DSP-based control of sensorless IPMSM drives for wide-speed-range operation

IEEE Transactions on Industrial Electronics

Volumn 60, Issue 2, 2013, Pages 720-727

  Wang, Gaolin ^a   Yang, Rongfeng ^a   Xu, Dianguo ^a  

^a HARBIN INSTITUTE OF TECHNOLOGY   (China)

Author keywords

Digital control; interior permanent magnet synchronous motor (IPMSM) drive; position sensorless; wide speed range operation

Indexed keywords

DIGITAL CONTROL SYSTEMS; ELECTROMOTIVE FORCE; ESTIMATION; PHASE LOCKED LOOPS; SIGNAL PROCESSING; SYNCHRONOUS MOTORS;

CONTROL STRATEGIES; DEAD-TIME COMPENSATION STRATEGY; DIGITAL CONTROL; DSP-BASED; HIGH FREQUENCY SIGNALS; HIGH-SPEED; HYBRID POSITION; INTERIOR PERMANENT MAGNET SYNCHRONOUS MOTOR DRIVES; LOAD DISTURBANCES; POSITION ESTIMATION; POSITION SENSORLESS; POSITION SENSORLESS CONTROL; ROTOR POSITION; SENSOR LESS CONTROL; SENSORLESS; SENSORLESS OPERATION; SLIDING-MODE OBSERVER; SOFTWARE PHASE-LOCKED LOOP; VOLTAGE SIGNALS; WIDE-SPEED-RANGE OPERATION;

PERMANENT MAGNETS;

EID: 84866525673     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2012.2205360     Document Type: Article

References (35)

1. R. Wrobel, A. S. Budden, D. Salt, D. Holliday, P. H. Mellor, A. Dinu, and P. Sangha, "Rotor design for sensorless position estimation in permanentmagnet machines," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 3815- 3824, Sep. 2011.
2. P. Sergeant, F. De Belie, and J. Melkebeek, "Rotor geometry design of interior PMSMs with and without flux barriers for more accurate sensorless control," IEEE Trans. Ind. Electron., vol. 59, no. 6, pp. 2457-2465, Jun. 2012.
3. R. Dutta andM. F. Rahman, "Design and analysis of an interior permanent magnet (IPM) machine with very wide constant power operation range," IEEE Trans. Energy Convers., vol. 23, no. 1, pp. 25-33, Mar. 2008. (Pubitemid 351392295)
4. I. Boldea, M. C. Paicu, G. D. Andreescu, and F. Blaabjerg, "Active flux DTFC-SVM sensorless control of IPMSM," IEEE Trans. Energy Convers., vol. 24, no. 2, pp. 314-322, Jun. 2009.
5. Z. Q. Chen, M. Tomita, S. Doki, and S. Okuma, "An extended electromotive force model for sensorless control of interior permanent magnet synchronous motors," IEEE Trans. Ind. Electron., vol. 50, no. 2, pp. 288- 295, Apr. 2003.
6. A. Ghaderi and T. Hanamoto, "Wide-speed-range sensorless vector control of synchronous reluctance motors based on extended programmable cascaded low-pass filters," IEEE Trans. Ind. Electron., vol. 58, no. 6, pp. 2322-2333, Jun. 2011.
7. F. Genduso, R. Miceli, C. Rando, and G. R. Galluzzo, "Back EMF sensorless-control algorithm for high-dynamic performance PMSM," IEEE Trans. Ind. Appl., vol. 57, no. 6, pp. 2092-2100, Jun. 2010.
8. S. Chi, Z. Zhang, and L. Y. Xu, "Sliding-mode sensorless control of directdrive PM synchronous motors for washing machine applications," IEEE Trans. Ind. Electron., vol. 45, no. 2, pp. 582-590, Mar./Apr. 2009.
9. M. L. Corradini, G. Ippoliti, S. Longhi, and G. Orlando, "A quasisliding mode approach for robust control and speed estimation of PM synchronous motors," IEEE Trans. Ind. Electron., vol. 59, no. 2, pp. 1096- 1104, Feb. 2012.
10. H. Kim, J. Son, and J. Lee, "A high-speed sliding-mode observer for the sensorless speed control of a PMSM," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4069-4077, Sep. 2011.
11. A. Sabanovic, "Variable structure systems with sliding modes in motion control - A survey," IEEE Trans. Ind. Informat., vol. 7, no. 2, pp. 212- 223, May 2011.
12. Z. Q. Zhu and L. M. Gong, "Investigation of effectiveness of sensorless operation in carrier-signal-injection-based sensorless-control methods," IEEE Trans. Ind. Electron., vol. 58, no. 8, pp. 3431-3439, Aug. 2011.
13. D. Raca, M. C. Harke, and R. D. Lorenz, "Robust magnet polarity estimation for initialization of PM synchronous machines with nearzero saliency," IEEE Trans. Ind. Appl., vol. 44, no. 4, pp. 1199-1209, Jul./Aug. 2008.
14. P. Garcia, F. Briz, M. W. Degner, and D. Diaz-Reigosa, "Accuracy, bandwidth and stability limits of carrier-signal-injection-based sensorless control methods," IEEE Trans. Ind. Appl., vol. 43, no. 3, pp. 990-1000, Jun./Aug. 2007. (Pubitemid 47249972)
15. J. H. Jang, S. K. Sul, J. I. Ha, K. Ide, and M. Sawamura, "Sensorless drive of surface-mounted permanent-magnet motor by high-frequency signal injection based on magnetic saliency," IEEE Trans. Ind. Appl., vol. 39, no. 4, pp. 1031-1039, Jul./Aug. 2003.
16. N. Bianchi, S. Bolognani, J. H. Jang, and S. K. Sul, "Advantages of inset PM machines for zero-speed sensorless position detection," IEEE Trans. Ind. Appl., vol. 44, no. 4, pp. 1190-1198, Jul./Aug. 2008.
17. A. Accetta, M. Cirrincione, M. Pucci, and G. Vitale, "Sensorless control of PMSM fractional horsepower drives by signal injection and neural adaptive-band filtering," IEEE Trans. Ind. Electron., vol. 59, no. 3, pp. 1355-1366, Mar. 2012.
18. R. Leidhold, "Position sensorless control of PM synchronous motors based on zero-sequence carrier injection," IEEE Trans. Ind. Electron., vol. 58, no. 12, pp. 5371-5379, Dec. 2011.
19. G. D. Andreescu, C. I. Pitic, F. Blaabjerg, and I. Boldea, "Combined flux observer with signal injection enhancement for wide speed range sensorless direct torque control of IPMSM drives," IEEE Trans. Energy Convers., vol. 23, no. 2, pp. 393-402, Jun. 2008. (Pubitemid 351728780)
20. A. Piippo, M. Hinkkanen, and J. Luomi, "Analysis of an adaptive observer for sensorless control of interior permanent magnet synchronous motors," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 570-576, Feb. 2008. (Pubitemid 351344230)
21. S. Sayeef, G. Foo, and M. F. Rahman, "Rotor position and speed estimation of a variable structure direct-torque-controlled IPM synchronous motor drive at very low speeds including standstill," IEEE Trans. Ind. Electron., vol. 57, no. 11, pp. 3715-3723, Nov. 2010.
22. G. Foo and M. F. Rahman, "Sensorless sliding-mode MTPA control of an IPM synchronous motor drive using a sliding-mode observer and HF signal injection," IEEE Trans. Ind. Electron., vol. 57, no. 4, pp. 1270- 1278, Apr. 2010.
23. A. Malinowski and Y. Hao, "Comparison of embedded system design for industrial application," IEEE Trans. Ind. Informat., vol. 7, no. 2, pp. 244- 254, May 2011.
24. T. Orlowska-Kowalska and M. Kaminski, "FPGA implementation of the multilayer neural network for the speed estimation of the two-mass drive system," IEEE Trans. Ind. Informat., vol. 7, no. 3, pp. 436-445, Aug. 2011.
25. M. P. Kazmierkowski, M. Jasinski, and G. Wrona, "DSP-based control of grid-connected power converters operating under grid distortions," IEEE Trans. Ind. Informat., vol. 7, no. 2, pp. 204-211, May 2011.
26. M. Bertoluzzo and G. Buja, "Development of electric propulsion systems for light electric vehicles," IEEE Trans. Ind. Informat., vol. 7, no. 3, pp. 428-435, Aug. 2011.
27. C. Buccella, C. Cecati, and H. Latafat, "Digital control of power converters - A survey," IEEE Trans. Ind. Informat., vol. 8, no. 3, pp. 437- 447, Aug. 2012.
28. V. Delli Colli, R. Di Stefano, and F. Marignetti, "A system-on-chip sensorless control for a permanent-magnet synchronous motor," IEEE Trans. Ind. Electron., vol. 57, no. 11, pp. 3822-3829, Nov. 2010.
29. A. Agarwal and V. Agarwal, "FPGA realization of trapezoidal PWM for generalized frequency converter," IEEE Trans. Ind. Informat., vol. 8, no. 3, pp. 501-510, Aug. 2012.
30. B. Alecsa, M. N. Cirstea, and A. Onea, "Simulink modeling and design of an efficient hardware-constrained FPGA-based PMSM speed controller," IEEE Trans. Ind. Informat., vol. 8, no. 3, pp. 554-562, Aug. 2012.
31. M. Hamouda, H. F. Blanchette, K. Al-Haddad, and F. Fnaiech, "An efficient DSP-FPGA-based real-time implementation method of SVM algorithms for an indirect matrix converter," IEEE Trans. Ind. Electron., vol. 58, no. 11, pp. 5024-5031, Nov. 2011.
32. E. Monmasson, L. Idkhajine, M. N. Cirstea, I. Bahri, A. Tisan, and M. W. Naouar, "FPGAs in industrial control applications," IEEE Trans. Ind. Informat., vol. 7, no. 2, pp. 224-243, May 2011.
33. A. Al Nabulsi and R. Dhaouadi, "Efficiency optimization of a DSP-based standalone PV system using fuzzy logic and dual-MPPT control," IEEE Trans. Ind. Informat., vol. 8, no. 3, pp. 573-584, Aug. 2012.
34. D. O. Neacsu, "Novel microcontrollers with direct access to flash memory benefit implementation of multi-optimal space vector modulation," IEEE Trans. Ind. Informat., vol. 8, no. 3, pp. 528-535, Aug. 2012.
35. T. Atalik, M. Deniz, E. Koc, C. O. Gercek, B. Gultekin, M. Ermis, and I. Cadirci, "Multi-DSP and -FPGA based fully-digital control system for cascaded multilevel converters used in FACTS applications," IEEE Trans. Ind. Informat., vol. 8, no. 3, pp. 511-527, Aug. 2012.