Regime map development for continuous twin screw granulation

Chemical Engineering Science

Volumn 87, Issue , 2013, Pages 315-326

  Tu, Wei Da ^a   Ingram, Andy ^b   Seville, Jonathan ^c  

^a INDUSTRIAL TECHNOLOGY RESEARCH INSTITUTE   (Taiwan)

^b UNIVERSITY OF BIRMINGHAM   (United Kingdom)

^c UNIVERSITY OF SURREY   (United Kingdom)

Author keywords

Agglomeration; Extrusion; Mixing; Powders; Regime map; Twin screw granulation

Indexed keywords

AGGLOMERATION; EXTRUSION; GEOMETRY; MIXING; POLYETHYLENE GLYCOLS; POWDERS; SHEAR FLOW; SIZE DISTRIBUTION;

BATCH GRANULATION; GRANULE PROPERTIES; GRANULE SIZE; GRANULE SIZE DISTRIBUTION; HIGH SHEAR; MICROCRYSTALLINE CELLULOSE; OPERATING CONDITION; POWDERED SOLIDS; REGIME MAP; SCREW SPEED; TWIN SCREW; TWIN SCREW EXTRUDERS; TWO-REGIME; WET GRANULATION;

GRANULATION;

EID: 84869861612     PISSN: 00092509     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ces.2012.08.015     Document Type: Article

References (24)

1. Blair A.S. Dust explosion incidents and regulations in the United States. J. Loss Prev. Process Ind. 2007, 20:523-529.
2. Bi C., Jiang B., Li A. Digital image processing method for measuring the residence time distribution in a plasticating extruder. Polym. Eng. Sci. 2007, 47:1108-1113.
3. Darelius A., Rasmuson A., Bjn I.N., Folestad S. High shear wet granulation modelling-a mechanistic approach using population balances. Powder Technol. 2005, 160:209-218.
4. Ennis B.J., Tardos G., Pfeffer R. A microlevel-based characterization of granulation phenomena. Powder Technol. 1991, 65:257-272.
5. Gamlen M.J., Eardley C. Continuous extrusion using a Baker Perkins MP50 (Multipurpose) extruder. Drug Dev. Ind. Pharm. 1986, 12:1701-1713.
6. Hoornaert F., Wauters P.A.L., Meesters G.M.H., Pratsinis S.E., Scarlett B. Agglomeration behaviour of powders in a Lodige mixer granulator. Powder Technol. 1998, 96:116-128.
7. Keleb E.I., Vermeire A., Vervaet C., Remon J.P. Twin screw granulation as a simple and efficient tool for continuous wet granulation. Int. J. Pharm. 2004, 273:183-194.
8. Keleb E.I., Vermeire A., Vervaet C., Remon J.P. Continuous twin screw extrusion for the wet granulation of lactose. Int. J. Pharm. 2002, 239:69-80.
9. Kleinebudde P., Lindner H. Experiments with an instrumented twin-screw extruder using a single-step granulation/extrusion process. Int. J. Pharm. 1993, 94:49-58.
10. Keleb E.I., Vermeire A., Vervaet C., Remon J.P. Cold extrusion as a continuous single-step granulation and tabletting process. Eur. J. Pharm. Biopharm. 2001, 52:359-368.
11. Kumar A., Ganjyal G.M., Jones D.D., Hanna M.A. Digital image processing for measurement of residence time distribution in a laboratory extruder. J. Food Eng. 2006, 75:237-244.
12. Knight P.C., Instone T., Pearson J.M.K., Hounslow M.J. An investigation into the kinetics of liquid distribution and growth in high shear mixer agglomeration. Powder Technol. 1998, 97:246-257.
13. Lindberg N.O., Tufvesson C., Olbjer L. Extrusion of an effervescent granulation with twin extruder Baker Perkins MPF 50 D. Drug Dev. Ind. Pharm. 1987, 13:1891-1913.
14. Lindberg N.O., Tufvesson C., Holm P., Olbjer L. Extrusion of an effervescent granulation with twin screw extruder, Baker Perkins MPF 50 D. Influence on intra-granular porosity and liquid saturation. Drug Dev. Ind. Pharm. 1988, 14:1791-1798.
15. Nakamichi K., Nakano T., Yasuura H., Izumi S., Kawashima Y. Stabilization of sodium guaiazulene sulfonate in granules for tableting prepared using a twin-screw extruder. Eur. J. Pharm. Biopharm. 2003, 56:347-354.
16. Rhodes M. Introduction to Particle Technology 1998, John Wiley & Sons.
17. Rough S.L., Wilson D.I., York D.W. A regime map for stages in high shear mixer agglomeration using ultra-high viscosity binders. Adv. Powder Technol. 2005, 16:373-386.
18. Schmidt C., Kleinebudde P. Comparison between a twin-screw extruder and a rotary ring die press. Part II: influence of process variables. Eur. J. Pharm. Biopharm. 1998, 45:173-179.
19. Tu W.D., Ingram A., Seville J.P.K., Hsiau S.S. Exploring the regime map for high-shear mixer granulation. Chem. Eng. J. 2009, 145:505-513.
20. Tardos G.I., Khan M.I., Mort P.R. Critical parameters and limiting conditions in binder granulation of fine powders. Powder Technol. 1997, 94:245-258.
21. Tu W.D., Hsiau S.S., Ingram A., Seville J. The effect of powder size on induction behaviour and binder distribution during high shear melt agglomeration of calcium carbonate. Powder Technol. 2008, 184:298-312.
22. Van Melkebeke B., Vermeulen B., Vervaet C., Remon J.P. Melt granulation using a twin-screw extruder: a case study. Int. J. Pharm. 2006, 326:89-93.
23. Wauters P.A.L., van de Water R., Litster J.D., Meesters G.M.H., Scarlett B. Growth and compaction behaviour of copper concentrate granules in a rotating drum. Powder Technol. 2002, 124:230-237.
24. Weinmann M. Masterbatch production on co-rotating twin screw extruders. Plast. Addit. Compd. 2007, 9:36-39.