The effect of axial and oblique loading on the micromovement of dental implants

International Journal of Oral and Maxillofacial Implants

Volumn 26, Issue 2, 2011, Pages 257-264

  Goellner, Matthias ^a   Schmitt, Johannes ^a   Karl, Matthias ^a   Wichmann, Manfred ^a   Holst, Stefan ^a  

^a UNIVERSITY HOSPITAL ERLANGEN   (Germany)

Author keywords

Implant biomechanics; Implant loading; Optical measurement

Indexed keywords

POLYURETHAN;

ARTICLE; BIOMECHANICS; BONE; BONE DENSITY; BONE PROSTHESIS; CHEMISTRY; COMPARATIVE STUDY; DENTAL CARE; DENTAL SURGERY; DENTURE; HUMAN; IMAGE PROCESSING; INSTRUMENTATION; MATERIALS TESTING; MECHANICAL STRESS; METHODOLOGY; MOVEMENT (PHYSIOLOGY); PHOTOGRAPHY; PHYSIOLOGY; THREE DIMENSIONAL IMAGING; TOOTH IMPLANTATION; YOUNG MODULUS;

BIOMECHANICS; BONE AND BONES; BONE DENSITY; BONE SUBSTITUTES; DENTAL ABUTMENTS; DENTAL IMPLANTS; DENTAL SOLDERING; DENTAL STRESS ANALYSIS; ELASTIC MODULUS; HUMANS; IMAGE PROCESSING, COMPUTER-ASSISTED; IMAGING, THREE-DIMENSIONAL; MATERIALS TESTING; MOVEMENT; PHOTOGRAMMETRY; POLYURETHANES; STRESS, MECHANICAL;

EID: 80054822449     PISSN: 08822786     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (58)

1. Esposito M, Grusovin MG, Willings M, Coulthard P, Worthington HV. The effectiveness of immediate, early, and conventional loading of dental implants: A Cochrane systematic review of randomized controlled clinical trials. Int J Oral Maxillofac Implants 2007;22: 893-904.
2. Henry PJ, Liddelow GJ. Immediate loading of dental implants. Aust Dent J 2008;53: 69-81.
3. Ostman PO. Immediate/early loading of dental implants. Clinical documentation and presentation of a treatment concept. Periodontol 2000 2008;47: 90-112.
4. Nkenke E, Fenner M. Indications for immediate loading of implants and implant success. Clin Oral Implants Res 2006;17: 19-34.
5. Trisi P, Perfetti G, Baldoni E, Berardi D, Colagiovanni M, Scogna G. Implant micromotion is related to peak insertion torque and bone density. Clin Oral Implants Res 2009;20: 467-471.
6. Song YD, Jun SH, Kwon JJ. Correlation between bone quality evaluated by cone-beam computerized tomography and implant primary stability. Int J Oral Maxillofac Implants 2009; 24: 59-64.
7. Adell R, Eriksson B, Lekholm U, Brånemark PI, Jemt T. Longterm follow-up study of osseointegrated implants in the treatment of totally edentulous jaws. Int J Oral Maxillofac Implants 1990;5: 347-359.
8. Lekholm U, Zarb G. Patient selection and preparation. In: Brånemark PI, Zarb G, Lekholm U (eds). Tissue-Integrated Prostheses. Osseointegration in Clinical Dentistry. Chicago: Quintessence, 1985: 199-209.
9. Misch CE. Divisions of available bone in implant dentistry. Int J Oral Implantol 1990;7: 9-17.
10. Holmes DC, Loftus JT. Influence of bone quality on stress distribution for endosseous implants. J Oral Implantol 1997; 23: 104-111.
11. Martinez H, Davarpanah M, Missika P, Celletti R, Lazzara R. Optimal implant stabilization in low density bone. Clin Oral Implants Res 2001;12: 423-432.
12. Bischof M, Nedir R, Szmukler-Moncler S, Bernard JP, Samson J. Implant stability measurement of delayed and immediately loaded implants during healing. Clin Oral Implants Res 2004;15: 529-539.
13. Nkenke E, Hahn M, Weinzierl K, Radespiel-Troger M, Neukam FW, Engelke K. Implant stability and histomorphometry: A correlation study in human cadavers using stepped cylinder implants. Clin Oral Implants Res 2003;14: 601-609.
14. Borchers L, Reichart P. Three-dimensional stress distribution around a dental implant at different stages of interface development. J Dent Res 1983;62: 155-159.
15. Clelland NL, Lee JK, Bimbenet OC, Gilat A. Use of an axisymmetric finite element method to compare maxillary bone variables for a loaded implant. J Prosthodont 1993;2: 183-189.
16. Clelland NL, Lee JK, Bimbenet OC, Brantley WA. A three-dimensional finite element stress analysis of angled abutments for an implant placed in the anterior maxilla. J Prosthodont 1995;4: 95-100.
17. Kitamura E, Stegaroiu R, Nomura S, Miyakawa O. Influence of marginal bone resorption on stress around an implant-A three-dimensional finite element analysis. J Oral Rehabil 2005;32: 279-286.
18. Lin CL, Chang SH, Chang WJ, Kuo YC. Factorial analysis of variables influencing mechanical characteristics of a single tooth implant placed in the maxilla using finite element analysis and the statistics-based Taguchi method. Eur J Oral Sci 2007;115: 408-416.
19. Hsu ML, Chen FC, Kao HC, Cheng CK. Influence of off-axis loading of an anterior maxillary implant: A 3-dimensional finite element analysis. Int J Oral Maxillofac Implants 2007;22: 301-309.
20. Duyck J, Van OH, Vander SJ, De CM, Puers R, Naert I. Magnitude and distribution of occlusal forces on oral implants supporting fixed prostheses: An in vivo study. Clin Oral Implants Res 2000;11: 465-475.
21. Isidor F. Loss of osseointegration caused by occlusal load of oral implants. A clinical and radiographic study in monkeys. Clin Oral Implants Res 1996;7: 143-152.
22. Isidor F. Histological evaluation of peri-implant bone at implants subjected to occlusal overload or plaque accumulation. Clin Oral Implants Res 1997;8: 1-9.
23. Krekmanov L, Kahn M, Rangert B, Lindstrom H. Tilting of posterior mandibular and maxillary implants for improved prosthesis support. Int J Oral Maxillofac Implants 2000;15: 405-414.
24. Calandriello R, Tomatis M. Simplified treatment of the atrophic posterior maxilla via immediate/early function and tilted implants: A prospective 1-year clinical study. Clin Implant Dent Relat Res 2005;7: 1-12.
25. Balshi TJ, Ekfeldt A, Stenberg T, Vrielinck L. Three-year evaluation of Brånemark implants connected to angulated abutments. Int J Oral Maxillofac Implants 1997;12: 52-58.
26. Aparicio C, Perales P, Rangert B. Tilted implants as an alternative to maxillary sinus grafting: A clinical, radiologic, and Periotest study. Clin Implant Dent Relat Res 2001;3: 39-49.
27. Koutouzis T, Wennstrom JL. Bone level changes at axial- and non-axial-positioned implants supporting fixed partial denture. A 5-year retrospective longitudinal study. Clin Oral Implants Res 2007;18: 585-590.
28. Karl M, Dickinson A, Holst S, Holst A. Biomechanical methods applied in dentistry: A comparative overview of photoelastic examinations, strain gauge measurements, finite element analysis and three-dimensional deformation analysis. Eur J Prosthodont Restorative Dent 2009;17: 50-57.
29. Soballe K, Brockstedt-Rasmussen H, Hansen ES, Bunger C. Hydroxyapatite coating modifies implant membrane formation. Controlled micromotion studied in dogs. Acta Orthop Scand 1992;63: 128-140.
30. Szmukler-Moncler S, Salama H, Reingewirtz Y, Dubruille JH. Timing of loading and effect of micromotion on bone-dental implant interface: Review of experimental literature. J Biomed Mater Res 1998;43: 192-203.
31. Duyck J, Vandamme K, Geris L, et al. The influence of micromotion on the tissue differentiation around immediately loaded cylindrical turned titanium implants. Arch Oral Biol 2006;51: 1-9.
32. Vandamme K, Naert I, Geris L, Vander SJ, Puers R, Duyck J. The effect of micro-motion on the tissue response around immediately loaded roughened titanium implants in the rabbit. Eur J Oral Sci 2007;115: 21-29.
33. Oh JS, Kim SG, Lim SC, Ong JL. A comparative study of two noninvasive techniques to evaluate implant stability: Periotest and Osstell Mentor. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2009;107: 513-518.
34. Burke PH, Banks P, Beard LF, Tee JE, Hughes C. Stereophotographic measurement of change in facial soft tissue morphology following surgery. Br J Oral Surg 1983;21: 237-245.
35. Holst AI, Karl M, Karolczak M, Goellner M, Holst S. Quantitative assessment of orthodontic mini-implant displacement: The effect of initial force application. Quintessence Int 2010;41: 59-66.
36. Holst S, Geiselhoeringer H, Wichmann M, Holst AI. The effect of provisional restoration type on micromovement of implants. J Prosthet Dent 2008;100: 173-182.
37. Holst S, Blatz MB, Bergler M, Goellner M, Wichmann M. Influence of impression material and time on the 3-dimensional accuracy of implant impressions. Quintessence Int 2007;38: 67-73.
38. Gollner M, Holst A, Berthold C, Schmitt J, Wichmann M, Holst S. Noncontact intraoral measurement of force-related tooth mobility. Clin Oral Investig 2010;14: 551-557.
39. Tyson J, Schmidt T, Galanulis K. Biomechanics deformation and strain measurements with 3D image correlation photogrammetry. Exp Techn 2002;26: 39-42.
40. Luhmann T, Robson S, Kyle S, Harley I. Close Range Photogrammetry: Principles, Techniques and Applications. Dunbeath, Scotland: Whittles, 2006: 319-397.
41. Berfield T, Patel J, Shimmin R, Braun P, Lambros J, Sottos N. Micro- and nanoscale deformation measurement of surface and internal planes via digital image correlation. Exp Mech 2007;47: 51-62.
42. Bing P, Hui-min X, Bo-qin X, Fu-long D. Performance of subpixel registration algorithms in digital image correlation. Meas Sci Technol 2006;17: 1615-1621.
43. Lehmann EL. Nonparametrics: Statistical Methods Based on Ranks. New York: Springer, 1998.
44. Lioubavina-Hack N, Lang NP, Karring T. Significance of primary stability for osseointegration of dental implants. Clin Oral Implants Res 2006;17: 244-250.
45. Eliyas S, Al-Khayatt AS. No difference between failure rates of early and conventionally loaded implants. Evid Based Dent 2008;9: 50-54.
46. Lin CL, Wang JC, Ramp LC, Liu PR. Biomechanical response of implant systems placed in the maxillary posterior region under various conditions of angulation, bone density, and loading. Int J Oral Maxillofac Implants 2008;23: 57-64.
47. Lachmann S, Laval JY, Jager B, et al. Resonance frequency analysis and damping capacity assessmen. Part 2: Periimplant bone loss follow-up. An in vitro study with the Periotest and Osstell instruments. Clin Oral Implants Res 2006;17: 80-84.
48. Seong WJ, Kim UK, Swift JQ, Hodges JS, Ko CC. Correlations between physical properties of jawbone and dental implant initial stability. J Prosthet Dent 2009;101: 306-318.
49. Brunski JB. Biomechanical factors affecting the bone-dental implant interface. Clin Mater 1992;10: 153-201.
50. Gratton DG, Aquilino SA, Stanford CM. Micromotion and dynamic fatigue properties of the dental implant-abutment interface. J Prosthet Dent 2001;85: 47-52.
51. Meng JC, Everts JE, Qian F, Gratton DG. Influence of connection geometry on dynamic micromotion at the implantabutment interface. Int J Prosthodont 2007;20: 623-625.
52. Finkelstein JA, Anderson GI, Waddell JP, Richards RR, Hearn TC, Schemitsch E. A study of micromotion and appositional bone growth to a canine madreporic-surfaced femoral component. J Arthroplasty 1994;9: 317-324.
53. Meijer HJ, Starmans FJ, Bosman F, Steen WH. A comparison of three finite element models of an edentulous mandible provided with implants. J Oral Rehabil 1993;20: 147-157.
54. Bredbenner TL, Haug RH. Substitutes for human cadaveric bone in maxillofacial rigid fixation research. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2000;90: 574-580.
55. Gibson LJ. The mechanical behaviour of cancellous bone. J Biomech 1985;18: 317-328.
56. Tabassum A, Meijer GJ, Wolke JG, Jansen JA. Influence of the surgical technique and surface roughness on the primary stability of an implant in artificial bone with a density equivalent to maxillary bone: A laboratory study. Clin Oral Implants Res 2009;20: 327-332.
57. Meredith N. Assessment of implant stability as a prognostic determinant. Int J Prosthodont 1998;11: 491-501.
58. Schmidt T, Tyson J, Galanulis K. Full-field dynamic displacement and strain measurement using advanced 3D image correlation photogrammetry: Part 1. Exp Techniques 2003;27: 47-50.