Stress distribution and failure mode of dental ceramic structures under Hertzian indentation

Dental Materials

Volumn 19, Issue 6, 2003, Pages 542-551

  Dong, X D ^a   Darvell, B W ^a  

^a UNIVERSITY OF HONG KONG   (Hong Kong)

Author keywords

Ceramic strength; Dental materials; Hertzian indentation; Stress distribution

Indexed keywords

DENTAL MATERIALS; FAILURE (MECHANICAL); INDENTATION; STRESS CONCENTRATION; SUBSTRATES; SURFACE PROPERTIES; TENSILE STRENGTH;

CERAMIC STRUCTURE;

CERAMIC MATERIALS;

ALUMINUM SILICATE; IPS EMPRESS CERAMIC; IPS-EMPRESS CERAMIC; RESIN CEMENT;

ARTICLE; DENTAL BONDING; DENTAL CARE; DENTAL SURGERY; ELASTICITY; FINITE ELEMENT ANALYSIS; HARDNESS; MATERIALS TESTING; MECHANICAL STRESS; TENSILE STRENGTH; TOOTH PROSTHESIS;

ALUMINUM SILICATES; DENTAL BONDING; DENTAL PORCELAIN; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; ELASTICITY; FINITE ELEMENT ANALYSIS; HARDNESS; HARDNESS TESTS; MATERIALS TESTING; RESIN CEMENTS; STRESS, MECHANICAL; TENSILE STRENGTH;

EID: 0041491460     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0109-5641(02)00103-3     Document Type: Article

References (43)

1. Kelly J.R., Giordano R., Pober R., Cima M.J. Fracture-surface analysis of dental ceramic: clinically failed restorations. Int J Prosthodont. 3:(5):1990;430-440.
2. Scherrer S.S., de Rijk W.G. The fracture resistance of all-ceramic crowns on supporting structures with different elastic moduli. Int J Prosthodont. 6:(5):1993;462-467.
3. Smith T.B., Kelly J.R., Tesk J.A. In vitro fracture behaviour of ceramic and metal-ceramic restorations. J Prosthodont. 3:1994;138-144.
4. Thompson J.Y., Anusavice K.J., Naman A., Morris H.F. Fracture surface characterization of clinically failed all-ceramic crowns. J Dent Res. 73:(12):1994;1824-1832.
5. Yoshinari M., Dérand T. Fracture strength of all-cerarnic crowns. Int J Prosthodont. 7:(4):1994;329-338.
6. Carrier D.D., Kelly J.R. In-Ceram failure behavior and core-veneer interface quality as influenced by residual infiltration glass. J Prosthodont. 4:(4):1995;237-242.
7. Kelly J.R., Tesk J.A., Sorensen J.A. Failure of all-ceramic crown fixed partial dentures in vivo and in vitro: analysis and modeling. J Dent Res. 74:(6):1995;1253-1258.
8. Kelly J.R. Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent. 81:1999;652-661.
9. Kelly J.R., Campbell S.D., Bowen H.K. Fracture surface analysis of dental ceramics. J Prosthet Dent. 62:1989;531-541.
10. Hojjatie B., Anusavice K.J. Three-dimensional finite element analysis of glass-ceramic crown. J Biomech. 23:(11):1990;1157-1166.
11. Anusavice K.J., Hojjatie B. Tensile stress in glass-ceramic crowns: effect of flaws and cement voids. Int J Prosthodont. 5:(4):1992;351-358.
12. Harvey C.K., Kelly J.R. Contact damage as a failure mode during in vitro testing. J Prosthodont. 5:(2):1996;95-100.
13. Peterson I.M., Pajares A., Lawn B.R., Thompson V.P., Rekow E.D. Mechanical characterization of dental ceramics by Hertzian contacts. J Dent Res. 77:(4):1998;589-602.
14. Peterson I.M., Wuttiphan S., Lawn B.R., Chyung K. Role of microstructure on contact damage and strength degradation of micaceous glass-ceramics. Dent Mater. 14:(1):1998;80-89.
15. Tsai Y.L., Petsche P.E., Anusavice K.J., Yang M.C. Influence of glass-ceramic thickness on Hertzian and bulk fracture mechanisms. Int J Prosthodont. 11:(1):1998;27-32.
16. Jung Y.G., Peterson I.M., Pajares A., Lawn B.R. Contact damage resistance and strength degradation of glass-infiltrated alumina and spinel ceramics. J Dent Res. 78:(3):1999;804-818.
17. Jung Y.G., Wuttiphan S., Peterson I.M., Lawn B.R. Damage modes in dental layer structure. J Dent Res. 78:(4):1999;887-897.
18. Rhee Y.W., Kim H.W., Deng Y., Lawn B.R. Contact-induced damage in ceramic coatings on compliant substrates: Fracture mechanics and design. J Am Ceram Soc. 84:(5):2001;1066-1072.
19. Lawn B.R., Deng Y., Thompson V.P. Use of contact testing in the characterization and design of all-ceramic crownlike layer structures: a review. J Prosthet Dent. 86:(5):2001;495-510.
20. Zhao H., Miranda P., Lawn B.R., Hu X.Z. Cracking in ceramic/metal/polymer trilayer systems. J Mater Res. 17:(5):2002;1102-1111.
21. Deng Y., Lawn B.R., Lloyd I.K. Characterization of damage modes in dental ceramic bilayer structures. J Biomed Mater Res. 63:(2):2002;137-145.
22. Lawn B.R. Indentation of ceramics with spheres: a century after Hertz. J Am Ceram Soc. 81:(8):1998;1977-1994.
23. Burke F.J., Watts D.C. Fracture resistance of teeth restored with dentine-bonded crown. Quint Int. 25:1994;335-340.
24. Wakabayashi N., Anusavice K.J. Crack initiation modes in bilayered alumina/porcelain disks as a function of core/veneer thickness ratio and supporting substrate stiffness. J Dent Res. 79:(6):2000;1398-1404.
25. Variolink II system for the adhesive luting of ceramic, composite and Ceromer/FRC restorations. 1998;Vivadent, Schaan, Liechtenstein.
26. Dong XD. Stress distribution and failure mode of dental ceramic structures under Hertzian indentation. PhD Thesis, The University of Hong Kong; 2001.
27. Chai H., Lawn B.R., Wuttiphan S. Fracture modes in brittle coatings with large interlayer modulus mismatch. J Mater Res. 14:(9):1999;3805-3817.
28. Lee K.S., Rhee Y.-W., Blackburn D.H., Lawn B.R. Cracking of bilayer coatings adhesively bonded to substrate of unlike modulus. J Mater Res. 15:(8):2000;1653-1656.
29. Renson C.E., Braden M. Experimental determination of the rigidity modulus, Poisson's ratio and elastic limit in shear of human dentine. Arch Oral Biol. 20:1975;43-47.
30. Meerbeek B.V., Willems G., Celis J.P., Roos J.R., Braem M., Lambrechts P., Vanherle G. Assessment by nano-indentation of the hardness and elasticity of the resin-dentine bonding area. J Dent Res. 72:(10):1993;1434-1442.
31. Scherrer S.S., de Rijk W.G., Belser U.C. Fracture resistance of human enamel and three all-ceramic crown systems: on extracted teeth. Int J Prosthodont. 9:1996;580-585.
32. Poolthong S., Mori T., Swain M. Determination of elastic modulus of dentin by small spherical diamond indenters. Dent Mater J. 20:(3):2001;227-236.
33. Lin C.P., Douglas W.H. Structure-property relations and crack resistance at the bovine dentine-enamel junction. J Dent Res. 73:(5):1994;1072-1078.
34. Xu H.H.K., Smith D.T., Jahanmir S., Romberg E., Kelly J.R., Thompson V.P., Rekow E.D. Indentation damage and mechanical properties of human enamel and dentine. J Dent Res. 77:(3):1998;472-480.
35. Thompson J.Y., Rapp M.M., Parker A.J. Microscopic and energy dispersive X-ray analysis of surface adaptation of dental cements to dental ceramic surfaces. J Prosthet Dent. 79:(4):1998;378-383.
36. Chai H., Lawn B.R. Role of adhesive interlayer in transverse fracture of brittle layer structures. J Mater Res. 15:(4):2000;1017-1023.
37. Kamposiora P., Papavasilious G., Bayne S.C., Felton D.A. Finite element analysis estimates of cement microfracture under complete veneer crowns. J Prosthet Dent. 71:1994;435-441.
38. Scherrer S.S., Mojon P., Belser U.G., Meyer J.M. The VITA hi-ceram crown system: A clinical and laboratory investigation. J Dent Res. 67:1988;214. Abstr. No. 811.
39. Davis D.R. Comparison of fit of two types of all-ceramic crowns. J Prosthet Dent. 59:1988;12-16.
40. Tuntiprawon M., Wilson P.R. The effect of cement thickness on the fracture strength of all-ceramic crowns. Aust Dent J. 40:(1):1995;17-21.
41. Scherrer S.S., de Rijk W.G., Belser U.G., Meyer J.M. Effect of cement film thickness on the fracture resistance of a machinable glass-ceramic. Dent Mater. 10:(5):1994;172-177.
42. Malament K.A., Socransky S.S. Survival of Dicor glass-ceramic dental restorations over 14 years. Part II: Effect of thickness of Dicor materials and design of tooth preparation. J Prosthet Dent. 81:(6):1999;662-667.
43. Baumeister T., Avallone E.A., Baumeister T. III. Marks' standard handbook for mechanical engineers. 1st ed :1978;McGraw-Hill, New York.