A quasi-sliding mode approach for robust control and speed estimation of PM synchronous motors

IEEE Transactions on Industrial Electronics

Volumn 59, Issue 2, 2012, Pages 1096-1104

  Corradini, Maria Letizia ^a   Ippoliti, Gianluca ^b   Longhi, Sauro ^b   Orlando, Giuseppe ^b  

^a UNIVERSITY OF CAMERINO   (Italy)

^b UNIVERSITÀ POLITECNICA DELLE MARCHE   (Italy)

Author keywords

Discrete time sliding mode control; electrical motor control; robust control; speed estimation

Indexed keywords

CASCADE CONTROL; CONTROL SCHEMES; CONTROL STABILITY; DIGITAL DIFFERENTIATORS; DISCRETE TIME SLIDING MODE CONTROL; DISCRETE-TIME; ELECTRICAL MOTORS; EXPERIMENTAL EVIDENCE; FIRST DERIVATIVE; PERMANENT MAGNET SYNCHRONOUS MOTOR; PM SYNCHRONOUS MOTOR; PMSM DRIVES; QUASI-SLIDING MODE; SPEED ESTIMATION; SPEED ESTIMATOR; SPEED TRAJECTORIES; SPEED-TRACKING; ULTIMATE BOUNDEDNESS;

CASCADE CONTROL SYSTEMS; ELECTRIC MOTORS; ESTIMATION; PERMANENT MAGNETS; POSITION MEASUREMENT; ROBUST CONTROL; SYNCHRONOUS MOTORS;

SPEED;

EID: 80054812004     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2011.2158035     Document Type: Article

References (62)

1. C. Rossi and A. Tonielli, "Robust control of permanent magnet motors: VSS techniques lead to simple hardware implementations," IEEE Trans. Ind. Electron., vol. 41, no. 4, pp. 451-460, Aug. 1994.
2. Z. Xu and M. F. Rahman, "Direct torque and flux regulation of an IPM synchronous motor drive using variable structure control approach," IEEE Trans. Power Electron., vol. 22, no. 6, pp. 2487-2498, Nov. 2007.
3. K.-K. Shyu, C.-K. Lai, Y.-W. Tsai, and D.-I. Yang, "A newly robust controller design for the position control of permanent-magnet synchronous motor," IEEE Trans. Ind. Electron., vol. 49, no. 3, pp. 558-565, Jun. 2002.
4. F. J. Lin, "Real-time IP position controller design with torque feedforward control for PM synchronous motor," IEEE Trans. Ind. Electron., vol. 44, no. 3, pp. 398-407, Jun. 1997.
5. F. J. Lin, R. F. Fung, and Y. C. Wang, "Sliding mode and fuzzy control of toggle mechanism using PM synchronous servomotor drive," Proc. Inst. Elect. Eng.-Control Theory Appl., vol. 144, no. 5, pp. 393-402, Sep. 1997.
6. F. J. Lin and S. L. Chiu, "Robust PM synchronous motor servo drive with variable-structure model-output-following control," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 144, no. 5, pp. 317-324, Sep. 1997.
7. F. J. Lin and Y. S. Lin, "A robust PM synchronous motor drive with adaptive uncertainty observer," IEEE Trans. Energy Convers., vol. 14, no. 4, pp. 989-995, Dec. 1999.
8. M. Ghribi and H. Le-Huy, "Optimal control and variable structure combination using a permanent-magnet synchronous motor," in Conf. Rec. IEEE-IAS Annu. Meeting, Denver, CO, 1994, vol. 1, pp. 408-415.
9. M. Rashed, P. MacConnell, A. Stronach, and P. Acarnley, "Sensorless indirect-rotor-field-orientation speed control of a permanent-magnet synchronous motor with stator-resistance estimation," IEEE Trans. Ind. Electron., vol. 54, no. 3, pp. 1664-1675, Jun. 2007.
10. K. Gulez, A. Adam, and H. Pastaci, "Torque ripple and EMI noise minimization in PMSM using active filter topology and field-oriented control," IEEE Trans. Ind. Electron., vol. 55, no. 1, pp. 251-257, Jan. 2008.
11. P. Mattavelli, L. Tubiana, and M. Zigliotto, "Torque-ripple reduction in PM synchronous motor drives using repetitive current control," IEEE Trans. Power Electron., vol. 20, no. 6, pp. 1423-1431, Nov. 2005.
12. S. Chi, Z. Zhang, and L. Xu, "Sliding-mode sensorless control of directdrive PM synchronous motors for washing machine applications," IEEE Trans. Ind. Appl., vol. 45, no. 2, pp. 582-590, Mar./Apr. 2009.
13. W. Leonhard, Control of Electric Drives. London, U.K.: Springer-Verlag, 1990.
14. C. Attaianese, A. Perfetto, and G. Tomasso, "Robust position control of DC drives by means of H∞ controllers," Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 146, no. 4, pp. 391-396, Jul. 1999.
15. H. Butler, G. Honderd, and J. van Amerongen, "Model reference adaptive control of a direct-drive DCmotor," IEEE Control Syst. Mag., vol. 9, no. 1, pp. 80-84, Jan. 1989.
16. P. Dobra, "Robust PI control for servo DC motors," in Proc. IEEE Int. Conf. Control Appl., 2002, pp. 100-101.
17. K. Ohishi, M. Nakao, K. Ohnishi, and K. Miyachi, " Microprocessorcontrolled DC motor for load-insensitive position servo system," IEEE Trans. Ind. Electron., vol. IE-34, no. 1, pp. 44-49, Feb. 1987.
18. J. O. Jang, "Neural network saturation compensation for DC motor systems," IEEE Trans. Ind. Electron., vol. 54, no. 3, pp. 1763-1767, Jun. 2007.
19. A. Pisano, A. Davila, L. Fridman, and E. Usai, "Cascade control of PM DC drives via second-order sliding-mode technique," IEEE Trans. Ind. Electron., vol. 55, no. 11, pp. 3846-3854, Nov. 2008.
20. V. I. Utkin, J. Guldner, and J. Shi, Sliding Mode Control in Electromechanical Systems. Boca Raton, FL: CRC Press, 1999, ser. Systems and Control.
21. A. Sabanovic, K. Jezernik, and N. Sabanovic, "Sliding modes applications in power electronics and electrical drives," in Variable Structure Systems: Towards the 21st Century, vol. 274, X. Yu and J.-X. Xu, Eds. Berlin, Germany: Springer-Verlag, 2002, pp. 223-251.
22. T. L. Chern and J. S.Wong, "DSP based integral variable structure control for DCmotor servo drives," Proc. Inst. Elect. Eng.-Control Theory Appl., vol. 142, no. 5, pp. 444-450, Sep. 1995.
23. J. Y. Hung,W. Gao, and J. C. Hung, "Variable structure control: A survey," IEEE Trans. Ind. Electron., vol. 40, no. 1, pp. 2-22, Feb. 1993.
24. K. D. Young, V. I. Utkin, and U. Ozguner, "A control engineer's guide to sliding mode control," IEEE Trans. Control Syst. Technol., vol. 7, no. 3, pp. 328-342, May 1999.
25. V. I. Utkin, "Sliding modes control design principles and applications to electric drives," IEEE Trans. Ind. Electron., vol. 40, no. 1, pp. 23-36, Feb. 1993.
26. Z. Yan, C. Jin, and V. I. Utkin, "Sensorless sliding-mode control of induction motors," IEEE Trans. Ind. Electron., vol. 47, no. 6, pp. 1286-1297, Dec. 2000.
27. V. I. Utkin, Sliding Modes in Control and Optimization. Berlin, Germany: Springer-Verlag, 1992.
28. A. S. I. Zinober, Variable Structure and Lyapunov Control. Berlin, Germany: Springer-Verlag, 1994.
29. G. Bartolini, N. Orani, A. Pisano, and E. Usai, "Higher-order sliding mode approaches for control and estimation in electrical drives," in Advances in Variable Structure and Sliding Mode Control, C. Edwards, E. F. Colet, and L. Fridman, Eds. Berlin, Germany: Springer-Verlag, 2006, ser. Lect. Notes in Contr. and Inf. Sci., pp. 423-445.
30. C. Y. Chan, "Discrete adaptive sliding-mode tracking controller," Automatica, vol. 33, no. 5, pp. 999-1002, May 1997.
31. X. Chen, T. Fukuda, and K. D. Young, "Adaptive quasi-sliding-mode tracking control for discrete uncertain input-output systems," IEEE Trans. Ind. Electron., vol. 48, no. 1, pp. 216-224, Feb. 2001.
32. M. L. Corradini and G. Orlando, "A discrete adaptive variable-structure controller for MIMO systems, and its application to an underwater ROV," IEEE Trans. Control Syst. Technol., vol. 5, no. 3, pp. 349-359, May 1997.
33. K. Furuta, "VSS type self-tuning control," IEEE Trans. Ind. Electron., vol. 40, no. 1, pp. 37-44, Feb. 1993.
34. O. Kaynak and A. Denker, "Discrete-time sliding mode control in the presence of system uncertainty," Int. J. Control, vol. 57, no. 5, pp. 1177-1189, 1993.
35. P. M. Lee and J. H. Oh, "Improvements on VSS-type self-tuning control for a tracking controller," IEEE Trans. Ind. Electron., vol. 45, no. 2, pp. 319-325, Apr. 1998.
36. M. Sun, Y. Wang, and D. Wang, "Variable-structure repetitive control: A discrete-time strategy," IEEE Trans. Ind. Electron., vol. 52, no. 2, pp. 610-616, Apr. 2005.
37. C.-W. Hung, C.-T. Lin, C.-W. Liu, and J.-Y. Yen, "A variable-sampling controller for brushless DC motor drives with low-resolution position sensors," IEEE Trans. Ind. Electron., vol. 54, no. 5, pp. 2846-2852, Oct. 2007.
38. C.-L. Hwang, C. Jan, and Y.-H. Chen, "Piezomechanics using intelligent variable-structure control," IEEE Trans. Ind. Electron., vol. 48, no. 1, pp. 47-59, Feb. 2001.
39. F. Sun, L. Li, H.-X. Li, and H. Liu, "Neuro-fuzzy dynamic-inversionbased adaptive control for robotic manipulators-Discrete time case," IEEE Trans. Ind. Electron., vol. 54, no. 3, pp. 1342-1351, Jun. 2007.
40. W.-C. Su and C.-C. Tsai, "Discrete-time VSS temperature control for a plastic extrusion process with water cooling systems," IEEE Trans. Control Syst. Technol., vol. 9, no. 4, pp. 618-623, Jul. 2001.
41. P. Vas, Vector Control of AC Machines. London, U.K.: Oxford Univ. Press, 1990.
42. G. Bartolini, A. Damiano, G. Gatto, I. Marongiu, A. Pisano, and E. Usai, "Robust speed and torque estimation in electrical drives by second order sliding modes," IEEE Trans. Control Syst. Technol., vol. 11, no. 1, pp. 84-90, Jan. 2003.
43. A. H. Khadim, T. K. M. Babu, and D. O'Kelly, "Measurement of steady state and transient load angle, angular velocity and acceleration using an optical encoder," IEEE Trans. Instrum. Meas., vol. 41, no. 4, pp. 486-489, Aug. 1992.
44. K. Fujita and K. Sado, "Instantaneous speed detection with parameter identification for AC servo systems," IEEE Trans. Ind. Appl., vol. 28, no. 4, pp. 864-872, Jul./Aug. 1992.
45. C. Silva, G. Asher, and M. Sumner, "Hybrid rotor position observer for wide speed-range sensorless PM motor drives including zero speed," IEEE Trans. Ind. Electron., vol. 53, no. 2, pp. 373-378, Apr. 2006.
46. G. Foo and M. Rahman, "Sensorless direct torque and flux-controlled IPM synchronous motor drive at very low speed without signal injection," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 395-403, Jan. 2010.
47. S. Shinnaka and T. Sagawa, "New optimal current control methods for energy-efficient and wide speed-range operation of hybrid-field synchronous motor," IEEE Trans. Ind. Electron., vol. 54, no. 5, pp. 2443-2450, Oct. 2007.
48. A. Arias, C. Silva, G. Asher, J. Clare, and P. Wheeler, "Use of a matrix converter to enhance the sensorless control of a surface-mount permanentmagnet AC motor at zero and low frequency," IEEE Trans. Ind. Electron., vol. 53, no. 2, pp. 440-449, Apr. 2006.
49. O. Wallmark, L. Harnefors, and O. Carlson, "An improved speed and position estimator for salient permanent-magnet synchronous motors," IEEE Trans. Ind. Electron., vol. 52, no. 1, pp. 255-262, Feb. 2005.
50. G. Bartolini, A. Ferrara, and E. Usai, "Real time output derivative estimation by means of higher order sliding modes," in Proc. IMACS Multiconf. CESA, Hammameth, Tunisia, 1998, pp. 3691-3696.
51. A. Levant, "Robust exact differentiation via sliding mode technique," Automatica, vol. 34, no. 3, pp. 379-384, Mar. 1998.
52. X. Yu and J. Xu, "Nonlinear derivative estimator," Electron. Lett., vol. 32, no. 16, pp. 1445-1447, Aug. 1996.
53. E. A. Misawa and J. K. Hedrick, "Nonlinear observers: A state-of-theart survey," J. Dyn. Syst., Meas., Control, vol. 111, no. 3, pp. 344-352, Sep. 1989.
54. R. Rajamani, "Observers for lipschitz nonlinear systems," IEEE Trans. Autom. Control, vol. 43, no. 3, pp. 397-401, Mar. 1998.
55. A. Tornambè, "High-gain observers for nonlinear systems," Int. J. Syst. Sci., vol. 23, no. 9, pp. 1475-1489, 1992.
56. J.-J.-E. Slotine, J. K. Hedrick, and E. A. Misawa, "On sliding observers for nonlinear systems," J. Dyn. Syst., Meas., Control, vol. 109, no. 3, pp. 245-252, Sep. 1987.
57. S. Drakunov, "Sliding mode observers based on equivalent control method," in Proc. 31st CDC, Tucson, AZ, 1992, pp. 2368-2369.
58. M. L. Corradini and G. Orlando, "Variable structure control of discretized continuous-time systems," IEEE Trans. Autom. Control, vol. 43, no. 9, pp. 1329-1334, Sep. 1998.
59. A. Tesfaye and M. Tomizuka, "Robust control of discretized continuous systems using the theory of sliding modes," Int. J. Control, vol. 62, no. 1, pp. 209-226, 1995.
60. J. Shi and Y. Lu, "Field-weakening operation of cylindrical permanentmagnet motors," in Proc. IEEE Int. Conf. Control Appl., Dearborn, MI, Sep. 1996, pp. 864-869.
61. Technosoft S.A., 2009. [Online]. Available: http://www.technosoftmotion. com/
62. Texas Instruments Inc., 2009. [Online]. Available: http://www.ti.com/