Influence of the surgical technique and surface roughness on the primary stability of an implant in artificial bone with a density equivalent to maxillary bone: A laboratory study

Clinical Oral Implants Research

Volumn 20, Issue 4, 2009, Pages 327-332

  Tabassum, Afsheen ^a   Meijer, Gert J ^a   Wolke, Johannes G C ^a   Jansen, John A ^a  

^a RADBOUD UNIVERSITY MEDICAL CENTER   (Netherlands)

Author keywords

Bone density; Dental implants; Primary stability; Surface roughness; Surgical technique

Indexed keywords

ANALYSIS OF VARIANCE; ARTICLE; BIOMECHANICS; BONE PROSTHESIS; COMPARATIVE STUDY; DENTAL CARE; DENTAL ETCHING; DENTAL SURGERY; DEVICE REMOVAL; INSTRUMENTATION; MECHANICAL STRESS; METHODOLOGY; SURFACE PROPERTY; TOOTH IMPLANTATION; TOOTH PROSTHESIS; TORQUE;

ANALYSIS OF VARIANCE; BIOMECHANICS; BONE SUBSTITUTES; DENTAL ETCHING; DENTAL IMPLANTATION, ENDOSSEOUS; DENTAL IMPLANTS; DENTAL PROSTHESIS DESIGN; DENTAL PROSTHESIS RETENTION; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; DEVICE REMOVAL; STRESS, MECHANICAL; SURFACE PROPERTIES; TORQUE;

EID: 62249165049     PISSN: 09057161     EISSN: 16000501     Source Type: Journal    
DOI: 10.1111/j.1600-0501.2008.01692.x     Document Type: Article

References (51)

1. Abrahamsson, I., Berglundh, T., Linder, E., Lang, N.P. Lindhe, J. (2004) Early bone formation adjacent to rough and turned endosseous implant surfaces. An experimental study in the dog. Clinical Oral Implants Research 15 : 381 392.
2. Adell, R., Eriksson, B., Lekholm, U., Branemark, P.I. Jemt, T. (1990) Long-term follow-up study of osseointegrated implants in the treatment of totally edentulous jaws. International Journal of Oral & Maxillofacial Implants 5 : 347 359.
3. Adell, R., Lekholm, U., Rockler, B. Branemark, P.I. (1981) A 15-year study of osseointegrated implants in the treatment of the edentulous jaw. International Journal of Oral Surgery 1 : 387 416.
4. Ahlqvist, J., Borg, K., Gunne, J., Nilson, H., Olsson, M. Astrand, P. (1990) Osseointegrated implants in edentulous jaws: a 2-year longitudinal study. International Journal of Oral & Maxillofacial Implants 5 : 155 163.
5. Albrektsson, T., Branemark, P.I., Hansson, H.A. Lindstrom, J. (1981) Osseointegrated titanium implants. Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man. Acta Orthopaedica Scandinavica 52 : 155 170.
6. Alsaadi, G., Quirynen, M., Komarek, A. van Steenberghe, D. (2007b) Impact of local and systemic factors on the incidence of oral implant failures, up to abutment connection. Journal of Clinical Periodontology 34 : 610 617.
7. Atsumi, M., Park, S.H. Wang, H.L. (2007) Methods used to assess implant stability: current status. International Journal of Oral & Maxillofacial Implants 22 : 743 754.
8. Beer, A., Gahleitner, A., Holm, A., Birkfellner, W. Homolka, P. (2007) Adapted preparation technique for screw-type implants: explorative in vitro pilot study in a porcine bone model. Clinical Oral Implants Research 18 : 103 107.
9. Beer, A., Gahleitner, A., Holm, A., Tschabitscher, M. Homolka, P. (2003) Correlation of insertion torques with bone mineral density from dental quantitative CT in the mandible. Clinical Oral Implants Research 14 : 616 620.
10. Borsari, V., Giavaresi, G., Fini, M., Torricelli, P., Salito, A., Chiesa, R., Chiusoli, L., Volpert, A., Rimondini, L. Giardino, R. (2005) Physical characterization of different-roughness titanium surfaces, with and without hydroxyapatite coating, and their effect on human osteoblast-like cells. Journal of Biomedical Materials Research. Part B, Applied Biomaterials 75 : 359 368.
11. Branemark, P.I., Hansson, B.O., Adell, R., Breine, U., Lindstrom, J., Hallen, O. Ohman, A. (1977) Osseointegrated implants in the treatment of the edentulous jaw. Experience from a 10-year period. Scandinavian Journal of Plastic and Reconstructive Surgery (Suppl.) 16 : 1 132.
12. Buchter, A., Kleinheinz, J., Joos, U. Meyer, U. (2003) Primary implant stability with different bone surgery techniques. An in vitro study of the mandible of the minipig. Mund-, Kiefer- und Gesichtschirurgie 7 : 351 355.
13. Cochran, D.L., Nummikoski, P.V., Higginbottom, F.L., Hermann, J.S., Makins, S.R. Buser, D. (1996) Evaluation of an endosseous titanium implant with a sandblasted and acid-etched surface in the canine mandible: radiographic results. Clinical Oral Implants Research 7 : 240 252.
14. Cochran, D.L., Schenk, R.K., Lussi, A., Higginbottom, F.L. Buser, D. (1998) Bone response to unloaded and loaded titanium implants with a sandblasted and acid-etched surface: a histometric study in the canine mandible. Journal of Biomedical Material Research 40 : 1 11.
15. Devlin, H., Horner, K. Ledgerton, D. (1998) A comparison of maxillary and mandibular bone mineral densities. The Journal of Prosthetic Dentistry 79 : 323 327.
16. Friberg, B., Ekestubbe, A., Mellstrom, D. Sennerby, L. (2001) Branemark implants and osteoporosis: a clinical exploratory study. Clinical Implant Dentistry & Related Research 3 : 50 56.
17. Friberg, B., Ekestubbe, A. Sennerby, L. (2002) Clinical outcome of Branemark System implants of various diameters: a retrospective study. Inernational Journal of Oral & Maxillofacial Implants 17 : 671 677.
18. Friberg, B., Sennerby, L., Roos, J., Johansson, P., Strid, C.G. Lekholm, U. (1995) Evaluation of bone density using cutting resistance measurements and microradiography: an in vitro study in pig ribs. Clinical Oral Implants Research 6 : 164 171.
19. Glauser, R., Ree, A., Lundgren, A., Gottlow, J., Hammerle, C.H. Scharer, P. (2001) Immediate occlusal loading of Branemark implants applied in various jawbone regions: a prospective, 1-year clinical study. Clinical Implant Dentistry & Related Research 3 : 204 213.
20. Han, C.H., Johansson, C.B., Wennerberg, A. Albrektsson, T. (1998) Quantitative and qualitative investigations of surface enlarged titanium and titanium alloy implants. Clinical Oral Implants Research 9 : 1 10.
21. Hansson, S. (1999) The implant neck: smooth or provided with retention elements. A biomechanical approach. Clinical Oral Implants Research 10 : 394 405.
22. Homolka, P., Beer, A., Birkfellner, W., Nowotny, R., Gahleitner, A., Tschabitscher, M. Bergmann, H. (2002) Bone mineral density measurement with dental quantitative CT prior to dental implant placement in cadaver mandibles: pilot study. Radiology 224 : 247 252.
23. Jaffin, R.A. Berman, C.L. (1991) The excessive loss of Branemark fixtures in type IV bone: a 5-year analysis. Journal of Periodontology 62 : 2 4.
24. Johansson, P. Strid, K.G. (1994) Assessment of bone quality from cutting resistance during implants surgery. International Journal of Oral & Maxillofacial Implants 9 : 279 288.
25. Khang, W., Feldman, S., Hawley, C.E. Gunsolley, J. (2001) A multi-center study comparing dual acid-etched and machined-surfaced implants in various bone qualities. Journal of Periodontology 72 : 1384 1390.
26. Lazzara, R., Siddiqui, A.A., Binon, P., Feldman, S.A., Weiner, R., Phillips, R. Gonshor, A. (1996) Retrospective multicenter analysis of 3i endosseous dental implants placed over a five-year period. Clinical Oral Implants Research 7 : 73 83.
27. Lioubavina-Hack, N., Lang, N.P. Karring, T. (2006) Significance of primary stability for osseointegration of dental implants. Clinical Oral Implants Research 17 : 244 250.
28. Listgarten, M.A. (1997) Clinical trials of endosseous implants: issues in analysis and interpretation. Annals of PeriodontologyThe American Academy of Periodontology 2 : 299 313.
29. Martinez, H., Davarpanah, M., Missika, P., Celletti, R. Lazzara, R. (2001) Optimal implant stabilization in low density bone. Clinical Oral Implants Research 12 : 423 32.
30. Meredith, N. (1998) Assessment of implant stability as a prognostic determinant. The International Journal of Prosthodontics 11 : 491 501.
31. 2 particles on the initial attachment of cells derived from human mandibular bone. A scanning electron microscopic and histomorphometric analysis. Clinical Oral Implants Research 11 : 116 28.
32. O'Sullivan, D., Sennerby, L., Jagger, D. Meredith, N. (2004) A comparison of two methods of enhancing implant primary stability. Clinical Implant Dentistry & Related Research 6 : 48 57.
33. Saadoun, A.P., Le Gall, M.G. Touati, B. (2004) Current trends in implantology: Part 1 - Biological response, implant stability, and implant design. Practical Procedures and Aesthetic Dentistry 16 : 529 535 quiz 536, 521.
34. Sakoh, J., Wahlmann, U., Stender, E., Nat, R., Al-Nawas, B. Wagner, W. (2006) Primary stability of a conical implant and a hybrid, cylindric screw-type implant in vitro. International Journal of Oral & Maxillofacial Implants 21 : 560 566.
35. Sennerby, L. Roos, J. (1998) Surgical determinants of clinical success of osseointegrated oral implants: a review of the literature. The International Journal of Prosthodontics 11 : 408 420.
36. Sennerby, L., Thomsen, P. Ericson, L.E. (1992) A morphometric and biomechanic comparison of titanium implants inserted in rabbit cortical and cancellous bone. International Journal of Oral & Maxillofacial Implants 7 : 62 71.
37. Sevimay, M., Turhan, F., Kilicarslan, M.A. Eskitascioglu, G. (2005) Three-dimensional finite element analysis of the effect of different bone quality on stress distribution in an implant-supported crown. The Journal of Prosthetic Dentistry 93 : 227 234.
38. Shalabi, M.M., Wolke, J.G., de Ruijter, A.J. Jansen, J.A. (2007) A mechanical evaluation of implants placed with different surgical techniques into the trabecular bone of goats. The Journal of Oral Implantology 33 : 51 58.
39. Shalabi, M.M., Wolke, J.G. Jansen, J.A. (2006) The effects of implant surface roughness and surgical technique on implant fixation in an in vitro model. Clinical Oral Implants Research 17 : 172 178.
40. Summers, R.B. (1994a) A new concept in maxillary implant surgery: the osteotome technique. Compendium 15 : 152, 154 156, 158 passim; quiz 162.
41. Summers, R.B. (1994b) The osteotome technique: part 2 - the ridge expansion osteotomy (REO) procedure. Compendium 15 : 422, 424, 426, passim; quiz 436.
42. Summers, R.B. (1994c) The osteotome technique: part 3 - less invasive methods of elevating the sinus floor. Compendium 15 : 698, 700, 702 704, passim; quiz 710.
43. Testori, T., Wiseman, L., Woolfe, S. Porter, S.S. (2001) A prospective multicenter clinical study of the Osseotite implant: four-year interim report. International Journal of Oral & Maxillofacial Implants 16 : 193 200.
44. Veis, A.A., Papadimitriou, S., Trisi, P., Tsirlis, A.T., Parissis, N.A. Kenealy, J.N. (2007) Osseointegration of osseotite and machined-surfaced titanium implants in membrane-covered critical-sized defects: a histologic and histometric study in dogs. Clinical Oral Implants Research 18 : 153 160.
45. Vercaigne, S., Wolke, J.G., Naert, I. Jansen, J.A. (1998) The effect of titanium plasma-sprayed implants on trabecular bone healing in the goat. Biomaterials 19 : 1093 1099.
46. Weng, D., Hoffmeyer, M., Hurzeler, M.B. Richter, E.J. (2003) Osseotite vs. machined surface in poor bone quality. A study in dogs. Clinical Oral Implants Research 14 : 703 708.
47. Wennerberg, A. (1996c) On surface roughness and implant incorporation. PhD Thesis, Göteborg.
48. Wennerberg, A., Albrektsson, T., Johansson, C. Andersson, B. (1996a) Experimental study of turned and grit-blasted screw-shaped implants with special emphasis on effects of blasting material and surface topography. Biomaterials 17 : 15 22.
49. Wennerberg, A., Albrektsson, T. Lausmaa, J. (1996b) Torque and histomorphometric evaluation of c.p. titanium screws blasted with 25- and 75-microns-sized particles of Al2O3. Journal of Biomedical Materials Research 30 : 251 260.
50. Wennerberg, A., Ektessabi, A., Albrektsson, T., Johansson, C. Andersson, B. (1997) A 1-year follow-up of implants of differing surface roughness placed in rabbit bone. International Journal of Oral & Maxillofacial Implants 12 : 486 494.
51. Zarb, G.A. Schmitt, A. (1990) The longitudinal clinical effectiveness of osseointegrated dental implants: the Toronto study. Part III: problems and complications encountered. The Journal of Prosthetic Dentistry 64 : 185 194.