Occlusal geometrical considerations in all-ceramic pre-molar crown failure testing

Dental Materials

Volumn 27, Issue 11, 2011, Pages 1127-1134

  Sornsuwan, Tanapon ^a   Ellakwa, Ayman ^a   Swain, Michael V ^a,b  

^a UNIVERSITY OF SYDNEY   (Australia)

^b UNIVERSITY OF FREIBURG   (Germany)

Author keywords

All ceramic crowns; Crown fracture; Cusp angle; Notch stress; Weibull analysis

Indexed keywords

ALL-CERAMIC; CROSSHEAD SPEED; CROWN FAILURE; CUSP ANGLE; EFFECTIVE RADIUS; FAILURE LOAD; FAILURE TEST; FRACTURE LOAD; GEOMETRICAL CONSIDERATIONS; MATERIAL SELECTION; NOTCH RADII; NOTCH STRESS; NOTCH-ROOT; WEIBULL ANALYSIS; WEIBULL MODULUS;

CERAMIC MATERIALS; DENTAL PROSTHESES; LOAD TESTING; RATING; STRESS CONCENTRATION; WEIBULL DISTRIBUTION; ZIRCONIA;

FRACTURE;

ARTICLE; COMPUTER AIDED DESIGN; DENTAL PROCEDURE; DENTAL SURGERY; DENTURE; HISTOLOGY; HUMAN; PREMOLAR TOOTH; SCANNING ELECTRON MICROSCOPY; SURVIVAL; TOOTH CROWN; TOOTH IMPLANTATION; TOOTH OCCLUSION; TOOTH PROSTHESIS;

BICUSPID; COMPUTER-AIDED DESIGN; CROWNS; DENTAL ABUTMENTS; DENTAL IMPLANTS; DENTAL OCCLUSION; DENTAL PORCELAIN; DENTAL PROSTHESIS DESIGN; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; DENTAL VENEERS; HUMANS; MICROSCOPY, ELECTRON, SCANNING; SURVIVAL ANALYSIS;

EID: 80053645151     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2011.08.005     Document Type: Article

References (38)

1. A.J. Raigrodski Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature Journal of Prosthetic Dentistry 92 6 2004 557 562 (Pubitemid 39593586)
2. S. Pilathadka, and D. Vahalova Contemporary all-ceramic materials. Part-1 Acta Medica (Hradec Kralove) 50 2 2007 101 104
3. S.O. Hondrum A review of the strength properties of dental ceramics Journal of Prosthetic Dentistry 67 June (6) 1992 859 865
4. H.J. Conrad, W.J. Seong, and G.J. Pesun Current ceramic materials and systems with clinical recommendations: a systematic review Journal of Prosthetic Dentistry 98 5 2007 389 404
5. J.R. Kelly Clinically relevant approach to failure testing of all-ceramic restorations 1999 Mosby-Year Book Inc.
6. A. Attia, and M. Kern Fracture strength of all-ceramic crowns luted using two bonding methods 2004 Mosby, Inc.
7. J.F. Esquivel-Upshaw, and K.J. Anusavice Ceramic design concepts based on stress distribution analysis Compendium of Continuing Education in Dentistry 21 8 2000 649 652 54; quiz 56
8. E.D. Rekow, M. Harsono, M. Janal, V.P. Thompson, and G.M. Zhang Factorial analysis of variables influencing stress in all-ceramic crowns Dental Materials 22 February (2) 2006 125 132 (Pubitemid 43061311)
9. A. Della Bona, and J.R. Kelly The clinical success of all-ceramic restorations Journal of the American Dental Association September (139) 2008 8S 13S
10. F.J.T. Burke, G.J.P. Fleming, D. Nathanson, and P.M. Marquis Are adhesive technologies needed to support ceramics? An assessment of the current evidence Journal of Adhesive Dentistry 4 1 2002 7 22 (Pubitemid 44146462)
11. D. Rekow, and V.P. Thompson Engineering long term clinical success of advanced ceramic prostheses 2007 Springer
12. F.J. Burke, and D.C. Watts Fracture resistance of teeth restored with dentin-bonded crowns Quintessence International 25 5 1994 335 340
13. M. Lang, S. McHugh, and F.J.T. Burke In vitro fracture resistance of teeth with dentin-bonded ceramic crowns and core build-ups American Journal of Dentistry September 2003 16 Spec No: 88A-96A
14. F.J. Burke Fracture resistance of teeth restored with dentin-bonded crowns: the effect of increased tooth preparation Quintessence International 27 2 1996 115 121 (Pubitemid 126699233)
15. F. Beuer, J. Schweiger, M. Eichberger, H.F. Kappert, W. Gernet, and D. Edelhoff High-strength CAD/CAM-fabricated veneering material sintered to zirconia copings - a new fabrication mode for all-ceramic restorations Dental Materials 25 January (1) 2009 121 128
16. M.N. Aboushelib, A.J. Feilzer, and C.J. Kleverlaan Bridging the gap between clinical failure and laboratory fracture strength tests using a fractographic approach Dental Materials 25 March (3) 2009 383 391
17. X.D. Dong, and B.W. Darvell Stress distribution and failure mode of dental ceramic structures under Hertzian indentation Dental Materials 19 September (6) 2003 542 551
18. B. Lawn, S. Bhowmick, M.B. Bush, T. Qasim, E.D. Rekow, and Y. Zhang Failure modes in ceramic-based layer structures: A basis for materials design of dental crowns Journal of the American Ceramic Society 90 June (6) 2007 1671 1683 (Pubitemid 46863323)
19. Y.J. Yi, and J.R. Kelly Effect of occlusal contact size on interfacial stresses and failure of a bonded ceramic: FEA and monotonic loading analyses Dental Materials 24 March (3) 2008 403 409
20. E. Koyoumdjisky The correlation of the inclined planes of the articular surface of the glenoid fossa with the cuspal and palatal slopes of the teeth Journal of Dental Research 35 6 1956 890 901
21. I.R. Spears, and R.H. Crompton The mechanical significance of the occlusal geometry of great ape molars in food breakdown Journal of Human Evolution 31 December (6) 1996 517 535
22. S.C. Khera, C.W. Carpenter, J.D. Vetter, and R.N. Staley Anatomy of cusps of posterior teeth and their fracture potential Journal of Prosthetic Dentistry 64 2 1990 139 147
23. C.E. Inglis stresses in a plate due to the presence of cracks and sharp corners Transactions of the Institution of Naval Architects 55 1913 219 230
24. P. Magne, and U.C. Belser Porcelain versus composite inlays/onlays: effects of mechanical loads on stress distribution. Adhesion, and crown flexure International Journal of Periodontics and Restorative Dentistry 23 December (6) 2003 543 555 (Pubitemid 37501201)
25. B.R. Lawn, Y. Deng, and V.P. Thompson Use of contact testing in the characterization and design of all-ceramic crownlike layer structures: a review 2001 Mosby, Inc.
26. T. Qasim, M.B. Bush, X.Z. Hu, and B.R. Lawn Contact damage in brittle coating layers: influence of surface curvature Journal of Biomedical Materials Research Part B: Applied Biomaterials 73B April (1) 2005 179 185 (Pubitemid 40478274)
27. T. Qasim, C. Ford, M.B. Bush, X.Z. Hu, K.A. Malament, and B.R. Lawn Margin failures in brittle dome structures: relevance to failure of dental crowns Journal of Biomedical Materials Research Part B: Applied Biomaterials 80B January (1) 2007 78 85 (Pubitemid 46034409)
28. J.R. Kelly, S.D. Campbell, and H.K. Bowen Fracture-surface analysis of dental ceramics Journal of Prosthetic Dentistry. 62 November (5) 1989 536 541
29. P.G. Coelho, N.R. Silva, E.A. Bonfante, P.C. Guess, E.D. Rekow, and V.P. Thompson Fatigue testing of two porcelain-zirconia all-ceramic crown systems Dental Materials 2009 [Epub 25(April (9)):1122-7]
30. E. Tsalouchou, M.J. Cattell, J.C. Knowles, P. Pittayachawan, and A. McDonald Fatigue and fracture properties of yttria partially stabilized zirconia crown systems Dental Materials 24 March (3) 2008 308 318 (Pubitemid 351146667)
31. B. Webber, A. McDonald, and J. Knowles An in vitro study of the compressive load at fracture of Procera AllCeram crowns with varying thickness of veneer porcelain Journal of Prosthetic Dentistry 89 February (2) 2003 154 160 (Pubitemid 37323913)
32. Z. Harrington, A. McDonald, and J. Knowles An in vitro study to investigate the load at fracture of Procera AllCerarn crowns with various thickness of occlusal veneer porcelain International Journal of Prosthodontics 16 January-February (1) 2003 54 58 (Pubitemid 37161822)
33. A. Shirakura, H. Lee, A. Geminiani, C. Ercoli, and C. Feng The influence of veneering porcelain thickness of all-ceramic and metal ceramic crowns on failure resistance after cyclic loading Journal of Prosthetic Dentistry 101 February (2) 2009 119 127
34. M.P. Savruk, and A. Kazberuk Two-dimensional fracture mechanics problems for solids with sharp and rounded V-notches International Journal of Fracture 161 January (1) 2010 79 95
35. E.A. Bonfante, N. da Silva, P.G. Coelho, D.E. Bayardo-Gonzalez, V.P. Thompson, and G. Bonfante Effect of framework design on crown failure European Journal of Oral Sciences 117 April (2) 2009 194 199
36. M.V. Swain Unstable cracking (chipping) of veneering porcelain on all-ceramic dental crowns and fixed partial dentures Acta Biomaterials 5 June (5) 2009 1668 1677
37. B. Taskonak, J. Yan, J.J. Mecholsky, A. Sertgoz, and A. Kocak Fractographic analyses of zirconia-based fixed partial dentures Dental Materials 24 August (8) 2008 1077 1082
38. T. Salinas, and S. Eckert Implant-supported single crowns predictably survive to five years with limited complications Journal of Evidence Based Dental Practice 10 1 2010 56 57