Effect of surface pre-treatments on the zirconia ceramic-resin cement microtensile bond strength

Dental Materials

Volumn 27, Issue 10, 2011, Pages 1024-1030

  Casucci, Alessio ^a   Monticelli, Francesca ^b   Goracci, Cecilia ^a   Mazzitelli, Claudia ^a   Cantoro, Amerigo ^a   Papacchini, Federica ^a   Ferrari, Marco ^a  

^a UNIVERSITY OF SIENA   (Italy)

^b UNIVERSITY OF ZARAGOZA   (Spain)

Author keywords

Bond strength; Resin cement; Surface treatment; Zirconia ceramic

Indexed keywords

ADHESIVE SYSTEMS; AIRBORNE PARTICLE; CERAMIC SURFACE; COMPOSITE CYLINDERS; ETCHING SOLUTIONS; H-BONDED; HIGH-STRENGTH; INTERFACIAL MORPHOLOGIES; MICRO-TENSILE BOND STRENGTH; MICROTENSILE; MODE DISTRIBUTION; MULTIPLE COMPARISON; PREMATURE FAILURES; RESIN CEMENT; SCANNING ELECTRON MICROSCOPES; SURFACE PRE-TREATMENTS; ZIRCONIA CERAMIC;

ABRASION; BOND (MASONRY); BOND STRENGTH (MATERIALS); CEMENTS; CERAMIC MATERIALS; CYLINDERS (SHAPES); ETCHING; RESINS; SCANNING ELECTRON MICROSCOPY; SURFACE TREATMENT; SURFACES; ZIRCONIUM;

ZIRCONIA;

CALIBRA; DENTIN BONDING AGENT; RESIN; RESIN CEMENT; XP BOND; XP-BOND; ZIRCONIUM; ZIRCONIUM OXIDE;

ARTICLE; DENTAL BONDING; DENTAL ETCHING; DENTAL PROCEDURE; DENTAL SURGERY; MATERIALS TESTING; METHODOLOGY; SURFACE PROPERTY; TENSILE STRENGTH; TOOTH PROSTHESIS;

AIR ABRASION, DENTAL; COMPOSITE RESINS; DENTAL BONDING; DENTAL ETCHING; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; DENTIN-BONDING AGENTS; LIGHT-CURING OF DENTAL ADHESIVES; MATERIALS TESTING; RESIN CEMENTS; SURFACE PROPERTIES; TENSILE STRENGTH; ZIRCONIUM;

EID: 80053053788     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2011.07.002     Document Type: Article

References (57)

1. C. Piconi, and G. Maccauro Zirconia as a ceramic biomaterial Biomaterials 20 1999 1 25 (Pubitemid 29002541)
2. A. Raigrodski Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature J Prosthet Dent 92 2004 557 562 (Pubitemid 39593586)
3. R.G. Luthardt, M. Holzhuter, O. Sankuhl, V. Herold, J.D. Schnapp, and E. Kuhlisch Reliability and properties of ground Y-TZP-zirconia ceramics J Dent Res 81 2002 487 491
4. P.F. Manicone, P. Rossi Iommetti, and L. Raffaelli An overview of zirconia ceramics: basic properties and clinical applications J Dent 35 2007 819 826
5. S.O. Koutayas, T. Vagkopoulou, S. Pelekanos, P. Koidis, and J.R. Strub Zirconia in dentistry. Part 2. Evidence-based clinical breakthrough Eur J Esthet Dent 4 2009 348 380
6. S. Eschbach, S. Wolfart, F. Bohlsen, and M. Kern Clinical evaluation of all-ceramic posterior three-unit FDPs made of In-Ceram Zirconia Int J Prosthodont 22 2009 490 492
7. M. Tsumita, Y. Kokubo, C. Ohkubo, S. Sakurai, and S. Fukushima Clinical evaluation of posterior all-ceramic FPDs (Cercon): a prospective clinical pilot study J Prosthodont Res 54 2010 102 105
8. M.A. Bottino, S.M. Salazar-Marocho, F.P. Leite, V.C. Vásquez, and L.F. Valandro Flexural strength of glass-infiltrated zirconia/alumina-based ceramics and feldspathic veneering porcelains J Prosthodont 18 2009 417 420
9. J. Schmitt, S. Holst, M. Wichmann, S. Reich, M. Gollner, and J. Hamel Zirconia posterior fixed partial dentures: a prospective clinical 3-year follow-up Int J Prosthodont 22 2009 597 603
10. C. Mehl, K. Ludwig, M. Steiner, and M. Kern Fracture strength of prefabricated all-ceramic posterior inlay-retained fixed dental prostheses Dent Mater 26 2010 67 75
11. J. Tinschert, D. Zwez, R. Marx, and K.J. Anusavice Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconiabased ceramics J Dent 28 2000 529 535
12. M. Guazzato, M. Albakry, S.P. Ringer, and M.V. Swain Strength, fracture toughness and microstructure of a selection of all ceramic materials. Part II. Zirconia-based dental ceramics Dent Mater 20 2004 449 456
13. Z. Ozkurt, and E. Kazazolu Clinical success of zirconia in dental applications J Prosthodont 19 2010 64 68
14. M. Roediger, N. Gersdorff, A. Huels, and S. Rinke Prospective evaluation of zirconia posterior fixed partial dentures: four-year clinical results Int J Prosthodont 23 2010 141 148
15. F. Beuer, D. Edelhoff, W. Gernet, and J.A. Sorensen Three-year clinical prospective evaluation of zirconia-based posterior fixed dental prostheses (FDPs) Clin Oral Investig 13 2009 445 451
16. S. Wolfart, and M. Kern A new design for all-ceramic inlay-retained fixed partial dentures: a report of 2 cases Quintessence Int 37 2006 27 33 (Pubitemid 41820673)
17. R.P. Palacios, G.H. Johnson, K.M. Phillips, and A.J. Raigrodski Retention of zirconium oxide ceramic crowns with three types of cement J Prosthet Dent 96 2006 104 114 (Pubitemid 44189972)
18. M.B. Blatz, A. Sadan, and M. Kern Resin-ceramic bonding: a review of the literature J Prosthet Dent 89 2003 268 274 (Pubitemid 37304971)
19. K. Yoshida, Y. Tsuo, and M. Atsuta Bonding of dual-cured resin cement to zirconia ceramic using phosphate acid ester monomer and zirconate coupler J Biomed Mater Res B 77 2006 28 33
20. J. Lindgren, J. Smeds, and G. Sjögren Effect of surface treatments and aging in water on bond strength to zirconia Oper Dent 33 2008 675 681
21. J.R. Piascik, S.D. Wolter, and B.R. Stoner Development of a novel surface modification for improved bonding to zirconia Dent Mater 27 May (5) 2011 99 105
22. J.H. Phark An in vitro evaluation of the long-term resin bond to a new densely sintered high-purity zirconium-oxide ceramic surface J Prosthet Dent 101 2009 29 38
23. J. Chai, F.C. Chu, and T.W. Chow Effect of surface treatment on shear bond strength of zirconia to human dentin J Prosthodont 20 April (3) 2011 173 179
24. P. Magne, M.P. Paranhos, and L.H. Burnett Jr. New zirconia primer improves bond strength of resin-based cements Dent Mater 26 2010 345 352
25. S. Kitayama, T. Nikaido, R. Takahashi, L. Zhu, M. Ikeda, R.M. Foxton, A. Sadr, and J. Tagami Effect of primer treatment on bonding of resin cements to zirconia ceramic Dent Mater 26 5 2004 426 432
26. C.P. Ernst, E. Aksoy, E. Stender, and B. Willershausen Influence of different luting concepts on long term retentive strength of zirconia crowns Am J Dent 22 2009 122 128
27. M.B. Blatz, C. Richter, A. Sadan, and G.J. Chiche Critical appraisal. Resin bond to dental ceramics, Part II: high-strength ceramics J Esthet Restor Dent 16 5 2004 324 328
28. M.B. Blatz, G. Chiche, S. Holst, and A. Sadan Influence of surface treatment and simulated aging on bond strengths of luting agents to zirconia Quintessence Int 38 October (9) 2007 745 753
29. S.S. Atsu, M.A. Lilicarslan, H.C. Kucukesmen, and P.S. Aka Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin J Prosthet Dent 95 2006 430 436 (Pubitemid 43831079)
30. R. Tanaka, A. Fujishima, Y. Shibata, A. Manabe, and T. Miyazaki Cooperation of phosphate monomer and silica modification on zirconia J Dent Res 87 2008 666 670
31. H. Sato, D. Yamashita, and S. Ban Structural change of zirconia surfaces by sandblasting and heat treatment J Dent Mater 25 2006 338 343
32. S. Karakoca, and H. Yilmaz Influence of surface treatments on surface roughness, phase transformation, and biaxial flexural strength of Y-TZP ceramics J Biomed Mater Res B Appl Biomater 91 2 2009 930 937
33. T. Kosmac, C. Oblak, P. Jevnikar, N. Funduk, and L. Marion The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic Dent Mater 15 1999 426 433 (Pubitemid 129586772)
34. M. Guazzato, L. Quach, M. Albakry, and M.V. Swain Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramic J Dent 33 2005 9 18 (Pubitemid 40093557)
35. M.N. Aboushelib, C.J. Kleverlaan, and A.J. Feilzer Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia based materials J Prosthet Dent 98 2007 379 388
36. A. Casucci, E. Osorio, R. Osorio, F. Monticelli, M. Toledano, C. Mazzitelli, and M. Ferrari Influence of different surface treatments on surface zirconia frameworks J Dent 37 2009 891 897
37. A. Casucci, M. Mazzitelli, F. Monticelli, E. Osorio, F. Papacchini, and M. Ferrari Morphological analysis of three zirconium oxide ceramics: effect of surface treatments Dent Mater 26 August (8) 2010 751 760
38. M. Ferrari, M.C. Cagidiaco, A. Borracchini, and E. Bertelli Evaluation of a chemical etching solution for nickel-chromium-beryllium and chromium-cobalt alloys J Prosth Dent 62 1989 516 521
39. V.C. Bachhav, and M.A. Aras Zirconia-based fixed partial dentures: a clinical review Quintessence Int 42 February (2) 2011 173 182
40. M.N. Aboushelib, A.J. Feilzer, and C.J. Kleverlaan Bonding to zirconia using a new surface treatment J Prosthodont 19 July (5) 2010 340 346
41. A.N. Cavalcanti, R.M. Foxton, T.F. Watson, M.T. Oliveira, M. Giannini, and G.M. Marchi Y-TZP ceramics: key concepts for clinical application Oper Dent 34 2009 344 351
42. B. Mizrahi The anterior all-ceramic crown: a rationale for the choice of ceramic and cement Br Dent J 205 2008 251 255
43. R.C. de Oyagüe, F. Monticelli, M. Toledano, E. Osorio, M. Ferrari, and R. Osorio Influence of surface treatments and resin cement selection on bonding to densely-sintered zirconium-oxide ceramic Dent Mater 25 2009 172 179
44. M.N. Aboushelib, J.P. Matinlinna, Z. Salameh, and H. Ounsi Innovations in bonding to zirconia-based materials: part I Dent Mater 24 2008 1268 1272
45. S.M. Wegner, and M. Kern Long-term resin bond strength to zirconia ceramic J Adhes Dent 2 2000 139 147
46. M. Kern, and S.M. Wegner Bonding to zirconia ceramic: adhesion methods and their durability Dent Mater 14 1998 64 71 (Pubitemid 128419490)
47. S.M. Wegner, W. Gerdes, and M. Kern Effect of different artificial aging conditions on ceramic-composite bond strength Int J Prosthodont 15 2002 267 272
48. P. Derand, and T. Derand Bond strength of luting cements to zirconium oxide ceramics Int J Prosthodont 13 2000 131 135
49. Y. Tsuo, K. Yoshida, and M. Atsuta Effects of alumina-blasting and adhesive primers on bonding between resin luting agent and zirconia ceramics Dent Mater J 25 4 2006 669 674
50. M. Wolfart, F. Lehmann, S. Wolfart, and M. Kern Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods Dent Mater 23 2007 45 50 (Pubitemid 44880064)
51. D. Re, D. Augusti, I. Sailer, D. Spreafico, and A. Cerutti The effect of surface treatment on the adhesion of resin cements to Y-TZP Eur J Esthet Dent 3 2 2008 186 196
52. S.S. Atsu, M.A. Kilicarslan, H.C. Kucukesmen, and P.S. Aka Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin J Prosthet Dent 95 6 2006 430 436 (Pubitemid 43831079)
53. S.S. Scherrer, M. Cattani-Lorente, E. Vittecoq, F. de Mestral, J.A. Griggs, and H.W. Wiskott Fatigue behavior in water of Y-TZP zirconia ceramics after abrasion with 30 m silica-coated alumina particles Dent Mater 27 2 2011 28 42
54. H. Wang, M.N. Aboushelib, and A.J. Feilzer Strength influencing variables on CAD/CAM zirconia frameworks Dent Mater 24 2008 633 638 (Pubitemid 351389493)
55. B.R. Lawn, Y. Deng, and I.K. Lloyd Materials design of ceramic-based layer structures for crowns J Dent Res 81 2002 433 438
56. H. Mirmohammadi, M.N. Aboushelib, Z. Salameh, C.J. Kleverlaan, and A.J. Feilzer Influence of enzymatic and chemical degradation on zirconia resin bond strength after different surface treatments Am J Dent. 23 6 2010 327 330
57. Anusavice KJ. Mechanical properties of materials. In: Saunders WB, editors. Phillips' Science of Dental Materials. 11th 2003.