Advantages of inset PM machines for zero-speed sensorless position detection

IEEE Transactions on Industry Applications

Volumn 44, Issue 4, 2008, Pages 1190-1198

  Bianchi, Nicola ^a   Bolognani, Silverio ^a   Jang, Ji Hoon ^b   Sul, Seung Ki ^c  

^a UNIVERSITY OF PADOVA   (Italy)

^b Hyundai Motor Co   (South Korea)

^c Seoul National University   (South Korea)

Author keywords

High frequency signal injection; Low speed sensorless control; Motor design optimization; Permanent magnet (PM) machine; Zero speed sensorless control

Indexed keywords

ANISOTROPY; CRYSTALLOGRAPHY; INDUCTION MOTORS; MOTORS; POWDER METALLURGY; SPEED;

CROSS COUPLINGS; HIGH FREQUENCIES; HIGH-FREQUENCY CURRENTS; HIGH-FREQUENCY SIGNAL INJECTION; LOW-SPEED SENSORLESS CONTROL; MOTOR DESIGN OPTIMIZATION; MOTOR SPEEDS; OPERATING CONDITIONS; PERMANENT-MAGNET (PM) MACHINE; PERMANENT-MAGNET MOTORS; PM MACHINES; PM MOTORS; POSITION DETECTION; ROTOR ANISOTROPY; ROTOR POSITION DETECTION; ROTOR POSITIONS; SENSOR LESS CONTROL; SENSOR-LESS; SPEED SENSOR-LESS; STATOR VOLTAGES; ZERO-SPEED SENSORLESS CONTROL;

PERMANENT MAGNETS;

EID: 49249118792     PISSN: 00939994     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIA.2008.926203     Document Type: Article

References (30)

1. A. Kulkarni and M. Ehsani, "A novel position sensor elimination technique for interior permanent-magnet synchronous drive," IEEE Trans. Ind. Appl., vol. 28, no. 1, pp. 144-150, Jan./Feb. 1992.
2. J. Kim and S. Sul, "New standstill position detection strategy for PMSM drive without rotational transducers," in Proc. IEEE APEC, Jun. 1994, pp. 363-369.
3. S. Ogasawara and H. Akagi, "An approach to real-time position estimation at zero and low speed for a PM motor based on saliency," IEEE Trans. Ind. Appl., vol. 34, no. 1, pp. 163-168, Jan./Feb. 1998.
4. Y. Jeong, R. Lorenz, T. Jahns, and S. Sul, "Initial rotor position estimation of an IPM synchronous machine using carrier-frequency injection methods," IEEE Trans. Ind. Appl., vol. 40, no. 1, pp. 38-45, Jan./Feb. 2005.
5. N. Bianchi, S. Bolognani, and M. Zigliotto, "Design hints of an IPM synchronous motor for an effective position sensorless control," in Proc. IEEE PESC, Recife, Brazil, Jun. 12-16, 2005, pp. 1560-1566.
6. S. Morimoto, K. Kawamoto, M. Sanada, and Y. Takeda, "Sensorless control strategy for salient-pole PMSM based on extended EMF in rotating reference frame," IEEE Trans. Ind. Appl., vol. 38, no. 4, pp. 1054-1061, Jul./Aug. 2002.
7. S. Bolognani, M. Zigliotto, and M. Zordan, "Extended-range PMSM sensorless speed drive based on stochastic filtering," IEEE Trans. Power Electron., vol. 16, no. 1, pp. 110-117, Jan. 2001.
8. N. Patel, T. O'Meara, J. Nagashima, and R. Lorenz, "Encoderless interior permanent magnet traction drive for electrical and hybrid electrical vehicles," in Conf. Rec. IEEE IAS Amin. Meeting, Sep. 30-Oct. 5, 2001, pp. 1703-1707.
9. A. Vagati, M. Pastorelli, and G. Franceschini, "Effect of cross-coupling in synchronous reluctance motors," in Proc. Intell. Motion Conf., 1997, pp. 279-285.
10. A. Vagati, M. Pastorelli, G. Franceschini, and S. Petrache, "Design of low-torque-ripple synchronous reluctance motors," IEEE Trans. Ind. Appl., vol. 34, no. 4, pp. 758-765, Jul./Aug. 1998.
11. A. Vagati, M. Pastorelli, G. Franceschini, and F. Scapino, "Impact of cross saturation in synchronous reluctance motors of transverse-laminated type," IEEE Trans. Ind. Appl., vol. 36, no. 4, pp. 1039-1046, Jul./Aug. 2000.
12. J. K. Chung and S. Sul, "Initial rotor position detection of PMSM at standstill without rotational transducer," in Proc. IEEE IEMDC, May 1999, pp. 785-787.
13. N. Bianchi, "Analysis of the IPM motor - Part I: Analytical approach, in design, analysis, and control of interior PM synchronous machines," in Conf. Rec. IEEE IAS Amin. Meeting, Seattle, WA, N. Bianchi and T. M. Jahns, Eds., Oct. 3, 2005, pp. 3.1-3.33. IEEE IAS Tutorial Course Notes.
14. N. Bianchi, Electrical Machine Analysis using Finite Elements, ser. Power Electronics and Applications Series. Boca Raton, FL: CRC Press, 2005.
15. B. Brunsbach, G. Henneberger, and T. Klepsch, "Position controlled, permanent excited synchronous motor without mechanical sensors," in Proc. EPE Conf., Brighton, U.K., Sep. 1993, pp. 38-43.
16. P. Jansen and R. Lorenz, "Transducerless field orientation concepts employing saturation-induced saliencies in induction machines," IEEE Trans. Ind. Appl., vol. 32, no. 6, pp. 1380-1393, Nov./Dec. 1996.
17. A. Consoli, G. Scarcella, and A. Testa, "Sensorless control of PM synchronous motors at zero speed," in Conf. Rec. 34th IEEE IAS Annu. Meeting. Phoenix, AZ, Oct. 3-7, 1999, vol. 2, pp. 1033-1040.
18. A. Consoli, G. Scarcella, and A. Testa, "A new zero frequency flux position detection approach for direct field oriented control drives," IEEE Trans. Ind. Appl., vol. 36, no. 3, pp. 797-804, May/Jun. 2000.
19. F. Briz, A. Diez, and M. Degner, "Dynamic operation of carrier signal injection based sensorless, direct field oriented AC drives," IEEE Trans. Ind. Appl., vol. 36, no. 5, pp. 1360-1368, Sep./Oct. 2000.
20. J. Ha, K. Ide, T. Sawa, and S. Sul, "Sensorless rotor position estimation of an interior permanent-magnet motor from initial states," IEEE Trans. Ind. Appl., vol. 39, no. 3, pp. 761-767, May 2003.
21. J. Jang, J. Ha, M. Ohio, K. Ide, and S. Sul, "Analysis of permanent magnet machine for sensorless control based on high frequency signal injection," IEEE Trans. Ind. Appl., vol. 40, no. 6, pp. 1595-1604, Nov./Dec. 2004.
22. H. Kim and R. Lorenz, "Carrier signal injection based sensorless control methods for IPM synchronous machine drives," in Conf. Rec. 39th IEEE IAS Annu. Meeting, Seattle, WA, vol. 2, Oct. 3-7, 2004, pp. 977-984.
23. R. Lorenz and K. V. Patten, "High resolution velocity estimation for all digital, AC servo drives," IEEE Trans. Ind. Appl., vol. 27, no. 4, pp. 701-705, Jul./Aug. 1991.
24. M. Harke, H. Kim, and R. Lorenz, "Sensorless control of interior permanent magnet machine drives for zero-phase-lag position estimation," IEEE Trans. Ind. Appl., vol. 39, no. 12, pp. 1661-1667, Nov./Dec. 2003.
25. M. Linke, R. Kennel, and J. Holtz, "Sensorless speed and position control of synchronous machines using alternating carrier injection," in Proc. IEMDC, Madison, WI, Jun. 2-4, 2003, pp. 1211-1217.
26. A. Consoli, G. Scarcella, G. Tutino, and A. Testa, "Sensorless field oriented control using common mode currents," in Conf. Rec. IEEE IAS Annu. Meeting, Rome, Italy, vol. 3, Oct. 8-12, 2000, pp. 1866-1873.
27. J. Jang, S. Sul, and Y. Son, "Current measurement issues in sensorless control algorithm using high frequency signal injection method," in Conf. Rec. IEEE IAS Annu. Meeting, Salt Lake City, UT, Oct. 12-16, 2003.
28. P. Guglielmi, M. Pastorelli, and A. Vagati, "Cross saturation effects in IPM motors and related impact on zero-speed sensorless control," IEEE Trans. Ind. Appl., vol. 42, no. 6, pp. 1516-1522, Nov./Dec. 2006.
29. N. Bianchi and S. Bolognani, "Influence of rotor geometry of an interior PM motor on sensorless control feasibility," in Conf. Rec. 40th IEEE IAS Annu. Meeting, Hong Kong, Oct. 2-6, 2005, vol. 4, pp. 2553-2560.
30. N. Bianchi, S. Bolognani, J.-H. Jang, and S.-K. Sul, "Comparison of PM motor structures and sensorless control techniques for zero-speed rotor position detection," in Proc. IEEE PESC, Jeju, Korea, Jun. 20-24, 2006, pp. 1-7. CD ROM.