메뉴 건너뛰기




Volumn 29, Issue 5-6, 2011, Pages 229-239

Focused ion beam and transmission electron microscopy as a powerful tool to understand localized corrosion phenomena

Author keywords

Focused ion beam; Localized corrosion; Pvdcoating; Transmission electron microscopy

Indexed keywords

ALUMINUM ALLOY SUBSTRATE; CATHODIC ARC EVAPORATION; COATED COMPONENTS; COATING MATERIAL; COATING MICROSTRUCTURES; CORROSION MECHANISMS; CREVICE CORROSION; CRN/NBN MULTILAYER; CROSS-SECTION ANALYSIS; ENVIRONMENTAL CONDITIONS; LOCALIZED CORROSION; MICRO DROPLETS; PROCESS PARAMETERS; PVDCOATING; SALT SPRAY TEST; SEM-EDS; SUBSTRATE INTERFACE; TEM ANALYSIS; THIN COATING; TRANSMISSION ELECTRON MICROSCOPY (TEM);

EID: 84860163282     PISSN: 03346005     EISSN: None     Source Type: Journal    
DOI: 10.1515/CORRREV.2011.013     Document Type: Article
Times cited : (5)

References (24)
  • 1
    • 14644424579 scopus 로고    scopus 로고
    • Characterisation and wear properties of industrially produced nanoscaled CrN/NbN multilayer coating
    • DOI 10.1016/j.surfcoat.2004.08.069, PII S0257897204006942
    • Bemporad E, Pecchio C, De Rossi S, Carassiti F. Characterisation and wear properties of industrially produced nanoscaled CrN/NbN multilayer coating. Surf Coat Technol 2004; 188 - 189: 319 - 330. (Pubitemid 40322817)
    • (2004) Surface and Coatings Technology , vol.188-189 , Issue.1-3 SPEC. ISSUE , pp. 319-330
    • Bemporad, E.1    Pecchio, C.2    De Rossi, S.3    Carassiti, F.4
  • 2
    • 33750992785 scopus 로고    scopus 로고
    • High thickness Ti/TiN multilayer thin coatings for wear resistant applications
    • DOI 10.1016/j.surfcoat.2006.03.042, PII S0257897206002829
    • Bemporad E, Sebastiani M, Pecchio C, De Rossi S. High thickness Ti/TiN multilayer thin coatings for wear resistant applications. Surf Coat Technol 2006; 201: 2155 - 2165. (Pubitemid 44742911)
    • (2006) Surface and Coatings Technology , vol.201 , Issue.6 , pp. 2155-2165
    • Bemporad, E.1    Sebastiani, M.2    Pecchio, C.3    De Rossi, S.4
  • 3
    • 56049098507 scopus 로고    scopus 로고
    • Tribological studies on PVD/HVOF duplex coatings on Ti6Al4V substrate
    • Bemporad E, Sebastiani M, Staia MH, Puchi Cabrera E. Tribological studies on PVD/HVOF duplex coatings on Ti6Al4V substrate. Surf Coat Technol 2008; 203: 566 - 571.
    • (2008) Surf Coat Technol , vol.203 , pp. 566-571
    • Bemporad, E.1    Sebastiani, M.2    Staia, M.H.3    Puchi, C.E.4
  • 6
    • 1842815872 scopus 로고    scopus 로고
    • Historical developments and new trends in tribological and solid lubricant coatings
    • DOI 10.1016/j.surfcoat.2003.10.022, PII S025789720301154X
    • Donnet C, Erdemir A. Historical developments and new trends in tribological and solid lubricant coatings. Surf Coat Technol 2004; 180 - 181: 76 - 84. (Pubitemid 38473599)
    • (2004) Surface and Coatings Technology , vol.180-181 , pp. 76-84
    • Donnet, C.1    Erdemir, A.2
  • 7
    • 0032970357 scopus 로고    scopus 로고
    • A review of focused ion beam milling techniques for TEM specimen preparation
    • DOI 10.1016/S0968-4328(99)00005-0, PII S0968432899000050
    • Giannuzzi LA, Stevie FA. A review of focused ion beam milling techniques for TEM specimen preparation. Micron 1999; 30: 197 - 204. (Pubitemid 29303254)
    • (1999) Micron , vol.30 , Issue.3 , pp. 197-204
    • Giannuzzi, L.A.1    Stevie, F.A.2
  • 9
    • 0034310534 scopus 로고    scopus 로고
    • Combined cathodic arc/unbalanced magnetron grown CrN/NbN superlattice coatings for applications in the cutlery industry
    • Hovsepian PEh, Lewis DB, Munz W-D. Combined cathodic arc/unbalanced magnetron grown CrN/NbN superlattice coatings for applications in the cutlery industry. Surf Coat Technol 2000; 133 - 134: 166 - 175.
    • (2000) Surf Coat Technol , vol.133 , Issue.134 , pp. 166-175
    • Hovsepian, P.1    Lewis, D.B.2    Munz, W.-D.3
  • 10
    • 0034008988 scopus 로고    scopus 로고
    • Improvement of the corrosion resistance of PVD hard coating-substrate systems
    • DOI 10.1016/S0257-8972(99)00551-4, PII S0257897299005514, Papers presented at the 1999 E-MRS conference, symposium B: protective coatings and thin films, Strasbourg, France, June 1-4, 1999
    • Jehn HA. Improvement of the corrosion resistance of PVD hard coating-substrate systems. Surf Coat Technol 2000; 125: 212 - 217. (Pubitemid 30233915)
    • (2000) Surface and Coatings Technology , vol.125 , Issue.1-3 , pp. 212-217
    • Jehn, H.A.1
  • 12
    • 78649738321 scopus 로고    scopus 로고
    • Residual stress evaluation at the micrometer scale: Analysis of thin coatings by FIB milling and digital image correlation
    • Korsunsky AM, Sebastiani M, Bemporad E. Residual stress evaluation at the micrometer scale: analysis of thin coatings by FIB milling and digital image correlation. Surf Coat Technol 2010; 205: 2393 - 2403.
    • (2010) Surf Coat Technol , vol.205 , pp. 2393-2403
    • Korsunsky, A.M.1    Sebastiani, M.2    Bemporad, E.3
  • 13
    • 50749134312 scopus 로고
    • Microstructural investigation of droplets in arc-evaporated TiN films
    • Ljungcrantz H, Hultman L, Sundgren J-E. Microstructural investigation of droplets in arc-evaporated TiN films. Surf Coat Technol 1994; 63: 123 - 128.
    • (1994) Surf Coat Technol , vol.63 , pp. 123-128
    • Ljungcrantz, H.1    Hultman, L.2    Sundgren, J.-E.3
  • 14
    • 39649092938 scopus 로고    scopus 로고
    • A guide on FIB preparation of samples containing stress corrosion crack tips for TEM and atom-probe analysis
    • Lozano-Perez S. A guide on FIB preparation of samples containing stress corrosion crack tips for TEM and atom-probe analysis. Micron 2008; 39: 320-328.
    • (2008) Micron , vol.39 , pp. 320-328
    • Lozano-Perez, S.1
  • 17
    • 0037440648 scopus 로고    scopus 로고
    • Single layer and multilayer wear resistant coatings of (Ti,Al)N: A review
    • DOI 10.1016/S0921-5093(02)00259-9, PII S0921509302002599
    • PalDey S, Deevi SC. Single layer and multilayer wear resistant coatings of (Ti, Al)N: a review. Mater Sci Eng 2003; A342: 58 - 79. (Pubitemid 35442379)
    • (2003) Materials Science and Engineering A , vol.342 , Issue.1-2 , pp. 58-79
    • PalDey, S.1    Deevi, S.C.2
  • 18
    • 77954311521 scopus 로고    scopus 로고
    • EBSD, SEM and FIB characterisation of subsurface deformation during tribocorrosion of stainless steel in sulphuric acid
    • Perreta J, Boehm-Courjaultb E, Cantonic M, Mischlera S, Beaudouind A, Chittyd W, Vernotd J-P. EBSD, SEM and FIB characterisation of subsurface deformation during tribocorrosion of stainless steel in sulphuric acid. Wear 2010; 269: 383 - 393.
    • (2010) Wear , vol.269 , pp. 383-393
    • Perreta, J.1    Boehm-Courjaultb, E.2    Cantonic, M.3    Mischlera, S.4    Beaudouind, A.5    Chittyd, W.6    Vernotd, J.-P.7
  • 19
    • 0033007641 scopus 로고    scopus 로고
    • Applications of focused ion beam microscopy to materials science specimens
    • DOI 10.1016/S0968-4328(99)00012-8, PII S0968432899000128
    • Phaneuf MW. Applications of focused ion beam microscopy to materials science specimens. Micron 1999; 30: 277 - 288. (Pubitemid 29303263)
    • (1999) Micron , vol.30 , Issue.3 , pp. 277-288
    • Phaneuf, M.W.1
  • 20
    • 0036406960 scopus 로고    scopus 로고
    • Investigation into the evolution of corrosion product layer (CPL) of 1018 C-steel exposed to multiphase environment using FIB and EIS techniques
    • DOI 10.1016/S0010-938X(02)00049-5, PII S0010938X02000495
    • Sapre K, Seal S, Jepson P, Wang HB, Rahman Z, Smith T. Investigation into the evolution of corrosion product layer (CPL) of 1018 C-steel exposed to multiphase environment using FIB and EIS techniques. Corros Sci 2003; 45: 59 - 80. (Pubitemid 35212649)
    • (2002) Corrosion Science , vol.45 , Issue.1 , pp. 59-80
    • Sapre, K.1    Seal, S.2    Jepson, P.3    Wang, H.B.4    Rahman, Z.5    Smith, T.6
  • 21
    • 57949092296 scopus 로고    scopus 로고
    • Effects of focused ion beam milling on the compressive behavior of directionally solidifi ed micropillars and the nanoindentation response of an electropolished surface
    • Shim S, Bei H, Miller MK, Pharr GM, George EP. Effects of focused ion beam milling on the compressive behavior of directionally solidifi ed micropillars and the nanoindentation response of an electropolished surface. Acta Mater 2009; 57: 503 - 510.
    • (2009) Acta Mater , vol.57 , pp. 503-510
    • Shim, S.1    Bei, H.2    Miller, M.K.3    Pharr, G.M.4    George, E.P.5
  • 22
    • 24944433462 scopus 로고    scopus 로고
    • Reversible orientation-biased grain growth in thin metal films induced by a focused ion beam
    • DOI 10.1016/j.scriptamat.2005.07.030, PII S1359646205004586
    • Spolenak R, Sauter L, Eberl C. Reversible orientation-biased grain growth in thin metal films induced by a focused ion beam. Scripta Mater 2005; 53: 1291 - 1296. (Pubitemid 41328798)
    • (2005) Scripta Materialia , vol.53 , Issue.11 , pp. 1291-1296
    • Spolenak, R.1    Sauter, L.2    Eberl, C.3
  • 24
    • 0034033907 scopus 로고    scopus 로고
    • The corrosion behaviour of macroparticle defects in arc bond-sputtered CrN/NbN superlattice coatings
    • DOI 10.1016/S0257-8972(00)00554-5, PII S0257897200005545
    • Wang HW, Stack MM, Lyon SB, Hovsepian P, Munz W-D. The corrosion behaviour of macroparticle defects in arc bond-sputtered CrN/NbN superlattice coatings. Surf Coat Technol 2000; 126: 279 - 287. (Pubitemid 30319839)
    • (2000) Surface and Coatings Technology , vol.126 , Issue.2-3 , pp. 279-287
    • Wang, H.W.1    Stack, M.M.2    Lyon, S.B.3    Hovsepian, P.4    Munz, W.-D.5


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.