Does a low-shrinking composite induce less stress at the adhesive interface?

Dental Materials

Volumn 26, Issue 3, 2010, Pages 215-222

  Van Ende, Annelies ^a   De Munck, Jan ^a   Mine, Atsushi ^a   Lambrechts, Paul ^a   Van Meerbeek, Bart ^a  

^a CATHOLIC UNIVERSITY OF LEUVEN   (Belgium)

Author keywords

Adhesion; Composite; Dentin; Micro tensile bond strength; Polymerization shrinkage; Silorane

Indexed keywords

ADHESIVE INTERFACES; APPLICATION PROTOCOLS; BONDING EFFECTIVENESS; EXPERIMENTAL GROUPS; FLAT SURFACES; HUMAN DENTIN; MICRO-TENSILE BOND STRENGTH; POLYMERIZATION SHRINKAGE; POLYMERIZATION SHRINKAGE STRESS; SELF-ETCH; SELF-ETCH ADHESIVES; SILORANES; STATISTICAL DIFFERENCES; WATER STORAGE;

ADHESION; BOND STRENGTH (CHEMICAL); BOND STRENGTH (MATERIALS); DENTISTRY; POLYMERIZATION; SHRINKAGE; TENSILE STRENGTH;

DENTAL COMPOSITES;

DENTIN BONDING AGENT; FILTEK LS LOW SHRINK RESIN; RESIN; SILICON DIOXIDE; SILORANE SYSTEM ADHESIVE; Z100 COMPOSITE RESIN; ZIRCONIUM;

ANALYSIS OF VARIANCE; ARTICLE; CHEMISTRY; COMPARATIVE STUDY; DENTAL BONDING; DENTAL CARE; DENTAL SURGERY; DENTIN; ENDODONTICS; HUMAN; MATERIALS TESTING; METHODOLOGY; NONPARAMETRIC TEST; TENSILE STRENGTH;

ANALYSIS OF VARIANCE; COMPOSITE RESINS; DENTAL BONDING, LIGHT-CURED; DENTAL CAVITY PREPARATION; DENTAL MARGINAL ADAPTATION; DENTAL RESTORATION, PERMANENT; DENTAL STRESS ANALYSIS; DENTIN; DENTIN-BONDING AGENTS; HUMANS; MATERIALS TESTING; SILICON DIOXIDE; STATISTICS, NONPARAMETRIC; TENSILE STRENGTH; ZIRCONIUM;

EID: 75449104289     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2009.10.003     Document Type: Article

References (31)

1. Choi K.K., Ryu G.J., Choi S.M., Lee M.J., Park S.J., and Ferracane J.L. Effects of cavity configuration on composite restoration. Oper Dent 29 (2004) 462-469
2. Feilzer A.J., de Gee A.J., and Davidson C.L. Setting stress in composite resin in relation to configuration of the restoration. J Dent Res 66 (1987) 1636-1639
3. Yoshikawa T., Sano H., Burrow M.F., Tagami J., and Pashley D.H. Effects of dentin depth and cavity configuration on bond strength. J Dent Res 78 (1999) 898-905
4. Ferracane J.L. Developing a more complete understanding of stresses produced in dental composites during polymerization. Dent Mater 21 (2005) 36-42
5. Labella R., Lambrechts P., Van Meerbeek B., and Vanherle G. Polymerization shrinkage and elasticity of flowable composites and filled adhesives. Dent Mater 15 (1999) 128-137
6. Eick J.D., Kotha S.P., Chappelow C.C., Kilway K.V., Giese G.J., Glaros A.G., and Pinzino C.S. Properties of silorane-based dental resins and composites containing a stress-reducing monomer. Dent Mater 23 (2007) 1011-1017
7. Eick J.D., Smith R.E., Pinzino C.S., and Kostoryz E.L. Stability of silorane dental monomers in aqueous systems. J Dent 34 (2006) 405-410
8. Guggenberger R., and Weinmann W. Exploring beyond methacrylates. Am J Dent 13 (2000) 82D-84D
9. Weinmann W., Thalacker C., and Guggenberger R. Siloranes in dental composites. Dent Mater 21 (2005) 68-74
10. Santini A., and Miletic V. Comparison of the hybrid layer formed by silorane adhesive, one-step self-etch and etch and rinse systems using confocal micro-Raman spectroscopy and SEM. J Dent 36 (2008) 683-691
11. Sauro S., Pashley D.H., Mannocci F., Tay F.R., Pilecki P., Sherriff M., and Watson T.F. Micropermeability of current self-etching and etch-and-rinse adhesives bonded to deep dentine: a comparison study using a double-staining/confocal microscopy technique. Eur J Oral Sci 116 (2008) 184-193
12. Mine A., De Munck J., Van Landuyt K.L., Lambrechts P., and Van Meerbeek. TEM interface characterization of a low-shrinking composite bonded to enamel/dentin. J Dent Res 87 (2008) [Special issue C, abstract 0252]
13. Ernst C.P., Galler P., Willershausen B., and Haller B. Marginal integrity of class V restorations: SEM versus dye penetration. Dent Mater 24 (2008) 319-327
14. Bouillaguet S., Gamba J., Forchelet J., Krejci I., and Wataha J.C. Dynamics of composite polymerization mediates the development of cuspal strain. Dent Mater 22 (2006) 896-902
15. Poitevin A., De Munck J., Van Landuyt K., Coutinho E., Peumans M., Lambrechts P., and Van Meerbeek B. Critical analysis of the influence of different parameters on the microtensile bond strength of adhesives to dentin. J Adhes Dent 10 (2008) 7-16
16. Perdigão J., Lambrechts P., Van Meerbeek B., Vanherle G., and Lopes A.L.B. Field emission SEM comparison of four postfixation drying techniques for human dentin. J Biomed Mater Res 29 (1995) 1111-1120
17. Kleverlaan C.J., and Feilzer A.J. Polymerization shrinkage and contraction stress of dental resin composites. Dent Mater 21 (2005) 1150-1157
18. Shirai K., De Munck J., Yoshida Y., Inoue S., Lambrechts P., Suzuki K., Shintani H., and Van Meerbeek B. Effect of cavity configuration and aging on the bonding effectiveness of six adhesives to dentin. Dent Mater 21 (2005) 110-124
19. De Munck J., Van Landuyt K.L., Coutinho E., Poitevin A., Peumans M., Lambrechts P., and Van Meerbeek B. Micro-tensile bond strength of adhesives bonded to class-I cavity-bottom dentin after thermo-cycling. Dent Mater 21 (2005) 999-1007
20. De Munck J., Vargas M., Iracki J., Van Landuyt K., Poitevin A., Lambrechts P., and Van Meerbeek B. One-day bonding effectiveness of new self-etch adhesives to bur-cut enamel and dentin. Oper Dent 30 (2005) 39-49
21. Tezvergil-Mutluay A., Lassila L.V.J., and Vallittu P.K. Incremental layers bonding of silorane composite: the initial bonding properties. J Dent 36 (2008) 560-563
22. Kemp-Scholte C.M., and Davidson C.L. Complete marginal seal of class V resin composite restorations effected by increased flexibility. J Dent Res 69 (1990) 1240-1243
23. Van Meerbeek B., Willems G., Celis J.P., Roos J.R., Braem M., Lambrechts P., and Vanherle G. Assessment by nano-indentation of the hardness and elasticity of the resin-dentin bonding area. J Dent Res 72 (1993) 1434-1442
24. Armstrong S.R., Keller J.C., and Boyer D.B. The influence of water storage and C-factor on the dentin-resin composite microtensile bond strength and debond pathway utilizing a filled and unfilled adhesive resin. Dent Mater 17 (2001) 268-276
25. Nayif M.M., Nakajima M., Foxton R.M., and Tagami J. Bond strength and ultimate tensile strength of resin composite filled into dentine cavity; effect of bulk and incremental filling technique. J Dent 36 (2008) 228-234
26. He Z., Shimada Y., and Tagami J. The effects of cavity size and incremental technique on micro-tensile bond strength of resin composite in class I cavities. Dent Mater 23 (2007) 533-538
27. Yamamoto A., Tsubota K., Takamizawa T., Kurokawa H., Rikuta A., Ando S., Takigawa T., Kuroda T., and Miyazaki M. Influence of light intensity on dentin bond strength of self-etch systems. J Oral Sci 48 (2006) 21-26
28. Palin W.M., Flaming G.J., Nathwani H., Burke F.J., and Randall R.C. In vitro cuspal deflection and microleakage of maxillary premolars restored with novel low-shrink dental composites. Dent Mater 21 (2005) 324-335
29. Sarr M, De Munck J, Kane AW, Faye B, Vreven J, Peumans M, et al. Micro-tensile bond strength and interfacial characterization of 11 contemporary adhesives bonded to bur-cut dentin. Oper Dent; accepted for publication.
30. Koshiro K., Sidhu S.K., Inoue S., Ikeda T., and Sano H. New concept of resin-dentin interfacial adhesion: the nanointeraction zone. J Biomed Mater Res B: Appl Biomater 77 (2006) 401-408
31. Ermis R.B., De Munck J., Cardoso M.V., Coutinho E., Van Landuyt K.L., Poitevin A., Lambrechts P., and Van Meerbeek B. Bond strength of self-etch adhesives to dentin prepared with three different diamond burs. Dent Mater 24 (2008) 978-985