Depth of cure and mechanical properties of nano-hybrid resin-based composites with novel and conventional matrix formulation

Clinical Oral Investigations

Volumn 16, Issue 5, 2012, Pages 1425-1434

  Frauscher, Karina E ^a   Ilie, Nicoleta ^a  

^a UNIVERSITY OF MUNICH   (Germany)

Author keywords

Depth of cure; Dimer acid derivatives; Nano hybrid resin based composites; Tricyclodecane urethane

Indexed keywords

METHACRYLIC ACID DERIVATIVE; MIRIS 2; N'DURANCE COMPOSITE RESIN; NANOCOMPOSITE; PREMISE COMPOSITE RESIN; RESIN; SIMILE COMPOSITE RESIN; VENUS (COMPOSITE RESIN);

CHEMISTRY; COMPARATIVE STUDY; DENTAL BONDING; HARDNESS; MATERIALS TESTING; POLYMERIZATION; SURFACE PROPERTY; TIME; YOUNG MODULUS;

COMPOSITE RESINS; ELASTIC MODULUS; HARDNESS; LIGHT-CURING OF DENTAL ADHESIVES; MATERIALS TESTING; METHACRYLATES; NANOCOMPOSITES; POLYMERIZATION; SURFACE PROPERTIES; TIME FACTORS;

EID: 84866467028     PISSN: 14326981     EISSN: 14363771     Source Type: Journal    
DOI: 10.1007/s00784-011-0647-3     Document Type: Article

References (51)

1. Moszner N, Salz U (2001) New developments of polymeric dental composites. Prog Polym Sci 26: 535-576.
2. Mitra SB, Wu D, Holmes BN (2003) An application of nanotechnology in advanced dental materials. J Am Dent Assoc 134: 1382-1390.
3. Lohbauer U, Frankenberger R, Kramer N, Petschelt A (2006) Strength and fatigue performance versus filler fraction of different types of direct dental restoratives. J Biomed Mater Res B Appl Biomater 76: 114-120. doi: 10. 1002/jbm. b. 30338.
4. Endo T, Finger WJ, Kanehira M, Utterodt A, Komatsu M (2010) Surface texture and roughness of polished nanofill and nanohybrid resin composites. Dent Mater J 29: 213-223.
5. Kim JJ, Moon HJ, Lim BS, Lee YK, Rhee SH, Yang HC (2007) The effect of nanofiller on the opacity of experimental composites. J Biomed Mater Res B Appl Biomater 80: 332-338. doi: 10. 1002/jbm. b. 30601.
6. Dejak B, Mlotkowski A, Romanowicz M (2003) Finite element analysis of stresses in molars during clenching and mastication. J Prosthet Dent 90: 591-597. doi: 10. 1016/S0022391303005900.
7. Papadogiannis Y, Lakes RS, Palaghias G, Helvatjoglu-Antoniades M, Papadogiannis D (2007) Fatigue of packable dental composites. Dent Mater 23: 235-242. doi: 10. 1016/j. dental. 2006. 01. 015.
8. Ferracane JL, Greener EH (1986) The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins. J Biomed Mater Res 20: 121-131. doi: 10. 1002/jbm. 820200111.
9. Hickel R, Manhart J (2001) Longevity of restorations in posterior teeth and reasons for failure. J Adhes Dent 3: 45-64.
10. Soh MS, Yap AU, Siow KS (2003) Effectiveness of composite cure associated with different curing modes of LED lights. Oper Dent 28: 371-377.
11. Francci C, Loguercio AD, Reis A, Carrilho MR (2002) A novel filling technique for packable composite resin in class II restorations. J Esthet Restor Dent 14: 149-157.
12. Koupis NS, Martens LC, Verbeeck RM (2006) Relative curing degree of polyacid-modified and conventional resin composites determined by surface Knoop hardness. Dent Mater 22: 1045-1050. doi: 10. 1016/j. dental. 2005. 08. 008.
13. Deliperi S, Bardwell DN (2002) An alternative method to reduce polymerization shrinkage in direct posterior composite restorations. J Am Dent Assoc 133: 1387-1398.
14. Stansbury JW, Trujillo-Lemon M, Lu H, Ding X, Lin Y, Ge J (2005) Conversion-dependent shrinkage stress and strain in dental resins and composites. Dent Mater 21: 56-67. doi: 10. 1016/j. dental. 2004. 10. 006.
15. Ge J, Trujillo M, Stansbury J (2005) Synthesis and photopolymerization of low shrinkage methacrylate monomers containing bulky substituent groups. Dent Mater 21: 1163-1169. doi: 10. 1016/j. dental. 2005. 02. 002.
16. Trujillo-Lemon M, Ge J, Lu H, Tanaka J, Stansbury JW (2006) Dimethacrylate derivatives of dimer acid. J Polymer Sci Polymer Chem 44: 3921-3929. doi: 10. 1002/pola. 21493.
17. Boaro LC, Goncalves F, Guimaraes TC, Ferracane JL, Versluis A, Braga RR (2010) Polymerization stress, shrinkage and elastic modulus of current low-shrinkage restorative composites. Dent Mater 26: 1144-1150. doi: 10. 1016/j. dental. 2010. 08. 003.
18. Utterodt A (2008) Heraeus Kulzer GmbH (Hanau/Germany). Dental composites with Tricyclo[5. 2. 02. 6] decane derivatives. Europe Patent.
19. DeWald JP, Ferracane JL (1987) A comparison of four modes of evaluating depth of cure of light-activated composites. J Dent Res 66: 727-730.
20. Koupis NS, Vercruysse CW, Marks LA, Martens LC, Verbeeck RM (2004) Curing depth of (polyacid-modified) composite resins determined by scraping and a penetrometer. Dent Mater 20: 908-914. doi: 10. 1016/j. dental. 2004. 01. 001.
21. Watts DC, Amer O, Combe EC (1984) Characteristics of visible-light-activated composite systems. Br Dent J 156: 209-215.
22. Leonard DL, Charlton DG, Roberts HW, Cohen ME (2002) Polymerization efficiency of LED curing lights. J Esthet Restor Dent 14: 286-295.
23. Lindberg A, Peutzfeldt A, van Dijken JW (2005) Effect of power density of curing unit, exposure duration, and light guide distance on composite depth of cure. Clin Oral Investig 9: 71-76. doi: 10. 1007/s00784-005-0312-9.
24. Meyer GR, Ernst CP, Willershausen B (2002) Decrease in power output of new light-emitting diode (LED) curing devices with increasing distance to filling surface. J Adhes Dent 4: 197-204.
25. Atmadja G, Bryant RW (1990) Some factors influencing the depth of cure of visible light-activated composite resins. Aust Dent J 35: 213-218.
26. Azzopardi N, Moharamzadeh K, Wood DJ, Martin N, van Noort R (2009) Effect of resin matrix composition on the translucency of experimental dental composite resins. Dent Mater 25: 1564-1568. doi: 10. 1016/j. dental. 2009. 07. 011.
27. Lee YK (2008) Influence of filler on the difference between the transmitted and reflected colors of experimental resin composites. Dent Mater 24: 1243-1247. doi: 10. 1016/j. dental. 2008. 01. 014.
28. Shortall AC, Wilson HJ, Harrington E (1995) Depth of cure of radiation-activated composite restoratives-influence of shade and opacity. J Oral Rehabil 22: 337-342.
29. Primus CM, Chu CC, Shelby JE, Buldrini E, Heckle CE (2002) Opalescence of dental porcelain enamels. Quintessence Int 33: 439-449.
30. Shortall AC, Palin WM, Burtscher P (2008) Refractive index mismatch and monomer reactivity influence composite curing depth. J Dent Res 87: 84-88.
31. Lee YK, Lu H, Powers JM (2005) Measurement of opalescence of resin composites. Dent Mater 21: 1068-1074. doi: 10. 1016/j. dental. 2005. 03. 015.
32. Tarle Z, Meniga A, Ristic M, Sutalo J, Pichler G (1995) Polymerization of composites using pulsed laser. Eur J Oral Sci 103: 394-398.
33. Leloup G, Holvoet PE, Bebelman S, Devaux J (2002) Raman scattering determination of the depth of cure of light-activated composites: influence of different clinically relevant parameters. J Oral Rehabil 29: 510-515.
34. Beun S, Glorieux T, Devaux J, Vreven J, Leloup G (2007) Characterization of nanofilled compared to universal and microfilled composites. Dent Mater 23: 51-59. doi: 10. 1016/j. dental. 2005. 12. 003.
35. Chi HH (2006) A posterior composite case utilizing the incremental and stratified layering technique. Oper Dent 31: 512-516.
36. Amaral CM, de Castro AK, Pimenta LA, Ambrosano GM (2002) Influence of resin composite polymerization techniques on microleakage and microhardness. Quintessence Int 33: 685-689.
37. Kuijs RH, Fennis WM, Kreulen CM, Barink M, Verdonschot N (2003) Does layering minimize shrinkage stresses in composite restorations? J Dent Res 82: 967-971.
38. Versluis A, Douglas WH, Cross M, Sakaguchi RL (1996) Does an incremental filling technique reduce polymerization shrinkage stresses? J Dent Res 75: 871-878.
39. Loguercio AD, Reis A, Ballester RY (2004) Polymerization shrinkage: effects of constraint and filling technique in composite restorations. Dent Mater 20: 236-243. doi: 10. 1016/S0109-5641(03)00098-8.
40. Park J, Chang J, Ferracane J, Lee IB (2008) How should composite be layered to reduce shrinkage stress: incremental or bulk filling? Dent Mater 24: 1501-1505.
41. van Ende A, De Munck J, Mine A, Lambrechts P, van Meerbeek B (2010) Does a low-shrinking composite induce less stress at the adhesive interface? Dent Mater 26: 215-222. doi: 10. 1016/j. dental. 2009. 10. 003.
42. Asmussen E, Peutzfeldt A (1998) Influence of UEDMA BisGMA and TEGDMA on selected mechanical properties of experimental resin composites. Dent Mater 14: 51-56. doi: 10. 1016/S0109-5641(98)00009-8.
43. Park C, Robertson RE (1998) Mechanical properties of resin composites with filler particles aligned by an electric field. Dent Mater 14: 385-393.
44. Draughn RA, Harrison A (1978) Relationship between abrasive wear and microstructure of composite resins. J Prosthet Dent 40: 220-224.
45. Ilie N, Hickel R (2009) Macro-, micro- and nano-mechanical investigations on silorane and methacrylate-based composites. Dent Mater 25: 810-819. doi: 10. 1016/j. dental. 2009. 02. 005.
46. Ilie N, Hickel R (2009) Investigations on mechanical behaviour of dental composites. Clin Oral Investig 13: 427-438. doi: 10. 1007/s00784-009-0258-4.
47. Schmidt C, Ilie N (2011) The mechanical stability of nano-hybrid composites with new methacrylate monomers for matrix compositions. Dent Mater, doi: 10. 1016/j. dental. 2011. 11. 007.
48. Blackham JT, Vandewalle KS, Lien W (2009) Properties of hybrid resin composite systems containing prepolymerized filler particles. Oper Dent 34: 697-702.
49. Ruddell DE, Maloney MM, Thompson JY (2002) Effect of novel filler particles on the mechanical and wear properties of dental composites. Dent Mater 18: 72-80.
50. Kim KH, Ong JL, Okuno O (2002) The effect of filler loading and morphology on the mechanical properties of contemporary composites. J Prosthet Dent 87: 642-649.
51. Chung KH, Greener EH (1990) Correlation between degree of conversion, filler concentration and mechanical properties of posterior composite resins. J Oral Rehabil 17: 487-494.