Structural assessment of nanocomposites

Micron

Volumn 43, Issue 7, 2012, Pages 782-817

  Gan, Yong X ^a  

^a Toledo   (United States)

Author keywords

Characterization techniques; Energy conversion; Interface; Mechanical damage model; Nanocomposites; Structural assessment

Indexed keywords

ADVANCED STRUCTURE; CHARACTERIZATION TECHNIQUES; FUNCTIONAL NANOCOMPOSITES; INTERFACE STRUCTURES; MECHANICAL DAMAGES; METAL MATRIX NANO COMPOSITES; NANOCAST; NANOSCALE PROCESSING; SENSING APPLICATIONS; STRUCTURAL ASSESSMENTS; SURFACE CHARACTERIZATION;

ATOMIC FORCE MICROSCOPY; CERAMIC MATRIX COMPOSITES; DAMAGE DETECTION; ENERGY CONVERSION; INTERFACES (MATERIALS); METALLIC MATRIX COMPOSITES; NANOCOMPOSITES; POLYANILINE; RATING; SCANNING ELECTRON MICROSCOPY; SCANNING TUNNELING MICROSCOPY; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION;

POLYMER MATRIX COMPOSITES;

EID: 84859913956     PISSN: 09684328     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.micron.2012.02.004     Document Type: Review

References (216)

1. Abecassis-Wolfovich M., Landau M.V., Brenner A., Herskowitz M. Low-temperature combustion of 2,4,6-trichlorophenol in catalytic wet oxidation with nanocasted Mn-Ce-oxide catalyst. J. Catal. 2008, 247:201-213.
2. Abellan G., Carrillo A.I., Linares N., Serrano E., Garcia-Martinez J. Hierarchical control of porous silica by pH adjustment: alkyl polyamines as surfactants for bimodal silica synthesis and its carbon replica. J. Solid State Chem. 2009, 182:2141-2148.
3. Aglan H., Gan Y. Fatigue crack growth analysis of a premium rail steel. J. Mater. Sci. 2001, 36:389-397.
4. Aglan H., Gan Y., Chu F., Zhong W. Fatigue damage analysis of particulate and fiber filled PTFES based on energy expended on damage formation. J. Reinf. Plast. Compos. 2003, 22:339-360.
5. Alvarez S., Valdes-Solis T., Fuertes A.B. Templated synthesis of nanosized mesoporous carbons. Mater. Res. Bull. 2008, 43:1898-1904.
6. Ania C.O., Pernak J., Stefaniak F., Raymundo-Pinero E., Beguin F. Polarization-induced distortion of ions in the pores of carbon electrodes for electrochemical capacitors. Carbon 2009, 47:3158-3166.
7. Assidi M., Fourment L., Guerdoux S., Nelson T. Friction model for friction stir welding process simulation: calibrations from welding experiments. Int. J. Mach. Tools Manuf. 2010, 50:143-155.
8. Athens G.L., Shayib R.M., Chmelka B.F. Functionalization of mesostructured inorganic-organic and porous inorganic materials. Curr. Opin. Colloid Interface Sci. 2009, 14:281-292.
9. 3 nanocomposites fabricated by friction stir processing. Mater. Des. 2011, 32:2034-2041.
10. Bai P., Xing W., Wu P., Liu X., Yan Z., Zhao X.S. Evaporation-controlled nanocasting approach to a precision replication at nanometer scale. Mater. Lett. 2007, 61:4231-4234.
11. Barmouz M., Givi M., Seyfi J. On the role of processing parameters in producing Cu/SiC metal matrix composites via friction stir processing: Investigating microstructure, microhardness, wear and tensile behavior. Mater. Charact. 2011, 528:4732-4739.
12. Bauri R., Yadav D., Suhas G. Effect of friction stir processing (FSP) on microstructure and properties of Al-TiC in situ composite. Mater. Sci. Eng. A 2011, 62:108-117.
13. Boldsaikhan E., Corwin E.M., Logar A., Arbegast W. The use of neural network and discrete Fourier transform for real-time evaluation of friction stir welding. Appl. Soft Comput. 2010, 11:4839-4846.
14. Callister W. Materials Science and Engineering An Introduction 2005, John Wiley, New York. 6th ed.
15. Calvillo L., Celorrio V., Moliner R., Cabot P.L., Esparbe I., Lazaro M.J. Control of textural properties of ordered mesoporous materials. Microporous Mesoporous Mater. 2008, 116:292-298.
16. 3/20p metal matrix composite. Composites A 2005, 36:1657-1665.
17. Cavaliere P., De Marco P. Friction stir processing of AM60B magnesium alloy sheets. Mater. Sci. Eng. A 2007, 462:393-397.
18. 40 three-dimensional ordered film by colloidal crystal template. J. Solid State Chem. 2009, 182:1661-1665.
19. Chai G.S., Yoon S.B., Yu J.S. Highly efficient anode electrode materials for direct methanol fuel cell prepared with ordered and disordered arrays of carbon nanofibers. Carbon 2005, 43:3028-3031.
20. Chang C., Du X., Huang J. Achieving ultrafine grain size in Mg-Al-Zn alloy by friction stir processing. Scr. Mater. 2007, 57:209-212.
21. Chang C.I., Du X.H., Huang J.C. Producing nanograined microstructure in Mg-Al-Zn alloy by two-step friction stir processing. Scr. Mater. 2008, 59:356-359.
22. Chang C., Lee C., Huang J. Relationship between grain size and Zener-Holloman parameter during friction stir processing in AZ31 Mg alloys. Scr. Mater. 2004, 51:509-514.
23. Chen P.L., Chang J.K., Pan F.M., Kuo C.T. Tube number density control of carbon nanotubes on anodic aluminum oxide template. Diamond Relat. Mater. 2005, 14:804-809.
24. 4C metal matrix composites. Mater. Sci. Eng. A 2009, 518:174-184.
25. 2 nanotube arrays on copper foil. Appl. Surf. Sci. 2009, 255:4015-4019.
26. Commin L., Dumont M., Masse J., Barrallier L. Friction stir welding of AZ31 magnesium alloy rolled sheets: Influence of processing parameters. Mater. Sci. Eng. A 2009, 57:326-334.
27. Crespilho F.N., Iost R.M., Travain S.A., Oliveira O.N., Zucolotto V. Enzyme immobilization on Ag nanoparticles/polyaniline nanocomposites. Biosens. Bioelectron. 2009, 24(10):3073-3077.
28. 2 ceramics with idealized macropores. J. Eur. Ceram. Soc. 2008, 28:1783-1791.
29. Cui G., Ma Z., Li S. The origin of non-uniform microstructure and its effects on the mechanical properties of a friction stir processed Al-Mg alloy. Acta Mater. 2009, 57:5718-5729.
30. Cui S., Chen Z., Robson J. A model relating tool torque and its associated power and specific energy to rotation and forward speeds during friction stir welding/processing. Int. J. Mach. Tools Manuf. 2010, 50:1023-1030.
31. de Lima R.K.C., Batista M.S., Wallau M., Sanches E.A., Mascarenhas Y.P., Urquieta-Gonzalez E.A. High specific surface area LaFeCo perovskites-synthesis by nanocasting and catalytic behavior in the reduction of NO with CO. Appl. Catal. B: Environ. 2009, 90:441-450.
32. Deshpande A.S., Niederberger M. Synthesis of mesoporous ceria zirconia beads. Microporous Mesoporous Mater. 2007, 101:413-418.
33. Dhawan S.K., Singh K., Bakhshi A., Ohlan A. Conducting polymer embedded withnanoferrite and titanium dioxide nanoparticles for microwave absorption. Synth. Met. 2009, 159:2259-2262.
34. Dibandjo P., Chassagneux F., Bois L., Sigala C., Miele P. Synthesis of boron nitride with a cubic mesostructure. Microporous Mesoporous Mater. 2006, 92:286-291.
35. Dixit M., Newkirk J., Mishra R. Properties of friction stir-processed Al 1100-NiTi composite. Scr. Mater. 2007, 56:541-544.
36. Ducrot-Boisgontier C., Parmentier J., Patarin J. Influence of the carbon precursors on the structural properties of EMT-type nanocasted-carbon replicas. Microporous Mesoporous Mater. 2009, 126:101-106.
37. Elangovan K., Balasubramanian V., Babu S. Predicting tensile strength of friction stir welded AA6061 aluminium alloy joints by a mathematical model. Mater. Des. 2009, 30:188-193.
38. Escax V., Imperor-Clerc M., Bazin D., Davidson A. Nanocasting, templated syntheses and structural studies of manganese oxide nanoparticles nucleated in the pores of ordered mesoporous silicas(SBA-15). C. R. Chimie 2005, 8:663-677.
39. Fajula F., Galarneau A., Di Renzo F. Advanced porous materials: New developments and emerging trends. Microporous Mesoporous Mater. 2005, 82:227-239.
40. 2 electrode material. Microporous Mesoporous Mater. 2012, 151:418-423.
41. Fang Y., Hu H. Mesoporous TS-1: nanocasting synthesis with CMK-3 as template and its performance in catalytic oxidation of aromatic thiophene. Catal. Commun. 2007, 8:817-820.
42. Fang Y., Hu H., Chen G. Zeolite with tunable intracrystal mesoporosity synthesized with carbon aerogel as a secondary template. Microporous Mesoporous Mater. 2008, 113:481-489.
43. Fu R.W., Li Z.H., Liang Y.R., Li F., Xu F., Wu D.C. Hierarchical porous carbons: design, preparation, and performance in energy storage. New Carbon Mater. 2011, 26:171-179.
44. Fuertes A.B., Sevilla M., Alvarez S., Valdes-Solis T. Control of the structural properties of mesoporous polymers synthesized using porous silica materials as templates. Microporous Mesoporous Mater. 2008, 112:319-326.
45. Fuke M.V., Kanitkar P., Kulkarni M., Kale B.B., Aiyer R.C. Effect of particle size variation of Ag nanoparticles in polyaniline composite on humidity sensing. Talanta 2010, 81:320-326.
46. Fuller M.D., Swaminathan S., Zhilyaev A.P., McNelley T.R. Microstructural transformations and mechanical properties of cast NiAl bronze: effects of fusion welding and friction stir processing. Mater. Sci. Eng. A 2007, 463:128-137.
47. Gan Y., El-Hadik M., Aglan H., Faughnan P., Bryan C. Fatigue crack growth analysis of polymonochlorotrifluoroethylene (CTFE). J. Elastomers Plast. 1999, 31:96-129.
48. 3 nanocomposite thin films. ASME Trans.: J. Eng. Mater. Technol. 2005, 127:451-456.
49. Gan Y.X. Effect of interface structure on mechanical properties of advanced composite materials. Int. J. Mol. Sci. 2009, 10:5115-5134.
50. Gan Y.X., Gan B.J., Su L. Biophotofuel cell anode containing self-organized titanium dioxide nanotube array. Mater. Sci. Eng. B 2011, 176:1197-1206.
51. Gan Y.X., Gan B.J., Zhang L. Electrochemical deposition of iron nanoneedles on titanium oxide nanotubes. Mater. Lett. 2011, 65:2992-2994.
52. Gan Y.X., Kysar J.W. Cylindrical void in a rigid-ideally plastic single crystal III: hexagonal close-packed crystal. Int. J. Plast. 2007, 23:592-619.
53. Gan Y.X., Solomon D., Reinbolt M.J. Friction stir processing of particle reinforced composite materials. Materials 2010, 3:329-350.
54. Gan Y.X., Wei C., Lam M., Wei X., Lee D., Kysar J.W., Chen X. Deformation and fracture behavior of electrocodeposited alumina nanoparticle/copper composite films. J. Mater. Sci. 2007, 42:5256-5263.
55. Gan Y.X., Zeng X.W., Su L., Yang L., Gan B.J., Zhang L. Synthesis and enhanced light absorption of alumina matrix nanocomposites containing multilayer oxide nanorods and silver nanoparticles. Mater. Res. Bull. 2011, 46:1828-1836.
56. Gemme F., Verreman Y., Dubourg L., Jahazi M. Overview of the us fusion materials sciences program. Mater. Sci. Eng. A 2010, 527:4152-4160.
57. Goltner-Spickermann C. Non-ionic templating of silica: formation mechanism and structure. Curr. Opin. Colloid Interface Sci. 2002, 7:173-178.
58. Hirai Y., Yoshikawa T., Morimatsu M., Nakajima M., Kawata H. Fine pattern transfer by nanocasting lithography. Microelectron. Eng. 2005, 78-79:641-646.
59. Hirasawa S., Badarinarayan H., Okamoto K., Tomimura T., Kawanami T. Analysis of effect of tool geometry on plastic flow during friction stir spot welding using particle method. J. Mater. Process. Technol. 2010, 210:1455-1463.
60. Hoa L.Q., Sugano Y., Yoshikawa H., Saito M., Tamiya E. Structural assembly effects of Pt nanoparticle-carbon nanotube-polyaniline nanocomposites on the enhancement of biohydrogen fuel cell performance. Electrochim. Acta 2011, 56:9875-9882.
61. 2O molar ratio on the electromagnetic properties of polyaniline/maghemite nanocomposites. Synth. Met. 2010, 160:1609-1616.
62. Hsu C., Kao P., Ho N. Intermetallic-reinforced aluminum matrix composites produced in situ by friction stir processing. Mater. Lett. 2007, 61:1315-1318.
63. Hu H., He D. Fabrication of Si nanodot arrays by plasma enhanced CVD using porous alumina templates. Mater. Lett. 2006, 60:1019-1022.
64. Hwang S.K., Jeong S.W., Lee O.J., Lee K.H. Fabrication of vacuum tube arrays with a sub-micron dimension using anodic aluminum oxide nano-templates. Microelectron. Eng. 2005, 77:2-7.
65. Ivanova V.T., Kurochkina Y.E., Ivanov V.F., Ilyina M.V., Trushakova S.V., Shevchenko E.S., Burtseva E.I., Simakova A.A., Many Kin A.A., Nosik N.N., Shneider M.M., Timofeeva A.V., Sapurina I.Y. Viral sorption on polyaniline, carbon nanotubes and their based nanocomposites. Vopr. Virusol. 2011, 56:19-23.
66. Jana S., Zhong W., Gan Y. Characterization of the flexural behavior of a reactive graphitic nanofibers reinforced epoxy using a non-linear damage model. Mater. Sci. Eng. A 2007, 445-446:106-112.
67. Jaroniec M., Gorka J., Choma J., Zawislak A. Synthesis and properties of mesoporous carbons with high loadings of inorganic species. Carbon 2009, 47:3034-3040.
68. Jeon J., Mironov S., Sato Y., Kokawa H., Park S.H., Hirano S. Friction stir spot welding of single-crystal austenitic stainless steel. Acta Mater. 2011, 59:7439-7449.
69. Jiang P., Bertone J.F., Hwang K.S., Colvin V.L. Single-crystal colloidal multilayers of controlled thickness. Chem. Mater. 1999, 11:2132-2140.
70. Joo S.H., Lee H.I., You D.J., Kwon K., Kim J.H., Choi Y.S., Kang M., Kim J.M., Pak C., Chang H., Seung D. Ordered mesoporous carbons with controlled particle sizes as catalyst supports for direct methanol fuel cell cathodes. Carbon 2008, 46:2034-2045.
71. Kim D., Badarinarayan H., Kim J., Kim C., Okamoto K., Wagoner R., Chung K. Numerical simulation of friction stir butt welding process for AA5083-H18 sheets. Eur. J. Mech. - A/Solids 2010, 29:204-215.
72. Kim J.H., Fang B., Kim M., Yu J.S. Hollow spherical carbon with mesoporous shell as a superb anode catalyst support in proton exchange membrane fuel cell. Catal. Today 2009, 146:25-30.
73. Kim K.T., Cho S.M. A simple method for formation of metal nanowires on flexible polymer film. Mater. Lett. 2006, 60:352-355.
74. Kim Y.S., Guo X.F., Kim G.J. Synthesis of carbon monolith with bimodal meso/macroscopic pore structure and its application in asymmetric catalysis. Catal. Today 2010, 150:91-99.
75. 5 bulk metallic glass. Mater. Lett. 2007, 61:3771-3773.
76. Komathi S., Gopalan A.I., Lee K. Fabrication of a novel layer-by-layer film based glucose biosensor with compact arrangement of multi-components and glucose oxidase. Biosens. Bioelectron. 2009, 24:3131-3134.
77. Kong L.B. Synthesis of Y-junction carbon nanotubes within porous anodic aluminum oxide template. Solid State Commun. 2005, 133:527-529.
78. 4 composite hollow spheres as supports. J. Solid State Chem. 2009, 182:2081-2087.
79. Kumar A., Whitesides G.M. Features of gold having micrometer to centimeter dimensions can be formed through a combination of stamping with an elastomeric stamp and an alkanethiol ink followed by chemical etching. Appl. Phys. Lett. 1993, 63:2002-2004.
80. 2 nanocomposite as anode materials for lithium-ion batteries. Electrochim. Acta 2010, 55:4567-4572.
81. Lai X., Wang H., Mao D., Yang N., Yao J., Xing C., Wang D., Li X. Mesoporous indium oxide synthesized via a nanocasting route. Mater. Lett. 2008, 62:3868-3871.
82. Lebeau B., Parmentier J., Soulard M., Fowler C., Zana R., Vix-Guterl C., Patarin J. Organized mesoporous solids: mechanism of formation and use as host materials to prepare carbon and oxide replicas. C. R. Chimie 2005, 8:597-607.
83. Lee C., Huang J., Hsieh P. Mg based nano-composites fabricated by friction stir processing. Scr. Mater. 2006, 54:1415-1420.
84. 2 nanocomposite thin films during electrocodeposition. Mater. Sci. Eng. A 2007, 447:209-216.
85. Lee I., Kao P., Ho N. Microstructure and mechanical properties of Al-Fe in situ nanocomposite produced by friction stir processing. Intermetallics 2008, 16:1104-1108.
86. Lee O.J., Hwang S.K., Jeong S.H., Lee P.S., Lee K.H. Synthesis of carbon nanotubes with identical dimensions using an anodic aluminum oxide template on a silicon wafer. Synth. Met. 2005, 148:263-266.
87. Lee W., Lee C., Kim M., Yoon J., Kim Y., Yoen Y., Jung S. Microstructures and wear property of friction stir welded AZ91 Mg/SiC particle reinforced composite. Compos. Sci. Technol. 2006, 66:1513-1520.
88. Leitner A., Sturma M., Smatt J.H., Jarn M., Linden M., Mechtler K., W.L. Optimizing the performance of tin dioxide microspheres for phosphopeptide enrichment. Anal. Chim. Acta 2009, 638:51-57.
89. 2 as a model system. Microporous Mesoporous Mater. 2009, 123:185-192.
90. Li H., Zhu S., Xi H., Wang R. Nickel oxide nanocrystallites within the wall of ordered mesoporous carbon CMK-3: synthesis and characterization. Microporous Mesoporous Mater. 2006, 89:196-203.
91. Li N., Lei T., Liu Y., He Y., Zhang Y. Electrochemical preparation and characterization of gold-polyaniline core-shell nanocomposites on highly oriented pyrolytic graphite. Trans. Nonferrous Metals Soc. China (English Ed.) 2010, 20:2314-2319.
92. Li N., Lei T., Ouyang C., He Y., Liu Y. An amperometric enzyme biosensor based on in situ electrosynthesized core-shell nanoparticles. Synth. Met. 2009, 159:1608-1611.
93. Li N., Li X., Yin X., Wang W., Qiu S. Electroless deposition of open-end Cu nanotube arrays. Solid State Commun. 2004, 132:841-844.
94. Li S., Liang Y., Wu D., Fu R. Fabrication of bimodal mesoporous carbons from petroleum pitch by a one-step nanocasting method. Carbon 2010, 48:839-843.
95. Li X., Nandhakumar I.S., Attard G.S., Markham M.L., Smith D.C., Baumberg J.J. Nanotemplated lead telluride thin films. Microporous Mesoporous Mater. 2009, 118:403-407.
96. Li Y., Wang Z., Gu H., Xue G. A facile strategy for synthesis of multilayer and conductive organo-silica/polystyrene/polyaniline composite particles. J. Colloid Interface Sci. 2011, 355:269-273.
97. Li Z., Jia Z., Luan Y., Mu T. Ionic liquids for synthesis of inorganic nanomaterials. Curr. Opin. Solid State Mater. Sci. 2008, 12:1-8.
98. Liao Y., Marietta-Tondin O., Liang Z., Zhang C., Wang B. Investigation of the dispersion process of SWNTs/SC-15 epoxy resin nanocomposites. Mater. Sci. Eng. A 2004, 385:175-181.
99. Lim D., Shibayanagi T., Gerlich A. Synthesis of multi-walled CNT reinforced aluminium alloy composite via friction stir processing. Mater. Sci. Eng. A 2009, 507:194-199.
100. Liu F.C., Ma Z.Y., Chen L. Low-temperature superplasticity of Al-Mg-Sc alloy produced by friction stir processing. Scr. Mater. 2009, 60:968-971.
101. Liu Q., Nayfeh M.H., Yau S. A silicon nanoparticle-based polymeric nano-composite material for glucose sensing. J. Electroanal. Chem. 2011, 657:172-175.
102. Liu Q., Wang A., Xu J., Zhang Y., Wang X., Zhang T. Preparation of ordered mesoporous crystalline alumina replicated by mesoporous carbon. Microporous Mesoporous Mater. 2008, 116:461-468.
103. Liu Y., Feng X., Shen J., Zhu J., Hou W. Fabrication of a novel glucose biosensor based on a highly electroactive polystyrene/polyaniline/Au nanocomposite. J. Phys. Chem. B 2008, 112:9237-9242.
104. 4 nanoparticles patterned in SBA-15 silicas: Accessibility and activity for CO oxidation. Catal. Commun. 2007, 8:2105-2109.
105. Lorrain O., Favier V., Zahrouni H., Lawrjaniec D. Understanding the material flow path of friction stir welding process using unthreaded tools. J. Mater. Process. Technol. 2010, 210:603-609.
106. Lu A.H., Li W.C., Schmidt W., Kiefer W., Schuth F. Easy synthesis of an ordered mesoporous carbon with a hexagonally packed tubular structure. Carbon 2004, 42:2939-2948.
107. Lu A.H., Schuth F. Nanocasting pathways to create ordered mesoporous solids. C.R. Chimie 2005, 8:609-620.
108. Lu A.H., Tuysuz H., Schuth F. Synthesis of ordered mesoporous carbon containing highly dispersed copper-sulphur compounds in the carbon framework via a nanocasting route. Microporous Mesoporous Mater. 2008, 111:117-123.
109. Lu X., Dou H., Yang S., Hao L., Zhang L., Shen L., Zhang F., Zhang X. Fabrication and electrochemical capacitance of hierarchical graphene/polyaniline/carbon nanotube ternary composite film. Electrochim. Acta 2011, 56(25):9224-9232.
110. Ma Y., Qi L. Solution-phase synthesis of inorganic hollow structures by templating strategies. J. Colloid Interface Sci. 2009, 335:1-10.
111. Ma Z.Y., Mishra R.S., Liu F.C. Superplastic behavior of micro-regions in two-pass friction stir processed 7075Al alloy. Mater. Sci. Eng. A 2009, 505:70-78.
112. Mahmoud W.E. A novel photodiode made of hybrid organic/inorganic nanocomposite. J. Phys. D: Appl. Phys. 2009, 42:155502.
113. 3/20p reinforced alloy. Compos. Sci. Technol. 2006, 66:363-371.
114. 3 surface nanocomposite by friction stir processing. J. Mater. Process. Technol. 2011, 211:1614-1619.
115. Meyyappan M. Carbon Nanotubes Science and Applications 2005, CRC Press, Boca Raton.
116. Millick N., Morgan J., Hatchett D.W. Electrochemical synthesis of mesoporous polyaniline/palladium nanocomposites. American Chemical Society, Polymer Preprints, Division of Polymer Chemistry, vol. 49 2008, 475-476.
117. Mohanty P., Kokoszka B., Liu C., Weinberger M., Mandal M., Stagno V., Fei Y., Landskron K. Large-pore periodic mesoporous silicas with crystalline channel walls and exceptional hydrothermal stability synthesized by a general high-pressure nanocasting route. Microporous Mesoporous Mater. 2012, 152:214-218.
118. Morisada Y., Fujii H., Mizuno T., Abe G., Nagaoka T., Fukusumi M. Nanostructured tool steel fabricated by combination of laser melting and friction stir processing. J. Appl. Phys. 2009, 505:157-162.
119. Morisada Y., Fujii H., Nagaoka T., Fukusumi M. Effect of friction stir processing with SiC particles on microstructure and hardness of AZ31. Mater. Sci. Eng. A 2006, 433:50-54.
120. Morisada Y., Fujii H., Nagaoka T., Fukusumi M. MWCNTs/AZ31 surface composites fabricated by friction stir processing. Mater. Sci. Eng. A 2006, 419:344-348.
121. Nakamura T., Yamada Y., Yano K. Monodispersed nanoporous starburst carbon spheres and their three-dimensionally ordered arrays. Microporous Mesoporous Mater. 2009, 117:478-485.
122. Pacula A., Mokaya R. Layered double hydroxides as templates for nanocasting porous N-doped graphitic carbons via chemical vapour deposition. Microporous Mesoporous Mater. 2007, 106:147-154.
123. Parmentier J., Saadhallah S., Reda M., Gibot P., Roux M., Vidal L., Vix-Guterl C., Patarin J. New carbons with controlled nanoporosity obtained by nanocasting using a SBA-15 mesoporous silica host matrix and different preparation routes. J. Phys. Chem. Solids 2004, 65:139-146.
124. Parmentier J., Valtchev V., Gaslain F., Tosheva L., Ducrot-Boisgontier C., Moller J., Patarin J., Vix-Guterl C. Effect of the zeolite crystal size on the structure and properties of carbon replicas made by a nanocasting process. Carbon 2009, 47:1066-1073.
125. Pellin M.J., Stair P.C., Xiong G., Elam J.W., Birell J., Curtiss L., George S.M., Han C.Y., Iton L., Kung H., Kung M., Wang H.H. Mesoporous catalytic membranes: Synthetic control of pore size and wall composition. Catal. Lett. 2005, 102:127-130.
126. Perez-Cabero M., Esteve-Turrillas F.A., Beltran D., Amoros P. Hierarchical porous carbon with designed pore architecture and study of its adsorptive properties. Solid State Sci. 2010, 12:15-25.
127. Perez-Cabero M., Puchol V., Beltran D., Amoros P. Thalassiosira pseudonana diatom as biotemplate to produce a macroporous ordered carbon-rich material. Carbon 2008, 46:297-304.
128. Pervin F., Zhou Y., Rangari V., Jeelani S. Testing and evaluation on the thermal and mechanical properties of carbon nano fiber reinforced SC-15 epoxy. Mater. Sci. Eng. A 2005, 405:246-253.
129. 2. Energy Procedia 2009, 1:869-874.
130. 2 addition on the microwave absorption property of polyaniline micro/nanocomposites. Polym. Adv. Technol. 2009, 20:550-557.
131. Picciani P.H.S., Medeiros E.S., Pan Z., Orts W.J., Mattoso L.H.C., Soares B.G. Development of conducting polyaniline/poly(lactic acid) nanofibers by electrospinning. J. Appl. Polym. Sci. 2009, 112(2):744-753.
132. 3 particulate-reinforced composite friction stir welded butt joints. Int. J. Fatigue 2009, 31:111-121.
133. Popp A., Engstler J., Schneider J.J. Porous carbon nanotube-reinforced metals and ceramics via a double templating approach. Carbon 2009, 47:3208-3214.
134. Prabhakar P.K., Raj S., Anuradha P.R., Sawant S.N., Doble M. Biocompatibility studies on polyaniline and polyaniline-silver nanoparticle coated polyurethane composite. Colloids Surf. B: Biointerfaces 2011, 86(1):146-153.
135. 3 MMC. Mater. Sci. Eng. A 2003, 349:156-165.
136. Prangnell P., Heason C. Grain structure formation during friction stir welding observed by the 'stop action technique'. Acta Mater. 2005, 53:3179-3192.
137. Puertolas B., Solsona B., Agouram S., Murillo R., Mastral A.M., Aranda A., Taylor S.H., Garcia T. The catalytic performance of mesoporous cerium oxides prepared through a nanocasting route for the total oxidation of naphthalene. Appl. Catal. B: Environ. 2010, 93:395-405.
138. Qu J., Xu H., Feng Z., Frederick Z.A., An L., Heinrich H. Improving the tribological characteristics of aluminum 6061 alloy by surface compositing with sub-micro-size ceramic particles via friction stir processing. Wear 2011, 271:1940-1945.
139. Rahman M.S., Rankin S.E. Predictive synthesis of ordered mesoporous silica with maltoside and cationic surfactants based on aqueous lyotropic phase behavior. J. Colloid Interface Sci. 2010, 342:33-42.
140. Rao M.P., Goldberg-Oppenheimer P., Kababya S., Vegab S., Landau M. Proton enriched high-surface-area cesium salt of phosphotungstic heteropolyacid with enhanced catalytic activity fabricated by nanocasting strategy. J. Mol. Catal. A: Chem. 2007, 275:214-227.
141. Reddy K.R., Sin B.C., Ryu K.S., Noh J., Lee Y. In situ self-organization of carbon black-polyaniline composites from nanospheres to nanorods: synthesis, morphology, structure and electrical conductivity. Synth. Met. 2009, 159:1934-1939.
142. Riaz U., Ahmad S.A., Ahmad S., Ashraf S.M. A comparative study on camphorsulphonic acid modified montmorillonite clay based conducting polymer nanocomposites. Polym. Compos. 2010, 31:906-912.
143. Rigby S.P., Beanlands K., Evbuomwan I.O., Watt-Smith M.J., Edler K.J., Fletcher R.S. Nanocasting of novel, designer-structured catalyst supports. Chem. Eng. Sci. 2004, 59:5113-5120.
144. 2: synthesis by nanocasting, characterisation and catalytic properties. Microporous Mesoporous Mater. 2007, 101:335-341.
145. Roggenbuck J., Waitz T., Tiemann M. Synthesis of mesoporous metal oxides by structure replication: strategies of impregnating porous matrices with metal salts. Microporous Mesoporous Mater. 2008, 113:575-582.
146. Saito R., Dresselhaus G., Dresselhaus M. Physical Properties of Carbon Nanotubes 1998, Imperial College Press, London.
147. 3. Catal. Today 2005, 107-108:537-544.
148. Satishkumar G., Titelman L., Landau M. Mechanism for the formation of tin oxide nanoparticles and nanowires inside the mesopores of SBA-15. J. Solid State Chem. 2009, 182:2822-2828.
149. 3 surface nano-composite layer produced by friction stir processing. Mater. Sci. Eng. A 2009, 500:84-91.
150. 4 with high visible-light-induced photocatalytic activity: ultrasonic-assisted synthesis and protective effect of surfactant. J. Hazard. Mater. 2009, 127:338-344.
151. Shumakovich G.P., Vasil'eva I.S., Morozova O.V., Khomenkov V.G., Staroverova I.N., Budashov I.A., Kurochkin I.N., Boyeva J.A., Sergeyev V.G., Yaropolov A.I. A comparative study of water dispersible polyaniline nanocomposites prepared by laccase-catalyzed and chemical methods. J. Appl. Polym. Sci. 2010, 117(3):1544-1550.
152. Sillikas N., Al-Kheraif A., Watts D. Influence of P/L ratio and peroxide/amine concentrations on shrinkage-strain kinetics during setting of PMMA/MMA biomaterial formulations. Biomaterials 2005, 26:197-204.
153. Singh R.A., Yoon E.S., Kim H.J., Kim J., Jeong H.E., Suh K.Y. Replication of surfaces of natural leaves for enhanced micro-scale tribological property. Mater. Sci. Eng. C 2007, 27:875-879.
154. Sinha P., Muthukumaran S., Mukherjee S. Analysis of first mode of metal transfer in friction stir welded plates by image processing technique. J. Mater. Process. Technol. 2008, 197:17-21.
155. Smatt J.H., Schuwer N., Jarn M., Lindner W., Linden M. Synthesis of micrometer sized mesoporous metal oxide spheres by nanocasting. Microporous Mesoporous Mater. 2008, 112:308-318.
156. Sogo K., Nakajima M., Kawata H., Hirai Y. Reproduction of fine structures by nanocasting lithography. Microelectron. Eng. 2007, 84:909-911.
157. Soler-Illia G.J.A.A., Crepaldi E.L., Grosso D., Sanchez C. Block copolymer-templated mesoporous oxides. Curr. Opin. Colloid Interface Sci. 2003, 8:109-126.
158. Solsona B., Aylon E., Murillo R., Mastral A.M., Monzonis A., Agouram S., Davies T.E., Taylor S.H., Garcia T.A. Deep oxidation of pollutants using gold deposited on a high surface area cobalt oxide prepared by a nanocasting route. J. Hazard. Mater. 2011, 187:544-552.
159. Srinivasu P., Vinu A., Hishita S., Sasaki T., Ariga K., Mori T. Preparation and characterization of novel microporous carbon nitride with very high surface area via nanocasting technique. Microporous Mesoporous Mater. 2008, 108:340-344.
160. 2 nanotubes covered by Te-Bi-Pb nanoparticles. Electrochim. Acta 2011, 56:5794-5803.
161. 2-CoO coaxial nanocables. Scr. Mater. 2011, 64:745-748.
162. Suhuddin U., Mironov S., Sato Y., Kokawa H., Lee C.-W. Grain structure evolution during friction-stir welding of AZ31 magnesium alloy. Mater. Sci. Eng. A 2009, 57:5406-5418.
163. Sun J., Ma D., Zhang H., Bao X., Weinberg G., Su D. Macro-mesoporous silicas complex and the carbon replica. Microporous Mesoporous Mater. 2007, 100:356-360.
164. Sun Xiu-Yu, Xu Fa-Qiang, Zong-Mu Li, Wen-Hua Zhang. Cyclic voltammetry for the fabrication of high dense silver nanowire arrays with the assistance of aao template. Mater. Chem. Phys. 2005, 90:69-72.
165. Tewari A., Spowart J., Gokhale A., Mishra R., Miracle D. Characterization of the effects of friction stir processing on microstructural changes in DRA composites. Mater. Sci. Eng. A 2006, 428:80-90.
166. Tozaki Y., Uematsu Y., Tokaji K. A newly developed tool without probe for friction stir spot welding and its performance. J. Mater. Process. Technol. 2010, 210:844-851.
167. Valdes-Solis T., Fuertes A.B. High-surface area inorganic compounds prepared by nanocasting techniques. Mater. Res. Bull. 2006, 41:2187-2197.
168. Valdes-Solis T., Valle-Vigon P., Alvarez S., Marban G., Fuertes A.B. Manganese ferrite nanoparticles synthesized through a nanocasting route as a highly active Fenton catalyst. Catal. Commun. 2007, 8:2037-2042.
169. 4 nanoparticles within SBA-15 using alkane solvents. Microporous Mesoporous Mater. 2009, 118:183-188.
170. Vantomme A., Surahy L., Su B.L. Highly ordered mesoporous carbon materials CMI-8 with variable morphologies synthesised by nanocasting. Colloids Surf. A: Physicochem. Eng. Aspects 2007, 300:65-69.
171. 3. Thin
172. Walcarius A., Kuhn A. Ordered porous thin films in electrochemical analysis. Trends Anal. Chem. 2008, 27:593-603.
173. Wan L., Fu H., Shi K., Tian X. Facile synthesis of ordered nanocrystalline alumina thin films with tunable mesopore structures. Microporous Mesoporous Mater. 2008, 115:301-307.
174. p reinforced aluminum metal matrix composites by friction stir processing. J. Mater. Process. Technol. 2009, 209:2099-2103.
175. Wang X., Han G.R. Fabrication and characterization of anodic aluminum oxide template. Microelectron. Eng. 2003, 66:166-170.
176. 2 nanowire arrays. J. Power Sources 2005, 140:211-215.
177. 2. J. Solid State Chem. 2010, 183:277-284.
178. Wang Z., Li F., Ergang N.S., Stein A. Effects of hierarchical architecture on electronic and mechanical properties of nanocast monolithic porous carbons and carbon-carbon nanocomposites. Chem. Mater. 2006, 18:5543-5553.
179. Wang Z., Li F., Ergang N.S., Stein A. Synthesis of monolithic 3D ordered macroporous carbon/nano-silicon composites by diiodosilane decomposition. Carbon 2008, 46:1702-1710.
180. White S., Sottos N., Geubelle P., Moore J., Kessler M., Sriram S., Brown E., Viswanathan S. Autonomic healing of polymer composites. Nature 2001, 409:794-796.
181. Wu D., Liang Y., Yang X., Li Z., Zou C., Zeng X., Lu G., Fu R. Direct fabrication of bimodal mesoporous carbon by nanocasting. Microporous Mesoporous Mater. 2008, 116:91-94.
182. Wu Z., Meng Y., Zhao D. Nanocasting fabrication of ordered mesoporous phenol-formaldehyde resins with various structures and their adsorption performances for basic organic compounds. Microporous Mesoporous Mater. 2010, 128:165-179.
183. Xia X.H., Tu J.P., Zhang J., Xiang J.Y., Wang X.L., Zhao X.B. Cobalt oxide ordered bowl-like array films prepared by electrodeposition through monolayer polystyrene sphere template and electrochromic properties. ACS Appl. Mater. Interfaces 2010, 2:186-192.
184. Xiang L., Royer S., Zhang H., Tatibouet J.M., Barrault J., Valange S. Properties of iron-based mesoporous silica for the CWPO of phenol: a comparison between impregnation and co-condensation routes. J. Hazard. Mater. 2009, 172:1175-1184.
185. Xie J., Wong P. Nanofluids containing multiwalled carbon nanotubes and their enhanced thermal conductivities. J. Appl. Phys. 2003, 94:4967-4968.
186. Xing R., Rankin S.E. Use of the ternary phase diagram of a mixed cationic/glucopyranoside surfactant system to predict mesostructured silica synthesis. J. Colloid Interface Sci. 2007, 316:930-938.
187. Xing R., Rankin S.E. Reactive pore expansion during ammonia vapor post-treatment of ordered mesoporous silica prepared with mixed glucopyranoside and cationic surfactants. Microporous Mesoporous Mater. 2008, 108:65-76.
188. Xing W., Zhuo S.P., Gao X. Alpha-Fe-incorporated nanoporous carbon with magnetic properties. Mater. Lett. 2009, 63:1177-1179.
189. Xu L.Y., Shi Z.G., Feng Y.Q. A facile route to a silica monolith with ordered mesopores and tunable through pores by using hydrophilic urea formaldehyde resin as a template. Microporous Mesoporous Mater. 2007, 98:303-308.
190. Yan J., Wang A., Kim D.P. Preparation of ordered mesoporous SiCN ceramics with large surface area and high thermal stability. Microporous Mesoporous Mater. 2007, 100:128-133.
191. Yan Y., Zhang D., Qiu C., Zhang W. Dissimilar friction stir welding between 5052 aluminum alloy and AZ31 magnesium alloy. Trans. Nonferrous Metals Soc. China 2010, 20:s619-s623.
192. Yang Y.X., Bourgeois L., Zhao C., Zhao D., Chaffee A., Webley P.A. Ordered micro-porous carbon molecular sieves containing well-dispersed platinum nanoparticles for hydrogen storage. Microporous Mesoporous Mater. 2009, 119:39-46.
193. Yang Z., Huang Y., Dong B., Li H.L. Template induced sol-gel synthesis of highly ordered lanio3 nanowires. J. Solid State Chem. 2005, 178:1157-1164.
194. 9 nanowires fabricated from a template-induced sol-gel route. J. Solid State Chem. 2006, 179:3324-3329.
195. Yu W.H., Fei G.T., Chen X.M., Xue F.H., Xu X.J. Influence of defects on the ordering degree of nanopores made from anodic aluminum oxide. Phys. Lett. A 2006, 350:392-395.
196. Yuan Z., Chen H., Zhang J. Facile method to prepare lotus-leaf-like super-hydrophobic poly(vinyl chloride) film. Appl. Surf. Sci. 2008, 254:1593-1598.
197. Yue W., Zhou W. Crystalline mesoporous metal oxide. Progr. Nat. Sci. 2008, 18:1329-1338.
198. Zahmatkesh B., Enayati M.H. A novel approach for development of surface nanocomposite by friction stir processing. Mater. Sci. Eng. A 2010, 527:6734-6740.
199. Zeng X.W., Gan Y.X., Clark E., Su L. Amphiphilic and photocatalytic behaviors of TiO2 nanotube arrays on Ti prepared via electrochemical oxidation. J. Alloys Compd. 2011, 509:L221-L227.
200. Zhang F., Wong S.S. Controlled synthesis of semiconducting metal sulfide nanowires. Chem. Mater. 2009, 21:4541-4554.
201. Zhang G., Su W., Zhang J., Wei Z., Zhang J. Effects of shoulder on interfacial bonding during friction stir lap welding of aluminum thin sheets using tool without pin. Trans. Nonferrous Metals Soc. China 2010, 20:2223-2228.
202. 2 as support for highly active gold catalyst in CO oxidation. Chin. J. Catal. 2009, 30:1085-1090.
203. Zhang Y., Lin L., Feng Z., Zhou J., Lin Z. Fabrication of a PANi/Au nanocomposite modified nanoelectrode for sensitive dopamine nanosensor design. Electrochim. Acta 2009, 55:265-270.
204. Zhang Y., Lin Y., Chang C., Wu T. Conducting and magnetic behaviors of polyaniline coated multi-walled carbon nanotube composites containing monodispersed magnetite nanoparticles. Synth. Met. 2011, 161:937-942.
205. Zhang Z., Zhang H.W. Numerical studies on controlling of process parameters in friction stir welding. J. Mater. Process. Technol. 2009, 209:241-270.
206. 2 synthesized by a nanocasting route for high hydrogen sensing performance. Sens. Actuators B: Chem. 2011, 160:604-608.
207. Zhao Y., Chen M., Zhang Y., Xu T., Liu W. A facile approach to formation of through-hole porous anodic aluminum oxide film. Mater. Lett. 2005, 59:40-43.
208. Zhao Y., Chen M., Zhang Y., Xu Z., Liu W. A facile approach to formation of through-hole porous anodic aluminum oxide film. Mater. Lett. 2005, 59:40-43.
209. Zhong W., Li J., Xu L.R., Lukehart C. Graphitic carbon nanofiber (GCNF)/polymer materials. II. GCNF/epoxy monoliths using active oxydianiline linker molecules and the effect of nanofiber reinforcement on curing conditions. Polym. Compos. 2005, 26:128-135.
210. Zhong W., Zhamu A., Aglan A., Stone J., Gan Y. Effect of residual stresses on fatigue crack growth behavior of aluminum substrate repaired with a bonded composite patch. J. Adhes. Sci. Technol. 2005, 19:1113-1128.
211. Zhou J., He J., Zhang C., Wang T., Sun D., Di Z., Wang D. Mesoporous carbon spheres with uniformly penetrating channels and their use as a supercapacitor electrode material. Mater. Charact. 2010, 61:31-38.
212. Zhou L., Li H., Yu C., Zhou X., Tang J., Meng Y., Xia Y., Zhao D. Easy synthesis and supercapacities of highly ordered mesoporous polyacenes/carbons. Carbon 2006, 44:1581-1616.
213. Zhou L., Liu H. Effect of 0.5wt. percent hydrogen addition on microstructural evolution of Ti-6Al-4V alloy in the friction stir welding and post-weld dehydrogenation process. Mater. Charact. 2011, 62:1036-1041.
214. 4 (M=Cu, Mn and Ni) spinels: structural replication, characterization and catalytic application in co oxidation. Microporous Mesoporous Mater. 2009, 124:144-152.
215. Zhu J., Gao Q., Chen Z. Preparation of mesoporous copper cerium bimetal oxides with high performance for catalytic oxidation of carbon monoxide. Appl. Catal. B: Environ. 2008, 81:236-243.
216. 2 from SBA-15 via surface modification and ultrasonic waves. Microporous Mesoporous Mater. 2006, 95:257-264.