Rotor geometry design of interior PMSMs with and without flux barriers for more accurate sensorless control

IEEE Transactions on Industrial Electronics

Volumn 59, Issue 6, 2012, Pages 2457-2465

  Sergeant, Peter ^a   De Belie, Frederik ^a   Melkebeek, Jan ^a  

^a GHENT UNIVERSITY   (Belgium)

Author keywords

Finite element methods; Permanent magnet machines; Sensorless control; Synchronous machines

Indexed keywords

CROSS-SATURATION; D-AXIS INDUCTANCE; ESTIMATION ERRORS; FINITE-ELEMENT MODELS; FLUX BARRIER; GEOMETRY DESIGNS; HIGH-FREQUENCY VOLTAGE; HIGHER LOADS; INDUCTANCE MATRIX; INTERIOR PERMANENT-MAGNET SYNCHRONOUS MACHINES; LOW SPEED; MUTUAL INDUCTANCE; PERMANENT-MAGNET MACHINE; POSITION ESTIMATION; ROTOR DESIGN; SENSOR LESS CONTROL; SENSORLESS DRIVE; STATE-SPACE MODELS; SYNCHRONOUS MACHINE;

COMPUTER SIMULATION; DESIGN; FINITE ELEMENT METHOD; FREQUENCY ESTIMATION; INDUCTANCE; SYNCHRONOUS MACHINERY;

ESTIMATION;

EID: 84857423436     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2011.2116763     Document Type: Article

References (18)

1. H. Kim, M. C. Harke, and R. D. Lorenz, "Sensorless control of interior permanent-magnet machine drives with zero-phase lag position estimation, " IEEE Trans. Ind. Appl., vol. 39, no. 6, pp. 1726-1733, Nov./Dec. 2003.
2. J. Holtz and J. Juliet, "Sensorless acquisition of the rotor position angle of induction motors with arbitrary stator windings, " IEEE Trans. Ind. Appl., vol. 41, no. 6, pp. 1675-1682, Nov./Dec. 2005. (Pubitemid 41824659)
3. M. Schroedl and T. Stefan, "New rotor position detector for permanent magnet synchronous machines using the INFORM-method, " Eur. Trans. Elect. Power Eng., vol. 1, no. 1, pp. 47-53, Jan./Feb. 1991. (Pubitemid 23637448)
4. F. De Belie, P. Sergeant, and J. Melkebeek, "A sensorless drive by applying test pulses without affecting the average-current samples, " IEEE Trans. Power Electron., vol. 25, no. 4, pp. 875-888, Apr. 2010.
5. P. Guglielmi, M. Pastorelli, and A. Vagati, "Impact of cross-saturation in sensorless control of transverse-laminated synchronous reluctance motors, " IEEE Trans. Ind. Electron., vol. 53, no. 2, pp. 429-439, Apr. 2006.
6. P. Guglielmi, M. Pastorelli, and A. Vagati, "Cross saturation effects in IPM motors and impact on sensorless control, " IEEE Trans. Ind. Appl., vol. 42, no. 6, pp. 1516-1522, Nov./Dec. 2006. (Pubitemid 44824052)
7. F. De Belie, J. Melkebeek, L. Vandevelde, R. Boel, K. Geldhof, and T. Vyncke, "A nonlinear model for synchronous machines to describe high-frequency signal based position estimators, " in Proc. IEEE Int. Elect. Mach. Drives Conf., San Antonio, TX, May 15-18, 2005, pp. 696-703. (Pubitemid 44461383)
8. P. Sergeant, F. De Belie, and J. Melkebeek, "Effect of rotor geometry and magnetic saturation in sensorless control of PM synchronous machines, " IEEE Trans. Magn., vol. 45, no. 3, pp. 1756-1759, Mar. 2009.
9. N. Bianchi, S. Bolognani, J. Jang, and S. Sul, "Comparison of PM motor structures and sensorless control techniques for zero-speed rotor position detection, " IEEE Trans. Power Electron., vol. 22, no. 6, pp. 2466-2475, Nov. 2007. (Pubitemid 350154080)
10. N. Bianchi, S. Bolognani, and A. Faggion, "Predicted and measured errors in estimating rotor position by signal injection for salient pole PM synchronous motors, " in Proc. IEEE IEMDC, Miami, FL, May 3-6, 2009, vol. 1-3, pp. 1565-1572.
11. N. Bianchi, S. Bolognani, and A. Faggion, "Rotor design arrangement of SPM motors for the sensorless control at low speed and standstill, " in Proc. 14th EPE/PEMC, Ohrid, Macedonia, 2010, pp. S1-23-S1-28.
12. A. Vagati, P. Guglielmi, M. Pastorelli, and G. Pellegrino, "Positionsensorless control of permanent-magnet-assisted synchronous reluctance motor, " IEEE Trans. Ind. Appl., vol. 40, no. 2, pp. 615-622, Mar./Apr. 2004.
13. F. Gabriel, F. De Belie, P. Druyts, X. Neyt, J.Melkebeek, and M. Acheroy, "Compensating the influence of the stator resistor and inverter nonlinearities in signal-injection based sensorless strategies, " in Proc. 5th IEEE VPPC, Dearborn, MI, Sep. 7-11, 2009, pp. 283-290.
14. R. Raute, C. Caruana, C. S. Staines, J. Cilia, M. Sumner, and G. M. Asher, "Analysis and compensation of inverter nonlinearity effect on a sensorless PMSM drive at very low and zero speed operation, " IEEE Trans. Ind. Electron., vol. 57, no. 12, pp. 4065-4074, Dec. 2010.
15. P. Sergeant, F. De Belie, L. Dupré, and J. Melkebeek, "Losses in sensorless controlled permanent magnet synchronous machines, " IEEE Trans. Magn., vol. 46, no. 2, pp. 590-593, Feb. 2010.
16. E. Robeischl and M. Schroedl, "Optimized INFORM measurement sequence for sensorless PM synchronous motor drives with respect to minimum current distortion, " IEEE Trans. Ind. Appl., vol. 40, no. 2, pp. 591-598, Mar./Apr. 2004.
17. N. Imai, S. Morimoto, M. Sanada, and Y. Takeda, "Influence of rotor configuration on sensorless control for interior permanent magnet synchronous motors, " in Conf. Rec. 41st IEEE IAS Annu. Meeting, Oct. 8-12, 2006, vol. 4, pp. 1955-1961. (Pubitemid 47514874)
18. T. Vandoorn, F. De Belie, T. Vyncke, J. Melkebeek, and P. Lataire, "Generation of multisinusoidal test signals for the identification of synchronous-machine parameters by using a voltage-source inverter, " IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 430-439, Jan. 2010.