cellulose gels," J. Appl. Polymer Sci. 25(12), 2829-2843.
127. Gruber, E., Grossmann, K., and Schempp, W. (1996). "Interactions of synthetic cationic polymers with fibers and fillers; Influence on adsorption," Wochenbl. Papierfabr. 124(1), 4-11.
128. Habibi, Y., Chanzy, H., and Vignon, M. R. (2006). "TEMPO-mediated surface oxidation of cellulose whiskers," Cellulose 13(6), 679-687.
129. Habibi, Y., Foulon, L., Aguie-Beghin, V., Molinari, M., and Douillard, R. (2007). "Langmuir-Blodgett films of cellulose nanocrystals: Preparation and characterization," J. Colloid Interface Sci. 316(2), 388-397.
130. Halab-Kessira, L., and Ricard, A. (1996). "Adsorption of CaCO3 particles on cationic cellulose graft copolymers .2. Effect of physical parameters," J. Colloid Interface Sci. 184(2), 437-442.
131. Halabisky, D. D. (1977). "Wet-end control for the effective use of cationic starch," Tappi 60(12), 125-127.
132. Hamaker, H. C. (1937). "The London-van der Waals attraction between spherical particles," Physica 4, 1058-1072.
133. Hand, V., Koethe, J., Kuchibhotla, S., and Scott, W. (1993). "An evaluation of two padforming paper stock charge analyzers," Papermakers Conf. Proc., TAPPI Press, Atlanta, 591-598.
134. Hannuksela, T., and Holmbom, B. (2004). "Sorption of mannans to different fiber surfaces: An evolution of understanding," Hemicelluloses: Sci. Technol., ACS Symp. Ser. 864, 222-235.
135. Hannuksela, T., Tenkanen, M., and Holmbom, B. (2002). "Sorption of dissolved galactoglucomannans and galactomannans to bleached kraft pulp," Cellulose 9(3-4), 251-261.
136. Haslam, J. H., and Steele, F. A. (1936). "The retention of pigments in paper," Tech. Assoc. Papers 19, 249-252.
137. Heiner, A. P., Kuutti, L., and Teleman, O. (1998). "Comparison of the interface between water and four surfaces of native crystalline cellulose by molecular dynamics simulations," Carbohydrate Res. 306(1-2), 205-220.
138. Heiner, A. P., and Teleman, O. (1997). "Interface between monoclinic crystalline cellulose and water: Breakdown of the odd/even duplicity," Langmuir 13(11), 511-518; (26), 7305 (erratum).
139. Herrington, T. M., and Midmore, B. R. (1984a). "Adsorption of ions at the cellulose aqueous-electrolyte interface. 1. Charge pH isotherms," J. Chem. Soc. - Faraday Trans. I 80(6), 1525-1537.
140. Herrington, T. M., and Midmore, B. R. (1984b). "Adsorption of ions at the cellulose aqueous-electrolyte interface. 2. Determination of the surface-area of cellulose fibers," J. Chem. Soc. - Faraday Trans. I 80(6), 1539-1552.
141. Herrington, T. M., and Midmore, B. R. (1984c). "Adsorption of ions at the cellulose aqueous-electrolyte interface. 3. Calculation of the potential at the surface of cellulose fibers," J. Chem. Soc. - Faraday Trans. I 80(6), 1539-1552.
142. Herrington, T. M., and Petzold, J. C. (1992). "An investigation into the nature of charge on the surface of papermaking woodpulps. 2. Analysis of potentiometric titration data," Colloids Surf. 64(2), 109-118.
143. Hesselink, F. T. (1977). "Theory of polyelectrolyte adsorption - Effect on adsorption behavior of electrostatic contribution to adsorption free-energy," J. Colloid Interface Sci. 60, 448-466.
144. rd Ed., Dekker, New York.
145. Hoffmann, F., Müller, R., Rohloff, E., and Tretter, H. (1975). "Erfahrungen mit der Strömungspotentialmethode bei Retentions- und Naßfestigkeitsproblemen," Papier 29(12), 529-534.
146. Hogg, R., Healy, T. W., and Fuerstenau, D. W. (1966). "Mutual coagulation of colloidal dispersions," Trans. Faraday Soc. 62(6), 1638-1651.
147. Holmberg, M., Berg, J., Stemme, S., Ödberg, L., Rasmusson, J., and Claesson, P. (1997a). "Surface force studies of Langmuir-Blodgett cellulose films," J. Colloid Interface Sci. 186(2), 369-381.
148. Holmberg, M., Wigren, R., Erlandsson, R., and Claesson, P. M. (1997b). "Interactions between cellulose and colloidal silica in the presence of polyelectrolytes," Colloids Surf. A 129-130, 175-183.
149. Horn, D. (2001). "Exploring the nanoworld of interfaces and their functions during paper manufacturing and upgrading," Wochenbl. Papierfabr. 129(23/24), 1589-1596.
150. Horn, D., and Melzer, J. (1975). "The effect of high molecular cationic dewatering aids on the electrokinetic properties of pulp," Papier 29(12), 534-541.
151. Horn, D., and Melzer, J. (1977). "Electrostatic and steric effects of cationic polymers adsorbed on cellulose," Trans BPBIF Symp. Fiber-Water Interactions in Papermaking (Oxford), 135-150.
152. Horvath, A. E., Lindström, T., and Laine, J. (2006). "On the indirect polyelectrolyte titration of cellulosic fibers. Conditions for charge stoichiometry and comparison with ESCA," Langmuir 22(2), 824-830.
153. Hostetler, R. E.., and Swanson, J. W. (1974). "Diffusion into and adsorption of polyethylenimine on porous silica gel," J. Polymer Sci. 12(1), 29-43.
154. Hubbe, M. A. (1979). "A modified reporting procedure for polyelectrolyte titrations," Tappi 62(8), 120-121.
155. Hubbe, M. A. (1984). "Theory of detachment of colloidal particles from flat surfaces exposed to flow," Colloids Surf. 12, 151-178.
156. Hubbe, M. A. (1985). "Detachment of colloidal hydrous oxide spheres from flat solids exposed to flow. 2. Mechanism of release," Colloids Surf. 16(3-4), 249-270.
157. Hubbe, M. A. (1987a). "Detachment of colloidal hydrous oxide spheres from flat solids exposed to flow. 3. Forces of adhesion," Colloids Surf. 25(2-4), 311-324.
158. Hubbe, M. A. (1987b). "Detachment of colloidal hydrous oxide spheres from flat solids exposed to flow. 4. Effects of polyelectrolytes," Colloids Surf. 25, 325-339.
159. Hubbe, M. A. (1999). "Method and apparatus for measuring an electrical property of papermaking furnish," U.S. Patent 5,936,151, Aug. 10.
160. Hubbe, M. A. (2000a). "Selecting and interpreting colloidal charge measurements," Proc. Scientific and Technical Advances in Wet End Chemistry, PIRA, Barcelona, June 19-20.
161. Hubbe, M. A. (2000b). "Reversibility of polymer-induced fiber flocculation by shear. 1," Nordic Pulp and Paper Res. J. 15(5), 545-553; 16(4), 375.
162. Hubbe, M. A. (2001b). "Method for determining electrokinetic properties of papermaking furnish," U.S. Patent 6,176,974, Jan. 23.
163. Hubbe, M. A. (2005). "Microparticle programs for drainage and retention," in Rodriguez, J. M. (ed.), Micro and Nanoparticles in Papermaking, TAPPI Press, Atlanta, Chapter 1, 1-36.
164. Hubbe, M. A. (2007). "Flocculation and redispersion of cellulosic fiber suspensions: A review of effects of hydrodynamic shear and polyelectrolytes," BioRes. 2(2), 296-331.
165. Hubbe, M. A., and Chen, J. (2004). "Charge-related measurements - A reappraisal. Part 1. Streaming current," Paper Technol. 45(8), 17-23.
166. Hubbe, M. A., and Heitmann, J. A. (2007). "Review of factors affecting the release of water from cellulosic fibers during paper manufacture," BioRes. 2(3), 500-533.
167. Hubbe, M. A., Moore, S. M., and Lee, S. Y. (2005). "Effects of charge ratios and cationic polymer nature on polyelectrolyte complex deposition onto cellulose," Ind. Eng. Chem. Res. 44(9), 3068-3074.
168. Hubbe, M. A., Rojas, O. J., Argyropoulos, D. S., Wang, Y., Song, J., Sulić, N., and Sezaki, T. (2007c). "Charge and the dry-strength performance of polyampholytes. Part 2. Colloidal effects," Colloids Surf. A 301(1), 23-32.
169. Hubbe, M. A., Rojas, O. J., Lee, S. Y., Park, S., and Wang, Y. (2007b). "Distinctive electrokinetic behavior of nanoporous silica particles treated with cationic polyelectrolyte," Colloids Surf. A 292(2), 271-278.
170. Hubbe, M. A., Rojas, O. J., Lucia, L. A., and Jung, T. M. (2007a). "Consequences of the nanoporosity of cellulosic fibers on their streaming potential and their interactions with cationic polyelectrolytes," Cellulose 14(6), 655-671.
171. Hubbe, M. A., Rojas, O. J., and Venditti, R. A. (2006). "Control of tacky deposits on paper machines - A review," Nordic Pulp Paper Res. J. 21(2), 154-171.
172. Hubbe, M. A., Rojas, O. J., Lucia, L., A., and Sain, M. (2008). "Cellulosic nanocomposites: A review," BioRes. 3(3), 929-980.
173. Hubbe, M. A., Wagle, D. G., and Ruckel, E. R. (1999). "Method for increasing the strength of a paper or paperboard product," U.S. Patent 5,956,180.
174. Hubbe, M. A., and Wang, F. (2002). "Where to add retention aid: Issues of time and shear," Tappi J. 1(1), 28-33.
175. Hubbe, M. A. and Wang, F. (2004). "Charge-related measurements - A reappraisal. Part 2: Fiber-pad streaming potential," Paper Technol. 45(9), 27-34.
176. Hunter, R. J. (1981). Zeta Potential in Colloid Science, Academic Press, London.
177. nd Ed., Oxford Univ. Press, Oxford.
178. Iamazaki, E. T., and Atvars, T. D. Z. (2007). "Sorption of a fluorescent whitening agent (Tinopal CBS) onto modified cellulose fibers in the presence of surfactants and salt," Langmuir 23(26), 12886-12892.
179. Ibrahim, T. H., Burk, T. R., Etzler, F. M., and Neuman, R. D. (2000). "Direct adhesion measurements of pharmaceutical particles to gelatin capsule surfaces," Journal of Adhesion Science and Technology 14(10), 1225-1242.
180. Isogai, A., Kitaoka, C., and Onabe, F. (1997). "Effects of carboxyl groups in pulp on retention of alkylketene dimer," J. Pulp Paper Sci. 23(5), J215-J219.
181. Israelachvili, J. N. (1992). Intermolecular and Surface Forces, Academic Press, London
182. Israelachvili, J. N., and McGuiggan, P. M. (1990). "Adhesion and short-range forces between surfaces. 1. New apparatus for surface force measurements," J. Mater. Res. 5(10), 2223-2231.
183. Iyer, S. R. S., and Jayaram, R. (1971). "Zeta-potential studies in cellulose fibre-aqueous electrolyte solution systems," J. Soc. Dyers Colourists 87(10), 338-342.
184. Jacob, P. N., and Berg, J. C. (1993). "Contact-angle titrations of pulp fiber furnishes," TAPPI J. 76(5), 133-137.
185. Jacobasch, H. J., Grundke, K., and Werner, C. (1995). "Surface characterization of cellulose materials," Papier 49(12), 740-745.
186. Jacquelin, G., and Bourlas, H. (1964). "Measurement of the zeta potential of papermaking fibers. Effects of preliminary treatments," Techniques et Recherches Papeteries 3, 49-58.
187. Jaycock, M. J. (1995). "Assumptions made in the measurement of zeta-potential by streaming current/potential detectors," Paper Technol. 36(3), 35-38.
188. Jaycock, M. J., and Pearson, J. L. (1975). "Colloidal aspects of paper formation .1. Factors affecting electrokinetic properties of cellulose fibers," Svensk Papperstidn. 78(5), 167-171.
189. Jaycock, M. J., and Pearson, J. L. (1976a). "A study of the retention of pigment during paper formation," J. Colloid Interface Sci. 55(1), 181-190.
190. Jaycock, M. J., Pearson, J. L., Counter, R., and Husband, F. W. (1976b). "Effect of cellulose fiber fines on the retention of fillers,"
191. Jaycock, M. J., and Swales, D. K. (1994). "The theory of retention," Paper Technol. 35(8), 26-33.
192. Jayme, G. and Büttel, H. (1968). "The determination and meaning of water retention value (WRV) of various bleached and unbleached cellulosic pulps," Wochenbl. Papierfabr. 96(6), 180-187.
193. Johnsen, I. A., Stenius, P., Tammelin, T., Österberg, M., Johansson, L. S., and Laine. J. (2006). "The influence of dissolved substances on resin adsorption to TMP fine material," Nordic Pulp Paper Res. J. 21(5), 629-637.
194. Joubert, J. M., Kirge, G. J. R., and Borgin, K. (1959). "Evidence for a hydrate of cellulose from studies of its surface properties," Nature 184(4698), 1561-1562.
195. Kadla, J. F., and Gilbert, R. D. (2000). "Cellulose structure: A review," Cellulose Chem. Technol. 34(3-4), 197-216.
196. Kamiti, M., and van de Ven, T. G. M. (1995). "Impinging jet studies of the kinetics of deposition and dissolution of calcium-carbonate particles," Colloids Surf. A 100, 117-129.
197. Kang, T., and Paulapuro, H. (2006). "Characterization of chemical pulp fines," Tappi J. 5(2), 25-28
198. Katz, K., Beatson, R. P., and Scallan, A. M. (1984). "The determination of strong and weak acidic groups in sulfite pulps," Svensk Papperstidning 87(6), R48-R53.
199. Kenaga, D. L., Kindler, W. A., and Meyer, F. J. (1967). "Studies of adsorption of cationic polyelectrolytes on pulp using streaming current detection," Tappi 50(7), 381-387.
200. King, C. A., and Williams, D. G. (1975). "Cellulose fiber-to-fiber and fines-in-fiber flocculation: A dynamic comparison," IPC Tech Paper Ser. 3, Inst. Paper Sci. Technol. at Georgia Inst. Technol., Atlanta, available at http://smartech.gatech.edu/dspace/handle/1853/2896?mode=full.
201. Kleen, M., Kangas, H., and Laine, C. (2003). "Chemical characterization of mechanical pulp fines and fiber surface layers," Nordic Pulp Paper Res. J. 18(4), 361-368.
202. Kleimann, J., Lecoultre, G., Papastavrou, G., Jeanneret, S., Galletto, P., Koper, G. J. M., and Borkovec, M. (2006). "Deposition of nanosized latex particles onto silica and cellulose surfaces studied by optical reflectometry," J. Colloid Interface Sci. 303(2), 460-471.
203. Kline, J. E. (1967). "The application of the Verwey-Overbeek theory to the relative sediment volume of kaolin-water dispersions," Tappi 50(12), 590-596.
204. Kocherbitov, V., Ulvenlund, S., Kober, M., Jarring, K., and Arnebrant, T. (2008). "Hydration of microcrystalline cellulose and milled cellulose studied by sorption calorimetry," J. Phys. Chem. B 112(12), 3728-3734.
205. Koethe, J. L., and Scott, W. E. (1993). "Polyelectrolyte interactions with papermaking fibers: The mechanism of surface-charge decay," Tappi J. 76(12), 123-133
206. Koljonen, K., Mustaranta, A., and Stenius, P. (2004). "Surface characterization of mechanical pulps by polyelectrolyte adsorption," Nordic Pulp Paper Res. J. 19(4), 495-505.
207. Kontturi, E., Tammelin, T., and Österberg, M. (2006). "Cellulose - Model films and the fundamental approach," Chem. Soc. Rev. 35(12), 1287-1304.
208. Kotz, J., Bogen, I., Heinze, U., Heinze, T., Klemm, D., Lange, S., and Kulicke, W. M. (1998). "Colloidal properties of statistic, blocklike and regioselective substituted carboxymethylcelluloses," Papier 52(12), 704-712.
209. Kratochvil, D., Alince, B., and van de Ven, T. G. M. (1999). "Flocculation of clay particles with poorly and well-dissolved polyethylene oxide," J. Pulp Paper Sci. 25(9), 331-335.
210. Kratohvil, S., Janauer, G. E., and Matijević, E. (1969). "Coagulation of microcrystalline cellulose dispersions," J. Colloid Interface Sci. 29(2), 187-193.
211. Kumar, A. R., and Teli, M. (2007). "Electrokinetic studies of modified cellulosic fibres," Colloids Surf. A. 301(1-3), 462-468.
212. Lafaye, J. F., and Jacquelin, G. (1968). "The zeta potential and its application in paper making," Paperi Puu 50(4a), 155-162.
213. Laine, J. (1997). "Effect of ECF and TCF bleaching on the charge properties of kraft pulp," Paperi Puu 79(8), 551-559.
214. Laine, J., Buchert, J., Viikari, L., and Stenius, P. (1996). "Characterization of unbleached kraft pulps by enzymatic treatment, potentiometric titration and polyelectrolyte adsorption," Holzforschung 50(3), 208-214.
215. Laine, J., and Lindström, T. (2001). "Topochemical modification of cellulosic fibres with bipolar activators - An overview of some technical applications," Int. Papierwirtsch. 1, 40-45.
216. Laine, J., Lindström, T., Glad Nordmark, G., and Risinger, G. (2000). "Studies on topochemical modification of cellulosic fibers. Part 1. Chemical conditions for the attachment of carboxymethyl cellulose onto fibers," Nordic Pulp Paper Res. J. 15(5), 520-526.
217. Laine, J., Lindström, T., Glad Nordmark, G., and Risinger, G. (2002). "Studies on topochemical modification of cellulosic fibers. Part 2. The effect of carboxymethyl cellulose attachment on fibre swelling and paper strength," Nordic Pulp Paper Res. J. 15(5), 520-526.
218. Laine, J., Lindström, T., Bremberg, C., and Glad Nordmark, G. (2003a). "Studies on topochemical modification of cellulosic fibers. Part 4. Toposelectivity of carboxymethylation and its effects on the swelling of fibres," Nordic Pulp Paper Res. J. 18(3), 316-324.
219. Laine, J., Lindström, T., Bremberg, C., and Glad Nordmark, G. (2003b). "Studies on topochemical modification of cellulosic fibers. Part 5. Comparison of the effects of surface and bulk chemical modification and beating of pulp on paper properties," Nordic Pulp Paper Res. J. 18(3), 325-332.
220. Laine, J., Lovgren, L., Stenius, P., and Sjöberg, S. (1994). "Potentiometric titration of unbleached kraft cellulose fiber surfaces," Colloids Surf. A 88(2-3), 277-287.
221. Laine, J., Mattsson, R., and Swerin, A. (2004), "The effect of bleached pulp type on AKD internal sizing - An EuroFEX experimetnal paper machine study," Paperi Puu 86(3), 325-332.
222. Laine, J., and Stenius, P. (1997). "Effect of charge on the fiber and paper properties of bleached industrial kraft pulps," Paperi Puu 79(4), 257-266.
223. La Mer, V. K., and Healy, T. W. (1963). "Adsorption-flocculation reactions of macromolecules at the solid-liquid interface," Rev. Pure Appl. Chem. 13(Sept.), 112-133.
224. Leiviskä, T., Rämö, J., Sillanpää, M., and Vuorenpalo, V.-M. (2005). "Multimodal zeta potential distributions in chemical pulp bleaching filtrates," J. Pulp Paper Sci. 31(4), 167-174.
225. Leporatti, S., Sczech, R., Riegler, H., Bruzzano, S., Storsberg, J., Loth, F., Jaeger, W., Laschewsky, A., Eichhorn, S., and Donath, E. (2005). "Interaction forces between cellulose microspheres and ultrathin cellulose films monitored by colloidal probe microscopy - Effect of wet strength agents," J. Colloid Interface Sci. 281(1), 101-111.
226. nd International Symposium on Technologies of Pulping, Papermaking and Biotechnology on Fiber Plants, Oct. 13-14, Nanjing Forestry Univ., 434-437.
227. Li, T. Q., Henriksson, U., Eriksson, J. C., and Ödberg, L. (1992). "Water cellulose interaction in wood pulp fiber suspensions studied by O-17 and H-2 NMR relaxation - The effect of beating," Langmuir 8(2), 680-686.
228. Lima, M. M. D., and Borsali, R. (2004). "Rodlike cellulose microcrystals: Structure, properties, and applications," Macromol. Rapid Comm. 25(7), 771-787.
229. Lindgren, H., Öhman, L.-O., Gunnars, S., and Wågberg, L. (2002). "Charge determinations of cellulose fibers of different origin - Comparison between different methods," Nordic Pulp Paper Res. J. 17(1), 89-96.
230. Lindgren, H., and Öhman, L.-O. (2000). "Characterization of acid/base properties for bleached softwood fibers as influenced by ionic salt medium," Nordic Pulp Paper Res. J. 15(1), 18-23.
231. Lindgren, L., Persson, P., and Öhman, L. O. (2001). "Interactions of calcium(II), copper(II) and aluminium(III) ions with two chemically modified wood fibres," Nordic Pulp Paper Res. J. 16(3), 225-234.
232. Lindström, T., (1991). "Electrokinetics of the papermaking industry," in Paper Chemistry, J. C. Roberts (ed.), Blackie, London, Ch. 3, 25-43.
233. Lindström, T. (1992). "Chemical factors affecting the behavior of fibers during papermaking." Nordic Pulp Paper Res. J. 7(4), 181-192.
234. nd Ed., Blackie Academic, New York, Ch. 3, 25-43.
235. Lindström, T., and Carlsson, G. (1982). "The effect of carboxyl groups and their ionic form during drying on the hornification of cellulose fibers," Svensk Papperstidn. 85(15), R146-R151.
236. Lindström, T., and Glad-Nordmark, G. (1984). "Network flocculation and fractionation of latex particles by means of a polyethyleneoxide-phenolformaldehyde resin complex," J. Colloid Interface Sci. 97(1), 62-67.
237. Lindström, T., and Söremark, C. (1975). "Zeta potential measurement in the manufacture of paper," Papier 29(12), 519-525
238. Lindström, T., and Söremark, C. (1976). "Adsorption of cationic polyacrylamides on cellulose," J. Colloid Interface Sci. 55(2), 305-312.
239. Lindström, T., Söremark, C., Heinegård, C., and Martin-Löf, S. (1974). "The importance of electrokinetic properties of wood fiber for papermaking," Tappi 57(12), 94-96.
240. Lloyd, J. A., and Horne, C. W. (1993). "The determination of fiber charge and acidic groups of radiata pine pulps," Nordic Pulp Paper Res. J. 8(1), 48-52.
241. Lokhande, H. T., and Salvi, A. S. (1976). "Electrokinetic studies of cellulosic fibers. 1. Zeta-potential of fibers dyed with reactive dyes," Colloid Polymer Sci. 254(11), 1030-1041.
242. Lokhande, H. T., and Salvi, A. S. (1978). "Electrokinetic studies of cellulosic fibers. 2. Surface charge density of fibers dyed with reactive dyes," Colloid Polymer Sci. 256(10), 1021-1028.
243. Lofton, M. C., Moore, S. M., Hubbe, M. A., and Lee, S. Y. (2005). "Polyelectrolyte complex desposition as a mechanism of paper dry-strength development," Tappi J. 4(9), 3-7.
244. Lvov, Y. M., Grozdits, G. A., Eadula, S., Zheng, Z. G., and Lu, Z. H. (2006). "Dry and wet strength of paper - Layer-by-layer nanocoating of mill broken fibers for improved paper," Nordic Pulp and Paper Research Journal 21(5), 552-557.
245. Madan, G. L., Shirvastava, S. K., and Baddi, N. T. (1973). "Electrokinetic studies of cotton. Part 1: Streaming potential measurements of dimethylol ethyelene urea treated cotton," Kolloid Z. Z. Polymere 251(7), 483-489.
246. Madan, G. L., and Shrivastava, S. K. (1975). "Electrokinetic studies of cotton. 2. Measurement of surface potential at interface between cellulose and solution of crosslinking agents," Colloid Polymer Sci. 253(11), 969-973.
247. Mahanty, J., and Ninham, B. W. (1975). "Self-energy in adsorption," Faraday Discussions 59, 13-21.
248. Maloney, T. C., Laine, J. E., and Paulapuro, H. (1999). "Comments on the measurement of cell wall water," Tappi J. 82(9), 125-127.
249. Mann, J., and Marrinan, H. J. (1958). "Polarized infrared spectra of cellulose-1," J. Polymer Sci. 27(115), 595-596 (1958).
250. Manouchehri, H. R., Rao, K. H., and Forssberg, K. S. E. (2001). "Triboelectric charge characteristics and donor-acceptor, acid-based properties of minerals - Are they related?" Particulate Sci. Technol. 19(1), 23-43.
251. Marton, J. (1980a). "The role of surface chemistry in fines - alum interactions," Tappi 63(2), 121-125.
252. Marton, J. (1980b). "The role of surface chemistry in fines - cationic starch nteractions," Tappi 63(4), 87-91.
253. Marton, J., and Marton T. (1976). "Wet end starch: Adsorption of starch on cellulosic fibers," Tappi 59(12), 121-124.
254. Mathews, J., Gustafson, R. and Hodgson, K. (2004). "A method to determine the charge demand of single pulp fibers," Nordic Pulp Paper Res. J. 19(4), 453-459.
255. Matijević, E., Shulz, K., Mirnik, M., Herak, J., Vouk, V. B., Sjunjski, M., Babic, S., Kratohvil, J., and Palarm, T. (1953). "The mechanism of coagulation of lyophobic sols as revealed through investigations of silver halide solids in statu-nascendi," J. Phys. Chem. 57(3), 301-307.
256. Maximova, N., Laine, J., and Stenius, P. (2005). "Adsorption of lignin-cationic starch complexes on cellulose fibres and their effect on sheet properties," Paperi Puu 87(3), 176-182.
257. Maximova, N., Stenius, P., and Salmi, J. (2004). "Lignin uptake by cellulose fibres from aqueous solutions," Nordic Pulp Paper Res. J. 19(2), 135-145.
258. McKague, J. F., Etter, D. O., Pilgrim, J. O., and Griggs, W. H. (1974). "Practical applications of the electrokinetics of papermaking," Tappi 57(12), 101-103.
259. McKenzie, A. W. (1968). "Structure and properties of paper. XVIII. The retention of wetend additives," Appita 21(4), 104-116.
260. McKenzie, A. W., Balodis, W., and Milgrom, A. (1969). "Influence of alum and pH on the zeta potential of fibers and additives," Appita 23(1), 40-44.
261. McNeal, M. R., Nanko, H., and Hubbe, M. A. (2005). "Imaging of macromolecular events occurring during the manufacture of paper," Proc. XIII Fundamental Research Symposium, Cambridge, 1225-1267.
262. Melzer, J. (1972). "Zeta potential and its importance in the manufacture of paper," Papier 26(7), 305-332.
263. Micic, M., Radotic, K., Jeremic, M., and Leblanc, R. M. (2003). "Study of self-assembly of the lignin model compound on cellulose model substrate," Macromol. Biosci. 3(2), 100-106.
264. Miyanishi, T. (1995a). "On-line zeta potential analyses of a fine paper machine and a newsprint paper machine," Tappi J. 78(3), 85-91.
265. Miyanishi, T. (1995b). "Effects of zeta potential on flocculation measurement in microparticle systems," Tappi J. 78(11), 135-150.
266. Miyanishi, T., and Montegi, S. (1996). "Optimization of flocculation and drainage for microparticle systems by zeta potential control," Proc. 1996 Papermakers Conf., TAPPI Press, Atlanta, 73-82.
267. Miyanishi, T., and Shigeru, M. (1997). "Optimizing flocculation and drainage for microparticle systems by controlling zeta potential," Tappi J. 80(1), 262-270.
268. Mocchiutti, P., and Zanuttini, M. A. (2005). "A useful equation for estimating the surface charge of pulp fibers," Tappi J. 4(5), 18-22.
269. Montanari, S., Rountani, M., Heux, L., and Vignon, M. R. (2005). "Topochemistry of carboxylated cellulose nanocrystals resulting from TEMPO-mediated oxidation," Macromol. 38(5), 1665-1671.
270. Mosbye, J., Foss, M. H., Laine, J., and Moe, S. (2003a). "Interaction between model colloidal wood resin, fillers and dissolved substances," Nordic Pulp Paper Research Journal 18(2), 194-199.
271. Mosbye, J., Harstad, B., and Fiksdahl, A. (2000). "Solid-phase extraction (SPE) of hydrophobic components from a model white water," Nordic Pulp & Paper Research Journal 15(2), 101-105.
272. Mosbye, J., Laine, J., and Moe, S. (2003b). "The effect of dissolved substances on the adsorption of colloidal extractives to fines in mechanical pulp," Nordic Pulp Paper Research Journal 18(1), 63-68.
273. Mosbye, J., Moe, S., and Laine, J. (2002). "The charge and chemical composition of fines in mechanical pulp," Nordic Pulp Paper Res. J. 17(3), 352-356.
274. Mutje, P., Vilaseca, F., Gou, M., and Pelach, M. A. (2001). "Interactions between a cationic polyelectrolyte and cellulose fibres bleached for paper manufacture," AFINIDAD 57(491), 29-38.
275. Nanko, H., and Pan, S. (2003a). "Visualization of polymer adsorption on pulp fiber. 1: Polyacrylamide," TAPPI Spring Technical Conf.
276. th, Montreal, TAPPI Press, Atlanta, 245-251.
277. Neale, S. M. (1946). "The electrical double layer, the electrokinetic potential, and the streaming current," Trans. Faraday Soc. 42, 473-478.
278. Nelson, P. F., and Kalkipsakis, C. G. (1964). "Carboxymethylation of eucalypt kraft pulp," Tappi 47(2), 107-110
279. Neuman, R. D., Berg, J. M., and Claesson, P. M. (1993). "Direct measurement of surface forces in papermaking and paper coating systems," Nordic Pulp Paper Res. J. 8(1), 96-104.
280. Newman, R. H., and Davidson, T. C. (2004). "Molecular conformations at the cellulosewater interface," Cellulose 11(1), 23-32.
281. Northrop, J. H., and Kunitz, M. (1926). "The swelling and osmotic pressure of gelatin in salt solutions," J. Gen Physiol. 8(4), 317-337.
282. Notley, S. M. (2008). "Effect of introduced charge in cellulose gels on surface interactions and the adsorption of highly charged cationic polyelectrolytes," Phys. Chem. Chem. Phys. 10(13), 1819-1825.
283. Notley, S. M., Eriksson, M., Wågberg, L., Beck, S., and Gray, D. G. (2006). "Surface forces measurements of spin-coated cellulose thin films with different crystallinity," Langmuir 22(7), 3154-3160.
284. Notley, S. M., and Norgren, M. (2006). "Measurement of interaction forces between lignin and cellulose as a function of aqueous electrolyte solution conditions," Langmuir 22(26), 11199-11204.
285. Nurmi, M., Wallin, S., and Eklund, D. (2003). "Interactions between cationic polyacryl amide and TMP," Wochenbl. Papierfabr. 131(11-12), 678-682.
286. Ödberg, L., Barla, P., and Glad-Nordmark, G. (1995). "Transfer of adsorbed alum from cellulosic fibers to clay particles," J. Pulp Paper Sci. 21(7), J250-J254.
287. Oertel, J., Petzold, G., Buchhammer, H., Geyer, S., Schwarz, S., Muller, U., and Ratzsch, M. (1991). "Introduction of surface-charge into polymers by polyelectrolyte complexes," Colloids Surf. 57(3-4), 375-381.
288. Oh, E., and Luner, P. E. (1999). "Surface free energy of ethylcellulose films and the influence of plasticizers," Intl. J. Pharmaceutics 188(2), 203-219.
289. Öhman, L. O., Wågberg, L., Malmgren, K., and Tjernström, A. (1997). "Adsorption of aluminum(III) on cellulosic fibres in neutral to alkaline solutions - Influence of charge and size of the particles formed," J. Pulp Paper Sci. 23(10), J467-J474.
290. Ojala, T. (1993). "Charge measurements of different furnishes using polyelectrolyte titration with a streaming current detector," Proc. TAPPI 1993 Papermakers Conf., 613-626.
291. Österberg, M. (2000). "The effect of a cationic polyelectrolyte on the forces between two cellulose surfaces and between one cellulose and one mineral surface," J. Colloid Interface Sci. 229(2), 620-627.
292. Paananen, A., Österberg, M., Rutland, M., Tammelin, T., Saarinen, T., Tappura, K., and Stenius, P. (2004). "Interaction between cellulose and xylan: An atomic force microscope and quartz crystal microbalance study," Hemicelluloses: Sci. Technol., ACS Symp. Ser. 864, 269-290.
293. Pang, L., and Gray, D. G., "Heterogeneous fibrillation of kraft pulp fiber surfaces observed by atomic force microscopy," J. Pulp Paper Sci. 24(11), 369-372 (1998).
294. Paria, S., Manohar, C., and Khilar, K. C. (2004). "Effect of cationic surfactant on the adsorption characteristics of anionic surfactant on cellulose surface," Colloids Surf. A 232(2-3), 139-142.
295. Paria, S., Manohar, C., and Khilar, K. C. (2005). "Adsorption of anionic and non-ionic surfactants on a cellulosic surface," Colloids Surf. A 252(2-3), 221-229.
296. Park, S., Venditti, R. A., Jameel, H., and Pawlak, J. J. (2006). "Changes in pore size distribution during the drying of cellulose fibers as measured by differential scanning calorimetry," Carbohydrate Polymers 66(1), 97-103.
297. Parks, G. A. (1965). "The isoelectric points of solid oxides, solid hydroxides, and aqueous hydroxo complex systems," Chem. Rev. 65(2), 177-198.
298. Patton, P. A., and Lee, D. T. (1993). "Charge analyses: Powerful tools in wet-end optimization," Tappi J. 76(8), 107-115.
299. Pearson, R. G. (1969). Modern Theory of Acids and Bases, American Chemical Society, Washington.
300. Pelton, R. (1993). "A model of the external surface of wood pulp fibers," Nordic Pulp Paper Res. J. 8(1), 113-119.
301. Pelton, R. H. (1999). "Polymer-colloid interactions in pulp and paper manufacture," in Farinato, R. S., and Dubin, P. L. (eds.), Colloid-Polymer Interactions: From Fundamentals to Practice, Wiley-Interscience, New York, Ch. 2, 51-82.
302. Pelton, R. H., and Allen, L. H. (1984). "Factors influencing the adhesion of polystyrene spheres attached to Pyrex by polyethyleneimine in aqueous solution," J. Colloid Interface Sci. 99(2), 387-398.
303. Penfold, J., Tucker, I., Petkov, J., and Thomas, R. K. (2007). "Surfactant adsorption onto cellulose surfaces," Langmuir 23(16), 8357-8364.
304. Penniman, J. G. (1992). "Comparison of pulp pad streaming potential measurement and mobility measurement," TAPPI J. 75(8), 111-115.
305. Petersson, L., Kvien, I., and Oksman, K. (2007). "Structure and thermal properties of poly(lactic acid)/cellulose whiskers nanocomposite materials," Composites Sci. Technol. 67(11-12), 2535-2544.
306. Petlicki, J., and van de Ven, T. G. M. (1994). "Adsorption of polyethylenimine onto cellulose fibers," Colloids Surf. A 83(1), 9-23.
307. Petzold, G., Schwarz, S., Buchhammer, H. M., and Lunkwitz, K. (1997). "A very effective method for the cationic modification of cellulose," Angew. Makromol. Chemie 253, 1-15.
308. Petzold, G., Nevel, A., Buchhammer, H.-M., and Lunkwitz, K. (1998). "Preparation and characterization of different polyelectrolyte complexes and their application as flocculants," Colloid Polymer Sci. 276(1), 125-130.
309. Pfau, A., Schrepp, W., and Horn, D. (1999). "Detection of a single molecule adsorption structure of poly(ethylenimine) macromolecules by AFM," Langmuir 15(9), 3219-3225 (1999).
310. Phipps, J. S. (1999). "Some mechanistic insights for using the streaming current detector to measure wet-end charge," Tappi J. 82(8), 157-165.
311. Poppel, E. (1992). "The meaning of zeta potential in the wet end of paper manufacture and the possibilities for optimization by means of electrokinetic control," Wochenbl. Papierfabr. 120(14), 565-571.
312. Poppel, E., Muresan, R., and Muresan, A. (2001). "The zeta potential of some cellulosic ant man-made fibers during operations of softening and antistatization," Cellulose Chem. Technol. 35(1-2), 45-57.
313. Poptoshev, E., Rutland, M. W., and Claesson, P. M. (2000). "Surface forces in aqueous polyvinylamine solutions. 2. Interactions between glass and cellulose," Langmuir 16, 1987-1992.
314. Porubska, J., Alince, B., and van de Ven, T. G. M. (2002). "Homo- and heteroflocculation of papermaking fines and fillers," Colloids Surf. A 210(2-3), 223-230.
315. Pothan, L. A., Bellman, C., Kailas, L., and Thomas, S. (2002). "Influence of chemical treatments on the electrokinetic properties of cellulose fibres," J. Adhesion Sci. Technol. 16(2), 157-178.
316. Pruszynski, P., and Jakubowksi, R. (2002). "Impact of conductivity and cationic demand on drainage of TMP-based newsprint furnish," APPITA Annual General Conf., 323-331.
317. Przybysz, K., Rybicki, E., and Czechowski, J. (2002). "Electrokinetic potential studies of dissolved substances washed out in the paper-making process," Fibres & Textiles in Eastern Europe 10(2), 65-68.
318. Pusic, T., Grancaric, A. M., Soljacic, I., and Ribitsch, V. (1999). "The effect of mercerisation on the electrokinetic potential of cotton," J. Soc. Dyers Colourists 115(4), 121-124.
319. Radtchenko, I. L., Papastavrou, G., and Borkovec, M. (2005). "Direct force measurements between cellulose surfaces and colloidal silica particles," Biomacromol. 6(6), 3057-3066
320. Ramirez-Dorronsoro, J. C., Jacko, R. B., and Kildsig, D. O. (2006). "Chargeability measurements of selected pharmaceutical dry powders to assess their electrostatic charge control capabilities," AAPS Pharmscitech 7(4), Article no. 103.
321. ++ on cellulose fibers: Prediction and analysis of sorption equilibrium with electrostatic models," Proc. ISWPC, Paper 94, 1-5.
322. Räsänen, E., Stenius, P., and Tervola, P. (2001). "Model describing Donnan equilibrium, pH and complexation equilibria in fiber suspensions," Nordic Pulp Paper Res. J. 16(2), 130-139.
323. Ravnjak, D., Plazl, I., and Moze, A. (2007). "Kinetics of colloidal alkylketene dimer particles deposition on pulp fibers," Colloid Polymer Sci. 285(8), 907-914.
324. Reischl, M., Stana-Kleinschek, K., and Ribitsch, V. (2006). "Adsorption of surfactants on polymer surfaces investigated with a novel zeta-potential measurement system," Adv. Materials Forum III, 514-516(Pts. 1-2), 1374-1378.
325. Ribitsch, V., Stana-Kleinschek, K., Kreze, T., and Strnad, S. (2001). "The significance of surface charge and structure on the accessibility of cellulose fibres," Macromol. Mater. Eng. 286(10), 648-654.
326. Rice, M., and Roeraade, J. (2003). "Continuous filtration and titration apparatus for real time monitoring of polyelectrolyte concentration and cationic demand of a paper furnish," Nordic Pulp Paper Res. J. 18(1), 95-107.
327. Roberts, J. C., and Tatham, J. (1992). "Succinylation of pulps," in The Chemistry of Papermaking, paper 08, Pira Int'l., Leatherhead, Surrey, UK.
328. Roberts, K., Kowalews, J., and Friberg, S. (1974). "Influence of aluminum salts on colloidal properties of abietic acid suspensions, and on co-flocculation with cellulose fines," Svensk Papperstidn. 77(7), 239-246.
329. Rohloff, E., and Höschle, O. (1993). "Zeta potential experiences with laboratory and online measurements," Wochenbl. Papierfabr. 121(23-24), 990-994.
330. Rohrsetzer, S., Kovacs, P., Kabaifaix, M., Papp, J., and Volgyi, P. (1995). "Investigation of the inside and outside surfaces of pulp fibers by adsorption of molecular, colloidal and coarse size particles," Cellulose Chem. Technol. 29(1), 65-75.
331. Rojas, O. J., Claesson, P. M., Muller, D., and Neuman, R. D. (1998). "The effect of salt concentration on adsorption of low-charge-density polyelectrolytes and interactions between polyelectrolyte-coated surfaces," J. Colloid Interface Sci. 205(1), 77-88.
332. Rojas, O. J., Dedinaite, A., Byrd, M. V., Hubbe, M. A., and Claesson, P.M. (2005). "On the origins of adhesion in papermaking systems," Proc. XIII Fundamental Research Symposium, Cambridge, S. J. I'Anson, (ed.), Vol. 2, p. 1351-1378, Digital Books Logistics Ltd, Peterborough, UK, 2005.
333. Rojas, O. J., Ernstsson, M., Neuman, R. D., and Claesson, P. M. (2000). "X-ray photoelectric spectroscopy in the study of polyelectrolyte adsorption on mica and cellulose," J. Phys. Chem. B 104, 10032-10042.
334. Rojas, O. J., and Hubbe, M. A. (2004). "The dispersion science of papermaking," J. Dispersion Sci. Technol. 25(6), 713-732.
335. Rojas, O. J., and Neuman, R. D. (1999). "Adsorption of polysaccharide wet-end additives in papermaking systems," Colloids Surf. A 155(2-3), 419-432.
336. Rojas, O. J., Neuman, R. D., and Claesson, P. M. (2001). "Desorption of low-chargedensity polyelectrolyte adlayers in aqueous sodium n-dodecyl sulfate solution," Journal of Colloid and Interface Science 237(1), 104-111.
337. Roman, M., and Gray, D. G. (2005). "Parabolic focal conics in self-assembled solid films of cellulose nanocrystals," Langmuir 21(12), 5555-5561.
338. Rundlöf, M., Htun, M., Höglund, H., and Wågberg, L. (2000). "Mechanical pulp fines of poor quality - Characteristics and influence of white water," J. Pulp Paper Sci. 26(9), 308-316.
339. Rutland, M. W., Carambassis, A., Willing, G. A., and Neuman, R. D. (1997). "Surface force measurements between cellulose surfaces using scanning probe microscopy," Colloids and Surfaces A 123, 369-374.
340. Sack, W. (1976). "Continuous streaming potential measurements on a paper machine," Papier 30(10A), V42-V46.
341. Sack, W., Storbeck, W., and Winiker, R. (1993). "Ten years experience with continuous zeta potential measurements for paper machine process control," Wochenbl. Papierfabr. 121(19), 803-805.
342. Saito, T., and Isogai, A. (2007). "Wet strength improvement of TEMPO-oxidized cellulose sheets prepared with cationic polymers," Indust. Eng. Chem. Res. 46(3), 773-780.
343. Saito, T., Yanagisawa, M., and Isogai, A. (2005). "TEMPO-mediated oxidation of native cellulose: SEC-MALLS analysis of water-soluble and -insoluble fractions in the oxidized products," Cellulose 12(3), 305-315.
344. th Fundamental Res. Symp., Cambridge, Sept. 1997, Baker, C. F. (ed.), Pira Intl., Leatherhead, Surrey, UK, Vol. 2, 683-701.
345. Salmén, L., Kolselth, P., and de Ruvo, A. (1985). "Modeling the softening behavior of wood fibers," J. Pulp Paper Sci. 11(4), J102-J107.
346. Salmi, J., Österberg, M., and Laine, J. (2007b). "The effect of cationic polyelectrolyte complexes on interactions between cellulose surfaces," Colloids Surf. A 297(1-3), 122-130.
347. Salmi, J., Österberg, M., Stenius, P., and Laine, J. (2007a). "Surface forces between cellulose surfaces in cationic polyelectrolyte solutions: The effect of polymer molecular weight and charge density," Nordic Pulp Paper Res. J. 22(2), 249-257.
348. Sandell, L. S., and Luner, P. (1974). "Flocculation of microcrystalline cellulose with cationic ionene polymers," J. Appl. Polymer Sci. 18(7), 2075-2083.
349. Sanders, N. D. (1994). "The occurrence and importance of polymodal electrophoretic mobility distributions," Dispersion Aggregation, Proc. Eng. Found. Conf. 1992 (Pub. 1994), B. M. Moudgil and P. Somasundaran, Eds., 183-190.
350. Sanders, N. D., and Schaefer, J. H. (1989). "Zeta potential distributions in pulp/PCC mixtures," Proc. TAPPI 1989 Papermakers Conf., p. 69-74.
351. Sanders, N. D., and Schaefer, J. H. (1992). "A comparison of zeta potential distributions and colloid titration of papermaking materials: Particle surface charge vs. polyelectrolyte adsorption," Proc. TAPPI 1992 Papermakers Conf., 463-472.
352. Sanders, N. D., and Schaefer, J. H. (1994). "Comparison of electrophoretic mobility distributions in synthetic papermaking furnishes with streaming potential and polyelectrolyte titration data," Proc. TAPPI 1994 Papermakers Conf., 629-638.
353. Sanders, N. D., and Schaefer, J. H. (1995). "Comparing papermaking wet-end chargemeasuring techniques in kraft and groundwood systems," Tappi J. 78(11), 142-150.
354. Scallan, A. M. (1983). "The effect of acidic groups on the swelling of pulps: A review," Tappi J. 66(11), 73-75.
355. Scallan, A. M. (1989). "The electrical conductance of pulp suspensions," Tappi J. 72(11), 157-162.
356. Scallan, A. M., and Carles, J. E. (1972). "The correlation of the water retention value with the fiber saturation point," Svensk Papperstidn. 75(7), 699-703.
357. Scallan, A. M., and Tigerström, A. C. (1992). "Swelling and elasticity of the cell walls of pulp fibers," J. Pulp Paper Sci. 18(5), J188-J193.
358. Schempp, W. (1988). "Polyelectrolyte titration - zeta potention, a critical comparison," Wochenbl. Papierfabr. 116(20), 869-872.
359. Sczech, R., and Riegler, H. (2006). "Molecularly smooth cellulose surfaces for adhesion studies," J. Colloid Interface Sci. 301(2), 376-385.
360. Sennett, P., and Olivier, J. P. (1965). "Colloidal dispersion, electrokinetic effects and the concept of zeta potential," Indus. Eng. Chem. 57(8), 33-50.
361. Seth, R. S. (2003). "The measurement and significance of fines," Pulp Paper Can. 104(2), 41-44
362. Shen, W., and Parker, I. H. (1999). "Surface composition and surface energetics of various eucalypt pulps," Cellulose 6(1), 41-55.
363. Shirazi, M., van de Ven, T. G. M., and Garnier, G. (2003). "Adsorption of modified starches on pulp fibers," Langmuir 19(26), 10835-10842.
364. Sieber, R. (1922). "Colloidal chemistry problems of the paper and cellulose industry," Kolloid-Zeitschrift 31(5), 308-310.
365. Siffert, B., and Metzger, J. M. (1991). "Study of the interaction of titanium-dioxide with cellulose fibers in an aqueous-medium," Colloids Surf. 53(1-2), 79-99.
366. Sikora, M. D., and Stratton, R. A. (1981). "The shear stability of flocculated colloids," Tappi 64(11), 97-101.
367. Simončič, B., Černe, L., Tomšič, B., and Orel, B. (2008). "Surface properties of cellulose modified by imidazolidinone," Cellulose 15(1), 47-58.
368. Sjöberg. J., Kleen, M., Dahlman, O., Agnemo, R., and Sundvall, H. (2004). "Fiber surface composition and its relations to papermaking properties of sodaanthraquinone and kraft pulps," Nordic Pulp Paper Res. J. 19(3), 392-396.
369. nd Ed., Academic Press, San Diego.
370. Smook, G. A. (1992). Handbook for Pulp & Paper Technologists, 2nd Ed., Angus Wilde Publ., Vancouver.
371. Solberg, D., and Wågberg, L. (2003a). "On the mechanism of cationic-polyacrylamideinduced flocculation and re-dispersion of a pulp fiber dispersion," Nordic Pulp Paper Res. J. 18(1), 51-55.
372. Solberg, D., and Wagberg, L. (2003b). "Adsorption and flocculation behavior of cationic polyacrylamide and colloidal silica," Colloids Surf. A 219(1-3), 161-172.
373. Song, J. (2008). "Adsorption of amphoteric and nonionic polymers on model thin films," Ph.D. Thesis, North Carolina State University.
374. Springer, A. M., and Taggart, T. E. (1986). "Quantitative evaluation of alternative methods of determining total charge," Tappi J. 69(5), 116-121.
375. St. John, M. R., and Gallagher, T. M. (1992). "Evaluation of the charge state of papermachine systems using the charge titration method," Proc. 1992 TAPPI Papermakers Conf., TAPPI Press, Atlanta, 479-502.
376. Stana-Kleinschek, K., Kreze, T., Ribitsch, V., and Strnad, S. (2001). "Reactivity and electrokinetical properties of different types of regenerated cellulose fibres," Colloids Surf. A 195(1-3), 275-284.
377. Stana-Kleinschek, K., Pohar, C., and Ribitsch, V. (1995). "Adsorption of whitening agents on cellulose fibers - Monitored by streaming potential measurements, calorimetry and fluorescence," Colloid Polymer Sci. 273(12), 1174-1178.
378. Stana-Kleinschek, K., and Ribitsch, V. (1998). "Electrokinetic properties of processed cellulose fibers," Colloids Surf. A 140(1-3), 127-138.
379. Stana-Kleinschek, K., Ribitsch, V., Kreze, T., and Fras, L. (2002). "Determination of the adsorption character of cellulose fibres using surface tension and surface charge," Mater. Res. Innov. 6(1), 13-18.
380. Stana-Kleinschek, K., Strnad, S., and Ribitsch, V. (1999). "Surface characterization and adsorption abilities of cellulose fibers," Polymer Eng. Sci. 39(8), 1412-1424.
381. Stark, H., and Eichinger, R. (1989). "Effect of zeta potential on the adsorption tendency and degree of organization of fiber suspensions," Wochenbl. Papeirfabr. 117(11/12), 521-524.
382. Stenius, P., and Laine, J. (1994). "Studies of cellulose surfaces by titration and ESCA," Appl. Surf. Sci. 75, 213-219.
383. Stiernstedt, J., Brumer, H., Zhou, Q., Teeri, T. T., and Rutland, M. W. (2006a). "Friction between cellulose surfaces and effect of xyloglucan adsorption," Biomacromol. 7(7), 2147-2153.
384. Stiernstedt, J., Nordgren, N., Wågberg, L., Brumer, H, Gray, D. G., and Rutland, M. W. (2006b). "Friction and forces between cellulose model surfaces: A comparison," J. Colloid Interface Sci. 303(1), 117-123.
385. Stone, J. E., and Scallan, A. M. (1968). "A structural model for the cell wall of waterswollen wood pulp fibers based on their accessibility to macromolecules," Cellulose Chem. Technol. 2(3), 343-358.
386. Stratton, R. A. (1983). "Effect of agitation on polymer additives," Tappi J. 66(3), 141-144.
387. Strazdins, E. (1972). "Factors affecting the electrokinetic properties of cellulose fibers," Tappi 55(12), 1691-1695.
388. Strazdins, E. (1977). "Optimization of the papermaking process by electrophoresis," Tappi 60(7), 113-114.
389. Strazdins, E. (1980). "New approaches towards optimizing dry strength of waste paper containing stock furnishes," Papier 34(10A), V49-V55.
390. Strazdins, E. (1989). "Theoretical and practical aspects of alum use in papermaking," Nordic Pulp Paper Res. J. 4(2), 128-134.
391. Strazdins, E. (1994). "Application of electrokinetics in optimization of wet-end chemistry," in Wet-Strength Resins and the Application, L L. Chan, ed., TAPPI Press, Atlanta, 63-83.
392. Strazdins, E. (1995). "Critical issues in applying electrokinetics to papermaking," Tappi J. 78(8), 115-119.
393. Ström, G., and Kunnas, A. (1991). "The effect of cationic polymers on the water retention value of various pulps," Nordic Pulp Paper Res. J. 6(1), 12-19.
394. Sundberg, K., and Holmbom, B. (1997). "Destabilization of colloidal wood resin caused by cellulosic fibers in thermomechanical pulp suspensions," Paperi Puu 79(1), 50-54.
395. Sundberg, K. E., Sundberg, A. C., Thornton, J. W., and Holmbom, B. R. (1998). "Pectic acids in the production of wood-containing paper," Tappi J. 81(7), 131-136.
396. Suurnäkki, A., Heijnesson, A., Buchert, J., Viikari, L., and Westemark, U. (1996). "Chemical characterization of the surface layers of unbleached pine and birch kraft pulp fibers," J. Pulp Paper Sci. 22(2), J43-J47.
397. Swerin, A., Glad-Nordmark, G., and Ödberg, L. (1997b). "Adsorption and flocculation in suspensions by two cationic polymers - Simultaneous and sequential addition," J. Pulp Paper Sci. 23(8), J389-J393.
398. Swerin, A., and Ödberg, L. (1993). "Flocculation and floc strength in suspensions flocculated by retention aids," Nordic Pulp Paper Res. J. 8(1), 141-147.
399. Swerin, A., and Ödberg, L. (1997). "Some aspects of retention aids," in The Fundamentals of Papermaking Materials, C. F. Baker (ed.), Pira Intl., Leatherhead, UK, 265-350.
400. Swerin, A., Ödberg, L., and Lindström, T. (1990). "Deswelling of hardwood kraft pulp fibers by cationic polymers. The effect on wet pressing and sheet properties," Nordic Pulp Paper Res. J. 5(4), 188-196.
401. Swerin, A., Ödberg, L., and Wågberg, L. (1996b). "An extended model for the estimation of flocculation efficiency factors in multicomponent flocculation systems," Colloids Surf. 113(1-2), 25-38.
402. Swerin, A., Powell, R. L., and Ödberg, L. (1992). "Linear and nonlinear dynamic viscosity of pulp suspensions," Nordic Pulp Paper Res. J. 7(3), 126-132.
403. Swerin, A., Risinger, G., and Odberg, L. (1997a). "Flocculation in suspensions of microcrystalline cellulose by microparticle retention aid systems," J. Pulp Paper Sci. 23(8), J374-J381.
404. Tam Doo, P. A., Kerekes, R. J., and Pelton, R. H. (1984). "Estimates of maximum hydrodynamic shear stresses on fiber surfaces in papermaking," J. Pulp Paper Sci. 10(7), J80-J88.
405. Tammelin, T., Johnsen, I. A., Österberg, M., Stenius, P., and Laine, J. (2007). "Adsorption of colloidal extractives and dissolved hemicelluloses on thermomechanical pulp fiber components studied by QCM-D," Nordic Pulp Paper Res. J. 22(1), 93-101.
406. Tammelin, T., Österberg, M., Johansson, L-S., and Laine, J. (2006). "Preparation of lignin and extractive model surfaces using spincoating technique - Application for QCM-D studies," Nordic Pulp Paper Research Journal 21(4), 444-450.
407. Tammelin, T., Saarinen, T., Österberg, M., and Laine, J. (2005). "Preparation of Langmuir/Blodgett cellulose surfaces by using horizontal dipping procedure.Application for polyelectrolyte adsorption studies performed with QCM-D," Cellulose 13(5), 519-535.
408. nd Ed., Surfactant Science Ser. 76, Marcel Dekker, New York, Ch. 19, 389-404.
409. Tanaka, H., Swerin, A., and Ödberg, L. (1993). "Transfer of cationic retention aid from fibers to fine particles and cleavage of polymer chains under wet-end papermaking conditions," Tappi J. 76(5), 157-163.
410. Tanaka, H., Ueda, I., Ichiura, H., and Kitaoka, T. (2000). "Determining cationic demand of suspensions using chromo-PDADMAC," Proc. Intl. Symp. Environ. Friendly Emerging Technol. Sustainable Pulp Paper Ind., TFRI Extension Ser. 115, 68-71.
411. Terayama, H. (1952). "Method of colloid titration (A new titration between polymer ions)," J. Polym. Sci. 8(2), 243-253.
412. Theander, K., Pugh, R. J., and Rutland, M. W. (2005). "Friction force measurements relevant to de-inking by means of atomic force microscope," J. Colloid Interface Sci. 291(2), 361-368.
413. Thiele, B., and Kopp, J. W. (1997). "Ladundsbilanzen von Papiermachinen-Systemen - ein Weg zur Prozeßoptimierung," Wochbl. Papierfabr. 125(11/12), 542-556.
414. Thode, E., and Ingmanson, W. L. (1959). "Factors contributing to the strength of a sheet of paper. I. External specific surface and swollen specific volume," Tappi 42(1), 74-83.
415. Tiberg, F., Daicic, J., and Fröberg, J. (2001). "Surface chemistry of paper," in Holmberg, K. (ed.), Handbook of Applied Surface and Colloid Chemistry, Wiley, New York, Ch. 7, 123-173.
416. Torn, L. H., Koopal, L. K., de Keizer, A., and Lyklema, J. (2005). "Adsorption of nonionic surfactants on cellulose surfaces: Adsorbed amounts and kinetics," Langmuir 21(17), 7768-7775.
417. Touchette, R. V., and Jenness, L. C. (1960). "Effect of surface active agents on drainage and physical strength properties of sulfite pulp," Tappi 43(5), 484-489.
418. Tripattharanan, T., Hubbe, M.A., Venditti, R.A., and Heitmann, J.A. (2004a). "Effect of idealized flow conditions on retention aid performance. 1. Cationic acrylamide copolymer," Appita J. 57(5), 404-410.
419. Tripattharanan, T., Hubbe, M. A., Heitmann, J. A., and Venditti, R. A. (2004b). "Effect of idealized flow conditions on retention aid performance. Part 2: Polymer bridging, charged patches, and charge neutralization," Appita J. 57(6), 448-454.
420. Turon, X., Rojas, O. J., and Deinhammer, R. S. (2008). "Enzymatic kinetics of cellulose hydrolysis: A QCM-D study," Langmuir 24(8), 3880-3887.
421. Tze, W. T. Y., Gardner, D. J., Tripp, C. P., and O'Neill, S. C. (2006). "Cellulose fiber/polymer adhesion: Effects of fiber/matrix interfacial chemistry on the micromechanics of the interphase," J. Adhesion Sci. Technol. 20(15), 1649-1668.
422. Unbehend, J. E. (1976). "Mechanisms of 'soft' and 'hard' floc formation in dynamic retention measurement," Tappi 59(10), 74-77.
423. van de Steeg, T. G. M., Cohen Stuart, M. A., de Keizer, A., and Bijsterbosch, B. H. (1992). "Polyelectrolyte adsorption: A subtle balance of forces," Langmuir 8(10), 2538-2546.
424. van de Steeg, H. G. M., de Keizer, A., Cohen Stuart, M. A., and Bijsterbosch, B. H. (1993a). "Adsorption of cationic amylopectin on microcrystalline cellulose," Colloids Surf. A 70(1), 77-89.
425. van de Steeg, H. G. M., de Keizer, A., Cohen Stuart, M. A., and Bijsterbosch, B. H. (1993b). "Adsorption of cationic potato starch on microcrystalline cellulose," Colloids Surf. A 70(1), 91-103.
426. van de Steeg, H. G. M., de Keizer, A., Cohen Stuart, M. A., and Bijsterbosch, B. H. (1993c). "Adsorption of cationic starches on microcrystalline cellulose," Nordic Pulp Paper Res. J. 8(1), 34-40.
427. van de Ven, T. G. M. (1999). "Effect of fibre conductivity on zeta potential measurements of pulp fibres," J. Pulp Paper Sci. 25(7), 243-245.
428. van de Ven, T. G. M. (2000). "A model for the adsorption of polyelectrolytes on pulp fibers: Relation between fiber structure and polyelectrolyte properties," Nordic Pulp Paper Res. J. 15(5), 494-501.
429. van de Ven, T. G. M., and Alince, B. (1996). "Association-induced polymer bridging: New insights into the reteniton of fillers with PEO," J. Pulp Paper Sci. 22(7), J257-J263.
430. van de Ven, T. G. M., and Mason, S. G. (1981). "Comparison of hydrodynamic and colloidal forces in paper machine headboxes," Tappi 64(9), 171-175.
431. van de Ven, T. G. M., Saint-Cry, K., and Allix, M. (2007). "Adsorption of toluidine blue on pulp fibers," Colloids Surf. A. 294(1-3), 1-7.
432. Vanderhoek, N. (1994). "Optimizing paper machine performance through electrokinetic measurement," Appita J. 47(5), 397-401.
433. van der Waals, J. D. (1910). "The equation of state for gases and liquids," Nobel Lecture, December 12.
434. Vanerek, A., and van de Ven, T. G. M. (2006). "Coacervate complex formation between cationic polyacrylamide and anionic sulfonated kraft lignin," Colloids Surf. A 273(1-2), 55-62.
435. Varoqui, R. (1982). "Effect of polymer adsorption on the electrophoretic mobility of cellulose," Nouv. J. Chimie 6(4), 187-189.
436. Verwey, E. J. W., and Overbeek, J. Th. G. (1948). Theory of the Stability of Lyophobic Colloids, Elsevier, New York.
437. Visser, J. (1972). "On Hamaker constants: A comparison between Hamaker constants and Lifshitz-van der Waals constants," Adv. Colloid Interface Sci. 3(4), 331-364.
438. Visser, J. (1995). "Particle adhesion and removal: A review," Particulate Sci. Technol. 13(3-4), 169-196.
439. Wågberg, L. (2000). "Polyelectrolyte adsorption onto cellulose fibers - A review," Nordic Pulp Paper Res. J. 15(5), 586-597.
440. Wågberg, L., and Åsell, I. (1995). "The action of cationic polymers in the fixation of dissolved and colloidal substances. 2," Colloids Surf. A 104(2-3), 169-184.
441. Wågberg, L., Forsberg, S., Johansson, A., and Juntti, P. (2002). "Engineering of fiber surface properties by application of polyelectrolyte multilayer concept. Part 1. Modification of paper strength," J. Pulp Paper Sci. 28(7), 222-228.
442. Wågberg, L., and Kolar, K. (1996). "Adsorption of cationic starch on fibres from mechanical pulps," Berichte Bunsen-Geselsch. Phys. Chem. Chem. Phys. 100(6), 984-993.
443. Wågberg, L., and Ödberg, L. (1989). "Polymer adsorption on cellulosic fibers," Nordic Pulp Paper Res. J. 4(2), 135-140.
444. Wågberg, L., Ödberg, L., and Glad-Nordmark, G. (1989). "Charge determination of porous substrates by polyelectrolyte adsorption. Part 1. Carboxymethylated, bleached cellulosic fibers," Nordic Pulp Paper Res. J. 4(2), 71-76.
445. Walkush, J. C., and Williams, D. G. (1974). "The coagulation of cellulose pulp fibers and fines as a mechanism of retention," Tappi 57(1), 112-116.
446. Wang, F., and Hubbe, M. A. (2001). "Development and evaluation of an automated streaming potential measurement device," Colloids Surf. A 194(1-3), 221-232.
447. Wang, F., and Hubbe, M. A. (2002). "Charge properties of fibers in the paper mill environment. Part 1: Effect of electrical conductivity," J. Pulp Paper Sci. 28(10), 347-353.
448. Wang, W., and Chase, G. G. (2004). "Effects of pH and alum concentrations on TiO2 capture on cellulose during co-filtration," J. Chinese Inst. Chem. Eng. 35(1), 5-16.
449. Wang, X. H. (2002). "Surface and colloid chemistry of papermaking," Encyc. Surface Colloid Sci. 4, 4936-4961.
450. Watanabe, A., Morita, S., and Ozaki, Y. (2006). "A study on water adsorption onto microcrystalline cellulose by near-infrared spectroscopy with two-dimensional correlation spectroscopy and principal component analysis," Applied Spectroscopy 60(9), 1054-1061.
451. Wege, H. A., Kim, S., Paunov, V. N., Zhong, Q., and Velev, O. D. (2008). "Long-term stabilization of foams and emulsions with in-situ formed microparticles from hydrophobic cellulose," Langmuir 24(17), 9245-9253.
452. Weise, U., Maloney, T., and Paulapuro, H. (1996). "Quantification of water in different states of interaction with wood pulp fibers," Cellulose 3(4), 189-202.
453. Werner, C., and Jacobasch, H. J. (1996). "Surface characterization of hemodialysis membranes based on electrokinetic measurements," Macromol. Symp. 103, 43-54.
454. Werner, C., Konig, U., Augsburg, A., Arnhold, C., Korber, H., Zimmermann, R., and Jacobasch, H. J. (1999). "Electrokinetic surface characterization of biomedical polymers - A survey," Colloids Surf. A 159(2-3), 519-529.
455. Whipple, W. L., and Maltesh, C. (2002). "Adsorption of cationic flocculants to paper slurries," J. Colloid Interface Sci. 256(1), 33-40.
456. Wiegel, F. W. (1977). "Adsorption of a macromolecules to a charged surface," J. Phys. A., Math. Gen. 10, 299-303.
457. Wiese, G., and Healy, T. W. (1970). "Effect of particle size on colloid stability," Trans. Faraday Soc. 566, 490-499.
458. Willing, G. A., Ibrahim, T. H., Etzler, F. M., and Neuman, R. D. (2000). "New approach to the study of particle-surface adhesion using atomic force microscopy," Journal Colloid Interface Science 226(1), 185-188.
459. Willing, G. A., and Neuman, R. D. (2002). "Analysis of asperity-asperity adhesion forces utilizing statistical analysis techniques and the force selectivity of the scanning probe microscope," Langmuir 18(22), 8370-8374.
460. Winters, J. C. (1998). "Introduction to the electrokinetics of papermaking," in J. M. Gess (ed.), Retention of Fines and Fillers during Papermaking, TAPPI Press, Atlanta, Ch. 3, 29-50.
461. Wu, M. R., Paris, J., and van de Ven, T. G. M. (2007). "Flocculation of papermaking fines by poly(ethylene oxide) and various cofactors: Effects of PEO entanglement, salt and fines properties," Colloids Surf. A 303(3), 211-218.
462. Xiao, H., Pelton, R., and Hamielec, A. (1996). "Retention mechanisms for twocomponent systems based on phenolic resins and PEO or new PEO-copolymer retention aids," J. Pulp Paper Sci. 22(12), J475-J485.
463. Yaginuma, Y., and Kijima, T. (2006). "Effect of pH on rheological properties of microcrystalline cellulose dispersions," J. Dispersion Sci. Technol. 27(3), 365-370.
464. Yoon, S. H. (2007). "Analysis on adsorption equilibrium of polyamide-epichlorhydrin in aqueous fibrous suspension by colloid titration," J. Industrial Eng. Chem. 13(3), 345-351.
465. Yoon, D.-H., and Park, J.-M. (2005). "Fibers flocculation and physical property changes of paper depending on cationic polymer addition," Palpu Chongi Gisul 37(1), 10-16.
466. Zauscher, S., and Klingenberg, D. J. (2000a). "Normal forces between cellulose surfaces measured with colloidal probe microscopy," J. Colloid Interface Sci. 229(2), 497-510.
467. Zauscher, S., and Klingenberg, D. J. (2000b). "Surface and friction forces between cellulose surfaces measured with colloidal probe microscopy," Nordic Pulp Paper Res. J. 15(5), 459-468.
468. Zauscher, S., and Klingenberg, D. J. (2001). "Friction between cellulose surfaces measured with colloidal probe microscopy," Colloids Surf. A 178(1-3), 213-229.
469. Zemljic, L. F., Persin, Z., Stenius, P., and Kleinschek, K. S. (2008). "Carboxyl groups in pre-treated regenerated cellulose fibres," Cellulose 15(5), 681-690.
470. Zhang, J., Pelton, R. H., Wågberg, L., and Rundlöf, M. (2000). "The effect of charge density and hydrophobic modification on dextran-based paper strength enhancing polymers," Nordic Pulp Paper Res. J. 15(5), 440-445.
471. Zheng, Z., McDonald, J., Khillan, R., Shutava, T., Grozdits, G., and Lvov, Y. (2006). "Layer-by-layer nanocoating of lignocellulose fibers for enhanced paper properties," J. Nanoscience Nanotechnology 6, 624-632.
472. Zhou, Q., Rutland, M. W., Teeri, T. T., and Brumer, H. (2007). "Xyloglucan in cellulose modification," Cellulose 14(6), 625-641.