Applications of nonlinear laser nano/microlithography: Fabrication from nanophotonic to biomedical components

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 8204, Issue , 2011, Pages

  Malinauskas, M ^a   Danilevicius P ^a   Balciunas E ^b   Rekstyte S ^a   Stankevicius E ^c   Baltriukiene, D ^b   Bukelskiene, V ^b   Raciukaitis G ^c   Gadonas, R ^a  

^a VILNIUS UNIVERSITY   (Lithuania)

^b VILNIUS UNIVERSITY   (Lithuania)

^c CENTER FOR PHYSICAL SCIENCES AND TECHNOLOGY   (Lithuania)

Author keywords

3D scaffolds; Biocompatible and biodegradable photopolymers; Direct laser writing; Micro nanofabrication; Micromolding; Multi beam interference; Multi photon polymerization; Tissue engineering

Indexed keywords

3D SCAFFOLDS; DIRECT LASER WRITING; MICRO/NANOFABRICATION; MICROMOLDING; MULTIBEAM INTERFERENCES; MULTIPHOTONS;

DRUG DELIVERY; FABRICATION; FUNCTIONAL POLYMERS; GROWTH (MATERIALS); MICROMACHINING; MOLDING; NANOPHOTONICS; PHOTONS; PHOTOPOLYMERS; POLYMERIZATION; SCANNING; STEM CELLS; THREE DIMENSIONAL; TISSUE; TISSUE ENGINEERING;

SCAFFOLDS (BIOLOGY);

EID: 84855813405     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.898982     Document Type: Conference Paper

References (33)

1. S. Juodkazis, V. Mizeikis, and H. Misawa, "Three-dimensional structuring of resists and resins by direct laser writing and holographic recording," Adv. Polym. Sci. 213, pp. 157-206, 2008.
2. F. Qi, Y. Li, D. Tan, H. Yang, and Q. Gong, "Polymerized nanotips via two-photon photopolymerization," Opt. Expr. 15(3), pp. 971-976, 2007.
3. P. P. Naulleau, C. N. Anderson, J. Chiu, P. Denham, S. George, K. A. Goldberg, M. Goldstein, B. Hoef, R. Hudyma, G. Jones, C. Koh, B. L. Fontaine, A. Ma, W. Montgomery, D. Niakoula, J. o. Park, T. Wallow, and S. Wurm, "22-nm half-pitch extreme ultraviolet node development at the sematech berkeley microfield exposure tool," Microelectron. Eng. 86(4-6), pp. 448-455, 2009.
4. G. R. Sune, Electron beam lithography for nanofabrication. PhD thesis, University of Barcelona, 2008.
5. S. Rousset and E. Ortega, "Self-organized nanostructures," J. Phys. Condens. Matter 18(13), 2006.
6. M. Walther, A. Ortner, H. Meier, U. Loffelmann, P. J. Smith, and J. G. Korvink, "Terahertz metamaterials fabricated by inkjet printing," Appl. Phys. Lett. 95(25), pp. 251107-251103, 2009.
7. Y. C. Lim, P. E. Boukany, D. F. Farson, and L. J. Lee, "Direct-write femtosecond laser ablation and dna combing and imprinting for fabrication of a micro/nanofluidic device on an ethylene glycol dimethacrylate polymer," J. Micromech. Microeng. 21(1), p. 015012, 2011.
8. S. Kumar, "Selective laser sintering: A qualitative and objective approach," JOM-J. Min. Met. Mat. S. 55(10), pp. 43-47, 2003.
9. Q. Sun, S. Juodkazis, N. Murazawa, V. Mizeikis, and H. Misawa, "Freestanding and movable photonic microstructures fabricated by photopolymerization with femtosecond laser pulses," J. Micromech. Microeng. 20(3), p. 035004, 2010.
10. M. Malinauskas, H. Gilbergs, A. Žukauskas, V. Purlys, D. Paipulas, and R. Gadonas, "A femtosecond laser induced two-photon photopolymerization technique for structuring microlenses," J. Opt. 12(3), p. 035204, 2010.
11. D. Wu, Q. D. Chen, L. G. Niu, J. N. Wang, J. Wang, R. Wang, H. Xia, and H. B. Sun, "Femtosecond laser rapid prototyping of nanoshells and suspending components towards microfluidic devices," Lab Chip 9(16), pp. 2391-2394, 2009.
12. A. Ovsianikov, S. Schlie, A. Ngezahayo, A. Haverich, and B. N. Chichkov, "Two-photon polymerization technique for microfabrication of cad-designed 3d scaffolds from commercially available photosensitive materials," J. Tiss. Eng. Regen. Med. 1(6), pp. 443-449, 2007.
13. A. Lasagni, D. Yuan, P. Shao, and S. Das, "Fabrication of periodic microstructures in pentaerythritol triacrylate through femtosecond laser interference two-photon polymerization," Adv. Eng. Mater. 11(7), pp. 595-599, 2009.
14. N. D. Lai, W. P. Liang, J. H. Lin, and C. C. Hsu, "Rapid fabrication of large-area periodic structures containing well-defined defects by combining holography and mask techniques," Opt. Expr. 13(14), pp. 5331-5337, 2005.
15. T. Kondo, S. Juodkazis, V. Mizeikis, S. Matsuo, and H. Misawa, "Fabrication of three-dimensional periodic microstructures in photoresist su-8 by phase-controlled holographic lithography," New J. Phys. 8, p. 250, 2006.
16. L. G. Griffith and G. Naughton, "Tissue engineering: current challenges and expanding oportunities," Sci. 295(5557), pp. 1009-1014, 2002.
17. J. Ringe, C. Kaps, G. R. Burmester, and M. Sittinger, "Stem cells for regenerative medicine: advances in the engineering of tissues and organs," Naturwissenschaften 89(8), pp. 338-351, 2002.
18. M. Malinauskas, P. Danilevičius, D. Baltriukienė, M. Rutkauskas, A. Žukauskas, Ž. Kairytė, G. Bič kauskaitė, V. Purlys, D. Paipulas, V. Bukelskienė, and R. Gadonas, "3d artificial polymeric scaffolds for stem cell growth fabricated by femtosecond laser," Lith. J. Phys. 50(1), pp. 75-82, 2010.
19. M. Malinauskas, V. Purlys, M. Rutkauskas, A. Gaidukeviči?utė, and R. Gadonas, "Femtosecond visible light induced two-photon photopolymerization for 3d micro/nanostructuring in photoresists and photopolymers," Lith. J. Phys. 51(2), pp. 201-207, 2010.
20. A. Ovsianikov, J. Viertl, B. Chichkov, M. Oubaha, B. MacCraith, I. Sakellari, A. Giakoumaki, D. Gray, M. Vamvakaki, M. Farsari, and C. Fotakis, "Ultra-low shrinkage hybrid photosensitive material for twophoton polymerization microfabrication," ACS Nano 2(11), pp. 2257-2262, 2008.
21. S. Schlie, A. Ngezahayo, A. Ovsianikov, T. Fabian, H. A. Kolb, H. Haferkamp, and B. N. Chichkov, "Threedimensional cell growth on structures fabricated from ormocer by two-photon polymerization technique," J. Biomater. Appl. 22(3), pp. 1-14, 2007.
22. A. Ovsianikov, M. Malinauskas, S. Schlie, B. Chichkov, S. Gittard, R. Narayan, M. L?obler, K. Sternberg, K. Schmitz, and A. Haverich, "Three-dimensional laser micro- and nano-structuring of acrylated poly(ethylene glycol) materials and evaluation of their cytoxicity for tissue engineering applications," Acta Biomater. 7(3), pp. 967-974, 2011.
23. M. Malinauskas, V. Purlys, M. Rutkauskas, and R. Gadonas, "Two-photon polymerization for fabrication of three-dimensional micro- and nanostructures over a large area," Proceedings Vol. 7204 of conference of Micromachining and Microfabrication Process Technology XIV, San Jose, CA, USA, 2009.
24. J. C. Chachques, J. C. Trainini, N. Lago, M. Cortes-Morichetti, O. Schussler, and A. Carpentier, "Myocardial assistance by grafting a new bioartificial upgraded myocardium magnum trial: Clinical feasibility study," Ann. Thorac. Surg. 85(3), pp. 901-908, 2008.
25. J. Weng and M. Wang, "Producing chitin scaffolds with controlled pore size and interconnectivity for tissue engineering," J. Mater. Sci. Lett. 20(15), pp. 1401-1403, 2001.
26. S. J. Hollister, R. D. Maddox, and J. M. Taboas, "Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints," Biomater. 235(20), pp. 4095-4103, 2002.
27. L. T. de Jonge, S. C. G. Leeuwenburgh, J. G. C. Wolke, and J. A. Jansen, "Organicinorganic surface modifications for titanium implant surfaces," Pharm. Res. 25(10), pp. 2357-2369, 2008.
28. Y. Mi, Y. Chan, D. Trau, P. Huang, and E. Chen, "Micromolding of pdms scaffolds and microwells for tissue culture and cell patterning: A new method of microfabrication by the self-assembled micropatterns of diblock copolymer micelles," Polymer 47(14), pp. 5124-5130, 2006.
29. C. A. Coenjarts and C. K. Ober, "Two-photon three-dimensional microfabrication of poly(dimethylsiloxane) elastomers," Chem. Mater. 16(26), pp. 5556-5558, 2004.
30. Y. Xia and G. M. Whitesides, "Soft lithography," Annu. Rev. Mater. Sci. 28(1), pp. 153-184, 1998.
31. Y. J. Pan and R. J. Yang, "Fabrication of uv epoxy resin masters for the replication of pdms-based microchips," Biomed. Microdevices 9(4), pp. 555-563, 2007.
32. S. Qu, X. Chen, D. Chen, P. Yang, and G. Chen, "Poly(methyl methacrylate) ce microchips replicated from poly(dimethylsiloxane) templates for the determination of cations," Electrophoresis 27(24), pp. 4910-4918, 2006.
33. C. H. Choi, M. W. Lee, B. H. O, S. G. Lee, S. G. Park, and E. H. Lee, "Fabrication of micro-photonic devices using embossing technique," Microelectron. Eng. 83, pp. 1336-1338, 2006.